On Sat, 2012-06-09 at 18:13 +0200, Oliver Schinagl wrote:
Having been quite intrigued by this I coincidentally found an old raid controller of mine.
http://www.highpoint-tech.cn/USA/rr454.htm
Though it only has 64kb flash I'm guessing (the bios image is about 55k) after a swap of that chip, it may theoretically be possible, correct? Hi all,
So why would this only work on ICH based boards? What are changes of this working on older chipsets other then intel? Say VIA?
Oliver
Hi
64 kB is enough for SerialICE. I would first check the raid controller datasheet and PCB if you have more than 16 address lines in the first place.
Chances are there was something similar on most PCI chipsets, as it was one practical method for production-line programming in the case of soldered flash chips. Just don't expect that the possible hardware bootstrap is labeled or easily accessible on the mainboard.
Kyösti