Author: uwe Date: 2007-06-05 17:02:18 +0200 (Tue, 05 Jun 2007) New Revision: 2713
Modified: trunk/LinuxBIOSv2/util/flashrom/README trunk/LinuxBIOSv2/util/flashrom/board_enable.c trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c Log: flashrom: Document the newly supported IBM x3455 board and the now-supported Broadcom HT-1000 chipset (trivial).
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/LinuxBIOSv2/util/flashrom/README =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/README 2007-06-05 12:51:52 UTC (rev 2712) +++ trunk/LinuxBIOSv2/util/flashrom/README 2007-06-05 15:02:18 UTC (rev 2713) @@ -53,6 +53,7 @@ * IWILL DK8-HTX: use -m iwill:dk8_htx * Agami Aruma: use -m AGAMI:ARUMA * ASUS P5A: use -m asus:p5a +* IBM x3455: use -m ibm:x3455
ROM Layout Support @@ -153,6 +154,7 @@ AMD Geode SC1100 AMD AMD-8111 ATI SB400 +Broadcom HT-1000 Intel ICH0-ICH8 (all variations) Intel PIIX4/PIIX4E/PIIX4M NVIDIA CK804
Modified: trunk/LinuxBIOSv2/util/flashrom/board_enable.c =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/board_enable.c 2007-06-05 12:51:52 UTC (rev 2712) +++ trunk/LinuxBIOSv2/util/flashrom/board_enable.c 2007-06-05 15:02:18 UTC (rev 2713) @@ -250,10 +250,10 @@ { uint8_t byte;
- /* Set GPIO lines in HT1000 southbridge */ + /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ outb(0x45, 0xcd6); byte = inb(0xcd7); - outb(byte|0x20, 0xcd7); + outb(byte | 0x20, 0xcd7);
return 0; }
Modified: trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c 2007-06-05 12:51:52 UTC (rev 2712) +++ trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c 2007-06-05 15:02:18 UTC (rev 2713) @@ -387,12 +387,11 @@
}
- static int enable_flash_ht1000(struct pci_dev *dev, char *name) { - unsigned char byte; + uint8_t byte;
- /* Set the 4MB enable bit */ + /* Set the 4MB enable bit. */ byte = pci_read_byte(dev, 0x41); byte |= 0x0e; pci_write_byte(dev, 0x41, byte); @@ -462,7 +461,7 @@
{0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
- {0x1166, 0x0205, "BCM HT1000", enable_flash_ht1000}, + {0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000}, };
/*