Re: [LinuxBIOS] new target iei juki-511p/rocky-512

[Uwe Hermann]

On Mon, Jun 04, 2007 at 06:15:17PM +0600, Nikolay Petukhov wrote:
> 2007/6/3, Stefan Reinauer :
> > Please sign off the patch according to
> > http://www.linuxbios.org/Development_Guidelines#Sign-off_Procedure
> > so we can check this patch in!
>
> Add sign-off.

Thanks!

The Super I/O patch is committed as r2714, the JUKI-511P code in r2716,
both with minor cosmetic changes.

I also renamed the directory to juki-511p (minus vs. underscore).
> > What does not work? ide1? AFAICS the boards only have one IDE port!?
>
> The this boards has two IDE ports. IDE0 has 40-pin IDE connector. IDE1
> has CF connector.

Ah, ok. Does booting from IDE1 work with a proprietary BIOS? Try my
CS5530 patch, that _may_ fix the problem (it initializes both IDE0 and
IDE1). Some more IDE work may be needed in LinuxBIOS, though.

Please post a boot log with the CS5530 patch applied.
> +#dir /pc80
> +#config chip.h

Why is this commented? Not needed?
>    device pci 12.1 on  end		# SMI
>    device pci 12.2 on  end		# IDE
>    device pci 12.3 on  end 	# Audio
>  	device pci 12.4 on  end		# VGA onboard

With my CS5530 patch you might need to enable IDE0/IDE1 explicitly here:

register "ide0_enable" = "1"
      register "ide1_enable" = "1"

Thanks, Uwe.