On Fri, 16 Apr 2004, Dave Ashley wrote:
One thing I noticed in Dmitri's patch is it seemed to cut out all my code to initialize the VT1211's hardware monitor (used for temperature + voltage monitoring). Other stuff seemed to be hacked and slashed out that I found necessary, but didn't appear to be replaced elsewhere.
don't worry. I did not apply the patch Dmitri sent. I just used it as a guide to the actual changes I made. All your stuff is still in there. Check the CVS and you should see your stuff intact. I really need that serial port patch though.
So if it's this far along, it would be nice to get the SPD auto detection working. Maybe the path to that is integrate all these V1 changes into V2 and do it in V2.
That's the next step. Once you bless this V1 port, I start the V2 port. That will become the port of choice for EPIA-M.
I'll need some help with that one ... this is a time-available thing for me right now, but I'm giving it all the time I can.
ron