Hi Andi,
On 10.11.2007 09:45, Andreas B. Mundt wrote:
is it possible that there is no change at all in superiotool output?
Superiotool output should have changed for LDN 0x7 and NOLDN (the registers before LDN 0x0), the rest should be identical to the output before.
Or did I not propperly clean my build tree? (I did a ./buildtarget in the target directory after patching and a make clean prior to building as usual).
Try to "rm -r gigabyte/m57sli/m57sli", then run buildtarget again, then run "grep -r base=0x800 gigabyte/m57sli/m57sli". This should give you three lines if the patch was applied correctly.
./targets/gigabyte/m57sli/m57sli/failover/static.c: { .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO, .index=0x62, .base=0x800}, ./targets/gigabyte/m57sli/m57sli/fallback/static.c: { .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO, .index=0x62, .base=0x800}, ./targets/gigabyte/m57sli/m57sli/normal/static.c: { .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO, .index=0x62, .base=0x800},
Regards, Carl-Daniel