The "s" series are quite finiky when flashing; I flashes recently a T400s, so I'd assume your laptop also has a WSON8 chip. The pinout and the flashing procedure is the same; you only need to solder thin wires to the chip - there is no clip available for them. I'd suggest you also tape the raspberry and the T430s boards together - if the boards move around, there's a high risk you will rip the pads from the motheboard/chip.
On April 9, 2017 7:58:35 PM GMT+03:00, kitestramuort kitestramuort@autistici.org wrote:
The T430s is supported by coreboot, however there's very little documentation on the flashing procedure itself. I couldn't even identify the BIOS chip on the motherboard. From what I've read the chip is not SOIC8, unlike those on the non-S T430 and X230, therefore the raspberry pi method should not be applicable. Is desoldering the chip the only way to install Coreboot on this machine? Is there a guide/howto somewhere?
Thanks
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot