Hi,
2009/9/3 Stefan Reinauer stepan@coresystems.de:
Sebastian Lara wrote:
Hi,
I'm trying to revive a Linux Netwox eVelocity 2 Cluster with LinuxBIOS-1.1.7.8 and Etherboot 5.2 on compute nodes. After some trouble, I have access to a shell after node system installation over network. My problem now is that I can't get localboot to work.
What's the error?
Boot from (N)etwork (D)isk or (Q)uit? D
Probing pci disk... [IDE]LBA48 mode disk-1 78150744k cap: 2f00 Searching for image... ................................<abort> Probing pci disk... [IDE] Probing isa disk... <sleep>
Etherboot searches for an ELF header in the first 8K. I don't really know how can I do this. I had tried to use a ELF image of the kernel installed in the node but it doesn't work.
I need to know if I can re-burn the BIOS with a newer version of coreboot or something else, so I can use PXE and use GRUB for booting from local.
What mainboard type is that? Can you post a boot log from serial console?
It's there some way to know the mainboard type without open a node case? Get permission to do that may take some time.
Here is the boot log:
LinuxBIOS-1.1.7.8Normal Fri Jan 7 13:55:58 MST 2005 starting... setting up resource map....done. 02 nodes initialized. ht reset -
LinuxBIOS-1.1.7.8Normal Fri Jan 7 13:55:58 MST 2005 starting... setting up resource map....done. 02 nodes initialized. Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Initializing memory: done Clearing initial memory region: done Ram4 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.7.8Normal Fri Jan 7 13:55:58 MST 2005 booting... Enumerating buses... PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] bus ops PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] bus ops PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 HyperT reset not needed PCI: pci_scan_bus for bus 1 PCI: 01:01.0 [1022/7450] bus ops PCI: 01:01.0 [1022/7450] enabled PCI: 01:01.1 [1022/7451] ops PCI: 01:01.1 [1022/7451] enabled PCI: 01:02.0 [1022/7450] bus ops PCI: 01:02.0 [1022/7450] enabled PCI: 01:02.1 [1022/7451] ops PCI: 01:02.1 [1022/7451] enabled PCI: 01:03.0 [1022/7460] bus ops PCI: 01:03.0 [1022/7460] enabled PCI: 01:04.0 [1022/7468] bus ops PCI: 01:04.0 [1022/7468] enabled PCI: 01:04.1 [1022/7469] ops PCI: 01:04.1 [1022/7469] enabled PCI: 01:04.2 [1022/746a] bus ops PCI: 01:04.2 [1022/746a] enabled PCI: 01:04.3 [1022/746b] bus ops PCI: 01:04.3 [1022/746b] enabled PCI: 01:04.5 No device operations PCI: 01:04.6 [1022/746e] ops PCI: 01:04.6 [1022/746e] enabled PCI: pci_scan_bus for bus 2 PCI: 02:03.0 [14e4/16a6] enabled PCI: 02:04.0 [14e4/16a6] enabled PCI: pci_scan_bus returning with max=02 PCI: pci_scan_bus for bus 3 PCI: 03:01.0 [15b3/5a46] enabled PCI: pci_scan_bus for bus 4 PCI: 04:00.0 [15b3/5a44] enabled PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus for bus 5 PCI: 05:00.0 [1022/7464] bus ops PCI: 05:00.0 [1022/7464] enabled PCI: 05:00.1 [1022/7464] bus ops PCI: 05:00.1 [1022/7464] enabled PCI: 05:00.2 No device operations PCI: 05:01.0 No device operations PCI: 05:06.0 [1002/4752] enabled PCI: pci_scan_bus returning with max=05 PNP: 002e.0 disabled PNP: 002e.1 disabled PNP: 002e.2 disabled PNP: 002e.3 enabled PNP: 002e.4 disabled PNP: 002e.5 disabled PNP: 002e.6 enabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled I2C: 70 enabled I2C: 50 enabled I2C: 51 enabled I2C: 52 enabled I2C: 53 enabled I2C: 54 enabled I2C: 55 enabled I2C: 56 enabled I2C: 57 enabled PCI: pci_scan_bus returning with max=05 PCI: pci_scan_bus returning with max=05 CPU: APIC: 00 enabled CPU: APIC: 01 enabled done Allocating resources... PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem PCI: 03:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 4 io PCI: 01:02.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 3 io PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 5 prefmem Allocating VGA resource PCI: 05:06.0 PCI: 00:18.0 1b8 <- [0x00e8000000 - 0x00f07fffff] prefmem <node 0 link 0> PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000002fff] io <node 0 link 0> PCI: 00:18.0 1b0 <- [0x00f8000000 - 0x00f93fffff] mem <node 0 link 0> PCI: 01:01.0 20 <- [0x00f9100000 - 0x00f91fffff] bus 2 mem PCI: 02:03.0 10 <- [0x00f9100000 - 0x00f910ffff] mem PCI: 02:04.0 10 <- [0x00f9110000 - 0x00f911ffff] mem PCI: 01:01.1 10 <- [0x00f9300000 - 0x00f9300fff] mem PCI: 01:02.0 24 <- [0x00e8000000 - 0x00f07fffff] bus 3 prefmem PCI: 01:02.0 20 <- [0x00f9200000 - 0x00f92fffff] bus 3 mem PCI: 03:01.0 24 <- [0x00e8000000 - 0x00f07fffff] bus 4 prefmem PCI: 03:01.0 20 <- [0x00f9200000 - 0x00f92fffff] bus 4 mem PCI: 04:00.0 10 <- [0x00f9200000 - 0x00f92fffff] mem PCI: 04:00.0 18 <- [0x00f0000000 - 0x00f07fffff] prefmem PCI: 04:00.0 20 <- [0x00e8000000 - 0x00efffffff] prefmem PCI: 01:02.1 10 <- [0x00f9301000 - 0x00f9301fff] mem PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 5 io PCI: 01:03.0 20 <- [0x00f8000000 - 0x00f90fffff] bus 5 mem PCI: 05:00.0 10 <- [0x00f9000000 - 0x00f9000fff] mem PCI: 05:00.1 10 <- [0x00f9001000 - 0x00f9001fff] mem PCI: 05:06.0 10 <- [0x00f8000000 - 0x00f8ffffff] mem PCI: 05:06.0 14 <- [0x0000001000 - 0x00000010ff] io PCI: 05:06.0 18 <- [0x00f9002000 - 0x00f9002fff] mem PNP: 002e.3 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.3 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.6 60 <- [0x0000000060 - 0x0000000067] io PNP: 002e.6 62 <- [0x0000000064 - 0x000000006b] io PNP: 002e.6 70 <- [0x0000000001 - 0x0000000001] irq PCI: 01:04.1 20 <- [0x00000028a0 - 0x00000028af] io PCI: 01:04.2 10 <- [0x0000002880 - 0x000000289f] io PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io PCI: 01:04.6 10 <- [0x0000002400 - 0x00000024ff] io PCI: 01:04.6 14 <- [0x0000002800 - 0x000000287f] io PCI: 00:18.3 94 <- [0x00f4000000 - 0x00f7ffffff] mem <gart> PCI: 00:19.3 94 <- [0x00f4000000 - 0x00f7ffffff] mem <gart> done. Enabling resourcess... PCI: 00:18.0 cmd <- 140 PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 146 PCI: 02:03.0 cmd <- 142 PCI: 02:04.0 cmd <- 142 PCI: 01:01.1 subsystem <- 161f/3016 PCI: 01:01.1 cmd <- 146 PCI: 01:02.0 bridge ctrl <- 0003 PCI: 01:02.0 cmd <- 146 PCI: 03:01.0 bridge ctrl <- 0003 PCI: 03:01.0 cmd <- 146 PCI: 04:00.0 cmd <- 142 PCI: 01:02.1 subsystem <- 161f/3016 PCI: 01:02.1 cmd <- 146 PCI: 01:03.0 bridge ctrl <- 000b PCI: 01:03.0 cmd <- 147 PCI: 05:00.0 subsystem <- 161f/3016 PCI: 05:00.0 cmd <- 142 PCI: 05:00.1 subsystem <- 161f/3016 PCI: 05:00.1 cmd <- 142 PCI: 05:06.0 cmd <- 1c3 PCI: 01:04.0 subsystem <- 161f/3016 PCI: 01:04.0 cmd <- 14f PCI: 01:04.1 subsystem <- 161f/3016 PCI: 01:04.1 cmd <- 141 PCI: 01:04.2 subsystem <- 161f/3016 PCI: 01:04.2 cmd <- 141 PCI: 01:04.3 subsystem <- 161f/3016 PCI: 01:04.3 cmd <- 141 PCI: 01:04.6 subsystem <- 161f/3016 PCI: 01:04.6 cmd <- 141 PCI: 00:18.1 subsystem <- 161f/3016 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 161f/3016 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 PCI: 00:19.0 cmd <- 140 PCI: 00:19.1 subsystem <- 161f/3016 PCI: 00:19.1 cmd <- 140 PCI: 00:19.2 subsystem <- 161f/3016 PCI: 00:19.2 cmd <- 140 PCI: 00:19.3 cmd <- 140 done. Initializing devices... Root Device init PCI: 00:18.0 init PCI: 01:01.0 init PCI: 01:02.0 init PCI: 01:03.0 init PCI: 01:04.0 init RTC Init enabling HPET @0xfed00000 PNP: 002e.3 init PNP: 002e.6 init PCI: 01:04.1 init IDE1 IDE0 PCI: 01:04.3 init set power on after power fail PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device f5a Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Clearing memory 0K - 1048576K: --------------- done Setting up local apic... apic_id: 0 done. CPU #0 Initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device f5a Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Clearing memory 1048576K - 2097152K: ---------------- done Setting up local apic... apic_id: 1 done. CPU #1 Initialized All AP CPUs stopped Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... /home/cwxbuild/modules/linuxbios/hdama/freebios2/src/arch/i386/boot/pirq_routing.c: 28:check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. Wrote the mp table end at: 00000020 - 00000224 Wrote linuxbios table at: 00000500 - 00000d88 checksum 9e78
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
Found ELF candiate at offset 0 Loading Etherboot version: 5.2.4js1 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x41e65 offset 0xc0 filesize 0x993a (cleaned up) New segment addr 0x20000 size 0x41e65 offset 0xc0 filesize 0x993a Loading Segment: addr: 0x000000007ffc4000 memsz: 0x0000000000010000 filesz: 0x000000000000993a Clearing Segment: addr: 0x000000007ffcd93a memsz: 0x00000000000066c6 Loading Segment: addr: 0x0000000000030000 memsz: 0x0000000000031e65 filesz: 0x0000000000000000 Clearing Segment: addr: 0x0000000000030000 memsz: 0x0000000000031e65 Jumping to boot code at 0x20000 ROM segment 0x0000 length 0x0000 reloc 0x00020000 CPU 2486 Mhz Etherboot 5.2.4js1 (GPL) http://etherboot.org ELF64 ELF with TFTP SLAM LACP for [EEPRO100][E1000][3C90X][TG3][IDE] Relocating _text from: [00029930,00063080) to [7fec68b0,7ff00000) �Probing pci nic... (D)isk or (Q)uit? [tg3-5702X]Ethernet addr: 00:50:45:5C:34:1A Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit) Link is up at 100 Mbps, full duplex. Searching for server (DHCP)... ...Me: 10.1.255.254, Server: 10.1.1.1, Gateway 10.1.1.1 Loading 10.1.1.1:vmlinuz.vo ...(ELF)... ................
Thanks for the help.