Hi Naveed, Currently, the bootorder file would need to be manually added after the build. https://www.coreboot.org/SeaBIOS#Configuring_boot_order
I just pushed a patch to allow the bootorder to be added during the build process. https://review.coreboot.org/15076
Martin
On Tue, May 31, 2016 at 2:28 AM, Naveed Ghori naveed.ghori@dti.com.au wrote:
What is the easiest way to do this.
Is there already a way to do it cleanly and have the bootorder file in the mainboard area or will I have to add a patch to add it on to CBFS.
Regards,
Naveed Ghori | Lead Firmware & Driver Engineer
DTI Group Ltd | Transit Security & Surveillance
31 Affleck Road, Perth Airport, Western Australia 6105, AU
P +61 8 9373 2905,151 | F +61 8 9479 1190 | naveed.ghori@dti.com.au
Visit our website www.dti.com.au
The information contained in this email is confidential. If you receive this email in error, please inform DTI Group Ltd via the above contact details. If you are not the intended recipient, you may not use or disclose the information contained in this email or attachments.
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot