Add bootorder file for Seabios

[Naveed Ghori]

What is the easiest way to do this.
Is there already a way to do it cleanly and have the bootorder file in the mainboard area or will I have to add a patch to add it on to CBFS.

Regards,

Naveed Ghori | Lead Firmware & Driver Engineer

DTI Group Ltd | Transit Security & Surveillance

31 Affleck Road, Perth Airport, Western Australia 6105, AU

P +61 8 9373 2905,151 | F [phone] | [e-mail]

Visit our website www.dti.com.auhttp://www.dti.com.au

The information contained in this email is confidential. If you receive this email in error, please inform DTI Group Ltd via the above contact details. If you are not the intended recipient, you may not use or disclose the information contained in this email or attachments.

[Martin Roth]

Hi Naveed,
  Currently, the bootorder file would need to be manually added after the build.
https://www.coreboot.org/SeaBIOS#Configuring_boot_order

I just pushed a patch to allow the bootorder to be added during the
build process.
https://review.coreboot.org/15076

Martin

On Tue, May 31, 2016 at 2:28 AM, Naveed Ghori  wrote:
> What is the easiest way to do this.
>
> Is there already a way to do it cleanly and have the bootorder file in the
> mainboard area or will I have to add a patch to add it on to CBFS.
>
> Regards,
>
> Naveed Ghori | Lead Firmware & Driver Engineer
>
> DTI Group Ltd | Transit Security & Surveillance
>
> 31 Affleck Road, Perth Airport, Western Australia 6105, AU
>
> P +61 8 9373 2905,151 | F [phone] | [e-mail]
>
> Visit our website www.dti.com.au
>
> The information contained in this email is confidential. If you receive this
> email in error, please inform DTI Group Ltd via the above contact details.
> If you are not the intended recipient, you may not use or disclose the
> information contained in this email or attachments.