Hello,
thanks for all suggestions so far. I can now boot the board (and my CPU, a "Brisbane") with the following modifications:
Index: src/cpu/amd/model_fxx/model_fxx_init.c =================================================================== --- src/cpu/amd/model_fxx/model_fxx_init.c (revision 2699) +++ src/cpu/amd/model_fxx/model_fxx_init.c (working copy) @@ -615,6 +615,7 @@ { X86_VENDOR_AMD, 0x40f82 }, /* S1g1:Turion64 x2 */ { X86_VENDOR_AMD, 0x40ff2 }, /* DH-F2 Socket AM2: Athlon64 */ { X86_VENDOR_AMD, 0x50ff2 }, /* DH-F2 Socket AM2: Athlon64 */ + { X86_VENDOR_AMD, 0x60fb1 }, /* DH-F2??? Socket AM2: Athlon64 Brisbane*/ { X86_VENDOR_AMD, 0x40fc2 }, /* S1g1:Turion64 */ { X86_VENDOR_AMD, 0x40f13 }, /* JH-F3 Socket F (1207): Opteron Dual Core */ { X86_VENDOR_AMD, 0x40f33 }, /* AM2 : Opteron Dual Core/Athlon64 x2/ Athlon64 FX Dual Core */
I do not know if this is enough or if some other parameters should be adapted. Some issues remain:
-powernow does not work, and the cpu freq. is at 2.5 GHz (proprietary BIOS: max cpu freq. 2.6 GHz)
-having booted with linuxbios, flashroom fails to erase (and therefore flash) any other BIOS
-some problems with X: with the proprietary BIOS the machine freezes using the free nv driver (02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS]). It works with linuxbios, but I have to log in twice with no cursor the first time. The nvidia driver does not work with linuxbios.
-I had to use the delay in filo.c (cmp. http://www.linuxbios.org/GIGABYTE_GA-M57SLI-S4_Build_Tutorial)
-it takes quite long to load vmlinuz and the initrd.img. Probably due to: IDE_DISK_POLL_DELAY = 1 (?)
-still the "Fallback" bios is booted, although I could not find any difference in the configuration of standard and fallback BIOS. The same file.elf was used.
Any suggestions and ideas are wellcome!
Thanks,
Andi
Below find the serial output: ====================================
LinuxBIOS-2.0.0_m57sli_Fallback Fri May 25 16:32:21 CEST 2007 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 core0 started: started ap apicid: 01 SBLink=00 NC node|link=00 begin msr fid, vid 3107121207110202 set fid failed for apicid =00 end msr fid, vid 3107120707110210 mcp55_num:01 ht reset -
LinuxBIOS-2.0.0_m57sli_Fallback Fri May 25 16:32:21 CEST 2007 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 core0 started: started ap apicid: 01 SBLink=00 NC node|link=00 begin msr fid, vid 3107120707110210 set fid failed for apicid =00 end msr fid, vid 3107120707110210 mcp55_num:01 Ram1.00 Ram2.00 Unbuffered 333Mhz Interleaved RAM: 0x00400000 KB Ram3 dimm_mask = 00000033 x4_mask = 00000000 x16_mask = 00000000 single_rank_mask = 00000000 ODC = 00111322 Addr Timing= 002b2220 Initializing memory: done RAM: 0x00500000 KB Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=14 done set DQS timing:DQSPos: 00 done set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=34 done Total DQS Training : tsc [00]=000000004599b8b0 Total DQS Training : tsc [01]=00000000475a1098 Total DQS Training : tsc [02]=00000000a33aa32a Total DQS Training : tsc [03]=00000000a57e3581 Ram4 v_esp=000cee78 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffdf000 dst=00100000 linxbios_ram.nrv2b length = 0000d633 linxbios_ram.bin length = 00022550 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_m57sli_Fallback Sun May 27 21:19:37 CEST 2007 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:00.0 [10de/0369] enabled PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010 PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [10de/0369] enabled PCI: 00:01.0 [10de/0360] enabled PCI: 00:01.1 [10de/0368] enabled PCI: 00:01.2 [10de/036a] enabled PCI: 00:01.3 [10de/036b] enabled PCI: 00:02.0 [10de/036c] enabled PCI: 00:02.1 [10de/036d] enabled PCI: 00:04.0 [10de/036e] enabled PCI: 00:05.0 [10de/037f] enabled PCI: 00:05.1 [10de/037f] enabled PCI: 00:05.2 [10de/037f] enabled PCI: 00:06.0 [10de/0370] enabled PCI: 00:06.1 [10de/0371] enabled PCI: 00:08.0 [10de/0373] enabled PCI: 00:0a.0 [10de/0376] enabled PCI: 00:0b.0 [10de/0374] enabled PCI: 00:0c.0 [10de/0374] enabled PCI: 00:0d.0 [10de/0378] enabled PCI: 00:0e.0 [10de/0375] enabled PCI: 00:0f.0 [10de/0377] enabled PNP: 002e.0 disabled PNP: 002e.1 enabled PNP: 002e.2 disabled PNP: 002e.3 disabled PNP: 002e.4 enabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled PCI: pci_scan_bus for bus 01 PCI: pci_scan_bus returning with max=001 PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: pci_scan_bus returning with max=005 PCI: pci_scan_bus for bus 06 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus for bus 07 PCI: 07:00.0 [10de/0392] enabled PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 done Allocating resources... Reading resources... PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem Done reading resources. Allocating VGA resource PCI: 07:00.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0> PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0> PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0> PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 07 mem PCI: 07:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem PCI: 07:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64 PCI: 07:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64 PCI: 07:00.0 24 <- [0x0000001000 - 0x000000107f] io PCI: 07:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart> Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 00:00.0 subsystem <- 1022/2b80 PCI: 00:00.0 cmd <- 146 PCI: 00:01.0 subsystem <- 1022/2b80 PCI: 00:01.0 cmd <- 14f mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297 mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237 mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 PCI: 00:01.1 subsystem <- 1022/2b80 PCI: 00:01.1 cmd <- 141 PCI: 00:01.2 cmd <- 540 PCI: 00:01.3 cmd <- 142 PCI: 00:02.0 subsystem <- 1022/2b80 PCI: 00:02.0 cmd <- 142 PCI: 00:02.1 subsystem <- 1022/2b80 PCI: 00:02.1 cmd <- 142 PCI: 00:04.0 subsystem <- 1022/2b80 PCI: 00:04.0 cmd <- 141 PCI: 00:05.0 subsystem <- 1022/2b80 PCI: 00:05.0 cmd <- 143 PCI: 00:05.1 subsystem <- 1022/2b80 PCI: 00:05.1 cmd <- 143 PCI: 00:05.2 subsystem <- 1022/2b80 PCI: 00:05.2 cmd <- 143 PCI: 00:06.0 bridge ctrl <- 0a03 PCI: 00:06.0 cmd <- 144 PCI: 00:06.1 subsystem <- 1022/2b80 PCI: 00:06.1 cmd <- 142 PCI: 00:08.0 subsystem <- 1022/2b80 PCI: 00:08.0 cmd <- 143 PCI: 00:0a.0 bridge ctrl <- 0003 PCI: 00:0a.0 cmd <- 140 PCI: 00:0b.0 bridge ctrl <- 0003 PCI: 00:0b.0 cmd <- 140 PCI: 00:0c.0 bridge ctrl <- 0003 PCI: 00:0c.0 cmd <- 140 PCI: 00:0d.0 bridge ctrl <- 0003 PCI: 00:0d.0 cmd <- 140 PCI: 00:0e.0 bridge ctrl <- 0003 PCI: 00:0e.0 cmd <- 140 PCI: 00:0f.0 bridge ctrl <- 000b PCI: 00:0f.0 cmd <- 147 PCI: 07:00.0 cmd <- 143 PCI: 00:18.1 subsystem <- 1022/2b80 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1022/2b80 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b Initializing CPU #0 CPU: vendor AMD device 60fb1 CPU: family 0f, model 6b, stepping 01 Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ Setting up local apic... apic_id: 0x00 done. ECC Disabled CPU #0 Initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device 60fb1 CPU: family 0f, model 6b, stepping 01 Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ Setting up local apic... apic_id: 0x01 done. CPU #1 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:01.0 init set power on after power fail RTC Init Invalid CMOS LB checksum PNP: 002e.1 init PNP: 002e.4 init FAN_CTL: reg = 0x02a9, read value = 0x50 FAN_CTL: reg = 0x02a9, writing value = 0xd7 PNP: 002e.5 init PNP: 002e.6 init PCI: 00:01.1 init PCI: 00:02.1 init PCI: 00:04.0 init IDE0 PCI: 00:05.0 init SATA S SATA P PCI: 00:05.1 init SATA S SATA P PCI: 00:05.2 init SATA S SATA P PCI: 00:06.0 init dev_root mem base = 0x00e0000000 [0x50] <-- 0xe0000000 PCI: 00:06.1 init base = f6140000 codec_mask = 01 codec viddid: 10ec0883 No verb! PCI: 00:08.0 init MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1 PCI: 00:0a.0 init PCI: 00:0b.0 init PCI: 00:0c.0 init PCI: 00:0d.0 init PCI: 00:0e.0 init PCI: 00:0f.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:01.2 init PCI: 00:01.3 init PCI: 07:00.0 init rom address for PCI: 07:00.0 = f6000000 copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xf600 bytes entering emulator halt_sys: file /home/andi/freeBIOS/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387 Devices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 00000274 Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote linuxbios table at: 00000530 - 00000df8 checksum cbc3
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 New segment addr 0x100000 size 0x3b960 offset 0xc0 filesize 0x11948 (cleaned up) New segment addr 0x100000 size 0x3b960 offset 0xc0 filesize 0x11948 New segment addr 0x13b960 size 0x48 offset 0x11a20 filesize 0x48 (cleaned up) New segment addr 0x13b960 size 0x48 offset 0x11a20 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x00000000bff80000 memsz: 0x000000000003b960 filesz: 0x0000000000011948 Clearing Segment: addr: 0x00000000bff91948 memsz: 0x000000000002a018 Loading Segment: addr: 0x00000000bffbb960 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x10d184 FILO version 0.5 (andi@flashgordon) Sun May 27 20:47:38 CEST 2007 menu: hde5:/boot/grub/menu.lst hde: LBA48 250GB: SAMSUNG SP2504C Mounted ext2fs Press any key to continue. Press any key to continue. Press any key to continue.
FILO 0.5
+-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernel arguments before booting, or 'c' for a command-line. Debian GNU/Linux, kernel 2.6.18-4-amd64 Debian GNU/Linux, kernel 2.6.18-4-amd64 (single-user mode) Debian GNU/Linux Lenny, kernel 2.6.18-amd64 Debian GNU/Linux Sid, kernel 2.6.21-amd64 The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. The highlighted entry will be booted automatically in 2 seconds. The highlighted entry will be booted automatically in 1 seconds. Booting 'Debian GNU/Linux Lenny, kernel 2.6.18-amd64'
root (hd4,4) kernel /boot/vmlinuz-2.6.18-4-amd64 root=/dev/sda2 ro acpi_use_timer_overri de console=tty0 console=ttyS0,115200 vga=791 initrd /boot/initrd.img-2.6.18-4-amd64 boot
Booting 'hde5:/boot/vmlinuz-2.6.18-4-amd64 root=/dev/sda2 ro acpi_use_timer_ove rride console=tty0 console=ttyS0,115200 vga=791 initrd=/boot/initrd.img-2.6.18- 4-amd64' Found Linux version 2.6.18-4-amd64 (unknown@Debian) #1 SMP Mon Mar 26 11:36:53 CEST 2007 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Bootdata ok (command line is root=/dev/sda2 ro acpi_use_timer_override console=tty0 console=ttyS0,115200 vga=791) Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 11:36:53 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000c0000000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI not present or invalid. ACPI: Unable to locate RSDP Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 0000000140000000 Using node hash shift of 63 Bootmem setup node 0 0000000000000000-0000000140000000 Nvidia board detected. Ignoring ACPI timer override. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: GIGABYTE Product ID: M57SLI APIC at: 0xFEE00000 Processor #0 15:11 APIC version 16 Processor #1 15:11 APIC version 16 I/O APIC #2 Version 17 at 0xF6144000. Setting APIC routing to physical flat Processors: 2 Allocating PCI resources starting at c4000000 (gap: c0000000:40000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 1029672 Kernel command line: root=/dev/sda2 ro acpi_use_timer_override console=tty0 console=ttyS0,115200 vga=791 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. time.c: Detected 2400.010 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ f0000000 size 64 MB Memory: 4107000k/5242880k available (1930k kernel code, 86916k reserved, 868k data, 176k init) Calibrating delay using timer specific routine.. 4808.82 BogoMIPS (lpj=9617640) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Using IO-APIC 2 GSI 16 sharing vector 0x91 and IRQ 16 GSI 17 sharing vector 0x99 and IRQ 17 GSI 18 sharing vector 0xA1 and IRQ 18 GSI 19 sharing vector 0xA9 and IRQ 19 GSI 20 sharing vector 0xB1 and IRQ 20 GSI 21 sharing vector 0xB9 and IRQ 21 GSI 22 sharing vector 0xC1 and IRQ 22 GSI 23 sharing vector 0xC9 and IRQ 23 Using local APIC timer interrupts. result 12500064 Detected 12.500 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.35 BogoMIPS (lpj=9600714) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 687 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=187 checking if image is initramfs... it is Freeing initrd memory: 5292k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Using IRQ router default [10de/0370] at 0000:00:06.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 201 PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 201 PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 201 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 193 PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 153 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ f0000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: 1000-1fff MEM window: f4000000-f60fffff PREFETCH window: e0000000-efffffff NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1180702708.720:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Freeing unused kernel memory: 176k freed Loading, please wait... input: AT Translated Set 2 keyboard as /class/input/input0 Begin: Loading essential drivers... ... Done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.18-4-amd64/kernel/drivers/acpi/fan.ko): No such device FATAL: Error inserting thermal (/lib/modules/2.6.18-4-amd64/kernel/drivers/acpi/thermal.ko): No such device Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: irq 201, io mem 0xf614a000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio usb 1-2: new high speed USB device using ehci_hcd and address 3 hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive usb 1-2: configuration #1 chosen from 1 choice ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 193, io mem 0xf6145000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected SCSI subsystem initialized ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq 177 ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq 177 scsi0 : sata_nv Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb 2-1: new low speed USB device using ohci_hcd and address 2 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA7, 488395055 sectors: LBA48 NCQ (depth 0/32) usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev ata1.00: configured for UDMA/133 scsi1 : sata_nv input: HID 1241:1166 as /class/input/input1 input: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x3017 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 ata3: SATA max UDMA/133 cmd 0x3020 ctl 0x3092 bmdma 0x2CE0 irq 201 ata4: SATA max UDMA/133 cmd 0x3030 ctl 0x30A2 bmdma 0x2CE8 irq 201 scsi3 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x3027 scsi4 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x3037 ata5: SATA max UDMA/133 cmd 0x3040 ctl 0x30B2 bmdma 0x2CF0 irq 185 ata6: SATA max UDMA/133 cmd 0x3050 ctl 0x30C2 bmdma 0x2CF8 irq 185 scsi5 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x3047 scsi6 : sata_nv ata6: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x3057 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Running /scripts/local-premount ... kinit: name_to_dAttempting manual resume ev_t(/dev/sda1) = sda1(8,1) kinit: trying to resume from /dev/sda1 kinit: No resume image, doing normal boot... Done. kjournald starting. Commit interval 5 seconds Begin: Running /EXT3-fs: mounted filesystem with ordered data mode. scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...ts: Compaq touchscreen protocol output i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2c40 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2c80 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Vendor: cnmemory Model: cnmemory Rev: 6.50 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 1970175 512-byte hdwr sectors (1009 MB) input: PC Speaker as /class/input/input2 sdb: Write Protect is off sdb: assuming drive cache: write through SCSI device sdb: 1970175 512-byte hdwr sectors (1009 MB) sdb: Write Protect is off sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... done. GActivating swap...Adding 7815580k swap on /dev/sda1. Priority:-1 extents:1 across:7815580k done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /dev/sda2: clean, 168003/2443200 files, 1208371/EXT3 FS on sda2, 4883760 blocks internal journal done. Setting the system clock.. Cleaning up ifupdown.... Loading kernel modules...loop: loaded (max 8 devices) ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure done. Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com . Checking file systems...fsck 1.40-WIP (14-Nov-2006) /dev/sda3: clean, 11920/4889248 files, 232043/9765511 blocks /dev/sda5: clean, 28582/1281696 files, 207890/2560351 blocks done. Setting kernel variables...done. Mounting local filesystems...kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. done. Activating swapfile swap...done. Detecting hardware...Setting up networking.... Configuring network interfaces...done. Starting portmap daemon.... Setting sensors limits: done. Setting console screen modes and fonts. RSetting console screen modes and fonts. Setting up ALSA...done. INIT: Entering runlevel: 2 Starting system log daemon.... Starting kernel log daemon.... Starting virtual private network daemon:. Starting portmap daemon...Already running.. Starting HP Linux Printing and Imaging System: hpiod hpssd. Starting BitTorrent tracker: disabled in /etc/default/bittorrent. Starting console-log:Couldnt get a file descriptor referring to the console E: openvt failed. headless system?...failed. Starting Common Unix Printing System: cupsdlp: driver loaded but no devices found ppdev: user-space parallel port driver . Starting system message bus: dbus. Starting Hardware abstraction layer: hald. Starting DHCP D-Bus daemon: dhcdbd. Starting network connection manager: NetworkManager. Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Starting network events dispatcher: NetworkManagerDispatcher. Starting DirMngr: dirmngr. Starting MTA: exim4. Starting LAN Information Server: lisa. Starting internet superserver: inetd. Starting powernowd: required sysfs objects not found! Read /usr/share/doc/powernowd/README.Debian for more information. Starting file alteration monitor: FAM. Starting GNOME Display Manager: gdm. Starting NFS common utilities: statd. Starting NTP server: ntpd. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Starting anac(h)ronistic cron: anacron. Starting deferred execution scheduler: atd. Starting periodic command scheduler: crond. mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining Not starting K Display Manager (kdm); it is not the default display manager. mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
================================================