coreboot

coreboot@coreboot.org

10 participants
39711 discussions

答复: 答复: S4882 Support Done
by YhLu 25 Mar '04

25 Mar '04

Please try this one. Remove the mindev in struct. And use next_unitid to calculate the dev min and max. Amd8151 is in dev 7 and 8. because Unit ID count for amd 8131 is 2 and amd 8111 is 4. YH. -----邮件原件----- 发件人: Li-Ta Lo [mailto:ollie@lanl.gov] 发送时间: 2004年3月25日 10:00 收件人: YhLu 抄送: 'ron minnich'; 'Stefan Reinauer'; 'ebiederman(a)lnxi.com'; 'linuxbios(a)clustermatic.org' 主题: Re: 答复: S4882 Support Done On Thu, 2004-03-25 at 10:58, YhLu wrote: > Ron/Ollie, > > Can you verify it on S2885? Because at this time only s2885 has two > incoherent links to AMD8151 and AMD8131 in CPU0. > It works on S2885. I will commit it soon. Ollie

2 1

答复: S4882 Support Done
by YhLu 25 Mar '04

25 Mar '04

Ron/Ollie, Can you verify it on S2885? Because at this time only s2885 has two incoherent links to AMD8151 and AMD8131 in CPU0. Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 23:04 收件人: YhLu; ron minnich 抄送: Stefan Reinauer; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: 答复: S4882 Support Done Ron, Please commit the s2885 support. It make ht_reset in auto.c works with s2885. Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 13:19 收件人: ron minnich 抄送: Stefan Reinauer; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: S4882 Support Done Ron, Please commit the s4882 support code. 1. Add S4882 support. 2. Modify auto.c for s2881, s2885, s4880. 3. Add some optimize_link calling in set_smp. Regards YH

2 1

S2885 support
by YhLu 25 Mar '04

25 Mar '04

Please refer to bootlog for s2885. I have to comment out the optimized link in coherent_ht.c, and soft_reset to get the pci_regs dump in auto.c stage. You may find that the 0:5.0 and 0:6.0 are AMD8151 bridge and device. And 0:1.0 ,0:1.1, 0:2.0, 0:2.1 are amd8131. 0:3.0 and 0:4.x are amd8111 Regards YH. -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月25日 9:52 收件人: 'ron minnich' 抄送: 'Stefan Reinauer'; 'ebiederman(a)lnxi.com'; 'linuxbios(a)clustermatic.org' 主题: 答复: S4882 Support Done Ron/Ollie, Can you verify it on S2885? Because at this time only s2885 has two incoherent links to AMD8151 and AMD8131 in CPU0. Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 23:04 收件人: YhLu; ron minnich 抄送: Stefan Reinauer; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: 答复: S4882 Support Done Ron, Please commit the s2885 support. It make ht_reset in auto.c works with s2885. Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 13:19 收件人: ron minnich 抄送: Stefan Reinauer; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: S4882 Support Done Ron, Please commit the s4882 support code. 1. Add S4882 support. 2. Modify auto.c for s2881, s2885, s4880. 3. Add some optimize_link calling in set_smp. Regards YH

1 0

答复: S4882 Support Done
by YhLu 25 Mar '04

25 Mar '04

Stefan thanks. 1. hard_reset, with my two patch, the s4880 and 2885 with deferent link to amd8131 and more links to in coherent devices can make ht-reset works. You can keep the hard-reset, but some time it cause trouble. 2. sio-enable, because the init is not called. Without the init_keyboard, the keyboard will not work under kernel 2.6.3 or later. Regards YH -----邮件原件----- 发件人: Stefan Reinauer [mailto:stepan@suse.de] 发送时间: 2004年3月25日 1:51 收件人: YhLu 抄送: ron minnich; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: Re: S4882 Support Done * YhLu <YhLu(a)tyan.com> [040324 22:19]: > Please commit the s4882 support code. > > 1. Add S4882 support. > 2. Modify auto.c for s2881, s2885, s4880. > 3. Add some optimize_link calling in set_smp. it's committed, except two small things: * src/devices/hypertransport.c: - hard_reset(); +// by LYH hard_reset(); it'd be better to fix this issue so we don't walk into that code path anymore at all. * src/superio/winbond/w83627hf/superio.c Why did this not have a sio_enable before? Is it really needed? Stefan -- Stefan Reinauer, SUSE LINUX AG Head of Architecture Development

3 3

(no subject)
by YhLu 25 Mar '04

25 Mar '04

I add one function incoherent.c static int ht_setup_chains(const struct ht_chain *ht_c, int ht_c_num); and it can only be called by multi-ht-chains init to handle multiple chains YH -----邮件原件----- 发件人: Stefan Reinauer [mailto:stepan@suse.de] 发送时间: 2004年3月25日 1:56 收件人: YhLu 抄送: ron minnich; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: Re: ????: S4882 Support Done * YhLu <YhLu(a)tyan.com> [040325 08:03]: > Please commit the s2885 support. > > It make ht_reset in auto.c works with s2885. Eric, can you review this patch? It definitely won't break anything, but I want to make sure it fits into src/northbridge/amd/amdk8/incoherent_ht.c before committing this. Stefan -- Stefan Reinauer, SUSE LINUX AG Head of Architecture Development

1 0

Via EPIA-M serial output- problem fixed
by Shawn Perkin 25 Mar '04

25 Mar '04

Hello All, I figured out why I had no output on the serial port of my Via EPIA-M. I am embarrassed to admit this, but I was not using a null modem cable between both PC's. I want to thank the folks that offered help; I and may have a few more questions down the line. Once I get this project finished, I'm planning to put together a Web site with FAQ and how-to documents for the Via EPIA-M motherboard. If anyone would like to contribute information, tips, pitfalls, etc... please email me at: shawn(a)interspeed.net or shawnp(a)russound.com. Best regards, Shawn

2 1

thinning out mainboard directories
by Stefan Reinauer 25 Mar '04

25 Mar '04

Hi, I'd like to continue thinning out the mainboard specific code for the K8 mainboards, so it will be easier to keep all the mainboards on the same level if the infrastructure code around it changes. All code that is used by two or more motherboards should go to the northbridge or southbridge code (or elsewhere) * failover.c this seems to be the same on all K8 boards. It contains code that is specific to the amd 8111 south bridge. I suggest splitting this in two pieces, one going to the cpu/k8 code, the other one going to the southbridge directory. Maybe this could even be used by x86 based non-K8 boards? * chip.h What exactly is this good for? It seems to be unused by all K8 boards. Do we need it? Should it be merged with mainboard.c? mainboard.c and auto.c will probably always stay. (Can we rename this to more speaking names, too? At least init.c or sth like that sounds a lot more descriptive) irq_tables.c and mptable.c will hopefully become autogenerated from config some time, too. This could reduce the amount of mainboard specific code to not more than four files, giving any hardware vendor a fair chance to jump on the boat... Stefan -- Stefan Reinauer, SUSE LINUX AG Head of Architecture Development

2 1

S4882 Support Done
by YhLu 25 Mar '04

25 Mar '04

Ron, Please commit the s4882 support code. 1. Add S4882 support. 2. Modify auto.c for s2881, s2885, s4880. 3. Add some optimize_link calling in set_smp. Regards YH

3 2

答复: S4882 Support Done
by YhLu 25 Mar '04

25 Mar '04

Ron, Please commit the s2885 support. It make ht_reset in auto.c works with s2885. Regards YH -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 13:19 收件人: ron minnich 抄送: Stefan Reinauer; ebiederman(a)lnxi.com; linuxbios(a)clustermatic.org 主题: S4882 Support Done Ron, Please commit the s4882 support code. 1. Add S4882 support. 2. Modify auto.c for s2881, s2885, s4880. 3. Add some optimize_link calling in set_smp. Regards YH

3 2

No output on EPIA-M serial port
by Shawn Perkin 25 Mar '04

25 Mar '04

Hello all, I'm currently in the process of trying to get Linuxbios to work on my Via EPIA-M with no success. I have successfully complied Etherboot 5.2.0 as my payload, and performed a successful build of Linuxbios. I burned the image without any errors and rebooted the system. I then had absolutely no output on either serial port, or local display. I currently have 256 MB of ram in the unit, and have tried a build with and without the extracted vgabios.bin. I have included my config file for your review. Any help would be greatly appreciated. Shawn # # LinuxBIOS config file for: VIA epia-m mini-itx # target /usr/local/build/epia-m # via epia mainboard via/epia-m # Enable Serial Console for debugging option SERIAL_CONSOLE=1 #option SERIAL_POST=1 option TTYS0_BAUD=115200 #option TTYS0_BAUD=57600 option HAVE_FRAMEBUFFER=1 option CONFIG_VGABIOS=1 option CONFIG_REALMODE_IDT=1 dir src/bioscall option CONFIG_PCIBIOS=1 option VGABIOS_START=0xfffe0000 #addaction romimage dd if=../vgabios.bin of=romimage bs=65536 seek=2 conv=sync conv=notrunc option CONFIG_EPIAMVERSIONSTRING="5.0.0E-" __DATE__ " " __TIME__ #target /ram/freebios/obj #payload /code/bootfiles/etherboot/via6105m.ebi option DEFAULT_CONSOLE_LOGLEVEL=9 option DEBUG=1 # Use 256KB Standard Flash as Normal BIOS option RAMTEST=1 option USE_GENERIC_ROM=1 option STD_FLASH=1 #option ZKERNEL_START=0xfffc0000 option ROM_SIZE=262144 # payload size = 192KB option PAYLOAD_SIZE=196608 # use ELF Loader to load Etherboot option USE_ELF_BOOT=1 # Use Etherboot as our payload payload /home/shawnp/bios/etherboot-5.2.0/src/bin/via-rhine.elf # payload /opt/cwlinux/memtest86/memtest

4 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot