coreboot

coreboot@coreboot.org

39717 discussions

Re: [LinuxBIOS] The full "How to"
by Lu, Yinghai 11 Jan '06

11 Jan '06

The sc520 one. -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Ronald G Minnich Sent: Wednesday, January 11, 2006 12:41 PM To: Adam Talbot Cc: linuxbios(a)openbios.org Subject: Re: [LinuxBIOS] The full "How to" you could try the linux journal articles for a start. Did you see them? ron -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

1 0

[LinuxBIOS] Anybody having success with EPIA 800? (was Re: EPIA halting after vt8601 init?)
by Hacen Aissaoui 11 Jan '06

11 Jan '06

Hello, Sorry to come back on this old thread but I would greatly appreciate if anyone could update the info discussed in it. Is the SDRAM CAS latency parameter the only issue with EPIA 800 ? Does the newest version of LB adapt itself to different SDRAMs ? Finally, Al, you were talking about : "keeping track of what it takes to get this going on EPIA, so I can post it for others in the future, this will be good to know." Could you kindly share your tracks with the EPIA 800 ? Thanks Hacen ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger. Appelez le monde entier à partir de 0,012 /minute ! Téléchargez sur http://fr.messenger.yahoo.com

3 3

Re: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp
by Lu, Yinghai 09 Jan '06

09 Jan '06

Commited. -----Original Message----- From: Richard Smith [mailto:smithbone@gmail.com] Sent: Monday, January 09, 2006 11:05 AM To: Lu, Yinghai Cc: LinuxBIOS Subject: Re: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp On 1/9/06, Lu, Yinghai <yinghai.lu(a)amd.com> wrote: > I want to use wrapper one... > > #if CONFIG_SMP==1 > copy..... > #endif Ok. Thats the current fix I have. -- Richard A. Smith

1 0

[LinuxBIOS] Fwd: [issue55] move mptable to 960k to 1M
by yhlu 09 Jan '06

09 Jan '06

---------- Forwarded message ---------- From: Yinghai Lu <lxbios(a)openbios.org> Date: Jan 9, 2006 1:04 PM Subject: [issue55] move mptable to 960k to 1M To: ollie(a)lanl.gov, rminnich(a)lanl.gov, stepan(a)openbios.org, yinghailu(a)gmail.com Yinghai Lu <yinghailu(a)gmail.com> added the comment: 1. check if mptable cross 0x467 2a. the mpc small than 64k, will move that to 960K-1M 2b. if mpc big than 64k, will move that from 0x500 3. mpf will put on low table, so the kernel can find it. Please use this one instead of 010706_mv_mptable_high.diff ---------- status: unread -> chatting ________________________________________________ LinuxBIOS issue tracker <lxbios(a)openbios.org> <https://openbios.org/roundup/linuxbios/issue55> ________________________________________________

1 0

[LinuxBIOS] CAR and PIII celeron?
by Richard Smith 09 Jan '06

09 Jan '06

What do I need to do to see if CAR will work on the PIII celeron? -- Richard A. Smith

3 3

Re: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp
by Lu, Yinghai 09 Jan '06

09 Jan '06

I want to use wrapper one... #if CONFIG_SMP==1 copy..... #endif YH -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Richard Smith Sent: Monday, January 09, 2006 8:24 AM To: LinuxBIOS Subject: Re: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp > > Yh Lu, this is your patch that broke things, I assume you will fix? > I don't mind fixing it. (I already have for my tree) I just don't know which fix is prefered. Either add a wrapper around the call or pull the definition out and make it compile to a empty function like it does when _RAMBASE is set to a large value. -- Richard A. Smith -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

2 1

Re: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp
by Lu, Yinghai 09 Jan '06

09 Jan '06

I agree. YH -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Richard Smith Sent: Sunday, January 08, 2006 10:45 PM To: LinuxBIOS Subject: [LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp While merging in my 440bx patchs to the latest revision I got unresolved references to the copy_secondary_start_to_1m_below() function. if CONFIG_SMP != 1 then this function never gets defined but initialize_cpus() calls it regardless. Will copy_secondary_start_to_1m_below() ever be used in the non-smp case? If so then it needs a CONFIG_SMP wrapper or needs to get defined as empty in the #else case of CONFIG_SMP. -- Richard A. Smith -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

1 0

[LinuxBIOS] copy_secondary_start_to_1m_below() and non-smp
by Richard Smith 09 Jan '06

09 Jan '06

While merging in my 440bx patchs to the latest revision I got unresolved references to the copy_secondary_start_to_1m_below() function. if CONFIG_SMP != 1 then this function never gets defined but initialize_cpus() calls it regardless. Will copy_secondary_start_to_1m_below() ever be used in the non-smp case? If so then it needs a CONFIG_SMP wrapper or needs to get defined as empty in the #else case of CONFIG_SMP. -- Richard A. Smith

3 4

[LinuxBIOS] any chance to get X fbdev driver to work ?
by Christian Sühs 09 Jan '06

09 Jan '06

Hey, and Happy X-Mas for all For non working Bootsplash with vesafb and LinuxBios I use the Viafb from Epia2 patch Kernel 2.4.25. Now Bootsplash works, with a little trick in the bootsplash sources :D But I'm not able to bring up a XServer with fbdev as driver. The system hangs without any errors. It seems the problem is the viafb inside the Kernel. Unfortunatly, I have the same problem with orginal Bios. Furthermore, the X via driver does not work with the LinuxBios system. I get an VGA_Bios checksum failure. With original Bios it works. I have had a look on the X Via driver sources. The file called via_bios.c (search for checksum) It seems the routine looks on 0xc0000 for a valid vga_bios, all other checks before are verified as true. Only the last check fails. I have tried to start X without Bios Callbacks, but fail. Is there any solution. It should be a valid bios on 0xc0000, the checksum routine is a loop about 65536 bytes. the result must be zero. As I create the vga bios, I have fill up the rest with OO to 65536. Is that the problem? Should I fill up with FF? chris

5 26

[LinuxBIOS] Fwd: [issue55] move mptable to 960k to 1M
by yhlu 08 Jan '06

08 Jan '06

Please check the patch. It will move the mptable to 960k-1M YH ---------- Forwarded message ---------- From: Yinghai Lu <lxbios(a)openbios.org> Date: Jan 7, 2006 9:35 PM Subject: [issue55] move mptable to 960k to 1M To: yinghailu(a)gmail.com New submission from Yinghai Lu <yinghailu(a)gmail.com>: move mptable to high ---------- files: 010706_mv_mptable_high.diff messages: 311 nosy: yhlu priority: critical status: unread title: move mptable to 960k to 1M ________________________________________________ LinuxBIOS issue tracker <lxbios(a)openbios.org> <https://openbios.org/roundup/linuxbios/issue55> ________________________________________________

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot