See patch.
I also cleaned up the Debug Port page in the wiki a bit.
http://www.coreboot.org/EHCI_Debug_Port
For now I marked all chipsets where we have Debug Port code as untested,
I have a feeling the functionality was rarely tested recently (or at
all) so we should only mark those chipsets as tested where we actually
have recent test reports.
I'm not sure about the SiS966 Debug Port code, it looks copy-pasted from
MCP55 to me, not sure if the functionality actually exists on that
chipset and if the code is correct for that. Maybe someone with a SiS966
board could test this?
I'll be able to test on two more chipsets (MCP55, ICH7) and mark them
as tested in the wiki then, will report back. Can somebody test SB700?
I guess it works fine as the SB600 does too, but a test report would be
nice.
Uwe.
--
http://hermann-uwe.de | http://sigrok.orghttp://randomprojects.org | http://unmaintained-free-software.org
Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "stepan" checked in revision 5885 to
the coreboot repository. This caused the following
changes:
Change Log:
fix Kontron KT690 and clean up socket S1G1 boards accordingly.
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Acked-by: Stefan Reinauer <stepan(a)coresystems.de>
Build Log:
Compilation of kontron:kt690 has been fixed
If something broke during this checkin please be a pain
in stepan's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
coreboot automatic build system
Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "stepan" checked in revision 5884 to
the coreboot repository. This caused the following
changes:
Change Log:
drop unneeded earlymtrr.c include
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Acked-by: Stefan Reinauer <stepan(a)coresystems.de>
Build Log:
Compilation of kontron:kt690 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=5884&device=kt690&vendor=k…
If something broke during this checkin please be a pain
in stepan's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
coreboot automatic build system
Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "wt" checked in revision 5883 to
the coreboot repository. This caused the following
changes:
Change Log:
Move CAR settings to board config for socket 940 boards.
For the a number of the socket 940 based machines, I collapsed their CAR
configurations into the socket config.
However, I have kept a number of overrides in place for the following
machines:
* broadcom/blast
* ibm/e32{5,6}
* newisys/khepri
* sunw/ultra40
* tyan/s488{0,2}
These machines used different setting than the defaults for socket 940
systems.
Signed-off-by: Warren Turkal <wt(a)penguintechs.org>
Acked-by: Peter Stuge <peter(a)stuge.se>
Build Log:
Compilation of kontron:kt690 has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=5883&device=kt690&vendor=k…
If something broke during this checkin please be a pain
in wt's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
coreboot automatic build system