coreboot February 2010

coreboot@coreboot.org

61 participants
310 discussions

Motherboard HannStar - acer aspire 5720
by Giuseppe Notaro 03 Feb '10

03 Feb '10

Hi, Will coreboot work on a mobo HannStar J MV-4 94V-O ? It's about a laptop Acer aspire 5720 with Intel Core 2 Duo processor T5250 (1.5 GHz, 667 MHz FSB, 2 MB L2 cache). Below the output of 'lspci -tvnn' : -[0000:00]-+-00.0 Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] +-02.0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] +-02.1 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] +-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] +-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] +-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] +-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] +-1c.0-[0000:02]-- +-1c.1-[0000:04]-- +-1c.2-[0000:05]----00.0 Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] +-1c.3-[0000:06]----00.0 Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] +-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] +-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] +-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] +-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] +-1e.0-[0000:07]--+-00.0 Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] | +-00.1 Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] | +-00.2 Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] | +-00.3 Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] | \-00.4 Ricoh Co Ltd xD-Picture Card Controller [1180:0852] +-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] ================================================================================================================ Below the output of 'superiotool -dV' : superiotool r3125 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff No Super I/O found ================================================================================================================ Below the output of 'flashrom -V' : Calibrating delay loop... 426M loops per second. OK. No coreboot table found. Found chipset "Intel ICH8M", enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS address = 0xfed1f410 GCS = 0xc10c60: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 SPI Read Configuration: prefetching disabled, caching enabled, BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x12, id2 0x37 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x12, id2 0x37 Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Atmel AT25DF321, 4096 KB: Programming OPCODES... done RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for AMIC Technology A25L40P, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for AMIC Technology A49LF040A, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for AMIC Technology A29040B, 512 KB: probe_29f040b: id1 0x12, id2 0x37 Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x12, id2 0xad Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x12, id2 0x37 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x2, id2 0xe Probing for Macronix MX25L4005, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Macronix MX25L8005, 1024 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Macronix MX25L1605, 2048 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Macronix MX25L3205, 4096 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0x0, id2 0x0 Probing for PMC Pm25LV010, 128 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm25LV016B, 2048 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm25LV020, 256 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm25LV040, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm25LV080B, 1024 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm25LV512, 64 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x2, id2 0xe Probing for Spansion S25FL016A, 2048 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for SST SST25VF016B, 2048 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for SST SST25VF040B, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x12, id2 0x37 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x3a, id2 0x2f, id1 parity violation Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x12, id2 0x37 Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0x2, id2 0xe Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x2, id2 0xe Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0x2, id2 0xe Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P10-A, 128 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P20, 256 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P40, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P40-old, 512 KB: RDID returned ff ff ff. RES returned ff. probe_spi_res: id 0xff Probing for ST M25P80, 1024 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P16, 2048 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P32, 4096 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P64, 8192 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M25P128, 16384 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x12, id2 0x37 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x12, id2 0xad Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x12, id2 0x37 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x12, id2 0x37 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x2, id2 0xe Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x2, id2 0xe Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x12, id2 0x37 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x2, id2 0xe Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Winbond W25x10, 128 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Winbond W25x20, 256 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Winbond W25x40, 512 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Winbond W25x80, 1024 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xea, id2 0xd0 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x12, id2 0x37, id1 parity violation Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x2, id2 0xe Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x0, id2 0x0, id1 parity violation Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0x2, did 0xe Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x12, did 0x37 Probing for EON unknown EON SPI chip, 0 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for Macronix unknown Macronix SPI chip, 0 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for PMC unknown PMC SPI chip, 0 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for SST unknown SST SPI chip, 0 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff Probing for ST unknown ST SPI chip, 0 KB: RDID returned ff ff ff. RDID byte 0 parity violation. probe_spi_rdid: id1 0xff, id2 0xffff No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. ==================================================================================================== Thank you for your work. Giuseppe

1 0

[commit] r5075 - in trunk: src/mainboard/supermicro src/mainboard/supermicro/h8qme_fam10 targets/supermicro/h8qme_fam10
by repository service 03 Feb '10

03 Feb '10

Author: oxygene Date: Wed Feb 3 17:04:40 2010 New Revision: 5075 URL: http://tracker.coreboot.org/trac/coreboot/changeset/5075 Log: This patch adds the Supermicro H8QME-2+ (fam10) Motherboard with the following remaining issues: - ACPI not working - SMBus gets irq 0 instead of 5 - Loading VGA rom fails (using seabios to do it) (copied a newer Makefile.inc from h8dmr_fam10 vs. the patch on the list) Signed-off-by: Knut Kujat <knuku(a)gap.upv.es> Acked-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Added: trunk/src/mainboard/supermicro/h8qme_fam10/ trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c trunk/src/mainboard/supermicro/h8qme_fam10/chip.h trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h trunk/targets/supermicro/h8qme_fam10/ trunk/targets/supermicro/h8qme_fam10/Config.lb trunk/targets/supermicro/h8qme_fam10/VERSION Modified: trunk/src/mainboard/supermicro/Kconfig Modified: trunk/src/mainboard/supermicro/Kconfig ============================================================================== --- trunk/src/mainboard/supermicro/Kconfig Wed Feb 3 14:49:24 2010 (r5074) +++ trunk/src/mainboard/supermicro/Kconfig Wed Feb 3 17:04:40 2010 (r5075) @@ -5,6 +5,7 @@ source "src/mainboard/supermicro/h8dme/Kconfig" source "src/mainboard/supermicro/h8dmr/Kconfig" source "src/mainboard/supermicro/h8dmr_fam10/Kconfig" +source "src/mainboard/supermicro/h8qme_fam10/Kconfig" source "src/mainboard/supermicro/x6dai_g/Kconfig" source "src/mainboard/supermicro/x6dhe_g/Kconfig" source "src/mainboard/supermicro/x6dhe_g2/Kconfig" Added: trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,349 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## CONFIG_XIP_ROM_SIZE must be a power of 2. +# for testing with -O != s. FIXME +#default CONFIG_XIP_ROM_SIZE = 128 * 1024 +default CONFIG_XIP_ROM_SIZE = 128 * 1024 +include /config/failovercalculation.lb + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end + + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + end + else + makerule ./auto.inc + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + action "perl -e 's/\.rodata/.rom.data/g' -pi $@" + action "perl -e 's/\.text/.section .rom.text/g' -pi $@" + end + end + +if CONFIG_USE_FAILOVER_IMAGE +else + if CONFIG_AP_CODE_IN_CAR + makerule ./apc_auto.o + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" + end + end +end + + +## +## Build our 16 bit and 32 bit coreboot entry code +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc + + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end + +## +## Build our reset vector (This is where coreboot is entered) +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +## +## ROMSTRAP table for MCP55 +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +end + + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc + +### +### This is the early phase of coreboot startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + ldscript /arch/i386/lib/failover_failover.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + end +end + +## +## Setup RAM +## + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +## +## Include the secondary Configuration files +## +config chip.h + +dir /southbridge/nvidia/mcp55 +dir /southbridge/amd/amd8132 + +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # SB on link 2.0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic #dimm 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic #dimm 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic #dimm 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic #dimm 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic #dimm 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic #dimm 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic #dimm 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic #dimm 1-1-1 + # device i2c 57 on end + # end + # chip drivers/generic/generic #dimm 2-0-0 + # device i2c 58 on end + # end + # chip drivers/generic/generic #dimm 2-0-1 + # device i2c 59 on end + # end + # chip drivers/generic/generic #dimm 2-1-0 + # device i2c 5a on end + # end + # chip drivers/generic/generic #dimm 2-1-1 + # device i2c 5b on end + # end + # chip drivers/generic/generic #dimm 3-0-0 + # device i2c 5c on end + # end + # chip drivers/generic/generic #dimm 3-0-1 + # device i2c 5d on end + # end + # chip drivers/generic/generic #dimm 3-1-0 + # device i2c 5e on end + # end + # chip drivers/generic/generic #dimm 3-1-1 + # device i2c 5f on end + # end + + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will diepend on addon pci device, do we need to scan_smbus_bus? +# + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 off end # AZA + device pci 7.0 on + device pci 1.0 on end + end + device pci 8.0 off end + device pci 9.0 off end + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on + chip southbridge/amd/amd8132 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 3.0 on end + device pci 3.1 on end + end + device pci 1.1 on end + + end #amd8132 + + end #device pci 19.0 + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex Added: trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,143 @@ +config BOARD_SUPERMICRO_H8QME_FAM10 + bool "H8QME-2+ (Fam10)" + select ARCH_X86 + select CPU_AMD_SOCKET_F_1207 + select NORTHBRIDGE_AMD_AMDFAM10 + select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select USE_PRINTK_IN_CAR + select USE_DCACHE_RAM + select HAVE_HARD_RESET + select LIFT_BSP_APIC_ID + select AMDMCT + select BOARD_ROMSIZE_KB_1024 + select TINY_BOOTBLOCK + select ENABLE_APIC_EXT_ID + +config MAINBOARD_DIR + string + default supermicro/h8qme_fam10 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_GLOBAL_VAR_SIZE + hex + default 0x04000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config RAMBASE + hex + default 0x200000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config RAMTOP + hex + default 0x1000000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HEAP_SIZE + hex + default 0xc0000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config APIC_ID_OFFSET + hex + default 0x0 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MEM_TRAIN_SEQ + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_UNITID_OFFSET_ONLY + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config LB_CKS_LOC + int + default 123 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAINBOARD_PART_NUMBER + string + default "H8QME-2+ (Fam10)" + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAX_CPUS + int + default 16 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAX_PHYSICAL_CPUS + int + default 4 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config USE_INIT + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config IRQ_SLOT_COUNT + int + default 11 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_0100009f.h" + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SERIAL_CPU_INIT + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x1511 + depends on BOARD_SUPERMICRO_H8QME_FAM10 Added: trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,71 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +driver-y += mainboard.o + +# Needed by irq_tables and mptable and acpi_tables. +obj-y += get_bus_conf.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o + +# This is part of the conversion to init-obj and away from included code. + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0s := $(src)/cpu/x86/32bit/entry32.inc +crt0s += $(src)/cpu/amd/car/cache_as_ram.inc +crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc + +ldscripts := $(src)/arch/i386/init/ldscript_fallback_cbfs.lb +ldscripts += $(src)/cpu/x86/32bit/entry32.lds +ldscripts += $(src)/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl + iasl -p $(obj)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' $(obj)/pci2.hex + mv $(obj)/pci2.hex $(obj)/ssdt2.c + +$(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl" + iasl -p $(obj)/pci3 -tc $(CONFIG_MAINBOARD)/ + perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' $(obj)/pci3.hex + mv $(obj)/pci3.hex $(obj)/ssdt3.c + +$(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl" + iasl -p $(obj)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' $(obj)/pci4.hex + mv $(obj)/pci4.hex $(obj)/ssdt4.c + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif + Added: trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,368 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_CROSS_COMPILE +uses CC +uses HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_VGA +uses CONFIG_CONSOLE_VGA +uses CONFIG_VGA_ROM_RUN +uses CONFIG_PCI_ROM_RUN +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC + +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses CONFIG_SERIAL_CPU_INIT + +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses CONFIG_RAMTOP + +uses CONFIG_UNCOMPRESSED + +uses CONFIG_PCI_BUS_SEGN_BITS + +uses CONFIG_AP_CODE_IN_CAR + +uses CONFIG_MEM_TRAIN_SEQ + +uses CONFIG_WAIT_BEFORE_CPUS_INIT + +uses CONFIG_AMDMCT + +uses CONFIG_USE_PRINTK_IN_CAR +uses CONFIG_AMD_UCODE_PATCH_FILE +uses CONFIG_ID_SECTION_OFFSET + +uses CONFIG_PIRQ_ROUTE + +default CONFIG_PIRQ_ROUTE = 1 + + +### +### Build options +### + +## +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +## +default CONFIG_ROM_SIZE=1024*1024 + +## +## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use +default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE +default CONFIG_FAILOVER_SIZE=0x02000 + +#more 1M for pgtbl +default CONFIG_RAMTOP=16384*1024 +#default CONFIG_RAMTOP=16384*8192 +## +## Build code for the fallback boot +## +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 + +## +## Build code to reset the motherboard from coreboot +## +default CONFIG_HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default CONFIG_GENERATE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +##default CONFIG_GENERATE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 + +## ACPI tables will be included +default CONFIG_GENERATE_ACPI_TABLES=0 + +## +## Build code to export a CMOS option table +## +default CONFIG_HAVE_OPTION_TABLE=1 + +## +## Move the default coreboot cmos range off of AMD RTC registers +## +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_PHYSICAL_CPUS=4 +default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS +default CONFIG_LOGICAL_CPUS=1 + +default CONFIG_SERIAL_CPU_INIT=1 + +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x00 +default CONFIG_LIFT_BSP_APIC_ID=1 + +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 +#1G +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#VGA Console +default CONFIG_VGA=0 +default CONFIG_CONSOLE_VGA=1 +default CONFIG_VGA_ROM_RUN=1 +default CONFIG_PCI_ROM_RUN=0 + +#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device +default CONFIG_HT_CHAIN_UNITID_BASE=1 + +#real SB Unit ID, default is 0x20, mean dont touch it at last +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 + +#make the SB HT chain on bus 0, default is not (0) +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 + +#only offset for SB chain?, default is yes(1) +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## enable CACHE_AS_RAM specifics +## +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xc4000 +default CONFIG_DCACHE_RAM_SIZE=0x0c000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 +default CONFIG_USE_INIT=0 + +default CONFIG_MEM_TRAIN_SEQ=2 +default CONFIG_WAIT_BEFORE_CPUS_INIT=0 +default CONFIG_AMDMCT = 1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default CONFIG_MAINBOARD_PART_NUMBER="h8qme (Fam10)" +default CONFIG_MAINBOARD_VENDOR="Supermicro" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 + +## +## Set microcode patch file name +## +## Barcelona rev Ax: "mc_patch_01000020.h" +## Barcelona rev B0, B1, BA: "mc_patch_01000084.h" +## Barcelona rev B2, B3: "mc_patch_01000083.h" +## Shanghai rev RB-C2: "mc_patch_01000086.h" +## Shanghai rev DA-C2: "mc_patch_0100009f.h" +## +#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h" +default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h" + +### +### coreboot layout values +### + +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 0x1e000 + + +default CONFIG_STACK_SIZE=0x10000 +default CONFIG_HEAP_SIZE= 0xc000 + + +## +## Only use the option table in a normal image +## +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) + +## +## Coreboot C code runs at this location in RAM +## +default CONFIG_RAMBASE=0x00200000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD = 1 + +#default CONFIG_COMPRESSED_PAYLOAD = 1 + +# CBFS will take care of payload compression +default CONFIG_UNCOMPRESSED = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## +default CONFIG_USE_PRINTK_IN_CAR=1 + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +#default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 + +# Select the serial console base port +default CONFIG_TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default CONFIG_TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5 +## At a maximum only compile in this level of debugging +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5 + +## +## Select power on after power fail setting +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +default CONFIG_USE_FAILOVER_IMAGE=0 +default CONFIG_USE_FALLBACK_IMAGE=0 +default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE + +default CONFIG_ID_SECTION_OFFSET=0x80 +### End Options.lb +end Added: trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif + +#include "arch/i386/lib/console.c" +#include "lib/uart8250.c" +#include "console/vtxprintf.c" +#include "./arch/i386/lib/printk_init.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include <cpu/amd/model_fxx_rev.h> + +//#include "northbridge/amd/amdk8/raminit.h" +#include "northbridge/amd/amkfam10/raminit.h" + +#include "cpu/amd/model_fxx/apic_timer.c" + +#include "lib/delay.c" + +//#include "cpu/x86/lapic/boot_cpu.c" + +//#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdfam10/reset_test.c" + +//#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdfam10/debug.c" + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +//#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdfam10/amdfam10.h" + +#include "cpu/x86/mtrr.h" +#include "cpu/amd/mtrr.h" +#include "cpu/x86/tsc.h" + +//#include "northbridge/amd/amdk8/amdk8_f_pci.c" +#include "northbridge/amd/amdfam10/amdfam10_pci.c" + +#include "northbridge/amd/amdk8/raminit_f_dqs.c" +//#include "northbridge/amd/amdfam10/raminit_f_dqs.c" + +static inline unsigned get_nodes(void) +{ + return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; +} + +//#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/quadcore/quadcore.c" + +void hardwaremain(int ret_addr) +{ + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_RAMTOP) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + + struct node_core_id id; + + id = get_node_core_id_x(); + + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + + train_ram(id.nodeid, sysinfo, sysinfox); + + /* + go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp + */ + + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); + + + +} +struct eregs { + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +void x86_exception(struct eregs *info) +{ + do { + hlt(); + } while(1); +} + + Added: trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,380 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#define QRANK_DIMM_SUPPORT 1 + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + +#define FAM10_SET_FIDVID 1 +#define FAM10_SET_FIDVID_CORE_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" + +static void post_code(u8 value) { + outb(value, 0x80); +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "lib/ramtest.c" + +#include <cpu/amd/model_10xxx_rev.h> + +//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" + +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdfam10/reset_test.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" +#include "superio/winbond/w83627hf/w83627hf_early_init.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdfam10/debug.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" + + +#include "northbridge/amd/amdfam10/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdht/ht_wrapper.c" + +#include "include/cpu/x86/mem.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/raminit_amdmct.c" +#include "northbridge/amd/amdfam10/amdfam10_pci.c" + +#include "resourcemap.c" + +#include "cpu/amd/quadcore/quadcore.c" + +#define MCP55_NUM 1 +#define MCP55_USE_NIC 1 +#define MCP55_USE_AZA 1 + +#define MCP55_PCI_E_X_0 4 + +#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" +#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" + +#include "cpu/amd/car/copy_and_run.c" + +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_10xxx/init_cpus.c" + +#include "cpu/amd/model_10xxx/fidvid.c" + +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" +#include "northbridge/amd/amdfam10/early_ht.c" + + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + enable_smbus(); +// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "spd_addr.h" +#include "cpu/amd/microcode/microcode.c" +#include "cpu/amd/model_10xxx/update_microcode.c" + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + u32 bsp_apicid = 0; + u32 val; + u32 wants_reset; + msr_t msr; + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + post_code(0x32); + + pnp_enter_ext_func_mode(SERIAL_DEV); + pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6)); + w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); + pnp_exit_ext_func_mode(SERIAL_DEV); + + uart_init(); + console_init(); + printk_debug("\n"); + + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + val = cpuid_eax(1); + printk_debug("BSP Family_Model: %08x \n", val); + printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk_debug("bsp_apicid = %02x \n", bsp_apicid); + printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + /* Core0 on each node is configured. Now setup any additional cores. */ + printk_debug("start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if FAM10_SET_FIDVID == 1 + msr = rdmsr(0xc0010071); + printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); +#endif + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + + post_code(0x3B); + +/* It's the time to set ctrl in sysinfo now; */ +printk_debug("fill_mem_ctrl()\n"); +fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + +post_code(0x3D); + +//printk_debug("enable_smbus()\n"); +// enable_smbus(); /* enable in sio_setup */ + +post_code(0x3E); + + memreset_setup(); + +post_code(0x40); + + + printk_debug("raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +// printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x42); // Should never see this post code. + +} + + +#endif Added: trunk/src/mainboard/supermicro/h8qme_fam10/chip.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/chip.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +}; Added: trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,119 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 quad_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory1 + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + Added: trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,165 @@ +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # SB on link 2.0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on #nec pci-x + end + device pci 0.1 on #nec pci-x + device pci 4.0 on end #scsi + device pci 4.1 on end #scsi + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex Added: trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/quadcore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +unsigned sbdn3; + + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i, j; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + m->bus_type[0] = 1; //pci + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + + m->bus_8132_0 = (sysconf.pci1234[1] >> 12) & 0xff; + sbdn3 =(sysconf.hcdn[1] & 0xff); // first byte of second chain + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + +/*8132_1*/ + + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3,0)); + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8132_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_8132_2++; +/*8132_2*/ + + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3+1,0)); + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + + for(i=0; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff; + for (j = busn; j <= busn_max; j++) + m->bus_type[j] = 1; + if(m->bus_isa <= busn_max) + m->bus_isa = busn_max + 1; + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_mcp55 = apicid_base+0; + m->apicid_8132_1 = apicid_base+1; + m->apicid_8132_2 = apicid_base+2; +} Added: trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern void get_bus_conf(void); + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0364; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +} Added: trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("Supermicro H8QME Mainboard (Family 10)") +}; Added: trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; + unsigned bus_type[256]; + +unsigned char bus_8132_0; //7 +unsigned char bus_8132_1; //8 +unsigned char bus_8132_2; //9 +unsigned apicid_8132_1; +unsigned apicid_8132_2; + +}; + +#endif + Added: trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern void get_bus_conf(void); +extern unsigned sbdn3; + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "SUPERMIC"; + static const char productid[12] = "H8QME "; + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + + + int i,j; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(j= 0; j < 256 ; j++) { + if(m->bus_type[j]) + smp_write_bus(mc, j, "PCI "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); + + + + + + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + +//void smp_write_ioapic(struct mp_config_table *mc, unsigned char id, unsigned char ver, unsigned long apicaddr); + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + + + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x00000ab5; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x5ab0a500; + pci_write_config32(dev, 0x80, dword); + + dword = 0xa000000b; + dword = 0x10000002; + pci_write_config32(dev, 0x84, dword); + + } + + /* 8132_1*/ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3,1)); + res = find_resource(dev,PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base); + + /* 8132_2*/ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3+1,1)); + res = find_resource(dev,PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base); + + +} + + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID * PIN# */ +smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); + +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0x5); /* 5 SMBus! Not correctly assign!!*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0xb); /* 11 USB, OK */ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0xa); /* 10 USB, OK */ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x5); /* 5 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0xa); /* 10 VGA, OK*/ + +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|0, m->apicid_mcp55, 0x5); /* 5 eth0, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|1, m->apicid_mcp55, 0xb); /* 11 eth1, OK*/ + + +for(j=7;j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} Added: trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} + Added: trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * This file defines the SPD addresses for the mainboard. Must be included in + * cache_as_ram_auto.c + */ + +#define RC00 0 +#define RC01 1 +#define RC02 2 +#define RC03 3 +#define RC04 4 +#define RC05 5 +#define RC06 6 +#define RC07 7 +#define RC08 8 +#define RC09 9 +#define RC10 10 +#define RC11 11 +#define RC12 12 +#define RC13 13 +#define RC14 14 +#define RC15 15 +#define RC16 16 +#define RC17 17 +#define RC18 18 +#define RC19 19 +#define RC20 20 +#define RC21 21 +#define RC22 22 +#define RC23 23 +#define RC24 24 +#define RC25 25 +#define RC26 26 +#define RC27 27 +#define RC28 28 +#define RC29 29 +#define RC30 30 +#define RC31 31 + +#define RC32 32 +#define RC33 33 +#define RC34 34 +#define RC35 35 +#define RC36 36 +#define RC37 37 +#define RC38 38 +#define RC39 39 +#define RC40 40 +#define RC41 41 +#define RC42 42 +#define RC43 43 +#define RC44 44 +#define RC45 45 +#define RC46 46 +#define RC47 47 +#define RC48 48 +#define RC49 49 +#define RC50 50 +#define RC51 51 +#define RC52 52 +#define RC53 53 +#define RC54 54 +#define RC55 55 +#define RC56 56 +#define RC57 57 +#define RC58 58 +#define RC59 59 +#define RC60 60 +#define RC61 61 +#define RC62 62 +#define RC63 63 + + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + // third node + RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, + // forth node + RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, +#endif +}; + Added: trunk/targets/supermicro/h8qme_fam10/Config.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/targets/supermicro/h8qme_fam10/Config.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,46 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu(a)gmail.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target h8qme_fam10 +mainboard supermicro/h8qme_fam10 + +romimage "normal" + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" + payload ../seabios.elf +# payload /home/knut/Documents/final/filo.elf +# payload ../payload.elf +end + +romimage "fallback" + option CONFIG_USE_FALLBACK_IMAGE=1 + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" + payload ../seabios.elf +# payload /home/knut/Documents/final/filo.elf +# payload ../payload.elf +end + +romimage "failover" + option CONFIG_USE_FAILOVER_IMAGE=1 + option CONFIG_ROM_IMAGE_SIZE=CONFIG_FAILOVER_SIZE + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" +end + +buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback" "failover" Added: trunk/targets/supermicro/h8qme_fam10/VERSION ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/targets/supermicro/h8qme_fam10/VERSION Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1 @@ +_h8qme_fam10

1 0

KBuild Report [r5074]
by coresystems autobuild service 03 Feb '10

03 Feb '10

[1/117] a-trend/atc-6220 ok. Processing mainboard/a-trend/atc-6220 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [2/117] a-trend/atc-6240 ok. Processing mainboard/a-trend/atc-6240 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [3/117] abit/be6-ii_v2_0 ok. Processing mainboard/abit/be6-ii_v2_0 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [4/117] advantech/pcm-5820 ok. Processing mainboard/advantech/pcm-5820 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [5/117] amd/db800 ok. Processing mainboard/amd/db800 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [6/117] amd/dbm690t ok. Processing mainboard/amd/dbm690t (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/amd/dbm690t/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [7/117] amd/norwich ok. Processing mainboard/amd/norwich (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [8/117] amd/pistachio ok. Processing mainboard/amd/pistachio (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/amd/pistachio/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [9/117] amd/rumba ok. Processing mainboard/amd/rumba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [10/117] amd/serengeti_cheetah ok. Processing mainboard/amd/serengeti_cheetah (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/amd/serengeti_cheetah/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [11/117] amd/serengeti_cheetah_fam10 ok. Processing mainboard/amd/serengeti_cheetah_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/amd/serengeti_cheetah_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [12/117] arima/hdama ok. Processing mainboard/arima/hdama (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/arima/hdama/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [13/117] artecgroup/dbe61 ok. Processing mainboard/artecgroup/dbe61 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [14/117] asi/mb_5blgp ok. Processing mainboard/asi/mb_5blgp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [15/117] asi/mb_5blmp ok. Processing mainboard/asi/mb_5blmp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [16/117] asus/a8n_e ok. Processing mainboard/asus/a8n_e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/asus/a8n_e/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [17/117] asus/a8v-e_se ok. Processing mainboard/asus/a8v-e_se (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [18/117] asus/m2v-mx_se ok. Processing mainboard/asus/m2v-mx_se (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/asus/m2v-mx_se/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x1f00000 +CONFIG_RAMBASE = 0x100000 -CONFIG_RAMTOP = 0x2000000 +CONFIG_RAMTOP = 0x200000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [19/117] asus/mew-am ok. Processing mainboard/asus/mew-am (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [20/117] asus/mew-vm ok. Processing mainboard/asus/mew-vm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [21/117] asus/p2b-d ok. Processing mainboard/asus/p2b-d (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [22/117] asus/p2b-ds ok. Processing mainboard/asus/p2b-ds (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [23/117] asus/p2b-f ok. Processing mainboard/asus/p2b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [24/117] asus/p2b ok. Processing mainboard/asus/p2b (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [25/117] asus/p3b-f ok. Processing mainboard/asus/p3b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [26/117] axus/tc320 ok. Processing mainboard/axus/tc320 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [27/117] azza/pt-6ibd ok. Processing mainboard/azza/pt-6ibd (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [28/117] bcom/winnet100 ok. Processing mainboard/bcom/winnet100 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [29/117] bcom/winnetp680 ok. Processing mainboard/bcom/winnetp680 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/bcom/winnetp680/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 [30/117] biostar/m6tba ok. Processing mainboard/biostar/m6tba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [31/117] broadcom/blast ok. Processing mainboard/broadcom/blast (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x0 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [32/117] compaq/deskpro_en_sff_p600 ok. Processing mainboard/compaq/deskpro_en_sff_p600 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [33/117] dell/s1850 ok. Processing mainboard/dell/s1850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TTYS0_BAUD = 0x4b00 +CONFIG_TTYS0_BAUD = 0x1c200 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [34/117] digitallogic/adl855pc ok. Processing mainboard/digitallogic/adl855pc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SMP = 0x0 +CONFIG_SMP = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [35/117] digitallogic/msm586seg ok. Processing mainboard/digitallogic/msm586seg (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/digitallogic/msm586seg/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [36/117] digitallogic/msm800sev ok. Processing mainboard/digitallogic/msm800sev (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [37/117] eaglelion/5bcm ok. Processing mainboard/eaglelion/5bcm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [38/117] emulation/qemu-x86 ok. Processing mainboard/emulation/qemu-x86 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/emulation/qemu-x86/Config-abuild.lb ok Creating builddir...ok +CONFIG_CPU_EMULATION_QEMU_X86 = 0x1 -CONFIG_DCACHE_RAM_BASE = 0x8f000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [39/117] gigabyte/ga-6bxc ok. Processing mainboard/gigabyte/ga-6bxc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [40/117] gigabyte/ga_2761gxdk ok. Processing mainboard/gigabyte/ga_2761gxdk (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/gigabyte/ga_2761gxdk/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [41/117] gigabyte/m57sli ok. Processing mainboard/gigabyte/m57sli (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/gigabyte/m57sli/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL = 0x1 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [42/117] hp/dl145_g3 ok. Processing mainboard/hp/dl145_g3 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [43/117] hp/e_vectra_p2706t ok. Processing mainboard/hp/e_vectra_p2706t (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [44/117] ibm/e325 ok. Processing mainboard/ibm/e325 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [45/117] ibm/e326 ok. Processing mainboard/ibm/e326 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/ibm/e326/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [46/117] iei/juki-511p ok. Processing mainboard/iei/juki-511p (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/iei/juki-511p/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [47/117] iei/nova4899r ok. Processing mainboard/iei/nova4899r (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [48/117] iei/pcisa-lx-800-r10 ok. Processing mainboard/iei/pcisa-lx-800-r10 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [49/117] intel/d945gclf ok. Processing mainboard/intel/d945gclf (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/intel/d945gclf/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xffed8000 +CONFIG_DCACHE_RAM_BASE = 0xffdf8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [50/117] intel/eagleheights ok. Processing mainboard/intel/eagleheights (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x8086 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [51/117] intel/jarrell ok. Processing mainboard/intel/jarrell (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_MAX_REBOOT_CNT = 0x8 +CONFIG_MAX_REBOOT_CNT = 0x3 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [52/117] intel/mtarvon ok. Processing mainboard/intel/mtarvon (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [53/117] intel/truxton ok. Processing mainboard/intel/truxton (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [54/117] intel/xe7501devkit ok. Processing mainboard/intel/xe7501devkit (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [55/117] iwill/dk8_htx ok. Processing mainboard/iwill/dk8_htx (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/iwill/dk8_htx/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc4000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_SIZE = 0xc000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x80000 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [56/117] iwill/dk8s2 ok. Processing mainboard/iwill/dk8s2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [57/117] iwill/dk8x ok. Processing mainboard/iwill/dk8x (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [58/117] jetway/j7f24 ok. Processing mainboard/jetway/j7f24 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/jetway/j7f24/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [59/117] kontron/986lcd-m ok. Processing mainboard/kontron/986lcd-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/kontron/986lcd-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 [60/117] kontron/kt690 ok. Processing mainboard/kontron/kt690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/kontron/kt690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [61/117] lippert/frontrunner ok. Processing mainboard/lippert/frontrunner (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [62/117] lippert/roadrunner-lx ok. Processing mainboard/lippert/roadrunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [63/117] lippert/spacerunner-lx ok. Processing mainboard/lippert/spacerunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [64/117] mitac/6513wu ok. Processing mainboard/mitac/6513wu (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [65/117] msi/ms6119 ok. Processing mainboard/msi/ms6119 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [66/117] msi/ms6147 ok. Processing mainboard/msi/ms6147 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [67/117] msi/ms6156 ok. Processing mainboard/msi/ms6156 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [68/117] msi/ms6178 ok. Processing mainboard/msi/ms6178 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [69/117] msi/ms7135 ok. Processing mainboard/msi/ms7135 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/msi/ms7135/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [70/117] msi/ms7260 ok. Processing mainboard/msi/ms7260 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/msi/ms7260/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [71/117] msi/ms9185 ok. Processing mainboard/msi/ms9185 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/msi/ms9185/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1022 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [72/117] msi/ms9282 ok. Processing mainboard/msi/ms9282 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/msi/ms9282/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [73/117] nec/powermate2000 ok. Processing mainboard/nec/powermate2000 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [74/117] newisys/khepri ok. Processing mainboard/newisys/khepri (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [75/117] nvidia/l1_2pvv ok. Processing mainboard/nvidia/l1_2pvv (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/nvidia/l1_2pvv/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [76/117] olpc/btest ok. Processing mainboard/olpc/btest (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [77/117] olpc/rev_a ok. Processing mainboard/olpc/rev_a (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [78/117] pcengines/alix1c ok. Processing mainboard/pcengines/alix1c (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [79/117] rca/rm4100 ok. Processing mainboard/rca/rm4100 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/rca/rm4100/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [80/117] roda/rk886ex ok. Processing mainboard/roda/rk886ex (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/roda/rk886ex/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES = 0x0 [81/117] soyo/sy-6ba-plus-iii ok. Processing mainboard/soyo/sy-6ba-plus-iii (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [82/117] sunw/ultra40 ok. Processing mainboard/sunw/ultra40 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [83/117] supermicro/h8dme ok. Processing mainboard/supermicro/h8dme (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/supermicro/h8dme/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [84/117] supermicro/h8dmr ok. Processing mainboard/supermicro/h8dmr (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/supermicro/h8dmr/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [85/117] supermicro/h8dmr_fam10 ok. Processing mainboard/supermicro/h8dmr_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/supermicro/h8dmr_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [86/117] supermicro/x6dai_g ok. Processing mainboard/supermicro/x6dai_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [87/117] supermicro/x6dhe_g ok. Processing mainboard/supermicro/x6dhe_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [88/117] supermicro/x6dhe_g2 ok. Processing mainboard/supermicro/x6dhe_g2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [89/117] supermicro/x6dhr_ig ok. Processing mainboard/supermicro/x6dhr_ig (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [90/117] supermicro/x6dhr_ig2 ok. Processing mainboard/supermicro/x6dhr_ig2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [91/117] technexion/tim5690 ok. Processing mainboard/technexion/tim5690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/technexion/tim5690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 [92/117] technexion/tim8690 ok. Processing mainboard/technexion/tim8690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/technexion/tim8690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [93/117] technologic/ts5300 ok. Processing mainboard/technologic/ts5300 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/technologic/ts5300/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 -CONFIG_TTYS0_BASE = 0x2f8 +CONFIG_TTYS0_BASE = 0x3f8 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [94/117] televideo/tc7020 ok. Processing mainboard/televideo/tc7020 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [95/117] thomson/ip1000 ok. Processing mainboard/thomson/ip1000 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/thomson/ip1000/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [96/117] tyan/s1846 ok. Processing mainboard/tyan/s1846 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [97/117] tyan/s2735 ok. Processing mainboard/tyan/s2735 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_USE_PRINTK_IN_CAR = 0x1 +CONFIG_USE_PRINTK_IN_CAR = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [98/117] tyan/s2850 ok. Processing mainboard/tyan/s2850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [99/117] tyan/s2875 ok. Processing mainboard/tyan/s2875 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [100/117] tyan/s2880 ok. Processing mainboard/tyan/s2880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [101/117] tyan/s2881 ok. Processing mainboard/tyan/s2881 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [102/117] tyan/s2882 ok. Processing mainboard/tyan/s2882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [103/117] tyan/s2885 ok. Processing mainboard/tyan/s2885 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [104/117] tyan/s2891 ok. Processing mainboard/tyan/s2891 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/tyan/s2891/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [105/117] tyan/s2892 ok. Processing mainboard/tyan/s2892 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/tyan/s2892/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [106/117] tyan/s2895 ok. Processing mainboard/tyan/s2895 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/tyan/s2895/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 [107/117] tyan/s2912 ok. Processing mainboard/tyan/s2912 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/tyan/s2912/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [108/117] tyan/s2912_fam10 ok. Processing mainboard/tyan/s2912_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/tyan/s2912_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [109/117] tyan/s4880 ok. Processing mainboard/tyan/s4880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [110/117] tyan/s4882 ok. Processing mainboard/tyan/s4882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x2000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [111/117] via/epia-cn ok. Processing mainboard/via/epia-cn (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/epia-cn/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [112/117] via/epia-m ok. Processing mainboard/via/epia-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/epia-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [113/117] via/epia-m700 ok. Processing mainboard/via/epia-m700 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/epia-m700/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_SIZE = 0x2000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HEAP_SIZE = 0x5000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [114/117] via/epia-n ok. Processing mainboard/via/epia-n (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/epia-n/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN400_VIDEO_MB_128MB = 0x0 +CONFIG_CN400_VIDEO_MB_16MB = 0x0 +CONFIG_CN400_VIDEO_MB_32MB = 0x1 +CONFIG_CN400_VIDEO_MB_64MB = 0x0 +CONFIG_CN400_VIDEO_MB_8MB = 0x0 +CONFIG_CN400_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [115/117] via/epia ok. Processing mainboard/via/epia (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_INIT_TIMER = 0x0 +CONFIG_HAVE_INIT_TIMER = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_UDELAY_IO = 0x1 +CONFIG_UDELAY_IO = 0x0 -CONFIG_UDELAY_TSC = 0x0 +CONFIG_UDELAY_TSC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [116/117] via/pc2500e ok. Processing mainboard/via/pc2500e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/pc2500e/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_OPTION_TABLE = 0x1 +CONFIG_USE_OPTION_TABLE = 0x0 [117/117] via/vt8454c ok. Processing mainboard/via/vt8454c (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5074/targets/via/vt8454c/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0

1 0

[commit] r5074 - trunk/src/southbridge/amd/cs5536
by repository service 03 Feb '10

03 Feb '10

Author: oxygene Date: Wed Feb 3 14:49:24 2010 New Revision: 5074 URL: http://tracker.coreboot.org/trac/coreboot/changeset/5074 Log: The UART2 on the AMD cs5536 is incorrectly configured in two places. GPIO lines 4 and 3 are swapped and also incorrectly put in IR mode receive (compound fault). Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Edwin Beasant <edwin_beasant(a)virtensys.com> Modified: trunk/src/southbridge/amd/cs5536/cs5536.c trunk/src/southbridge/amd/cs5536/cs5536_early_setup.c Modified: trunk/src/southbridge/amd/cs5536/cs5536.c ============================================================================== --- trunk/src/southbridge/amd/cs5536/cs5536.c Mon Feb 1 23:51:18 2010 (r5073) +++ trunk/src/southbridge/amd/cs5536/cs5536.c Wed Feb 3 14:49:24 2010 (r5074) @@ -298,7 +298,7 @@ /* Set: OUTAUX1 Select (0x10) */ outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); - /* GPIO8 - UART1_RX */ + /* GPIO9 - UART1_RX */ /* Set: Input Enable (0x20) */ outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE); /* Set: INAUX1 Select (0x34) */ @@ -356,18 +356,18 @@ msr.lo |= sb->com2_irq << 28; wrmsr(MDD_IRQM_YHIGH, msr); - /* GPIO4 - UART2_RX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); - /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); - - /* GPIO3 - UART2_TX */ + /* GPIO3 - UART2_RX */ /* Set: Input Enable (0x20) */ outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE); /* Set: INAUX1 Select (0x34) */ outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT); + /* GPIO4 - UART2_TX */ + /* Set: Output Enable (0x4) */ + outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); + /* Set: OUTAUX1 Select (0x10) */ + outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); + /* Set: GPIO 3 and 4 Pull Up (0x18) */ outl(GPIOL_3_SET | GPIOL_4_SET, gpio_addr + GPIOL_PULLUP_ENABLE); Modified: trunk/src/southbridge/amd/cs5536/cs5536_early_setup.c ============================================================================== --- trunk/src/southbridge/amd/cs5536/cs5536_early_setup.c Mon Feb 1 23:51:18 2010 (r5073) +++ trunk/src/southbridge/amd/cs5536/cs5536_early_setup.c Wed Feb 3 14:49:24 2010 (r5074) @@ -172,6 +172,7 @@ outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); /* Set: OUTAUX1 Select (0x10) */ outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT); + /* GPIO9 - UART1_RX */ /* Set: Input Enable (0x20) */ outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);

1 0

[PATCH] (resend to mailing list) COM2 on Geode
by Edwin Beasant 03 Feb '10

03 Feb '10

Tested on Norwich-type board as working. Acked-by: Edwin Beasant <edwin_beasant(a)virtensys.com> ________________________________ From: coreboot-bounces(a)coreboot.org [mailto:coreboot-bounces@coreboot.org] On Behalf Of Stefan Reinauer Sent: 03 February 2010 13:20 To: coreboot Subject: [coreboot] [PATCH] (resend to mailing list) COM2 on Geode See patch.

1 0

[PATCH] (resend to mailing list) COM2 on Geode
by Stefan Reinauer 03 Feb '10

03 Feb '10

See patch.

1 0

LinuxBIOS V1 ?!
by Tyson Sawyer 02 Feb '10

02 Feb '10

Hello, A small voice from the distant past here. I have a custom system using LinuxBIOS V1. Yes! 1! This is a PIII/440BX based system. We have found that we can boot 2.6.23-17, but can not boot 2.6.24. Investigation using characters posted on the serial port suggest that we are starting the kernel and getting to about the point where the clock speed of the CPU and then it just stops as far as we can tell. We've found that if we put in more output to the serial port, it dies earlier in the code. We can't be sure, bit it appears that it might be some sort of a time based problem. It dies after a certain amount of time and if we use that time by polling characters out the serial port, then we don't get as far through the code before death. One thought that almost fits the facts is that a interrupt might be occurring and not handled properly. But it happens that the CPU clock speed code disables interrupts and this is where it is dying. There seems to have been a number of changes in 2.6.24 to support booting kernels in virtual machines and to merge ia64 and ia32 under x86. Some notes were added about 32 bit boot loaders that reference LinuxBIOS. However, we've been unable to find what it is that we are doing wrong. We have grep'ed the internet and browsed through the CoreBoot email archives, but failed to find anything that might have been in either "place". Anyone out there have any suggestions or know what happened during 2.6.24 development that might have changed the requirements for successfully starting a kernel? Thanks! Ty -- Tyson D Sawyer iRobot Corporation Lead Systems Engineer Government & Industrial Robotics tsawyer(a)irobot.com Robots for the Real World 781-418-3329 http://www.irobot.com

5 6

Re: [coreboot] M2A-VM bios chip replacement
by Carl-Daniel Hailfinger 02 Feb '10

02 Feb '10

On 02.02.2010 21:54, mpantera2004(a)op.pl wrote: > What bios chip can i bay for Asus m2a-vm maybe 2MB(16Mb). > Original is winbond w39v080a. > SST49LF080A (1 MByte, 8 Mbit) SST49LF160C (2 MByte, 16 Mbit) Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

M2A-VM bios chip replacement
by mpantera2004＠op.pl 02 Feb '10

02 Feb '10

What bios chip can i bay for Asus m2a-vm maybe 2MB(16Mb). Original is winbond w39v080a. Thanks. Michal

1 0

arima irq issues
by Hugh Greenberg 02 Feb '10

02 Feb '10

Hello again. I still have issues with the ARIMA. I am now getting errors from Linux regarding IRQs and the MP table. I've tried various Linux options and none of them have helped. This seems to be preventing the ethernet and myrinet cards from functioning. Here is the relevant output: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC boot interrupts on PCI device 0x1022:0x746b already disabled pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled �serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:04.6: can't find IRQ for PCI INT B; probably buggy MP table brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:03:00.0: can't find IRQ for PCI INT D; probably buggy MP table ohci_hcd 0000:03:00.0: Found HC with no IRQ. Check BIOS/PCI 0000:03:00.0 setup! ohci_hcd 0000:03:00.0: init 0000:03:00.0 fail, -19 ohci_hcd 0000:03:00.1: can't find IRQ for PCI INT D; probably buggy MP table ohci_hcd 0000:03:00.1: Found HC with no IRQ. Check BIOS/PCI 0000:03:00.1 setup! ohci_hcd 0000:03:00.1: init 0000:03:00.1 fail, -19 uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. Clocksource tsc unstable (delta = 148473685 ns) serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel(a)redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 5:661:239 rtc_cmos rtc_cmos: setting system clock to 2009-12-22 17:12:30 UTC (1261501950) Initalizing network drop monitor service Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting hostname m91: [ OK ] Setting up Logical Volume Management: [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Starting gm... Warning: /dev/gm* devices were not created, doing it now... active mapper... done. Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed; no link present. Check cable? [FAILED] Bringing up interface myri0: Determining IP information for myri0...RTNETLINK answers: Input/output error Any ideas? Thanks. -- Hugh Greenberg

3 5

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2010