[commit] r5075 - in trunk: src/mainboard/supermicro src/mainboard/supermicro/h8qme_fam10 targets/supermicro/h8qme_fam10
Author: oxygene Date: Wed Feb 3 17:04:40 2010 New Revision: 5075 URL: http://tracker.coreboot.org/trac/coreboot/changeset/5075
Log: This patch adds the Supermicro H8QME-2+ (fam10) Motherboard with the following remaining issues: - ACPI not working - SMBus gets irq 0 instead of 5 - Loading VGA rom fails (using seabios to do it)
(copied a newer Makefile.inc from h8dmr_fam10 vs. the patch on the list)
Signed-off-by: Knut Kujat knuku@gap.upv.es Acked-by: Patrick Georgi patrick.georgi@coresystems.de
Added: trunk/src/mainboard/supermicro/h8qme_fam10/ trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c trunk/src/mainboard/supermicro/h8qme_fam10/chip.h trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h trunk/targets/supermicro/h8qme_fam10/ trunk/targets/supermicro/h8qme_fam10/Config.lb trunk/targets/supermicro/h8qme_fam10/VERSION Modified: trunk/src/mainboard/supermicro/Kconfig
Modified: trunk/src/mainboard/supermicro/Kconfig ============================================================================== --- trunk/src/mainboard/supermicro/Kconfig Wed Feb 3 14:49:24 2010 (r5074) +++ trunk/src/mainboard/supermicro/Kconfig Wed Feb 3 17:04:40 2010 (r5075) @@ -5,6 +5,7 @@ source "src/mainboard/supermicro/h8dme/Kconfig" source "src/mainboard/supermicro/h8dmr/Kconfig" source "src/mainboard/supermicro/h8dmr_fam10/Kconfig" +source "src/mainboard/supermicro/h8qme_fam10/Kconfig" source "src/mainboard/supermicro/x6dai_g/Kconfig" source "src/mainboard/supermicro/x6dhe_g/Kconfig" source "src/mainboard/supermicro/x6dhe_g2/Kconfig"
Added: trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Config.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,349 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## CONFIG_XIP_ROM_SIZE must be a power of 2. +# for testing with -O != s. FIXME +#default CONFIG_XIP_ROM_SIZE = 128 * 1024 +default CONFIG_XIP_ROM_SIZE = 128 * 1024 +include /config/failovercalculation.lb + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end + + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + end + else + makerule ./auto.inc + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end + +if CONFIG_USE_FAILOVER_IMAGE +else + if CONFIG_AP_CODE_IN_CAR + makerule ./apc_auto.o + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" + end + end +end + + +## +## Build our 16 bit and 32 bit coreboot entry code +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc + + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end + +## +## Build our reset vector (This is where coreboot is entered) +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +## +## ROMSTRAP table for MCP55 +## +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +end + + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc + +### +### This is the early phase of coreboot startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE + ldscript /arch/i386/lib/failover_failover.lds + end +else + if CONFIG_USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + end +end + +## +## Setup RAM +## + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +## +## Include the secondary Configuration files +## +config chip.h + +dir /southbridge/nvidia/mcp55 +dir /southbridge/amd/amd8132 + +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # SB on link 2.0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic #dimm 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic #dimm 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic #dimm 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic #dimm 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic #dimm 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic #dimm 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic #dimm 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic #dimm 1-1-1 + # device i2c 57 on end + # end + # chip drivers/generic/generic #dimm 2-0-0 + # device i2c 58 on end + # end + # chip drivers/generic/generic #dimm 2-0-1 + # device i2c 59 on end + # end + # chip drivers/generic/generic #dimm 2-1-0 + # device i2c 5a on end + # end + # chip drivers/generic/generic #dimm 2-1-1 + # device i2c 5b on end + # end + # chip drivers/generic/generic #dimm 3-0-0 + # device i2c 5c on end + # end + # chip drivers/generic/generic #dimm 3-0-1 + # device i2c 5d on end + # end + # chip drivers/generic/generic #dimm 3-1-0 + # device i2c 5e on end + # end + # chip drivers/generic/generic #dimm 3-1-1 + # device i2c 5f on end + # end + + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will diepend on addon pci device, do we need to scan_smbus_bus? +# + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 off end # AZA + device pci 7.0 on + device pci 1.0 on end + end + device pci 8.0 off end + device pci 9.0 off end + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on + chip southbridge/amd/amd8132 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 3.0 on end + device pci 3.1 on end + end + device pci 1.1 on end + + end #amd8132 + + end #device pci 19.0 + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex
Added: trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Kconfig Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,143 @@ +config BOARD_SUPERMICRO_H8QME_FAM10 + bool "H8QME-2+ (Fam10)" + select ARCH_X86 + select CPU_AMD_SOCKET_F_1207 + select NORTHBRIDGE_AMD_AMDFAM10 + select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select USE_PRINTK_IN_CAR + select USE_DCACHE_RAM + select HAVE_HARD_RESET + select LIFT_BSP_APIC_ID + select AMDMCT + select BOARD_ROMSIZE_KB_1024 + select TINY_BOOTBLOCK + select ENABLE_APIC_EXT_ID + +config MAINBOARD_DIR + string + default supermicro/h8qme_fam10 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config DCACHE_RAM_GLOBAL_VAR_SIZE + hex + default 0x04000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config RAMBASE + hex + default 0x200000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config RAMTOP + hex + default 0x1000000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HEAP_SIZE + hex + default 0xc0000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config APIC_ID_OFFSET + hex + default 0x0 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MEM_TRAIN_SEQ + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_UNITID_OFFSET_ONLY + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config LB_CKS_LOC + int + default 123 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAINBOARD_PART_NUMBER + string + default "H8QME-2+ (Fam10)" + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAX_CPUS + int + default 16 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAX_PHYSICAL_CPUS + int + default 4 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config USE_INIT + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config IRQ_SLOT_COUNT + int + default 11 + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_0100009f.h" + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config SERIAL_CPU_INIT + bool + default n + depends on BOARD_SUPERMICRO_H8QME_FAM10 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x1511 + depends on BOARD_SUPERMICRO_H8QME_FAM10
Added: trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Makefile.inc Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,71 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +driver-y += mainboard.o + +# Needed by irq_tables and mptable and acpi_tables. +obj-y += get_bus_conf.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o + +# This is part of the conversion to init-obj and away from included code. + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0s := $(src)/cpu/x86/32bit/entry32.inc +crt0s += $(src)/cpu/amd/car/cache_as_ram.inc +crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc + +ldscripts := $(src)/arch/i386/init/ldscript_fallback_cbfs.lb +ldscripts += $(src)/cpu/x86/32bit/entry32.lds +ldscripts += $(src)/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl + iasl -p $(obj)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' $(obj)/pci2.hex + mv $(obj)/pci2.hex $(obj)/ssdt2.c + +$(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl" + iasl -p $(obj)/pci3 -tc $(CONFIG_MAINBOARD)/ + perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' $(obj)/pci3.hex + mv $(obj)/pci3.hex $(obj)/ssdt3.c + +$(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl" + iasl -p $(obj)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' $(obj)/pci4.hex + mv $(obj)/pci4.hex $(obj)/ssdt4.c + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@ + perl -e 's/.rodata/.rom.data/g' -pi $@ + perl -e 's/.text/.section .rom.text/g' -pi $@ + +endif +
Added: trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/Options.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,368 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_CROSS_COMPILE +uses CC +uses HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_VGA +uses CONFIG_CONSOLE_VGA +uses CONFIG_VGA_ROM_RUN +uses CONFIG_PCI_ROM_RUN +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC + +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses CONFIG_SERIAL_CPU_INIT + +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses CONFIG_RAMTOP + +uses CONFIG_UNCOMPRESSED + +uses CONFIG_PCI_BUS_SEGN_BITS + +uses CONFIG_AP_CODE_IN_CAR + +uses CONFIG_MEM_TRAIN_SEQ + +uses CONFIG_WAIT_BEFORE_CPUS_INIT + +uses CONFIG_AMDMCT + +uses CONFIG_USE_PRINTK_IN_CAR +uses CONFIG_AMD_UCODE_PATCH_FILE +uses CONFIG_ID_SECTION_OFFSET + +uses CONFIG_PIRQ_ROUTE + +default CONFIG_PIRQ_ROUTE = 1 + + +### +### Build options +### + +## +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +## +default CONFIG_ROM_SIZE=1024*1024 + +## +## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use +default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE +default CONFIG_FAILOVER_SIZE=0x02000 + +#more 1M for pgtbl +default CONFIG_RAMTOP=16384*1024 +#default CONFIG_RAMTOP=16384*8192 +## +## Build code for the fallback boot +## +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 + +## +## Build code to reset the motherboard from coreboot +## +default CONFIG_HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default CONFIG_GENERATE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +##default CONFIG_GENERATE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 + +## ACPI tables will be included +default CONFIG_GENERATE_ACPI_TABLES=0 + +## +## Build code to export a CMOS option table +## +default CONFIG_HAVE_OPTION_TABLE=1 + +## +## Move the default coreboot cmos range off of AMD RTC registers +## +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_PHYSICAL_CPUS=4 +default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS +default CONFIG_LOGICAL_CPUS=1 + +default CONFIG_SERIAL_CPU_INIT=1 + +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x00 +default CONFIG_LIFT_BSP_APIC_ID=1 + +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 +#1G +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#VGA Console +default CONFIG_VGA=0 +default CONFIG_CONSOLE_VGA=1 +default CONFIG_VGA_ROM_RUN=1 +default CONFIG_PCI_ROM_RUN=0 + +#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device +default CONFIG_HT_CHAIN_UNITID_BASE=1 + +#real SB Unit ID, default is 0x20, mean dont touch it at last +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 + +#make the SB HT chain on bus 0, default is not (0) +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 + +#only offset for SB chain?, default is yes(1) +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## enable CACHE_AS_RAM specifics +## +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xc4000 +default CONFIG_DCACHE_RAM_SIZE=0x0c000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 +default CONFIG_USE_INIT=0 + +default CONFIG_MEM_TRAIN_SEQ=2 +default CONFIG_WAIT_BEFORE_CPUS_INIT=0 +default CONFIG_AMDMCT = 1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default CONFIG_MAINBOARD_PART_NUMBER="h8qme (Fam10)" +default CONFIG_MAINBOARD_VENDOR="Supermicro" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 + +## +## Set microcode patch file name +## +## Barcelona rev Ax: "mc_patch_01000020.h" +## Barcelona rev B0, B1, BA: "mc_patch_01000084.h" +## Barcelona rev B2, B3: "mc_patch_01000083.h" +## Shanghai rev RB-C2: "mc_patch_01000086.h" +## Shanghai rev DA-C2: "mc_patch_0100009f.h" +## +#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h" +default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h" + +### +### coreboot layout values +### + +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 0x1e000 + + +default CONFIG_STACK_SIZE=0x10000 +default CONFIG_HEAP_SIZE= 0xc000 + + +## +## Only use the option table in a normal image +## +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) + +## +## Coreboot C code runs at this location in RAM +## +default CONFIG_RAMBASE=0x00200000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD = 1 + +#default CONFIG_COMPRESSED_PAYLOAD = 1 + +# CBFS will take care of payload compression +default CONFIG_UNCOMPRESSED = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## +default CONFIG_USE_PRINTK_IN_CAR=1 + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +#default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 + +# Select the serial console base port +default CONFIG_TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default CONFIG_TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5 +## At a maximum only compile in this level of debugging +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5 + +## +## Select power on after power fail setting +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +default CONFIG_USE_FAILOVER_IMAGE=0 +default CONFIG_USE_FALLBACK_IMAGE=0 +default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE + +default CONFIG_ID_SECTION_OFFSET=0x80 +### End Options.lb +end
Added: trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/apc_auto.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif + +#include "arch/i386/lib/console.c" +#include "lib/uart8250.c" +#include "console/vtxprintf.c" +#include "./arch/i386/lib/printk_init.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include <cpu/amd/model_fxx_rev.h> + +//#include "northbridge/amd/amdk8/raminit.h" +#include "northbridge/amd/amkfam10/raminit.h" + +#include "cpu/amd/model_fxx/apic_timer.c" + +#include "lib/delay.c" + +//#include "cpu/x86/lapic/boot_cpu.c" + +//#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdfam10/reset_test.c" + +//#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdfam10/debug.c" + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +//#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdfam10/amdfam10.h" + +#include "cpu/x86/mtrr.h" +#include "cpu/amd/mtrr.h" +#include "cpu/x86/tsc.h" + +//#include "northbridge/amd/amdk8/amdk8_f_pci.c" +#include "northbridge/amd/amdfam10/amdfam10_pci.c" + +#include "northbridge/amd/amdk8/raminit_f_dqs.c" +//#include "northbridge/amd/amdfam10/raminit_f_dqs.c" + +static inline unsigned get_nodes(void) +{ + return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; +} + +//#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/quadcore/quadcore.c" + +void hardwaremain(int ret_addr) +{ + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_RAMTOP) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + + struct node_core_id id; + + id = get_node_core_id_x(); + + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + + train_ram(id.nodeid, sysinfo, sysinfox); + + /* + go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp + */ + + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); + + + +} +struct eregs { + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +void x86_exception(struct eregs *info) +{ + do { + hlt(); + } while(1); +} + +
Added: trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/cache_as_ram_auto.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,380 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#define QRANK_DIMM_SUPPORT 1 + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + +#define FAM10_SET_FIDVID 1 +#define FAM10_SET_FIDVID_CORE_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" + +static void post_code(u8 value) { + outb(value, 0x80); +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "lib/ramtest.c" + +#include <cpu/amd/model_10xxx_rev.h> + +//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" + +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdfam10/reset_test.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" +#include "superio/winbond/w83627hf/w83627hf_early_init.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdfam10/debug.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" + + +#include "northbridge/amd/amdfam10/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdht/ht_wrapper.c" + +#include "include/cpu/x86/mem.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/raminit_amdmct.c" +#include "northbridge/amd/amdfam10/amdfam10_pci.c" + +#include "resourcemap.c" + +#include "cpu/amd/quadcore/quadcore.c" + +#define MCP55_NUM 1 +#define MCP55_USE_NIC 1 +#define MCP55_USE_AZA 1 + +#define MCP55_PCI_E_X_0 4 + +#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" +#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" + +#include "cpu/amd/car/copy_and_run.c" + +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_10xxx/init_cpus.c" + +#include "cpu/amd/model_10xxx/fidvid.c" + +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" +#include "northbridge/amd/amdfam10/early_ht.c" + + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + enable_smbus(); +// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "spd_addr.h" +#include "cpu/amd/microcode/microcode.c" +#include "cpu/amd/model_10xxx/update_microcode.c" + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + u32 bsp_apicid = 0; + u32 val; + u32 wants_reset; + msr_t msr; + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + post_code(0x32); + + pnp_enter_ext_func_mode(SERIAL_DEV); + pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6)); + w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); + pnp_exit_ext_func_mode(SERIAL_DEV); + + uart_init(); + console_init(); + printk_debug("\n"); + + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + val = cpuid_eax(1); + printk_debug("BSP Family_Model: %08x \n", val); + printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk_debug("bsp_apicid = %02x \n", bsp_apicid); + printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + /* Core0 on each node is configured. Now setup any additional cores. */ + printk_debug("start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if FAM10_SET_FIDVID == 1 + msr = rdmsr(0xc0010071); + printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); +#endif + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + + post_code(0x3B); + +/* It's the time to set ctrl in sysinfo now; */ +printk_debug("fill_mem_ctrl()\n"); +fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + +post_code(0x3D); + +//printk_debug("enable_smbus()\n"); +// enable_smbus(); /* enable in sio_setup */ + +post_code(0x3E); + + memreset_setup(); + +post_code(0x40); + + + printk_debug("raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +// printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x42); // Should never see this post code. + +} + + +#endif
Added: trunk/src/mainboard/supermicro/h8qme_fam10/chip.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/chip.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +};
Added: trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/cmos.layout Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,119 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 quad_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory1 + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + +
Added: trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/devicetree.cb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,165 @@ +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # SB on link 2.0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on #nec pci-x + end + device pci 0.1 on #nec pci-x + device pci 4.0 on end #scsi + device pci 4.1 on end #scsi + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex
Added: trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/quadcore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +unsigned sbdn3; + + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i, j; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + m->bus_type[0] = 1; //pci + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + + m->bus_8132_0 = (sysconf.pci1234[1] >> 12) & 0xff; + sbdn3 =(sysconf.hcdn[1] & 0xff); // first byte of second chain + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + +/*8132_1*/ + + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3,0)); + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8132_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_8132_2++; +/*8132_2*/ + + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3+1,0)); + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + + for(i=0; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff; + for (j = busn; j <= busn_max; j++) + m->bus_type[j] = 1; + if(m->bus_isa <= busn_max) + m->bus_isa = busn_max + 1; + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_mcp55 = apicid_base+0; + m->apicid_8132_1 = apicid_base+1; + m->apicid_8132_2 = apicid_base+2; +}
Added: trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/irq_tables.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern void get_bus_conf(void); + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0364; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +}
Added: trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mainboard.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("Supermicro H8QME Mainboard (Family 10)") +};
Added: trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; + unsigned bus_type[256]; + +unsigned char bus_8132_0; //7 +unsigned char bus_8132_1; //8 +unsigned char bus_8132_2; //9 +unsigned apicid_8132_1; +unsigned apicid_8132_2; + +}; + +#endif +
Added: trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/mptable.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern void get_bus_conf(void); +extern unsigned sbdn3; + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "SUPERMIC"; + static const char productid[12] = "H8QME "; + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + + + int i,j; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(j= 0; j < 256 ; j++) { + if(m->bus_type[j]) + smp_write_bus(mc, j, "PCI "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); + + + + + + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + +//void smp_write_ioapic(struct mp_config_table *mc, unsigned char id, unsigned char ver, unsigned long apicaddr); + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + + + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x00000ab5; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x5ab0a500; + pci_write_config32(dev, 0x80, dword); + + dword = 0xa000000b; + dword = 0x10000002; + pci_write_config32(dev, 0x84, dword); + + } + + /* 8132_1*/ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3,1)); + res = find_resource(dev,PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base); + + /* 8132_2*/ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3+1,1)); + res = find_resource(dev,PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base); + + +} + + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID * PIN# */ +smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); + +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0x5); /* 5 SMBus! Not correctly assign!!*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0xb); /* 11 USB, OK */ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0xa); /* 10 USB, OK */ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x5); /* 5 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0xa); /* 10 VGA, OK*/ + +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|0, m->apicid_mcp55, 0x5); /* 5 eth0, OK*/ +smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|1, m->apicid_mcp55, 0xb); /* 11 eth1, OK*/ + + +for(j=7;j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +}
Added: trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/resourcemap.c Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} +
Added: trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/supermicro/h8qme_fam10/spd_addr.h Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * This file defines the SPD addresses for the mainboard. Must be included in + * cache_as_ram_auto.c + */ + +#define RC00 0 +#define RC01 1 +#define RC02 2 +#define RC03 3 +#define RC04 4 +#define RC05 5 +#define RC06 6 +#define RC07 7 +#define RC08 8 +#define RC09 9 +#define RC10 10 +#define RC11 11 +#define RC12 12 +#define RC13 13 +#define RC14 14 +#define RC15 15 +#define RC16 16 +#define RC17 17 +#define RC18 18 +#define RC19 19 +#define RC20 20 +#define RC21 21 +#define RC22 22 +#define RC23 23 +#define RC24 24 +#define RC25 25 +#define RC26 26 +#define RC27 27 +#define RC28 28 +#define RC29 29 +#define RC30 30 +#define RC31 31 + +#define RC32 32 +#define RC33 33 +#define RC34 34 +#define RC35 35 +#define RC36 36 +#define RC37 37 +#define RC38 38 +#define RC39 39 +#define RC40 40 +#define RC41 41 +#define RC42 42 +#define RC43 43 +#define RC44 44 +#define RC45 45 +#define RC46 46 +#define RC47 47 +#define RC48 48 +#define RC49 49 +#define RC50 50 +#define RC51 51 +#define RC52 52 +#define RC53 53 +#define RC54 54 +#define RC55 55 +#define RC56 56 +#define RC57 57 +#define RC58 58 +#define RC59 59 +#define RC60 60 +#define RC61 61 +#define RC62 62 +#define RC63 63 + + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + // third node + RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, + // forth node + RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, +#endif +}; +
Added: trunk/targets/supermicro/h8qme_fam10/Config.lb ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/targets/supermicro/h8qme_fam10/Config.lb Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1,46 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@gmail.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target h8qme_fam10 +mainboard supermicro/h8qme_fam10 + +romimage "normal" + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" + payload ../seabios.elf +# payload /home/knut/Documents/final/filo.elf +# payload ../payload.elf +end + +romimage "fallback" + option CONFIG_USE_FALLBACK_IMAGE=1 + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" + payload ../seabios.elf +# payload /home/knut/Documents/final/filo.elf +# payload ../payload.elf +end + +romimage "failover" + option CONFIG_USE_FAILOVER_IMAGE=1 + option CONFIG_ROM_IMAGE_SIZE=CONFIG_FAILOVER_SIZE + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" +end + +buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback" "failover"
Added: trunk/targets/supermicro/h8qme_fam10/VERSION ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/targets/supermicro/h8qme_fam10/VERSION Wed Feb 3 17:04:40 2010 (r5075) @@ -0,0 +1 @@ +_h8qme_fam10
-
repository service