Author: ward
Date: 2008-08-06 23:03:47 +0200 (Wed, 06 Aug 2008)
New Revision: 215
Removed:
buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch
buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch
Modified:
buildrom-devel/packages/mkelfimage/mkelfimage.mk
Log:
The upstream for mkelfimage at lnxi has become somewhat unreliable. Reconfigure
buildrom to pull it from our svn tree, where we've had a copy for a while.
Signed-off-by: Ward Vandewege <ward(a)gnu.org>
Acked-by: Jordan Crouse <jordan.crouse(a)amd.com>
Deleted: buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,563 +0,0 @@
-[PATCH] mkelfImage: Take elf64 vmlinux and produce elf32
-
-change to use e_entry instead of hardcode for vmlinux
-if e_entry is not equal to paddr of fist phdr, will use paddr instead, and not switch to 64bit in convert
-otherwise will use e_entry and switch to 64bit in convert
-
-also fix the bss_size calculation.
-
-Signed-off-By: Yinghai Lu <yinghai.lu(a)amd.com>
-
-diff -uNr mkelfImage-2.7/linux-i386/convert.h mkelfImage-2.7.new/linux-i386/convert.h
---- mkelfImage-2.7/linux-i386/convert.h 2006-03-17 06:08:21.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/convert.h 2006-11-08 12:32:15.000000000 -0800
-@@ -3,6 +3,8 @@
- #define CONVERTLOC 0x10000
- #define REAL_MODE_DATA_LOC 0x20000
- #define GDTLOC 0x21000
-+#define GDT64LOC 0x22000
-+#define PGTLOC 0x23000
-
- #define DEFAULT_ROOT_DEV ((0x3<<8)| 0)
-
-@@ -18,10 +20,13 @@
- struct image_parameters {
- uint32_t convert_magic; /* a signature to verify mkelfImage was built properly */
- uint32_t gdt_size;
-+ uint32_t gdt64_size;
-+ uint32_t pgt_size;
- uint32_t bss_size;
- uint16_t ramdisk_flags;
- uint16_t root_dev;
- uint32_t entry;
-+ uint32_t switch_64;
- uint32_t initrd_start;
- uint32_t initrd_size;
- uint8_t cmdline[CMDLINE_MAX];
-diff -uNr mkelfImage-2.7/linux-i386/convert.lds mkelfImage-2.7.new/linux-i386/convert.lds
---- mkelfImage-2.7/linux-i386/convert.lds 2003-01-16 13:41:14.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/convert.lds 2006-11-08 12:19:12.000000000 -0800
-@@ -27,7 +27,7 @@
- *(.bss)
- }
- _end = . ;
-- bss_size = _end - _bss;
-+ bss_sizex = _end - _bss;
-
- /DISCARD/ : {
- *(.comment)
-diff -uNr mkelfImage-2.7/linux-i386/head.S mkelfImage-2.7.new/linux-i386/head.S
---- mkelfImage-2.7/linux-i386/head.S 2003-01-24 14:48:03.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/head.S 2006-11-08 12:19:32.000000000 -0800
-@@ -59,7 +59,7 @@
- movl $GDTLOC, %edi
- movl $(gdt_end - gdt), %ecx
- rep movsb
--
-+
- # Linux makes stupid assumptions about the segments
- # that are already setup, so setup a new gdt & ldt
- # and then reload the segment registers.
-@@ -95,22 +95,113 @@
- # Flag to indicate we are the bootstrap processor
- xorl %ebx, %ebx
-
-+ movl switch_64, %eax
-+ cmp $1, %eax
-+ jz switch_to_64
-+
- # Clear the unspecified registers for good measure
- xorl %eax, %eax
- xorl %ecx, %ecx
- xorl %edx, %edx
- xorl %edi, %edi
-- xorl %esp, %esp
- xorl %ebp, %ebp
-+
-+ # do not clear esp, we still need to use lret later
-+
-+ pushl $PROT_CODE_SEG
-+ movl entry, %eax
-+ pushl %eax
-+
-+ lret
-+
-+switch_to_64:
-+
-+ /* We need to switch to 64bit before use startup_64 entry go to kernel */
-+ /*
-+ * Prepare for entering 64 bit mode
-+ */
-+ # Move the gdt64 where Linux will not smash it during decompression
-+ movl %esi, %eax # save the real mode pointer
-+ movl $gdt64, %esi
-+ movl $GDT64LOC, %edi
-+ movl $(gdt64_end - gdt64), %ecx
-+ rep movsb
-+ movl %eax, %esi
-+
-+ /* Load new GDT with the 64bit segments using 32bit descriptor */
-+ lgdt gdt64
-+
-+ /* Enable PAE mode */
-+ xorl %eax, %eax
-+ btsl $5, %eax
-+ movl %eax, %cr4
-+
-+ /*
-+ * Build early 4G boot pagetable
-+ */
-+ /* Initialize Page tables to 0*/
-+ movl $PGTLOC, %edi
-+ xorl %eax, %eax
-+ movl $((4096*6)/4), %ecx
-+ rep stosl
-+
-+ /* Build Level 4 */
-+ movl $(PGTLOC + 0), %edi
-+ leal 0x1007 (%edi), %eax
-+ movl %eax, 0(%edi)
-+
-+ /* Build Level 3 */
-+ movl $(PGTLOC + 0x1000), %edi
-+ leal 0x1007(%edi), %eax
-+ movl $4, %ecx
-+1: movl %eax, 0x00(%edi)
-+ addl $0x00001000, %eax
-+ addl $8, %edi
-+ decl %ecx
-+ jnz 1b
-+
-+ /* Build Level 2 */
-+ movl $(PGTLOC + 0x2000), %edi
-+ movl $0x00000183, %eax
-+ movl $2048, %ecx
-+1: movl %eax, 0(%edi)
-+ addl $0x00200000, %eax
-+ addl $8, %edi
-+ decl %ecx
-+ jnz 1b
-+
-+ /* Enable the boot page tables */
-+ movl $PGTLOC, %eax
-+ movl %eax, %cr3
-+
-+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
-+ movl $0xc0000080, %ecx
-+ rdmsr
-+ btsl $8, %eax
-+ wrmsr
-+
-+ /* Preparing for 64bit jmp */
-+ pushl $PROT_CODE_SEG
-+ movl entry, %eax
-+ pushl %eax
-+
-+ /* Enter paged protected Mode, activating Long Mode */
-+ xorl %eax, %eax
-+ btsl $31, %eax
-+ btsl $0, %eax
-+ movl %eax, %cr0
-+
-+ /*
-+ * At this point we're in long mode but in 32bit compatibility mode
-+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
-+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-+ */
-
--
-- # Jump to the linux kernel
-- ljmp $ PROT_CODE_SEG , $ 0x100000
-+ lret
-
-
- /* Routines to query the BIOS... */
--
--
- /**************************************************************************
- E820_MEMSIZE - Get a listing of memory regions
- **************************************************************************/
-@@ -409,6 +500,7 @@
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-+
- /*
- * The layout of the per-CPU GDT under Linux:
- *
-@@ -446,7 +538,14 @@
- */
- gdt_end:
-
--
-+gdt64:
-+ .word gdt64_end - gdt64
-+ .long GDT64LOC
-+ .word 0
-+ .quad 0x0000000000000000 /* NULL descriptor */
-+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
-+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
-+gdt64_end:
-
- .section ".trailer", "a"
- /* Constants set at build time, these are at the very end of my image */
-@@ -458,14 +557,20 @@
- .long CONVERT_MAGIC
- gdt_size:
- .long gdt_end - gdt
-+gdt64_size:
-+ .long gdt64_end - gdt64
-+pgt_size:
-+ .long 4096*6
- bss_size:
-- .long bss_size
-+ .long bss_sizex
- ramdisk_flags:
- .word 0
- root_dev:
- .word DEFAULT_ROOT_DEV
- entry:
- .long 0
-+switch_64:
-+ .long 0
- initrd_start:
- .long 0
- initrd_size:
-diff -uNr mkelfImage-2.7/linux-i386/mkelf-linux-i386.c mkelfImage-2.7.new/linux-i386/mkelf-linux-i386.c
---- mkelfImage-2.7/linux-i386/mkelf-linux-i386.c 2006-03-17 06:08:22.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/mkelf-linux-i386.c 2006-11-08 09:54:58.000000000 -0800
-@@ -19,13 +19,16 @@
- static void (*parse_kernel_type)(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
- static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
- static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
-+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
-+
-+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size);
-
- char *vmlinux_i386_probe(char *kernel_buf, off_t kernel_size)
- {
- Elf32_Ehdr *ehdr;
- Elf32_Phdr *phdr;
- int i;
-- int hdr1, hdr2;
-+ int phdrs;
- ehdr = (Elf32_Ehdr *)kernel_buf;
- if (
- (ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
-@@ -35,7 +38,8 @@
- return "No ELF signature found on kernel\n";
- }
- if (ehdr->e_ident[EI_CLASS] != ELFCLASS32) {
-- return "Not a 32bit ELF kernel\n";
-+ return vmlinux_x86_64_probe(kernel_buf, kernel_size);
-+// return "Not a 32bit ELF kernel\n";
- }
- if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
- return "Not a little endian ELF kernel\n";
-@@ -54,27 +58,64 @@
- return "Kernel uses bad program header size.\n";
- }
- phdr = (Elf32_Phdr *)(kernel_buf + le32_to_cpu(ehdr->e_phoff));
-- hdr1 = hdr2 = -1;
-- for(i = 0; i < le32_to_cpu(ehdr->e_phnum); i++) {
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
- if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
-- if (((hdr1 != -1) &&
-- ((le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff) != 0x100000)) ||
-- (hdr2 != -1)) {
-- return "Too many PT_LOAD segments to be a linux kernel\n";
-- }
-- if (hdr1 == -1) {
-- hdr1 = i;
-- } else {
-- hdr2 = i;
-- }
-+ phdrs++;
- }
-- if (hdr1 == -1) {
-+ if (phdrs == 0) {
- return "No PT_LOAD segments!\n";
- }
- parse_kernel_type = parse_elf32_kernel;
- return 0;
- }
-+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size)
-+{
-+ Elf64_Ehdr *ehdr;
-+ Elf64_Phdr *phdr;
-+ int i;
-+ int phdrs = 0;
-+ ehdr = (Elf64_Ehdr *)kernel_buf;
-+ if (
-+ (ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
-+ (ehdr->e_ident[EI_MAG1] != ELFMAG1) ||
-+ (ehdr->e_ident[EI_MAG2] != ELFMAG2) ||
-+ (ehdr->e_ident[EI_MAG3] != ELFMAG3)) {
-+ return "No ELF signature found on kernel\n";
-+ }
-+ if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) {
-+ return "Not a 64bit ELF kernel\n";
-+ }
-+ if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
-+ return "Not a little endian ELF kernel\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_type) != ET_EXEC) {
-+ return "Not an executable kernel\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_machine) != EM_X86_64) {
-+ return "Not an x86_64 kernel\n";
-+ }
-+ if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) ||
-+ (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) {
-+ return "Kernel not using ELF version 1.\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) {
-+ return "Kernel uses bad program header size.\n";
-+ }
-+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ continue;
-+ phdrs++;
-+ }
-+ if (phdrs == 0) {
-+ return "No PT_LOAD segments!\n";
-+ }
-+ parse_kernel_type = parse_elf64_kernel;
-+ return 0;
-+}
-
- char *bzImage_i386_probe(char *kernel_buf, off_t kernel_size)
- {
-@@ -118,17 +159,14 @@
-
- struct kernel_info
- {
-- void *kernel;
-- size_t filesz;
-- size_t memsz;
-- size_t paddr;
-- size_t vaddr;
-- void *kernel2;
-- size_t filesz2;
-- size_t memsz2;
-- size_t paddr2;
-- size_t vaddr2;
-+ int phdrs;
-+ void *kernel[4];
-+ size_t filesz[4];
-+ size_t memsz[4];
-+ size_t paddr[4];
-+ size_t vaddr[4];
- size_t entry;
-+ size_t switch_64;
- char *version;
- };
-
-@@ -137,43 +175,68 @@
- Elf32_Ehdr *ehdr;
- Elf32_Phdr *phdr;
- int i;
-- int hdr1, hdr2;
-+ int phdrs;
- ehdr = (Elf32_Ehdr *)kernel_buf;
- phdr = (Elf32_Phdr *)(kernel_buf + ehdr->e_phoff);
-- hdr1 = hdr2 = -1;
-+ phdrs = 0;
- for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
- if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
-- if (hdr2 != -1) {
-- die("Too many PT_LOAD segments to be a linux kernel\n");
-- }
-- if (hdr1 == -1) {
-- hdr1 = i;
-- } else {
-- hdr2 = i;
-- }
-- }
-- if (hdr1 == -1) {
-- die("No PT_LOAD segments!\n");
-+ info->kernel[phdrs] = kernel_buf + le32_to_cpu(phdr[i].p_offset);
-+ info->filesz[phdrs] = le32_to_cpu(phdr[i].p_filesz);
-+ info->memsz[phdrs] = le32_to_cpu(phdr[i].p_memsz);
-+ info->paddr[phdrs] = le32_to_cpu(phdr[i].p_paddr) & 0xfffffff;
-+ info->vaddr[phdrs] = le32_to_cpu(phdr[i].p_vaddr);
-+ phdrs++;
- }
-- info->kernel = kernel_buf + le32_to_cpu(phdr[hdr1].p_offset);
-- info->filesz = le32_to_cpu(phdr[hdr1].p_filesz);
-- info->memsz = le32_to_cpu(phdr[hdr1].p_memsz);
-- info->paddr = le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff;
-- info->vaddr = le32_to_cpu(phdr[hdr1].p_vaddr);
--
-- if (hdr2 != -1) {
-- info->kernel2 = kernel_buf + le32_to_cpu(phdr[hdr2].p_offset);
-- info->filesz2 = le32_to_cpu(phdr[hdr2].p_filesz);
-- info->memsz2 = le32_to_cpu(phdr[hdr2].p_memsz);
-- info->paddr2 = le32_to_cpu(phdr[hdr2].p_paddr) & 0xfffffff;
-- info->vaddr2 = le32_to_cpu(phdr[hdr2].p_vaddr);
-+
-+ if(!phdrs)
-+ die("We need at least one phdr\n");
-+
-+ info->phdrs = phdrs;
-+ info->entry = le32_to_cpu(ehdr->e_entry);
-+ info->switch_64 = 0; //not convert from elf64
-+ info->version = "unknown";
-+}
-+
-+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
-+{
-+ Elf64_Ehdr *ehdr;
-+ Elf64_Phdr *phdr;
-+ int i;
-+ int phdrs;
-+ ehdr = (Elf64_Ehdr *)kernel_buf;
-+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
-+
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ continue;
-+ info->kernel[phdrs] = kernel_buf + le64_to_cpu(phdr[i].p_offset);
-+ info->filesz[phdrs] = le64_to_cpu(phdr[i].p_filesz);
-+ info->memsz[phdrs] = le64_to_cpu(phdr[i].p_memsz);
-+ info->paddr[phdrs] = le64_to_cpu(phdr[i].p_paddr) & 0xffffff;
-+ info->vaddr[phdrs] = le64_to_cpu(phdr[i].p_vaddr);
-+ phdrs++;
- }
-+
-+ if(!phdrs)
-+ die("We need at least one phdr\n");
-
-- info->entry = 0x100000;
-- info->version = "unknown";
-+ info->phdrs = phdrs;
-+ info->entry = le64_to_cpu(ehdr->e_entry);
-+#if 0
-+ if (info->entry != info->paddr[0]) {
-+ info->entry = info->paddr[0]; // we still have startup_32 there
-+ info->switch_64 = 0; //not convert from elf64
-+ } else
-+#endif
-+ info->switch_64 = 1; //convert from elf64
-+
-+ info->version = "unknown";
- }
-
-+
- static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
- {
- struct x86_linux_header *hdr;
-@@ -186,12 +249,14 @@
- }
- offset = 512 + (512 *setup_sects);
-
-- info->kernel = kernel_buf + offset;
-- info->filesz = kernel_size - offset;
-- info->memsz = 0x700000;
-- info->paddr = 0x100000;
-- info->vaddr = 0x100000;
-- info->entry = info->paddr;
-+ info->kernel[0] = kernel_buf + offset;
-+ info->filesz[0] = kernel_size - offset;
-+ info->memsz[0] = 0x700000;
-+ info->paddr[0] = 0x100000;
-+ info->vaddr[0] = 0x100000;
-+ info->phdrs = 1;
-+ info->entry = info->paddr[0];
-+ info->switch_64 = 0; //not convert from elf64, even later bzImage become elf64, it still includes startup_32
- info->version = kernel_buf + 512 + le16_to_cpu(hdr->kver_addr);
- }
-
-@@ -237,6 +302,7 @@
- struct kernel_info kinfo;
- struct image_parameters *params;
- int index;
-+ int i;
-
- int opt;
- static const struct option options[] = {
-@@ -310,7 +376,7 @@
-
- /* Add a program header for the note section */
- index = 4;
-- index += kinfo.kernel2 ? 1:0;
-+ index += (kinfo.phdrs - 1);
- index += ramdisk_size ? 1:0;
- phdr = add_program_headers(ehdr, index);
-
-@@ -328,23 +394,24 @@
- phdr[2].p_paddr = REAL_MODE_DATA_LOC;
- phdr[2].p_vaddr = REAL_MODE_DATA_LOC;
- phdr[2].p_filesz = 0;
-- phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
-+ if(!kinfo.switch_64)
-+ phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
-+ else
-+ phdr[2].p_memsz = (PGTLOC - REAL_MODE_DATA_LOC) + params->pgt_size;
- phdr[2].p_data = 0;
-
-- phdr[3].p_paddr = kinfo.paddr;
-- phdr[3].p_vaddr = kinfo.vaddr;
-- phdr[3].p_filesz = kinfo.filesz;
-- phdr[3].p_memsz = kinfo.memsz;
-- phdr[3].p_data = kinfo.kernel;
-+ if( (phdr[1].p_paddr + phdr[1].p_memsz) > phdr[2].p_paddr) {
-+ die("Internal error: need to increase REAL_MODE_DATA_LOC !\n");
-+ }
-
-- index = 4;
-+ index = 3;
- /* Put the second kernel frament if present */
-- if (kinfo.kernel2) {
-- phdr[index].p_paddr = kinfo.paddr2;
-- phdr[index].p_vaddr = kinfo.vaddr2;
-- phdr[index].p_filesz = kinfo.filesz2;
-- phdr[index].p_memsz = kinfo.memsz2;
-- phdr[index].p_data = kinfo.kernel2;
-+ for(i=0;i<kinfo.phdrs;i++) {
-+ phdr[index].p_paddr = kinfo.paddr[i];
-+ phdr[index].p_vaddr = kinfo.vaddr[i];
-+ phdr[index].p_filesz = kinfo.filesz[i];
-+ phdr[index].p_memsz = kinfo.memsz[i];
-+ phdr[index].p_data = kinfo.kernel[i];
- index++;
- }
-
-@@ -352,6 +419,10 @@
- */
- params->initrd_start = params->initrd_size = 0;
- if (ramdisk_size) {
-+ if( (phdr[index-1].p_paddr + phdr[index-1].p_memsz) > ramdisk_base) {
-+ die("need to increase increase ramdisk_base !\n");
-+ }
-+
- phdr[index].p_paddr = ramdisk_base;
- phdr[index].p_vaddr = ramdisk_base;
- phdr[index].p_filesz = ramdisk_size;
-@@ -364,6 +435,7 @@
-
- /* Set the start location */
- params->entry = kinfo.entry;
-+ params->switch_64 = kinfo.switch_64;
- ehdr->e_entry = phdr[1].p_paddr;
-
- /* Setup the elf notes */
-diff -uNr mkelfImage-2.7/linux-ia64/mkelf-linux-ia64.c mkelfImage-2.7.new/linux-ia64/mkelf-linux-ia64.c
---- mkelfImage-2.7/linux-ia64/mkelf-linux-ia64.c 2006-03-17 10:09:16.000000000 -0800
-+++ mkelfImage-2.7.new/linux-ia64/mkelf-linux-ia64.c 2006-11-07 18:14:27.000000000 -0800
-@@ -81,7 +81,7 @@
- phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
- phdrs = 0;
- for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-- if (le16_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
- phdrs++;
- }
Deleted: buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,6640 +0,0 @@
-Index: mkelfImage-2.7/configure.ac
-===================================================================
---- mkelfImage-2.7.orig/configure.ac 2006-03-27 16:44:59.000000000 -0700
-+++ mkelfImage-2.7/configure.ac 2007-12-07 12:14:15.000000000 -0700
-@@ -173,15 +173,15 @@
- dnl ---Output variables...
-
- HOST_CC=$CC
--HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
-+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
-
- dnl TODO: figure out how to set these appropriately for compilers other than gcc
--I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
-+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
- I386_ASFLAGS=''
- I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
- dnl TODO: figure out how to set these appropriately for compilers other than gcc
--IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
-+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
- IA64_ASFLAGS='-mconstant-gp -mauto-pic'
- IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
-Index: mkelfImage-2.7/configure
-===================================================================
---- mkelfImage-2.7.orig/configure 2007-12-07 12:14:18.000000000 -0700
-+++ mkelfImage-2.7/configure 2007-12-07 12:14:21.000000000 -0700
-@@ -1,25 +1,54 @@
- #! /bin/sh
- # Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.59.
-+# Generated by GNU Autoconf 2.61.
- #
--# Copyright (C) 2003 Free Software Foundation, Inc.
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
- ## --------------------- ##
- ## M4sh Initialization. ##
- ## --------------------- ##
-
--# Be Bourne compatible
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
- # Support unset when possible.
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -29,8 +58,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -44,18 +108,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -63,157 +128,388 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
-+# CDPATH.
-+$as_unset CDPATH
-
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
-+if test "x$CONFIG_SHELL" = x; then
-+ if (eval ":") 2>/dev/null; then
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+
-+ if test $as_have_required = yes && (eval ":
-+(as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
- fi
-
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=\$LINENO
-+ as_lineno_2=\$LINENO
-+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+ :
-+else
-+ as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-+ case $as_dir in
- /*)
-- if ("$as_dir/$as_base" -c '
-+ for as_base in sh bash ksh sh5; do
-+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+ done;;
-+ esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+ for as_shell in $as_candidate_shells $SHELL; do
-+ # Try only shells that exist, to save several forks.
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+ CONFIG_SHELL=$as_shell
-+ as_have_required=yes
-+ if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+ (exit $1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+ break
-+fi
-+
-+fi
-+
-+ done
-+
-+ if test "x$CONFIG_SHELL" != x; then
-+ for as_var in BASH_ENV ENV
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+ if test $as_have_required = no; then
-+ echo This script requires a shell more modern than all the
-+ echo shells that I found on your system. Please install a
-+ echo modern shell, or manually run the script under such a
-+ echo shell if you do have one.
-+ { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+ echo No shell found that supports shell functions.
-+ echo Please tell autoconf(a)gnu.org about your system,
-+ echo including any error possibly output before this
-+ echo message
-+}
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-+ chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -222,7 +518,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -231,39 +548,27 @@
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
-
-+exec 7<&0 </dev/null 6>&1
-
- # Name of the host.
- # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
- # so uname gets run too.
- ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
--exec 6>&1
--
- #
- # Initializations.
- #
- ac_default_prefix=/usr/local
-+ac_clean_files=
- ac_config_libobj_dir=.
-+LIBOBJS=
- cross_compiling=no
- subdirs=
- MFLAGS=
- MAKEFLAGS=
- SHELL=${CONFIG_SHELL-/bin/sh}
-
--# Maximum number of lines to put in a shell here document.
--# This variable seems obsolete. It should probably be removed, and
--# only ac_max_sed_lines should be used.
--: ${ac_max_here_lines=38}
--
- # Identity of this package.
- PACKAGE_NAME=
- PACKAGE_TARNAME=
-@@ -275,42 +580,136 @@
- # Factoring default headers for most tests.
- ac_includes_default="\
- #include <stdio.h>
--#if HAVE_SYS_TYPES_H
-+#ifdef HAVE_SYS_TYPES_H
- # include <sys/types.h>
- #endif
--#if HAVE_SYS_STAT_H
-+#ifdef HAVE_SYS_STAT_H
- # include <sys/stat.h>
- #endif
--#if STDC_HEADERS
-+#ifdef STDC_HEADERS
- # include <stdlib.h>
- # include <stddef.h>
- #else
--# if HAVE_STDLIB_H
-+# ifdef HAVE_STDLIB_H
- # include <stdlib.h>
- # endif
- #endif
--#if HAVE_STRING_H
--# if !STDC_HEADERS && HAVE_MEMORY_H
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
- # include <memory.h>
- # endif
- # include <string.h>
- #endif
--#if HAVE_STRINGS_H
-+#ifdef HAVE_STRINGS_H
- # include <strings.h>
- #endif
--#if HAVE_INTTYPES_H
-+#ifdef HAVE_INTTYPES_H
- # include <inttypes.h>
--#else
--# if HAVE_STDINT_H
--# include <stdint.h>
--# endif
- #endif
--#if HAVE_UNISTD_H
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
- # include <unistd.h>
- #endif"
-
--ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT MKDIR RM CP LN TAR RPM SED FIND CPP EGREP LD ac_ct_LD AS ac_ct_AS OBJCOPY ac_ct_OBJCOPY I386_CC I386_CPP I386_LD I386_AS I386_OBJCOPY IA64_CC IA64_CPP IA64_LD IA64_AS IA64_OBJCOPY HOST_CC HOST_CFLAGS I386_CFLAGS I386_ASFLAGS I386_LDFLAGS IA64_CFLAGS IA64_ASFLAGS IA64_LDFLAGS LIBOBJS LTLIBOBJS'
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+MKDIR
-+RM
-+CP
-+LN
-+TAR
-+RPM
-+SED
-+FIND
-+CPP
-+GREP
-+EGREP
-+LD
-+AS
-+OBJCOPY
-+I386_CC
-+I386_CPP
-+I386_LD
-+I386_AS
-+I386_OBJCOPY
-+IA64_CC
-+IA64_CPP
-+IA64_LD
-+IA64_AS
-+IA64_OBJCOPY
-+HOST_CC
-+HOST_CFLAGS
-+I386_CFLAGS
-+I386_ASFLAGS
-+I386_LDFLAGS
-+IA64_CFLAGS
-+IA64_ASFLAGS
-+IA64_LDFLAGS
-+LIBOBJS
-+LTLIBOBJS'
- ac_subst_files=''
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CPP'
-+
-
- # Initialize some variables set by options.
- ac_init_help=
-@@ -337,34 +736,48 @@
- # and all the variables that are supposed to be based on exec_prefix
- # by default will actually change.
- # Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
--datadir='${prefix}/share'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
--libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
--infodir='${prefix}/info'
--mandir='${prefix}/man'
-+docdir='${datarootdir}/doc/${PACKAGE}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-
- ac_prev=
-+ac_dashdash=
- for ac_option
- do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
-- eval "$ac_prev=\$ac_option"
-+ eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
-- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-+ case $ac_option in
-+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *) ac_optarg=yes ;;
-+ esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case $ac_option in
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
-@@ -386,33 +799,45 @@
- --config-cache | -C)
- cache_file=config.cache ;;
-
-- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-+ -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
-- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-- | --da=*)
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- eval "enable_$ac_feature=no" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "enable_$ac_feature='$ac_optarg'" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -439,6 +864,12 @@
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
-+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+ ac_prev=htmldir ;;
-+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+ | --ht=*)
-+ htmldir=$ac_optarg ;;
-+
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
-@@ -463,13 +894,16 @@
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
- -localstatedir | --localstatedir | --localstatedi | --localstated \
-- | --localstate | --localstat | --localsta | --localst \
-- | --locals | --local | --loca | --loc | --lo)
-+ | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-@@ -534,6 +968,16 @@
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
-+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+ ac_prev=pdfdir ;;
-+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+ pdfdir=$ac_optarg ;;
-+
-+ -psdir | --psdir | --psdi | --psd | --ps)
-+ ac_prev=psdir ;;
-+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+ psdir=$ac_optarg ;;
-+
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-@@ -586,24 +1030,20 @@
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "with_$ac_package='$ac_optarg'" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/-/_/g'`
-- eval "with_$ac_package=no" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -634,8 +1074,7 @@
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
-- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-- eval "$ac_envvar='$ac_optarg'"
-+ eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
-@@ -655,27 +1094,19 @@
- { (exit 1); exit 1; }; }
- fi
-
--# Be sure to have absolute paths.
--for ac_var in exec_prefix prefix
--do
-- eval ac_val=$`echo $ac_var`
-- case $ac_val in
-- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-- esac
--done
--
--# Be sure to have absolute paths.
--for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-- localstatedir libdir includedir oldincludedir infodir mandir
-+# Be sure to have absolute directory names.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
- do
-- eval ac_val=$`echo $ac_var`
-+ eval ac_val=\$$ac_var
- case $ac_val in
-- [\\/$]* | ?:[\\/]* ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
-+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; }
- done
-
- # There might be people who depend on the old broken behavior: `$host'
-@@ -702,74 +1133,76 @@
- test "$silent" = yes && exec 6>/dev/null
-
-
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { (exit 1); exit 1; }; }
-+
-+
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
-- # Try the directory containing this script, then its parent.
-- ac_confdir=`(dirname "$0") 2>/dev/null ||
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$0" ||
- $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$0" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
-- if test ! -r $srcdir/$ac_unique_file; then
-+ if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
--if test ! -r $srcdir/$ac_unique_file; then
-- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-- { (exit 1); exit 1; }; }
-- else
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-- { (exit 1); exit 1; }; }
-- fi
--fi
--(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-- { (exit 1); exit 1; }; }
--srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
--ac_env_build_alias_set=${build_alias+set}
--ac_env_build_alias_value=$build_alias
--ac_cv_env_build_alias_set=${build_alias+set}
--ac_cv_env_build_alias_value=$build_alias
--ac_env_host_alias_set=${host_alias+set}
--ac_env_host_alias_value=$host_alias
--ac_cv_env_host_alias_set=${host_alias+set}
--ac_cv_env_host_alias_value=$host_alias
--ac_env_target_alias_set=${target_alias+set}
--ac_env_target_alias_value=$target_alias
--ac_cv_env_target_alias_set=${target_alias+set}
--ac_cv_env_target_alias_value=$target_alias
--ac_env_CC_set=${CC+set}
--ac_env_CC_value=$CC
--ac_cv_env_CC_set=${CC+set}
--ac_cv_env_CC_value=$CC
--ac_env_CFLAGS_set=${CFLAGS+set}
--ac_env_CFLAGS_value=$CFLAGS
--ac_cv_env_CFLAGS_set=${CFLAGS+set}
--ac_cv_env_CFLAGS_value=$CFLAGS
--ac_env_LDFLAGS_set=${LDFLAGS+set}
--ac_env_LDFLAGS_value=$LDFLAGS
--ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
--ac_cv_env_LDFLAGS_value=$LDFLAGS
--ac_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_env_CPPFLAGS_value=$CPPFLAGS
--ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_cv_env_CPPFLAGS_value=$CPPFLAGS
--ac_env_CPP_set=${CPP+set}
--ac_env_CPP_value=$CPP
--ac_cv_env_CPP_set=${CPP+set}
--ac_cv_env_CPP_value=$CPP
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+ { (exit 1); exit 1; }; }
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-
- #
- # Report the --help message.
-@@ -798,9 +1231,6 @@
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
--_ACEOF
--
-- cat <<_ACEOF
- Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
-@@ -818,15 +1248,22 @@
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
-- --infodir=DIR info documentation [PREFIX/info]
-- --mandir=DIR man documentation [PREFIX/man]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
- _ACEOF
-
- cat <<\_ACEOF
-@@ -852,126 +1289,95 @@
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
-- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-- headers in a nonstandard directory <include dir>
-+ LIBS libraries to pass to the linker, e.g. -l<library>
-+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+ you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
- Use these variables to override the choices made by `configure' or to help
- it to find libraries and programs with nonstandard names/locations.
-
- _ACEOF
-+ac_status=$?
- fi
-
- if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
-- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-- test -d $ac_dir || continue
-+ test -d "$ac_dir" || continue
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
--
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-- cd $ac_dir
-- # Check for guested configure; otherwise get Cygnus style configure.
-- if test -f $ac_srcdir/configure.gnu; then
-- echo
-- $SHELL $ac_srcdir/configure.gnu --help=recursive
-- elif test -f $ac_srcdir/configure; then
-- echo
-- $SHELL $ac_srcdir/configure --help=recursive
-- elif test -f $ac_srcdir/configure.ac ||
-- test -f $ac_srcdir/configure.in; then
-- echo
-- $ac_configure --help
-+ cd "$ac_dir" || { ac_status=$?; continue; }
-+ # Check for guested configure.
-+ if test -f "$ac_srcdir/configure.gnu"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+ elif test -f "$ac_srcdir/configure"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-- fi
-- cd $ac_popdir
-+ fi || ac_status=$?
-+ cd "$ac_pwd" || { ac_status=$?; break; }
- done
- fi
-
--test -n "$ac_init_help" && exit 0
-+test -n "$ac_init_help" && exit $ac_status
- if $ac_init_version; then
- cat <<\_ACEOF
-+configure
-+generated by GNU Autoconf 2.61
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
- This configure script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it.
- _ACEOF
-- exit 0
-+ exit
- fi
--exec 5>config.log
--cat >&5 <<_ACEOF
-+cat >config.log <<_ACEOF
- This file contains any messages produced by compilers while
- running configure, to aid debugging if configure makes a mistake.
-
- It was created by $as_me, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+generated by GNU Autoconf 2.61. Invocation command line was
-
- $ $0 $@
-
- _ACEOF
-+exec 5>>config.log
- {
- cat <<_ASUNAME
- ## --------- ##
-@@ -990,7 +1396,7 @@
- /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
- /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
- /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
--hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
- /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
- /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
- /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-@@ -1004,6 +1410,7 @@
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
- done
-+IFS=$as_save_IFS
-
- } >&5
-
-@@ -1025,7 +1432,6 @@
- ac_configure_args=
- ac_configure_args0=
- ac_configure_args1=
--ac_sep=
- ac_must_keep_next=false
- for ac_pass in 1 2
- do
-@@ -1036,7 +1442,7 @@
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
-@@ -1058,9 +1464,7 @@
- -* ) ac_must_keep_next=true ;;
- esac
- fi
-- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-- # Get rid of the leading space.
-- ac_sep=" "
-+ ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-@@ -1071,8 +1475,8 @@
- # When interrupted or exit'd, cleanup temporary files, and complete
- # config.log. We remove comments because anyway the quotes in there
- # would cause problems or look ugly.
--# WARNING: Be sure not to use single quotes in there, as some shells,
--# such as our DU 5.0 friend, will then `close' the trap.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
- trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
-@@ -1085,20 +1489,34 @@
- _ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
- (set) 2>&1 |
-- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- sed -n \
-- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-- ;;
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
- *)
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--}
-+ esac |
-+ sort
-+)
- echo
-
- cat <<\_ASBOX
-@@ -1109,22 +1527,28 @@
- echo
- for ac_var in $ac_subst_vars
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
--## ------------- ##
--## Output files. ##
--## ------------- ##
-+## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##
- _ASBOX
- echo
- for ac_var in $ac_subst_files
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-@@ -1136,26 +1560,24 @@
- ## ----------- ##
- _ASBOX
- echo
-- sed "/^$/d" confdefs.h | sort
-+ cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
-- rm -f core *.core &&
-- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-- ' 0
-+' 0
- for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
- done
- ac_signal=0
-
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo >confdefs.h
-+rm -f -r conftest* confdefs.h
-
- # Predefined preprocessor variables.
-
-@@ -1186,14 +1608,17 @@
-
- # Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
--if test -z "$CONFIG_SITE"; then
-- if test "x$prefix" != xNONE; then
-- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-- else
-- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-- fi
-+if test -n "$CONFIG_SITE"; then
-+ set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+ set x "$ac_default_prefix/share/config.site" \
-+ "$ac_default_prefix/etc/config.site"
- fi
--for ac_site_file in $CONFIG_SITE; do
-+shift
-+for ac_site_file
-+do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
- echo "$as_me: loading site script $ac_site_file" >&6;}
-@@ -1209,8 +1634,8 @@
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
- echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
-- [\\/]* | ?:[\\/]* ) . $cache_file;;
-- *) . ./$cache_file;;
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
- esac
- fi
- else
-@@ -1222,12 +1647,11 @@
- # Check that the precious variables saved in the cache have kept the same
- # value.
- ac_cache_corrupted=false
--for ac_var in `(set) 2>&1 |
-- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
-- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-- eval ac_new_val="\$ac_env_${ac_var}_value"
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-@@ -1252,8 +1676,7 @@
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
-@@ -1270,12 +1693,6 @@
- { (exit 1); exit 1; }; }
- fi
-
--ac_ext=c
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
--ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
--ac_compiler_gnu=$ac_cv_c_compiler_gnu
--
-
-
-
-@@ -1292,88 +1709,128 @@
-
-
-
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
- ac_aux_dir=
--for ac_dir in ./config $srcdir/./config; do
-- if test -f $ac_dir/install-sh; then
-+for ac_dir in ./config "$srcdir"/./config; do
-+ if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
-- elif test -f $ac_dir/install.sh; then
-+ elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-- elif test -f $ac_dir/shtool; then
-+ elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&5
--echo "$as_me: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&2;}
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&2;}
- { (exit 1); exit 1; }; }
- fi
--ac_config_guess="$SHELL $ac_aux_dir/config.guess"
--ac_config_sub="$SHELL $ac_aux_dir/config.sub"
--ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-
-
-
-
- # Make sure we can run config.sub.
--$ac_config_sub sun4 >/dev/null 2>&1 ||
-- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
--echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
--echo "$as_me:$LINENO: checking build system type" >&5
--echo $ECHO_N "checking build system type... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
- if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_build_alias=$build_alias
--test -z "$ac_cv_build_alias" &&
-- ac_cv_build_alias=`$ac_config_guess`
--test -z "$ac_cv_build_alias" &&
-+ ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
- echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
--ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_build" >&5
--echo "${ECHO_T}$ac_cv_build" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
- build=$ac_cv_build
--build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
--echo "$as_me:$LINENO: checking host system type" >&5
--echo $ECHO_N "checking host system type... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
- if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_host_alias=$host_alias
--test -z "$ac_cv_host_alias" &&
-- ac_cv_host_alias=$ac_cv_build_alias
--ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-+ if test "x$host_alias" = x; then
-+ ac_cv_host=$ac_cv_build
-+else
-+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-+fi
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_host" >&5
--echo "${ECHO_T}$ac_cv_host" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
- host=$ac_cv_host
--host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
- #AC_CANONICAL_TARGET
-@@ -1391,22 +1848,22 @@
- targets=""
-
-
--# Check whether --with-i386 or --without-i386 was given.
-+# Check whether --with-i386 was given.
- if test "${with_i386+set}" = set; then
-- withval="$with_i386"
-- if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
-+ withval=$with_i386; if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
- else
- with_i386="no"
--fi;
-+fi
-
-
--# Check whether --with-ia64 or --without-ia64 was given.
-+
-+# Check whether --with-ia64 was given.
- if test "${with_ia64+set}" = set; then
-- withval="$with_ia64"
-- if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
-+ withval=$with_ia64; if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
- else
- with_ia64="no"
--fi;
-+fi
-+
-
- with_default="no"
- if test "$with_i386" = "no" &&
-@@ -1430,8 +1887,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1444,32 +1901,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1482,36 +1941,51 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- else
- CC="$ac_cv_prog_CC"
- fi
-
- if test -z "$CC"; then
-- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1524,74 +1998,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
--else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
--fi
--
--fi
--if test -z "$ac_cv_prog_CC"; then
-- ac_ct_CC=$CC
-- # Extract the first word of "cc", so it can be a program name with args.
--set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- if test -n "$ac_ct_CC"; then
-- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
--else
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-- ac_cv_prog_ac_ct_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-- break 2
-- fi
--done
--done
--
--fi
--fi
--ac_ct_CC=$ac_cv_prog_ac_ct_CC
--if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
--else
-- CC="$ac_cv_prog_CC"
--fi
-
-+ fi
- fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1605,7 +2039,7 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
-@@ -1616,6 +2050,7 @@
- fi
- done
- done
-+IFS=$as_save_IFS
-
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
-@@ -1633,22 +2068,23 @@
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1661,36 +2097,38 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$CC" && break
- done
- fi
- if test -z "$CC"; then
- ac_ct_CC=$CC
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1703,29 +2141,45 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$ac_ct_CC" && break
- done
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- fi
-
- fi
-@@ -1738,21 +2192,35 @@
- { (exit 1); exit 1; }; }
-
- # Provide some information about the compiler.
--echo "$as_me:$LINENO:" \
-- "checking for C compiler version" >&5
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
- ac_compiler=`set X $ac_compile; echo $2`
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-- (eval $ac_compiler --version </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-- (eval $ac_compiler -v </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-- (eval $ac_compiler -V </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-@@ -1777,47 +2245,77 @@
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
- ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
--if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-- (eval $ac_link_default) 2>&5
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort. b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions. Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- # Find the output, starting from the most likely. This scheme is
--# not robust to junk in `.', hence go to wildcards (a.*) only as a last
--# resort.
--
--# Be careful to initialize this variable, since it used to be cached.
--# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
--ac_cv_exeext=
--# b.out is created by i960 compilers.
--for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
- do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-- ;;
-- conftest.$ac_ext )
-- # This is the source file.
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
-- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- # FIXME: I believe we export ac_cv_exeext for Libtool,
-- # but it would be cool to find out if it's true. Does anybody
-- # maintain Libtool? --akim.
-- export ac_cv_exeext
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
- break;;
- * )
- break;;
- esac
- done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
- else
-+ ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-@@ -1829,19 +2327,21 @@
- fi
-
- ac_exeext=$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_file" >&5
--echo "${ECHO_T}$ac_file" >&6
-
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
- # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
- # If not cross compiling, check that we can run a simple program.
- if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-@@ -1860,22 +2360,27 @@
- fi
- fi
- fi
--echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-
- rm -f a.out a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
--echo "$as_me:$LINENO: result: $cross_compiling" >&5
--echo "${ECHO_T}$cross_compiling" >&6
--
--echo "$as_me:$LINENO: checking for suffix of executables" >&5
--echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-@@ -1886,9 +2391,8 @@
- for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-@@ -1902,14 +2406,14 @@
- fi
-
- rm -f conftest$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
--echo "${ECHO_T}$ac_cv_exeext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--echo "$as_me:$LINENO: checking for suffix of object files" >&5
--echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
- if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1929,14 +2433,20 @@
- }
- _ACEOF
- rm -f conftest.o conftest.obj
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>&5
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-@@ -1954,12 +2464,12 @@
-
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
--echo "${ECHO_T}$ac_cv_objext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
--echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1982,50 +2492,49 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_compiler_gnu=no
-+ ac_compiler_gnu=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
--echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
- GCC=`test $ac_compiler_gnu = yes && echo yes`
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--CFLAGS="-g"
--echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
--echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
- cat confdefs.h >>conftest.$ac_ext
-@@ -2041,38 +2550,118 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_prog_cc_g=no
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-@@ -2088,12 +2677,12 @@
- CFLAGS=
- fi
- fi
--echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
--echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
--if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_prog_cc_stdc=no
-+ ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2127,12 +2716,17 @@
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
-- as 'x'. The following induces an error, until -std1 is added to get
-+ as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
-- that's true only with -std1. */
-+ that's true only with -std. */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
-@@ -2147,205 +2741,57 @@
- return 0;
- }
- _ACEOF
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX 10.20 and later -Ae
--# HP-UX older versions -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_prog_cc_stdc=$ac_arg
--break
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_c89=$ac_arg
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-+
- fi
--rm -f conftest.err conftest.$ac_objext
-+
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
--rm -f conftest.$ac_ext conftest.$ac_objext
-+rm -f conftest.$ac_ext
- CC=$ac_save_CC
-
- fi
--
--case "x$ac_cv_prog_cc_stdc" in
-- x|xno)
-- echo "$as_me:$LINENO: result: none needed" >&5
--echo "${ECHO_T}none needed" >&6 ;;
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+ xno)
-+ { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
- *)
-- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-- CC="$CC $ac_cv_prog_cc_stdc" ;;
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-
--# Some people use a C++ compiler to compile C. Since we use `exit',
--# in C++ we need to declare it. In case someone uses the same compiler
--# for both compiling C and C++ we need to have the C++ compiler decide
--# the declaration of exit, since it's the most demanding environment.
--cat >conftest.$ac_ext <<_ACEOF
--#ifndef __cplusplus
-- choke me
--#endif
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- for ac_declaration in \
-- '' \
-- 'extern "C" void std::exit (int) throw (); using std::exit;' \
-- 'extern "C" void std::exit (int); using std::exit;' \
-- 'extern "C" void exit (int) throw ();' \
-- 'extern "C" void exit (int);' \
-- 'void exit (int);'
--do
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--#include <stdlib.h>
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-
--continue
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--done
--rm -f conftest*
--if test -n "$ac_declaration"; then
-- echo '#ifdef __cplusplus' >>confdefs.h
-- echo $ac_declaration >>confdefs.h
-- echo '#endif' >>confdefs.h
--fi
--
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -2356,8 +2802,8 @@
-
- # Extract the first word of "mkdir", so it can be a program name with args.
- set dummy mkdir; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_MKDIR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2370,29 +2816,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MKDIR="mkdir"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- MKDIR=$ac_cv_prog_MKDIR
- if test -n "$MKDIR"; then
-- echo "$as_me:$LINENO: result: $MKDIR" >&5
--echo "${ECHO_T}$MKDIR" >&6
-+ { echo "$as_me:$LINENO: result: $MKDIR" >&5
-+echo "${ECHO_T}$MKDIR" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "rm", so it can be a program name with args.
- set dummy rm; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_RM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2405,29 +2853,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RM="rm"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- RM=$ac_cv_prog_RM
- if test -n "$RM"; then
-- echo "$as_me:$LINENO: result: $RM" >&5
--echo "${ECHO_T}$RM" >&6
-+ { echo "$as_me:$LINENO: result: $RM" >&5
-+echo "${ECHO_T}$RM" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "cp", so it can be a program name with args.
- set dummy cp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2440,29 +2890,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CP="cp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CP=$ac_cv_prog_CP
- if test -n "$CP"; then
-- echo "$as_me:$LINENO: result: $CP" >&5
--echo "${ECHO_T}$CP" >&6
-+ { echo "$as_me:$LINENO: result: $CP" >&5
-+echo "${ECHO_T}$CP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "ln", so it can be a program name with args.
- set dummy ln; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_LN+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2475,29 +2927,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LN="ln"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- LN=$ac_cv_prog_LN
- if test -n "$LN"; then
-- echo "$as_me:$LINENO: result: $LN" >&5
--echo "${ECHO_T}$LN" >&6
-+ { echo "$as_me:$LINENO: result: $LN" >&5
-+echo "${ECHO_T}$LN" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "tar", so it can be a program name with args.
- set dummy tar; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_TAR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2510,29 +2964,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_TAR="tar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- TAR=$ac_cv_prog_TAR
- if test -n "$TAR"; then
-- echo "$as_me:$LINENO: result: $TAR" >&5
--echo "${ECHO_T}$TAR" >&6
-+ { echo "$as_me:$LINENO: result: $TAR" >&5
-+echo "${ECHO_T}$TAR" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "rpm", so it can be a program name with args.
- set dummy rpm; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_RPM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2545,29 +3001,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RPM="rpm"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- RPM=$ac_cv_prog_RPM
- if test -n "$RPM"; then
-- echo "$as_me:$LINENO: result: $RPM" >&5
--echo "${ECHO_T}$RPM" >&6
-+ { echo "$as_me:$LINENO: result: $RPM" >&5
-+echo "${ECHO_T}$RPM" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "sed", so it can be a program name with args.
- set dummy sed; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_SED+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2580,29 +3038,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_SED="sed"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- SED=$ac_cv_prog_SED
- if test -n "$SED"; then
-- echo "$as_me:$LINENO: result: $SED" >&5
--echo "${ECHO_T}$SED" >&6
-+ { echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "find", so it can be a program name with args.
- set dummy find; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_FIND+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2615,33 +3075,35 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_FIND="find"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- FIND=$ac_cv_prog_FIND
- if test -n "$FIND"; then
-- echo "$as_me:$LINENO: result: $FIND" >&5
--echo "${ECHO_T}$FIND" >&6
-+ { echo "$as_me:$LINENO: result: $FIND" >&5
-+echo "${ECHO_T}$FIND" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-
-+
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
--echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-@@ -2675,24 +3137,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -2701,9 +3161,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2713,24 +3174,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -2741,6 +3200,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -2758,8 +3218,8 @@
- else
- ac_cv_prog_CPP=$CPP
- fi
--echo "$as_me:$LINENO: result: $CPP" >&5
--echo "${ECHO_T}$CPP" >&6
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-@@ -2782,24 +3242,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -2808,9 +3266,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2820,24 +3279,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -2848,6 +3305,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -2870,23 +3328,170 @@
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
--echo "$as_me:$LINENO: checking for egrep" >&5
--echo $ECHO_N "checking for egrep... $ECHO_C" >&6
--if test "${ac_cv_prog_egrep+set}" = set; then
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-+ ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in grep ggrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+ # Check for GNU ac_path_GREP and select it if it is found.
-+ # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'GREP' >> "conftest.nl"
-+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_GREP="$ac_path_GREP"
-+ ac_path_GREP_max=$ac_count
- fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_GREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
--echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-- EGREP=$ac_cv_prog_egrep
-
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+ then ac_cv_path_EGREP="$GREP -E"
-+ else
-+ # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in egrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+ # Check for GNU ac_path_EGREP and select it if it is found.
-+ # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'EGREP' >> "conftest.nl"
-+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_EGREP="$ac_path_EGREP"
-+ ac_path_EGREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_EGREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_EGREP=$EGREP
-+fi
-
--echo "$as_me:$LINENO: checking for ANSI C header files" >&5
--echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
- if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2910,35 +3515,31 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_header_stdc=no
-+ ac_cv_header_stdc=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-@@ -2994,6 +3595,7 @@
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h. */
- #include <ctype.h>
-+#include <stdlib.h>
- #if ((' ' & 0x0FF) == 0x020)
- # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-@@ -3013,18 +3615,27 @@
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
-- exit(2);
-- exit (0);
-+ return 2;
-+ return 0;
- }
- _ACEOF
- rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-@@ -3037,12 +3648,14 @@
- ( exit $ac_status )
- ac_cv_header_stdc=no
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
-+
-+
- fi
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
--echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
-
- cat >>confdefs.h <<\_ACEOF
-@@ -3065,9 +3678,9 @@
- inttypes.h stdint.h unistd.h
- do
- as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $ac_header" >&5
--echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- cat >conftest.$ac_ext <<_ACEOF
-@@ -3081,38 +3694,35 @@
- #include <$ac_header>
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--eval "$as_ac_Header=no"
-+ eval "$as_ac_Header=no"
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
- if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
- #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-@@ -3124,17 +3734,17 @@
-
-
- if test "${ac_cv_header_zlib_h+set}" = set; then
-- echo "$as_me:$LINENO: checking for zlib.h" >&5
--echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
-+ { echo "$as_me:$LINENO: checking for zlib.h" >&5
-+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
- if test "${ac_cv_header_zlib_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
--echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
- else
- # Is the header compilable?
--echo "$as_me:$LINENO: checking zlib.h usability" >&5
--echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking zlib.h usability" >&5
-+echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; }
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
-@@ -3145,41 +3755,37 @@
- #include <zlib.h>
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_header_compiler=no
-+ ac_header_compiler=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
--echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-
- # Is the header present?
--echo "$as_me:$LINENO: checking zlib.h presence" >&5
--echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking zlib.h presence" >&5
-+echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; }
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
-@@ -3188,24 +3794,22 @@
- /* end confdefs.h. */
- #include <zlib.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- ac_header_preproc=yes
- else
- echo "$as_me: failed program was:" >&5
-@@ -3213,9 +3817,10 @@
-
- ac_header_preproc=no
- fi
-+
- rm -f conftest.err conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
--echo "${ECHO_T}$ac_header_preproc" >&6
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-
- # So? What about this header?
- case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-@@ -3239,30 +3844,23 @@
- echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5
- echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;}
-- (
-- cat <<\_ASBOX
--## ------------------------------------------ ##
--## Report this to the AC_PACKAGE_NAME lists. ##
--## ------------------------------------------ ##
--_ASBOX
-- ) |
-- sed "s/^/$as_me: WARNING: /" >&2
-+
- ;;
- esac
--echo "$as_me:$LINENO: checking for zlib.h" >&5
--echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for zlib.h" >&5
-+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
- if test "${ac_cv_header_zlib_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- ac_cv_header_zlib_h=$ac_header_preproc
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
--echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
-
- fi
- if test $ac_cv_header_zlib_h = yes; then
-- echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
--echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6
-+ { echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
-+echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6; }
- if test "${ac_cv_lib_z_inflateInit_+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3276,56 +3874,53 @@
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char inflateInit_ ();
- int
- main ()
- {
--inflateInit_ ();
-+return inflateInit_ ();
- ;
- return 0;
- }
- _ACEOF
- rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
- ac_cv_lib_z_inflateInit_=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_lib_z_inflateInit_=no
-+ ac_cv_lib_z_inflateInit_=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
--echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
-+echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6; }
- if test $ac_cv_lib_z_inflateInit_ = yes; then
- cat >>confdefs.h <<\_ACEOF
- #define HAVE_ZLIB_H 1
-@@ -3349,8 +3944,8 @@
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
--echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-@@ -3384,24 +3979,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -3410,9 +4003,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -3422,24 +4016,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -3450,6 +4042,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -3467,8 +4060,8 @@
- else
- ac_cv_prog_CPP=$CPP
- fi
--echo "$as_me:$LINENO: result: $CPP" >&5
--echo "${ECHO_T}$CPP" >&6
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-@@ -3491,24 +4084,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -3517,9 +4108,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -3529,24 +4121,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -3557,6 +4147,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -3587,8 +4178,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
- set dummy ${ac_tool_prefix}ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3601,32 +4192,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LD="${ac_tool_prefix}ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- LD=$ac_cv_prog_LD
- if test -n "$LD"; then
-- echo "$as_me:$LINENO: result: $LD" >&5
--echo "${ECHO_T}$LD" >&6
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_LD"; then
- ac_ct_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
- set dummy ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3639,27 +4232,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_LD="ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="no"
- fi
- fi
- ac_ct_LD=$ac_cv_prog_ac_ct_LD
- if test -n "$ac_ct_LD"; then
-- echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
--echo "${ECHO_T}$ac_ct_LD" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
-+echo "${ECHO_T}$ac_ct_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- LD=$ac_ct_LD
-+ if test "x$ac_ct_LD" = x; then
-+ LD="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ LD=$ac_ct_LD
-+ fi
- else
- LD="$ac_cv_prog_LD"
- fi
-@@ -3673,8 +4280,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
- set dummy ${ac_tool_prefix}as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3687,32 +4294,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- AS=$ac_cv_prog_AS
- if test -n "$AS"; then
-- echo "$as_me:$LINENO: result: $AS" >&5
--echo "${ECHO_T}$AS" >&6
-+ { echo "$as_me:$LINENO: result: $AS" >&5
-+echo "${ECHO_T}$AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_AS"; then
- ac_ct_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
- set dummy as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3725,27 +4334,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AS="as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="no"
- fi
- fi
- ac_ct_AS=$ac_cv_prog_ac_ct_AS
- if test -n "$ac_ct_AS"; then
-- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
--echo "${ECHO_T}$ac_ct_AS" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-+echo "${ECHO_T}$ac_ct_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- AS=$ac_ct_AS
-+ if test "x$ac_ct_AS" = x; then
-+ AS="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AS=$ac_ct_AS
-+ fi
- else
- AS="$ac_cv_prog_AS"
- fi
-@@ -3759,8 +4382,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args.
- set dummy ${ac_tool_prefix}objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3773,32 +4396,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- OBJCOPY=$ac_cv_prog_OBJCOPY
- if test -n "$OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
--echo "${ECHO_T}$OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-+echo "${ECHO_T}$OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_OBJCOPY"; then
- ac_ct_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
- set dummy objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3811,27 +4436,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_OBJCOPY="objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_OBJCOPY" && ac_cv_prog_ac_ct_OBJCOPY="no"
- fi
- fi
- ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
- if test -n "$ac_ct_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
--echo "${ECHO_T}$ac_ct_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
-+echo "${ECHO_T}$ac_ct_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- OBJCOPY=$ac_ct_OBJCOPY
-+ if test "x$ac_ct_OBJCOPY" = x; then
-+ OBJCOPY="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ OBJCOPY=$ac_ct_OBJCOPY
-+ fi
- else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
- fi
-@@ -3862,8 +4501,8 @@
- fi
- # Extract the first word of "$cc", so it can be a program name with args.
- set dummy $cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3876,26 +4515,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_CC="$cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_CC" && ac_cv_prog_I386_CC=""""
- fi
- fi
- I386_CC=$ac_cv_prog_I386_CC
- if test -n "$I386_CC"; then
-- echo "$as_me:$LINENO: result: $I386_CC" >&5
--echo "${ECHO_T}$I386_CC" >&6
-+ { echo "$as_me:$LINENO: result: $I386_CC" >&5
-+echo "${ECHO_T}$I386_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_CC" = no; then
-
- { { echo "$as_me:$LINENO: error: $cc not found" >&5
-@@ -3904,8 +4545,8 @@
- fi
- # Extract the first word of "$cpp", so it can be a program name with args.
- set dummy $cpp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3918,26 +4559,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_CPP="$cpp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_CPP" && ac_cv_prog_I386_CPP=""""
- fi
- fi
- I386_CPP=$ac_cv_prog_I386_CPP
- if test -n "$I386_CPP"; then
-- echo "$as_me:$LINENO: result: $I386_CPP" >&5
--echo "${ECHO_T}$I386_CPP" >&6
-+ { echo "$as_me:$LINENO: result: $I386_CPP" >&5
-+echo "${ECHO_T}$I386_CPP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_CPP" = no; then
- { { echo "$as_me:$LINENO: error: $cpp not found" >&5
- echo "$as_me: error: $cpp not found" >&2;}
-@@ -3945,8 +4588,8 @@
- fi
- # Extract the first word of "$ld", so it can be a program name with args.
- set dummy $ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3959,26 +4602,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_LD="$ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_LD" && ac_cv_prog_I386_LD=""""
- fi
- fi
- I386_LD=$ac_cv_prog_I386_LD
- if test -n "$I386_LD"; then
-- echo "$as_me:$LINENO: result: $I386_LD" >&5
--echo "${ECHO_T}$I386_LD" >&6
-+ { echo "$as_me:$LINENO: result: $I386_LD" >&5
-+echo "${ECHO_T}$I386_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_AS" = no; then
- { { echo "$as_me:$LINENO: error: $ld not found" >&5
- echo "$as_me: error: $ld not found" >&2;}
-@@ -3986,8 +4631,8 @@
- fi
- # Extract the first word of "$as", so it can be a program name with args.
- set dummy $as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4000,26 +4645,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_AS="$as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_AS" && ac_cv_prog_I386_AS=""""
- fi
- fi
- I386_AS=$ac_cv_prog_I386_AS
- if test -n "$I386_AS"; then
-- echo "$as_me:$LINENO: result: $I386_AS" >&5
--echo "${ECHO_T}$I386_AS" >&6
-+ { echo "$as_me:$LINENO: result: $I386_AS" >&5
-+echo "${ECHO_T}$I386_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_AS" = no; then
- { { echo "$as_me:$LINENO: error: $as not found" >&5
- echo "$as_me: error: $as not found" >&2;}
-@@ -4027,8 +4674,8 @@
- fi
- # Extract the first word of "$objcopy", so it can be a program name with args.
- set dummy $objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4041,26 +4688,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_OBJCOPY="$objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_OBJCOPY" && ac_cv_prog_I386_OBJCOPY=""""
- fi
- fi
- I386_OBJCOPY=$ac_cv_prog_I386_OBJCOPY
- if test -n "$I386_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
--echo "${ECHO_T}$I386_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
-+echo "${ECHO_T}$I386_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_OBJCOPY" = no; then
- { { echo "$as_me:$LINENO: error: $objcopy not found" >&5
- echo "$as_me: error: $objcopy not found" >&2;}
-@@ -4083,8 +4732,8 @@
- fi
- # Extract the first word of "$cc", so it can be a program name with args.
- set dummy $cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4097,26 +4746,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_CC="$cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_CC" && ac_cv_prog_IA64_CC=""""
- fi
- fi
- IA64_CC=$ac_cv_prog_IA64_CC
- if test -n "$IA64_CC"; then
-- echo "$as_me:$LINENO: result: $IA64_CC" >&5
--echo "${ECHO_T}$IA64_CC" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_CC" >&5
-+echo "${ECHO_T}$IA64_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_CC" = no; then
-
- { { echo "$as_me:$LINENO: error: $cc not found" >&5
-@@ -4125,8 +4776,8 @@
- fi
- # Extract the first word of "$cpp", so it can be a program name with args.
- set dummy $cpp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4139,26 +4790,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_CPP="$cpp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_CPP" && ac_cv_prog_IA64_CPP=""""
- fi
- fi
- IA64_CPP=$ac_cv_prog_IA64_CPP
- if test -n "$IA64_CPP"; then
-- echo "$as_me:$LINENO: result: $IA64_CPP" >&5
--echo "${ECHO_T}$IA64_CPP" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_CPP" >&5
-+echo "${ECHO_T}$IA64_CPP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_CPP" = no; then
- { { echo "$as_me:$LINENO: error: $cpp not found" >&5
- echo "$as_me: error: $cpp not found" >&2;}
-@@ -4166,8 +4819,8 @@
- fi
- # Extract the first word of "$ld", so it can be a program name with args.
- set dummy $ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4180,26 +4833,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_LD="$ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_LD" && ac_cv_prog_IA64_LD=""""
- fi
- fi
- IA64_LD=$ac_cv_prog_IA64_LD
- if test -n "$IA64_LD"; then
-- echo "$as_me:$LINENO: result: $IA64_LD" >&5
--echo "${ECHO_T}$IA64_LD" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_LD" >&5
-+echo "${ECHO_T}$IA64_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_AS" = no; then
- { { echo "$as_me:$LINENO: error: $ld not found" >&5
- echo "$as_me: error: $ld not found" >&2;}
-@@ -4207,8 +4862,8 @@
- fi
- # Extract the first word of "$as", so it can be a program name with args.
- set dummy $as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4221,26 +4876,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_AS="$as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_AS" && ac_cv_prog_IA64_AS=""""
- fi
- fi
- IA64_AS=$ac_cv_prog_IA64_AS
- if test -n "$IA64_AS"; then
-- echo "$as_me:$LINENO: result: $IA64_AS" >&5
--echo "${ECHO_T}$IA64_AS" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_AS" >&5
-+echo "${ECHO_T}$IA64_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_AS" = no; then
- { { echo "$as_me:$LINENO: error: $as not found" >&5
- echo "$as_me: error: $as not found" >&2;}
-@@ -4248,8 +4905,8 @@
- fi
- # Extract the first word of "$objcopy", so it can be a program name with args.
- set dummy $objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4262,26 +4919,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_OBJCOPY="$objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_OBJCOPY" && ac_cv_prog_IA64_OBJCOPY=""""
- fi
- fi
- IA64_OBJCOPY=$ac_cv_prog_IA64_OBJCOPY
- if test -n "$IA64_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
--echo "${ECHO_T}$IA64_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
-+echo "${ECHO_T}$IA64_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_OBJCOPY" = no; then
- { { echo "$as_me:$LINENO: error: $objcopy not found" >&5
- echo "$as_me: error: $objcopy not found" >&2;}
-@@ -4292,13 +4951,13 @@
-
-
- HOST_CC=$CC
--HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
-+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
-
--I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
-+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
- I386_ASFLAGS=''
- I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
--IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
-+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
- IA64_ASFLAGS='-mconstant-gp -mauto-pic'
- IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
-@@ -4323,7 +4982,8 @@
-
-
-
-- ac_config_files="$ac_config_files Makefile.conf"
-+ac_config_files="$ac_config_files Makefile.conf"
-+
- cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
-@@ -4342,39 +5002,58 @@
-
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
-+# So, we kill variables containing newlines.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+
- (set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-- ;;
-+ ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--} |
-+ esac |
-+ sort
-+) |
- sed '
-+ /^ac_cv_env_/b end
- t clear
-- : clear
-+ :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
-- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-- : end' >>confcache
--if diff $cache_file confcache >/dev/null 2>&1; then :; else
-- if test -w $cache_file; then
-- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
-- echo "not updating unwritable cache $cache_file"
-+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
- fi
- rm -f confcache
-@@ -4383,63 +5062,48 @@
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# VPATH may cause trouble with some makes, so we remove $(srcdir),
--# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
--# trailing colons and then remove the whole line if VPATH becomes empty
--# (actually we leave an empty line to preserve line numbers).
--if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=/{
--s/:*\$(srcdir):*/:/;
--s/:*\${srcdir}:*/:/;
--s/:*@srcdir@:*/:/;
--s/^\([^=]*=[ ]*\):*/\1/;
--s/:*$//;
--s/^[^=]*=[ ]*$//;
--}'
--fi
--
- # Transform confdefs.h into DEFS.
- # Protect against shell expansion while executing Makefile rules.
- # Protect against Makefile macro expansion.
- #
- # If the first sed substitution is executed (which looks for macros that
--# take arguments), then we branch to the quote section. Otherwise,
-+# take arguments), then branch to the quote section. Otherwise,
- # look for a macro that doesn't take arguments.
--cat >confdef2opt.sed <<\_ACEOF
-+ac_script='
- t clear
--: clear
--s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--d
--: quote
--s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
--s,\[,\\&,g
--s,\],\\&,g
--s,\$,$$,g
--p
--_ACEOF
--# We use echo to avoid assuming a particular line-breaking character.
--# The extra dot is to prevent the shell from consuming trailing
--# line-breaks from the sub-command output. A line-break within
--# single-quotes doesn't work because, if this script is created in a
--# platform that uses two characters for line-breaks (e.g., DOS), tr
--# would break.
--ac_LF_and_DOT=`echo; echo .`
--DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
--rm -f confdef2opt.sed
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-
-
- ac_libobjs=
- ac_ltlibobjs=
- for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
-- ac_i=`echo "$ac_i" |
-- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-- # 2. Add them.
-- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
- done
- LIBOBJS=$ac_libobjs
-
-@@ -4470,17 +5134,45 @@
- ## M4sh Initialization. ##
- ## --------------------- ##
-
--# Be Bourne compatible
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
- # Support unset when possible.
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -4490,8 +5182,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -4505,18 +5232,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -4524,159 +5252,120 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
--
--
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
--fi
-+# CDPATH.
-+$as_unset CDPATH
-
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
--echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-- /*)
-- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
--echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -4685,7 +5374,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -4694,31 +5404,14 @@
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
--
- exec 6>&1
-
--# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# Save the log message, to keep $[0] and so on meaningful, and to
- # report actual input values of CONFIG_FILES etc. instead of their
--# values after options handling. Logging --version etc. is OK.
--exec 5>>config.log
--{
-- echo
-- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
--## Running $as_me. ##
--_ASBOX
--} >&5
--cat >&5 <<_CSEOF
--
-+# values after options handling.
-+ac_log="
- This file was extended by $as_me, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+generated by GNU Autoconf 2.61. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
-@@ -4726,30 +5419,18 @@
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
--_CSEOF
--echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
--echo >&5
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
- _ACEOF
-
-+cat >>$CONFIG_STATUS <<_ACEOF
- # Files that config.status was made for.
--if test -n "$ac_config_files"; then
-- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_headers"; then
-- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
--fi
-+config_files="$ac_config_files"
-
--if test -n "$ac_config_links"; then
-- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_commands"; then
-- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
--fi
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
--
- ac_cs_usage="\
- \`$as_me' instantiates files from templates according to the
- current configuration.
-@@ -4757,7 +5438,7 @@
- Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
-- -V, --version print version number, then exit
-+ -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
-@@ -4768,18 +5449,20 @@
- $config_files
-
- Report bugs to <bug-autoconf(a)gnu.org>."
--_ACEOF
-
-+_ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- ac_cs_version="\\
- config.status
--configured by $0, generated by GNU Autoconf 2.59,
-- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+configured by $0, generated by GNU Autoconf 2.61,
-+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 2006 Free Software Foundation, Inc.
- This config.status script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it."
--srcdir=$srcdir
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
- _ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
-@@ -4790,60 +5473,42 @@
- do
- case $1 in
- --*=*)
-- ac_option=`expr "x$1" : 'x\([^=]*\)='`
-- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
-- -*)
-+ *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
-- *) # This is not an option, so the user has probably given explicit
-- # arguments.
-- ac_option=$1
-- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
-- --version | --vers* | -V )
-- echo "$ac_cs_version"; exit 0 ;;
-- --he | --h)
-- # Conflict between --help and --header
-- { { echo "$as_me:$LINENO: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&2;}
-- { (exit 1); exit 1; }; };;
-- --help | --hel | -h )
-- echo "$ac_cs_usage"; exit 0 ;;
-- --debug | --d* | -d )
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ echo "$ac_cs_version"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
-- --header | --heade | --head | --hea )
-- $ac_shift
-- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-- ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
-- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&2;}
-+ -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
-- *) ac_config_targets="$ac_config_targets $1" ;;
-+ *) ac_config_targets="$ac_config_targets $1"
-+ ac_need_defaults=false ;;
-
- esac
- shift
-@@ -4859,28 +5524,42 @@
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- if \$ac_cs_recheck; then
-- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ CONFIG_SHELL=$SHELL
-+ export CONFIG_SHELL
-+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- fi
-
- _ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+ echo "$ac_log"
-+} >&5
-
--
--
--
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
- for ac_config_target in $ac_config_targets
- do
-- case "$ac_config_target" in
-- # Handling of arguments.
-- "Makefile.conf" ) CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
-+ case $ac_config_target in
-+ "Makefile.conf") CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
-+
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
- echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- done
-
-+
- # If the user did not use the arguments to specify the items to instantiate,
- # then the envvar interface is used. Set only those that are not.
- # We use the long form for the default assignment because of an extremely
-@@ -4890,360 +5569,436 @@
- fi
-
- # Have a temporary directory for convenience. Make it in the build tree
--# simply because there is no reason to put it here, and in addition,
-+# simply because there is no reason against having it here, and in addition,
- # creating and moving files from /tmp can sometimes cause problems.
--# Create a temporary directory, and hook for its removal unless debugging.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
- $debug ||
- {
-- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
- }
--
- # Create a (secure) tmp directory for tmp files.
-
- {
-- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
- } ||
- {
-- tmp=./confstat$$-$RANDOM
-- (umask 077 && mkdir $tmp)
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
- } ||
- {
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
- }
-
--_ACEOF
--
--cat >>$CONFIG_STATUS <<_ACEOF
--
- #
--# CONFIG_FILES section.
-+# Set up the sed scripts for CONFIG_FILES section.
- #
-
- # No need to generate the scripts if there are no CONFIG_FILES.
- # This happens for instance when ./config.status config.h
--if test -n "\$CONFIG_FILES"; then
-- # Protect against being on the right side of a sed subst in config.status.
-- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
--s,@SHELL@,$SHELL,;t t
--s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
--s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
--s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
--s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
--s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
--s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
--s,@exec_prefix@,$exec_prefix,;t t
--s,@prefix@,$prefix,;t t
--s,@program_transform_name@,$program_transform_name,;t t
--s,@bindir@,$bindir,;t t
--s,@sbindir@,$sbindir,;t t
--s,@libexecdir@,$libexecdir,;t t
--s,@datadir@,$datadir,;t t
--s,@sysconfdir@,$sysconfdir,;t t
--s,@sharedstatedir@,$sharedstatedir,;t t
--s,@localstatedir@,$localstatedir,;t t
--s,@libdir@,$libdir,;t t
--s,@includedir@,$includedir,;t t
--s,@oldincludedir@,$oldincludedir,;t t
--s,@infodir@,$infodir,;t t
--s,@mandir@,$mandir,;t t
--s,@build_alias@,$build_alias,;t t
--s,@host_alias@,$host_alias,;t t
--s,@target_alias@,$target_alias,;t t
--s,@DEFS@,$DEFS,;t t
--s,@ECHO_C@,$ECHO_C,;t t
--s,@ECHO_N@,$ECHO_N,;t t
--s,@ECHO_T@,$ECHO_T,;t t
--s,@LIBS@,$LIBS,;t t
--s,@build@,$build,;t t
--s,@build_cpu@,$build_cpu,;t t
--s,@build_vendor@,$build_vendor,;t t
--s,@build_os@,$build_os,;t t
--s,@host@,$host,;t t
--s,@host_cpu@,$host_cpu,;t t
--s,@host_vendor@,$host_vendor,;t t
--s,@host_os@,$host_os,;t t
--s,@CC@,$CC,;t t
--s,@CFLAGS@,$CFLAGS,;t t
--s,@LDFLAGS@,$LDFLAGS,;t t
--s,@CPPFLAGS@,$CPPFLAGS,;t t
--s,@ac_ct_CC@,$ac_ct_CC,;t t
--s,@EXEEXT@,$EXEEXT,;t t
--s,@OBJEXT@,$OBJEXT,;t t
--s,@MKDIR@,$MKDIR,;t t
--s,@RM@,$RM,;t t
--s,@CP@,$CP,;t t
--s,@LN@,$LN,;t t
--s,@TAR@,$TAR,;t t
--s,@RPM@,$RPM,;t t
--s,@SED@,$SED,;t t
--s,@FIND@,$FIND,;t t
--s,@CPP@,$CPP,;t t
--s,@EGREP@,$EGREP,;t t
--s,@LD@,$LD,;t t
--s,@ac_ct_LD@,$ac_ct_LD,;t t
--s,@AS@,$AS,;t t
--s,@ac_ct_AS@,$ac_ct_AS,;t t
--s,@OBJCOPY@,$OBJCOPY,;t t
--s,@ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t
--s,@I386_CC@,$I386_CC,;t t
--s,@I386_CPP@,$I386_CPP,;t t
--s,@I386_LD@,$I386_LD,;t t
--s,@I386_AS@,$I386_AS,;t t
--s,@I386_OBJCOPY@,$I386_OBJCOPY,;t t
--s,@IA64_CC@,$IA64_CC,;t t
--s,@IA64_CPP@,$IA64_CPP,;t t
--s,@IA64_LD@,$IA64_LD,;t t
--s,@IA64_AS@,$IA64_AS,;t t
--s,@IA64_OBJCOPY@,$IA64_OBJCOPY,;t t
--s,@HOST_CC@,$HOST_CC,;t t
--s,@HOST_CFLAGS@,$HOST_CFLAGS,;t t
--s,@I386_CFLAGS@,$I386_CFLAGS,;t t
--s,@I386_ASFLAGS@,$I386_ASFLAGS,;t t
--s,@I386_LDFLAGS@,$I386_LDFLAGS,;t t
--s,@IA64_CFLAGS@,$IA64_CFLAGS,;t t
--s,@IA64_ASFLAGS@,$IA64_ASFLAGS,;t t
--s,@IA64_LDFLAGS@,$IA64_LDFLAGS,;t t
--s,@LIBOBJS@,$LIBOBJS,;t t
--s,@LTLIBOBJS@,$LTLIBOBJS,;t t
--CEOF
--
--_ACEOF
--
-- cat >>$CONFIG_STATUS <<\_ACEOF
-- # Split the substitutions into bite-sized pieces for seds with
-- # small command number limits, like on Digital OSF/1 and HP-UX.
-- ac_max_sed_lines=48
-- ac_sed_frag=1 # Number of current file.
-- ac_beg=1 # First line for current file.
-- ac_end=$ac_max_sed_lines # Line after last line for current file.
-- ac_more_lines=:
-- ac_sed_cmds=
-- while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- else
-- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- fi
-- if test ! -s $tmp/subs.frag; then
-- ac_more_lines=false
-- else
-- # The purpose of the label and of the branching condition is to
-- # speed up the sed processing (if there are no `@' at all, there
-- # is no need to browse any of the substitutions).
-- # These are the two extra sed commands mentioned above.
-- (echo ':t
-- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-- fi
-- ac_sed_frag=`expr $ac_sed_frag + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_lines`
-- fi
-- done
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+MKDIR!$MKDIR$ac_delim
-+RM!$RM$ac_delim
-+CP!$CP$ac_delim
-+LN!$LN$ac_delim
-+TAR!$TAR$ac_delim
-+RPM!$RPM$ac_delim
-+SED!$SED$ac_delim
-+FIND!$FIND$ac_delim
-+CPP!$CPP$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LD!$LD$ac_delim
-+AS!$AS$ac_delim
-+OBJCOPY!$OBJCOPY$ac_delim
-+I386_CC!$I386_CC$ac_delim
-+I386_CPP!$I386_CPP$ac_delim
-+I386_LD!$I386_LD$ac_delim
-+I386_AS!$I386_AS$ac_delim
-+I386_OBJCOPY!$I386_OBJCOPY$ac_delim
-+IA64_CC!$IA64_CC$ac_delim
-+IA64_CPP!$IA64_CPP$ac_delim
-+IA64_LD!$IA64_LD$ac_delim
-+IA64_AS!$IA64_AS$ac_delim
-+IA64_OBJCOPY!$IA64_OBJCOPY$ac_delim
-+HOST_CC!$HOST_CC$ac_delim
-+HOST_CFLAGS!$HOST_CFLAGS$ac_delim
-+I386_CFLAGS!$I386_CFLAGS$ac_delim
-+I386_ASFLAGS!$I386_ASFLAGS$ac_delim
-+I386_LDFLAGS!$I386_LDFLAGS$ac_delim
-+IA64_CFLAGS!$IA64_CFLAGS$ac_delim
-+IA64_ASFLAGS!$IA64_ASFLAGS$ac_delim
-+IA64_LDFLAGS!$IA64_LDFLAGS$ac_delim
-+LIBOBJS!$LIBOBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 86; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
--fi # test -n "$CONFIG_FILES"
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
- _ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[ ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-+
- cat >>$CONFIG_STATUS <<\_ACEOF
--for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case $ac_file in
-- - | *:- | *:-:* ) # input from stdin
-- cat >$tmp/stdin
-- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- * ) ac_file_in=$ac_file.in ;;
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in :F $CONFIG_FILES
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-+
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+ ac_file_inputs="$ac_file_inputs $ac_f"
-+ done
-
-- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input="Generated from "`IFS=:
-+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ fi
-+
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin";;
-+ esac
-+ ;;
-+ esac
-+
-+ ac_dir=`$as_dirname -- "$ac_file" ||
- $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
-- X"$ac_file" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$ac_file" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p "$ac_dir"
-- else
-- as_dir="$ac_dir"
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir="$ac_dir"
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
- $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
--echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
--
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
--
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-
-- if test x"$ac_file" != x-; then
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-- rm -f "$ac_file"
-- fi
-- # Let's still pretend it is `configure' which instantiates (i.e., don't
-- # use $as_me), people would be surprised to read:
-- # /* config.h. Generated by config.status. */
-- if test x"$ac_file" = x-; then
-- configure_input=
-- else
-- configure_input="$ac_file. "
-- fi
-- configure_input=$configure_input"Generated from `echo $ac_file_in |
-- sed 's,.*/,,'` by configure."
-+_ACEOF
-
-- # First look for the input files in the build tree, otherwise in the
-- # src tree.
-- ac_file_inputs=`IFS=:
-- for f in $ac_file_in; do
-- case $f in
-- -) echo $tmp/stdin ;;
-- [\\/$]*)
-- # Absolute (can't be DOS-style, as IFS=:)
-- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- echo "$f";;
-- *) # Relative
-- if test -f "$f"; then
-- # Build tree
-- echo "$f"
-- elif test -f "$srcdir/$f"; then
-- # Source tree
-- echo "$srcdir/$f"
-- else
-- # /dev/null tree
-- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- fi;;
-- esac
-- done` || { (exit 1); exit 1; }
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
- $extrasub
- _ACEOF
- cat >>$CONFIG_STATUS <<\_ACEOF
- :t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
--s,@configure_input@,$configure_input,;t t
--s,@srcdir@,$ac_srcdir,;t t
--s,@abs_srcdir@,$ac_abs_srcdir,;t t
--s,@top_srcdir@,$ac_top_srcdir,;t t
--s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
--s,@builddir@,$ac_builddir,;t t
--s,@abs_builddir@,$ac_abs_builddir,;t t
--s,@top_builddir@,$ac_top_builddir,;t t
--s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
--" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-- rm -f $tmp/stdin
-- if test x"$ac_file" != x-; then
-- mv $tmp/out $ac_file
-- else
-- cat $tmp/out
-- rm -f $tmp/out
-- fi
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&2;}
-
--done
--_ACEOF
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out"; rm -f "$tmp/out";;
-+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+ esac
-+ ;;
-+
-+
-+
-+ esac
-+
-+done # for ac_tag
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-
- { (exit 0); exit 0; }
- _ACEOF
Modified: buildrom-devel/packages/mkelfimage/mkelfimage.mk
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfimage.mk 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfimage.mk 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,16 +1,19 @@
-MKELFIMAGE_URL=ftp://ftp.lnxi.com/pub/mkelfImage/
-MKELFIMAGE_SOURCE=mkelfImage-2.7.tar.gz
MKELFIMAGE_DIR=$(BUILD_DIR)/mkelfimage
-MKELFIMAGE_SRC_DIR=$(MKELFIMAGE_DIR)/mkelfImage-2.7
+MKELFIMAGE_SRC_DIR=$(MKELFIMAGE_DIR)/svn
MKELFIMAGE_STAMP_DIR=$(MKELFIMAGE_DIR)/stamps
MKELFIMAGE_LOG_DIR=$(MKELFIMAGE_DIR)/logs
-MKELFIMAGE_PATCHES=$(PACKAGE_DIR)/mkelfimage/mkelfImage-2.7-x86_64.patch
-MKELFIMAGE_PATCHES+=$(PACKAGE_DIR)/mkelfimage/mkelfimage-autoconf.patch
+MKELFIMAGE_PATCHES=
+MKELFIMAGE_TAG=3473
+MKELFIMAGE_TARBALL=mkelfimage-svn-$(MKELFIMAGE_TAG).tar.gz
+MKELFIMAGE_URL=svn://coreboot.org/repos/trunk/util/mkelfImage
+
ifeq ($(CONFIG_VERBOSE),y)
+MKELFIMAGE_FETCH_LOG=/dev/stdout
MKELFIMAGE_BUILD_LOG=/dev/stdout
MKELFIMAGE_CONFIG_LOG=/dev/stdout
else
+MKELFIMAGE_FETCH_LOG=$(MKELFIMAGE_LOG_DIR)/fetch.log
MKELFIMAGE_BUILD_LOG=$(MKELFIMAGE_LOG_DIR)/build.log
MKELFIMAGE_CONFIG_LOG=$(MKELFIMAGE_LOG_DIR)/config.log
endif
@@ -18,13 +21,15 @@
$(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR):
@ mkdir -p $@
-$(SOURCE_DIR)/$(MKELFIMAGE_SOURCE):
+$(SOURCE_DIR)/$(MKELFIMAGE_TARBALL): | $(MKELFIMAGE_LOG_DIR)
+ @ echo "Fetching the mkelfimage rev $(MKELFIMAGE_TAG) code..."
@ mkdir -p $(SOURCE_DIR)
- @ wget $(WGET_Q) -P $(SOURCE_DIR) $(MKELFIMAGE_URL)/$(MKELFIMAGE_SOURCE)
+ @ $(BIN_DIR)/fetchsvn.sh $(MKELFIMAGE_URL) $(SOURCE_DIR)/mkelfimage \
+ $(MKELFIMAGE_TAG) $@ > $(MKELFIMAGE_FETCH_LOG) 2>&1
-$(MKELFIMAGE_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(MKELFIMAGE_SOURCE) | $(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR)
+$(MKELFIMAGE_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(MKELFIMAGE_TARBALL) | $(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR)
@ echo "Unpacking mkelfimage..."
- @ tar -C $(MKELFIMAGE_DIR) -zxf $(SOURCE_DIR)/$(MKELFIMAGE_SOURCE)
+ @ tar -C $(MKELFIMAGE_DIR) -zxf $(SOURCE_DIR)/$(MKELFIMAGE_TARBALL)
@ touch $@
$(MKELFIMAGE_STAMP_DIR)/.patched: $(MKELFIMAGE_STAMP_DIR)/.unpacked
@@ -61,7 +66,7 @@
mkelfimage-bom:
echo "Package: mkelfimage"
- echo "Source: $(MKELFIMAGE_URL)/$(MKELFIMAGE_SOURCE)"
+ echo "Source: $(MKELFIMAGE_URL) rev $(MKELFIMAGE_TAG)"
echo ""
mkelfimage-extract: $(MKELFIMAGE_STAMP_DIR)/.patched
1
0
See patch
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info(a)coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
add get_option to libpayload, so coreboot cmos options can be queried.
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Index: include/sysinfo.h
===================================================================
--- include/sysinfo.h (revision 372)
+++ include/sysinfo.h (working copy)
@@ -43,6 +43,11 @@
unsigned long long base;
unsigned long long size;
} memrange[SYSINFO_MAX_MEM_RANGES];
+
+ struct cb_cmos_option_table *option_table;
+ u32 cmos_range_start;
+ u32 cmos_range_end;
+ u32 cmos_checksum_location;
};
extern struct sysinfo_t lib_sysinfo;
Index: include/coreboot_tables.h
===================================================================
--- include/coreboot_tables.h (revision 372)
+++ include/coreboot_tables.h (working copy)
@@ -128,8 +128,58 @@
#define CB_TAG_CONSOLE_SROM 4
#define CB_TAG_CONSOLE_EHCI 5
-/* Still to come: CMOS information. */
+#define CB_TAG_CMOS_OPTION_TABLE 0x00c8
+struct cb_cmos_option_table {
+ u32 tag;
+ u32 size;
+ u32 header_length;
+};
+#define CB_TAG_OPTION 0x00c9
+#define CMOS_MAX_NAME_LENGTH 32
+struct cb_cmos_entries {
+ u32 tag;
+ u32 size;
+ u32 bit;
+ u32 length;
+ u32 config;
+ u32 config_id;
+ u8 name[CMOS_MAX_NAME_LENGTH];
+};
+
+
+#define CB_TAG_OPTION_ENUM 0x00ca
+#define CMOS_MAX_TEXT_LENGTH 32
+struct cb_cmos_enums {
+ u32 tag;
+ u32 size;
+ u32 config_id;
+ u32 value;
+ u8 text[CMOS_MAX_TEXT_LENGTH];
+};
+
+#define CB_TAG_OPTION_DEFAULTS 0x00cb
+#define CMOS_IMAGE_BUFFER_SIZE 128
+struct cb_cmos_defaults {
+ u32 tag;
+ u32 size;
+ u32 name_length;
+ u8 name[CMOS_MAX_NAME_LENGTH];
+ u8 default_set[CMOS_IMAGE_BUFFER_SIZE];
+};
+
+#define CB_TAG_OPTION_CHECKSUM 0x00cc
+#define CHECKSUM_NONE 0
+#define CHECKSUM_PCBIOS 1
+struct cb_cmos_checksum {
+ u32 tag;
+ u32 size;
+ u32 range_start;
+ u32 range_end;
+ u32 location;
+ u32 type;
+};
+
/* Helpful macros */
#define MEM_RANGE_COUNT(_rec) \
Index: i386/coreboot.c
===================================================================
--- i386/coreboot.c (revision 372)
+++ i386/coreboot.c (working copy)
@@ -74,6 +74,21 @@
info->ser_ioport = ser->ioport;
}
+#ifdef CONFIG_NVRAM
+static void cb_parse_optiontable(unsigned char *ptr, struct sysinfo_t *info)
+{
+ info->option_table = (struct cb_cmos_option_table *)ptr;
+}
+
+static void cb_parse_checksum(unsigned char *ptr, struct sysinfo_t *info)
+{
+ struct cb_cmos_checksum *cmos_cksum = (struct cb_cmos_checksum *)ptr;
+ info->cmos_range_start = cmos_cksum->range_start;
+ info->cmos_range_end = cmos_cksum->range_end;
+ info->cmos_checksum_location = cmos_cksum->location;
+}
+#endif
+
static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
{
struct cb_header *header;
@@ -115,6 +130,14 @@
case CB_TAG_SERIAL:
cb_parse_serial(ptr, info);
break;
+#ifdef CONFIG_NVRAM
+ case CB_TAG_CMOS_OPTION_TABLE:
+ cb_parse_optiontable(ptr, info);
+ break;
+ case CB_TAG_OPTION_CHECKSUM:
+ cb_parse_checksum(ptr, info);
+ break;
+#endif
}
ptr += rec->size;
Index: drivers/Makefile.inc
===================================================================
--- drivers/Makefile.inc (revision 380)
+++ drivers/Makefile.inc (working copy)
@@ -35,6 +35,7 @@
TARGETS-$(CONFIG_SERIAL_CONSOLE) += drivers/serial.o
TARGETS-$(CONFIG_PC_KEYBOARD) += drivers/keyboard.o
TARGETS-$(CONFIG_NVRAM) += drivers/nvram.o
+TARGETS-$(CONFIG_NVRAM) += drivers/options.o
# Video console drivers
TARGETS-$(CONFIG_VIDEO_CONSOLE) += drivers/video/video.o
Index: drivers/options.c
===================================================================
--- drivers/options.c (revision 0)
+++ drivers/options.c (revision 0)
@@ -0,0 +1,106 @@
+/*
+ * This file is part of the libpayload project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <libpayload.h>
+#include <coreboot_tables.h>
+
+static int options_checksum_valid(void)
+{
+ int i;
+ int range_start = lib_sysinfo.cmos_range_start;
+ int range_end = lib_sysinfo.cmos_range_end;
+ int checksum_location = lib_sysinfo.cmos_checksum_location;
+ u16 checksum = 0, checksum_old;
+
+ for(i = range_start; i <= range_end; i++) {
+ checksum += nvram_read(i);
+ }
+ checksum = (~checksum)&0xffff;
+
+ checksum_old = ((nvram_read(checksum_location)<<8) | nvram_read(checksum_location+1));
+
+ return (checksum_old == checksum);
+}
+
+static int get_cmos_value(u32 bitnum, u32 len, void *valptr)
+{
+ u8 *value = (u8 *)valptr;
+ int offs = 0;
+ u32 addr, bit;
+ u8 reg8;
+
+ value = valptr;
+
+ /* Convert to byte borders */
+ addr=(bitnum / 8);
+ bit=(bitnum % 8);
+
+ /* Handle single byte or less */
+ if(len <= 8) {
+ reg8 = nvram_read(addr);
+ reg8 >>= bit;
+ value[0] = reg8 & ((1 << len) -1);
+ return 0;
+ }
+
+ /* When handling more than a byte, copy whole bytes */
+ while (len > 0) {
+ len -= 8;
+ value[offs++]=nvram_read(addr++);
+ }
+
+ return 0;
+}
+
+int get_option(void *dest, char *name)
+{
+ struct cb_cmos_option_table *option_table = lib_sysinfo.option_table;
+ struct cb_cmos_entries *cmos_entry;
+ int len = strnlen(name, CMOS_MAX_NAME_LENGTH);
+
+ /* cmos entries are located right after the option table */
+ cmos_entry=(struct cb_cmos_entries*)((unsigned char *)option_table + option_table->header_length);
+
+ for ( cmos_entry = (struct cb_cmos_entries*)((unsigned char *)option_table + option_table->header_length);
+ cmos_entry->tag == CB_TAG_OPTION;
+ cmos_entry = (struct cb_cmos_entries*)((unsigned char *)cmos_entry + cmos_entry->size)) {
+ if (memcmp(cmos_entry->name, name, len))
+ continue;
+ if(get_cmos_value(cmos_entry->bit, cmos_entry->length, dest))
+ return 1;
+
+ if(!options_checksum_valid())
+ return 1;
+
+ return 0;
+ }
+
+ printf("ERROR: No such CMOS option (%s)\n", name);
+ return 1;
+}
3
2
This patch applies to our mkelfimage tree at svn://coreboot.org/repos/trunk/util/mkelfimage.
Thanks,
Ward.
--
Ward Vandewege <ward(a)fsf.org>
Free Software Foundation - Senior Systems Administrator
2
2
Author: ward
Date: 2008-08-06 22:37:38 +0200 (Wed, 06 Aug 2008)
New Revision: 3473
Modified:
trunk/util/mkelfImage/configure
trunk/util/mkelfImage/configure.ac
trunk/util/mkelfImage/linux-i386/convert.h
trunk/util/mkelfImage/linux-i386/convert.lds
trunk/util/mkelfImage/linux-i386/head.S
trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c
trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c
Log:
Add the contents of buildrom's
packages/mkelfimage/mkelfimage-autoconf.patch
packages/mkelfimage/mkelfImage-2.7-x86_64.patch
to our svn copy of mkelfimage.
Signed-off-by: Ward Vandewege <ward(a)gnu.org>
Acked-by: Jordan Crouse <jordan.crouse(a)amd.com>
These are the original commit messages from the buildrom svn tree:
-----------------------------------------------------------------------
r61 | jcrouse | 2007-11-28 13:06:23 -0500 (Wed, 28 Nov 2007) | 9 lines
[BUILDROM] Fixup mkelfimage
My patch makes it so all targets use vmlinux and 2.7. Including
the mkelfimage patch from Yhinghai Lu.
Signed-off-by: Myles Watson <myles(a)pel.cs.byu.edu>
Acked-by: Jordan Crouse <jordan.crouse(a)amd.com>
------------------------------------------------------------------------
r80 | jcrouse | 2007-12-10 13:56:40 -0500 (Mon, 10 Dec 2007) | 8 lines
[BUILDROM] Fix breakage in the new mkelfimage autoconf scripts
Whack the autoconf scripts in mkelfimage to allow us to pass our
stack protection flags in.
Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com>
Acked-by: Corey Osgood <corey.osgood(a)gmail.com>
------------------------------------------------------------------------
Modified: trunk/util/mkelfImage/configure
===================================================================
--- trunk/util/mkelfImage/configure 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/configure 2008-08-06 20:37:38 UTC (rev 3473)
@@ -1,26 +1,55 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
+# Generated by GNU Autoconf 2.61.
#
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
fi
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -29,8 +58,43 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
@@ -44,18 +108,19 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -63,157 +128,388 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
fi
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
+ case $as_dir in
/*)
- if ("$as_dir/$as_base" -c '
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf(a)gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
+ chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -222,7 +518,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,39 +548,27 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-# CDPATH.
-$as_unset CDPATH
+exec 7<&0 </dev/null 6>&1
-
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-exec 6>&1
-
#
# Initializations.
#
ac_default_prefix=/usr/local
+ac_clean_files=
ac_config_libobj_dir=.
+LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
@@ -275,43 +580,137 @@
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
#endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT MKDIR RM CP LN TAR RPM SED FIND CPP EGREP LD ac_ct_LD AS ac_ct_AS OBJCOPY ac_ct_OBJCOPY I386_CC I386_CPP I386_LD I386_AS I386_OBJCOPY IA64_CC IA64_CPP IA64_LD IA64_AS IA64_OBJCOPY HOST_CC HOST_CFLAGS I386_CFLAGS I386_ASFLAGS I386_LDFLAGS IA64_CFLAGS IA64_ASFLAGS IA64_LDFLAGS LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+MKDIR
+RM
+CP
+LN
+TAR
+RPM
+SED
+FIND
+CPP
+GREP
+EGREP
+LD
+AS
+OBJCOPY
+I386_CC
+I386_CPP
+I386_LD
+I386_AS
+I386_OBJCOPY
+IA64_CC
+IA64_CPP
+IA64_LD
+IA64_AS
+IA64_OBJCOPY
+HOST_CC
+HOST_CFLAGS
+I386_CFLAGS
+I386_ASFLAGS
+I386_LDFLAGS
+IA64_CFLAGS
+IA64_ASFLAGS
+IA64_LDFLAGS
+LIBOBJS
+LTLIBOBJS'
ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
@@ -337,34 +736,48 @@
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
ac_prev=
+ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
+ eval $ac_prev=\$ac_option
ac_prev=
continue
fi
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
# Accept the important Cygnus configure options, so we can diagnose typos.
- case $ac_option in
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
@@ -386,33 +799,45 @@
--config-cache | -C)
cache_file=config.cache ;;
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ -datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -439,6 +864,12 @@
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
@@ -463,13 +894,16 @@
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
-localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
+ | --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -534,6 +968,16 @@
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
@@ -586,24 +1030,20 @@
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
@@ -634,8 +1074,7 @@
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
+ eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
@@ -655,29 +1094,21 @@
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
do
- eval ac_val=$`echo $ac_var`
+ eval ac_val=\$$ac_var
case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
done
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
@@ -702,74 +1133,76 @@
test "$silent" = yes && exec 6>/dev/null
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
+ if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
- fi
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
#
# Report the --help message.
@@ -798,9 +1231,6 @@
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
-_ACEOF
-
- cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
@@ -818,15 +1248,22 @@
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
@@ -852,126 +1289,95 @@
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
_ACEOF
+ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
+ test -d "$ac_dir" || continue
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.61
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
- exit 0
+ exit
fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
_ACEOF
+exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
@@ -990,7 +1396,7 @@
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
@@ -1004,6 +1410,7 @@
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir"
done
+IFS=$as_save_IFS
} >&5
@@ -1025,7 +1432,6 @@
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
-ac_sep=
ac_must_keep_next=false
for ac_pass in 1 2
do
@@ -1036,7 +1442,7 @@
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ *\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
@@ -1058,9 +1464,7 @@
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
+ ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
@@ -1071,8 +1475,8 @@
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
@@ -1085,20 +1489,34 @@
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
(set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
*)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-}
+ esac |
+ sort
+)
echo
cat <<\_ASBOX
@@ -1109,22 +1527,28 @@
echo
for ac_var in $ac_subst_vars
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
@@ -1136,26 +1560,24 @@
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h | sort
+ cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
- ' 0
+' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
# Predefined preprocessor variables.
@@ -1186,14 +1608,17 @@
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
if test -r "$ac_site_file"; then
{ echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1209,8 +1634,8 @@
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
esac
fi
else
@@ -1222,12 +1647,11 @@
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1252,8 +1676,7 @@
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1270,11 +1693,6 @@
{ (exit 1); exit 1; }; }
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
@@ -1291,89 +1709,128 @@
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
ac_aux_dir=
-for ac_dir in ./config $srcdir/./config; do
- if test -f $ac_dir/install-sh; then
+for ac_dir in ./config "$srcdir"/./config; do
+ if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
- elif test -f $ac_dir/install.sh; then
+ elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
- elif test -f $ac_dir/shtool; then
+ elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&2;}
{ (exit 1); exit 1; }; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
{ (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
if test "${ac_cv_build+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
- ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
{ { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
if test "${ac_cv_host+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
- ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
+fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
#AC_CANONICAL_TARGET
@@ -1391,23 +1848,23 @@
targets=""
-# Check whether --with-i386 or --without-i386 was given.
+# Check whether --with-i386 was given.
if test "${with_i386+set}" = set; then
- withval="$with_i386"
- if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
+ withval=$with_i386; if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
else
with_i386="no"
-fi;
+fi
-# Check whether --with-ia64 or --without-ia64 was given.
+
+# Check whether --with-ia64 was given.
if test "${with_ia64+set}" = set; then
- withval="$with_ia64"
- if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
+ withval=$with_ia64; if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
else
with_ia64="no"
-fi;
+fi
+
with_default="no"
if test "$with_i386" = "no" &&
test "$with_ia64" = "no" ; then
@@ -1430,8 +1887,8 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1444,32 +1901,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1482,36 +1941,51 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1524,74 +1998,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
+
fi
-done
-done
-
fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1605,7 +2039,7 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
@@ -1616,6 +2050,7 @@
fi
done
done
+IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
@@ -1633,22 +2068,23 @@
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1661,36 +2097,38 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1703,29 +2141,45 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$ac_ct_CC" && break
done
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
fi
fi
@@ -1738,21 +2192,35 @@
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
@@ -1777,47 +2245,77 @@
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort. b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions. Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
break;;
* )
break;;
esac
done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
else
+ ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -1829,19 +2327,21 @@
fi
ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -1860,22 +2360,27 @@
fi
fi
fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
@@ -1886,9 +2391,8 @@
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
break;;
* ) break;;
esac
@@ -1902,14 +2406,14 @@
fi
rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1929,14 +2433,20 @@
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
@@ -1954,12 +2464,12 @@
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -1982,50 +2492,49 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2041,38 +2550,118 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
@@ -2088,12 +2677,12 @@
CFLAGS=
fi
fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_prog_cc_stdc=no
+ ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2127,12 +2716,17 @@
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
+ as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
+ that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
@@ -2147,205 +2741,57 @@
return 0;
}
_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
*)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
esac
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2356,8 +2802,8 @@
# Extract the first word of "mkdir", so it can be a program name with args.
set dummy mkdir; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_MKDIR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2370,29 +2816,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_MKDIR="mkdir"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
MKDIR=$ac_cv_prog_MKDIR
if test -n "$MKDIR"; then
- echo "$as_me:$LINENO: result: $MKDIR" >&5
-echo "${ECHO_T}$MKDIR" >&6
+ { echo "$as_me:$LINENO: result: $MKDIR" >&5
+echo "${ECHO_T}$MKDIR" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "rm", so it can be a program name with args.
set dummy rm; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_RM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2405,29 +2853,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RM="rm"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
RM=$ac_cv_prog_RM
if test -n "$RM"; then
- echo "$as_me:$LINENO: result: $RM" >&5
-echo "${ECHO_T}$RM" >&6
+ { echo "$as_me:$LINENO: result: $RM" >&5
+echo "${ECHO_T}$RM" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "cp", so it can be a program name with args.
set dummy cp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2440,29 +2890,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CP="cp"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CP=$ac_cv_prog_CP
if test -n "$CP"; then
- echo "$as_me:$LINENO: result: $CP" >&5
-echo "${ECHO_T}$CP" >&6
+ { echo "$as_me:$LINENO: result: $CP" >&5
+echo "${ECHO_T}$CP" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "ln", so it can be a program name with args.
set dummy ln; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_LN+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2475,29 +2927,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_LN="ln"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
LN=$ac_cv_prog_LN
if test -n "$LN"; then
- echo "$as_me:$LINENO: result: $LN" >&5
-echo "${ECHO_T}$LN" >&6
+ { echo "$as_me:$LINENO: result: $LN" >&5
+echo "${ECHO_T}$LN" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "tar", so it can be a program name with args.
set dummy tar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_TAR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2510,29 +2964,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_TAR="tar"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
TAR=$ac_cv_prog_TAR
if test -n "$TAR"; then
- echo "$as_me:$LINENO: result: $TAR" >&5
-echo "${ECHO_T}$TAR" >&6
+ { echo "$as_me:$LINENO: result: $TAR" >&5
+echo "${ECHO_T}$TAR" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "rpm", so it can be a program name with args.
set dummy rpm; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_RPM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2545,29 +3001,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RPM="rpm"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
RPM=$ac_cv_prog_RPM
if test -n "$RPM"; then
- echo "$as_me:$LINENO: result: $RPM" >&5
-echo "${ECHO_T}$RPM" >&6
+ { echo "$as_me:$LINENO: result: $RPM" >&5
+echo "${ECHO_T}$RPM" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "sed", so it can be a program name with args.
set dummy sed; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_SED+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2580,29 +3038,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_SED="sed"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
SED=$ac_cv_prog_SED
if test -n "$SED"; then
- echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
+ { echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
# Extract the first word of "find", so it can be a program name with args.
set dummy find; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_FIND+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2615,33 +3075,35 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_FIND="find"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
FIND=$ac_cv_prog_FIND
if test -n "$FIND"; then
- echo "$as_me:$LINENO: result: $FIND" >&5
-echo "${ECHO_T}$FIND" >&6
+ { echo "$as_me:$LINENO: result: $FIND" >&5
+echo "${ECHO_T}$FIND" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -2675,24 +3137,22 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
@@ -2701,9 +3161,10 @@
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2713,24 +3174,22 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
@@ -2741,6 +3200,7 @@
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -2758,8 +3218,8 @@
else
ac_cv_prog_CPP=$CPP
fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
@@ -2782,24 +3242,22 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
@@ -2808,9 +3266,10 @@
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2820,24 +3279,22 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
@@ -2848,6 +3305,7 @@
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -2870,23 +3328,170 @@
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
+ # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ # Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_GREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ # Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_EGREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2910,36 +3515,32 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_header_stdc=no
+ ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
@@ -2994,6 +3595,7 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ctype.h>
+#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -3013,18 +3615,27 @@
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
+ return 2;
+ return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -3037,12 +3648,14 @@
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
+
+
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -3065,9 +3678,9 @@
inttypes.h stdint.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -3081,38 +3694,35 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
+ eval "$as_ac_Header=no"
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -3124,17 +3734,17 @@
if test "${ac_cv_header_zlib_h+set}" = set; then
- echo "$as_me:$LINENO: checking for zlib.h" >&5
-echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for zlib.h" >&5
+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
if test "${ac_cv_header_zlib_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking zlib.h usability" >&5
-echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking zlib.h usability" >&5
+echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -3145,41 +3755,37 @@
#include <zlib.h>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
# Is the header present?
-echo "$as_me:$LINENO: checking zlib.h presence" >&5
-echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking zlib.h presence" >&5
+echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -3188,24 +3794,22 @@
/* end confdefs.h. */
#include <zlib.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
@@ -3213,9 +3817,10 @@
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -3239,30 +3844,23 @@
echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists. ##
-## ------------------------------------------ ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+
;;
esac
-echo "$as_me:$LINENO: checking for zlib.h" >&5
-echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for zlib.h" >&5
+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
if test "${ac_cv_header_zlib_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_header_zlib_h=$ac_header_preproc
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
fi
if test $ac_cv_header_zlib_h = yes; then
- echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
-echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
+echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6; }
if test "${ac_cv_lib_z_inflateInit_+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3276,56 +3874,53 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char inflateInit_ ();
int
main ()
{
-inflateInit_ ();
+return inflateInit_ ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
ac_cv_lib_z_inflateInit_=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_z_inflateInit_=no
+ ac_cv_lib_z_inflateInit_=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
-echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
+echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6; }
if test $ac_cv_lib_z_inflateInit_ = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_ZLIB_H 1
@@ -3349,8 +3944,8 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -3384,24 +3979,22 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
@@ -3410,9 +4003,10 @@
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3422,24 +4016,22 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
@@ -3450,6 +4042,7 @@
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -3467,8 +4060,8 @@
else
ac_cv_prog_CPP=$CPP
fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
@@ -3491,24 +4084,22 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
@@ -3517,9 +4108,10 @@
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3529,24 +4121,22 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
@@ -3557,6 +4147,7 @@
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -3587,8 +4178,8 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
set dummy ${ac_tool_prefix}ld; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3601,32 +4192,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_LD="${ac_tool_prefix}ld"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
LD=$ac_cv_prog_LD
if test -n "$LD"; then
- echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+ { echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_LD"; then
ac_ct_LD=$LD
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3639,27 +4232,41 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_LD="ld"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
- test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="no"
fi
fi
ac_ct_LD=$ac_cv_prog_ac_ct_LD
if test -n "$ac_ct_LD"; then
- echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
-echo "${ECHO_T}$ac_ct_LD" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
+echo "${ECHO_T}$ac_ct_LD" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- LD=$ac_ct_LD
+ if test "x$ac_ct_LD" = x; then
+ LD="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ LD=$ac_ct_LD
+ fi
else
LD="$ac_cv_prog_LD"
fi
@@ -3673,8 +4280,8 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_AS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3687,32 +4294,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AS="${ac_tool_prefix}as"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
AS=$ac_cv_prog_AS
if test -n "$AS"; then
- echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+ { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_AS"; then
ac_ct_AS=$AS
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3725,27 +4334,41 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AS="as"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="no"
fi
fi
ac_ct_AS=$ac_cv_prog_ac_ct_AS
if test -n "$ac_ct_AS"; then
- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- AS=$ac_ct_AS
+ if test "x$ac_ct_AS" = x; then
+ AS="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ AS=$ac_ct_AS
+ fi
else
AS="$ac_cv_prog_AS"
fi
@@ -3759,8 +4382,8 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ac_tool_prefix}objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3773,32 +4396,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
OBJCOPY=$ac_cv_prog_OBJCOPY
if test -n "$OBJCOPY"; then
- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-echo "${ECHO_T}$OBJCOPY" >&6
+ { echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_OBJCOPY"; then
ac_ct_OBJCOPY=$OBJCOPY
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3811,27 +4436,41 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_OBJCOPY="objcopy"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
- test -z "$ac_cv_prog_ac_ct_OBJCOPY" && ac_cv_prog_ac_ct_OBJCOPY="no"
fi
fi
ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
if test -n "$ac_ct_OBJCOPY"; then
- echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
-echo "${ECHO_T}$ac_ct_OBJCOPY" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
+echo "${ECHO_T}$ac_ct_OBJCOPY" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- OBJCOPY=$ac_ct_OBJCOPY
+ if test "x$ac_ct_OBJCOPY" = x; then
+ OBJCOPY="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf(a)gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJCOPY=$ac_ct_OBJCOPY
+ fi
else
OBJCOPY="$ac_cv_prog_OBJCOPY"
fi
@@ -3862,8 +4501,8 @@
fi
# Extract the first word of "$cc", so it can be a program name with args.
set dummy $cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_I386_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3876,26 +4515,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_I386_CC="$cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_I386_CC" && ac_cv_prog_I386_CC=""""
fi
fi
I386_CC=$ac_cv_prog_I386_CC
if test -n "$I386_CC"; then
- echo "$as_me:$LINENO: result: $I386_CC" >&5
-echo "${ECHO_T}$I386_CC" >&6
+ { echo "$as_me:$LINENO: result: $I386_CC" >&5
+echo "${ECHO_T}$I386_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$I386_CC" = no; then
{ { echo "$as_me:$LINENO: error: $cc not found" >&5
@@ -3904,8 +4545,8 @@
fi
# Extract the first word of "$cpp", so it can be a program name with args.
set dummy $cpp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_I386_CPP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3918,26 +4559,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_I386_CPP="$cpp"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_I386_CPP" && ac_cv_prog_I386_CPP=""""
fi
fi
I386_CPP=$ac_cv_prog_I386_CPP
if test -n "$I386_CPP"; then
- echo "$as_me:$LINENO: result: $I386_CPP" >&5
-echo "${ECHO_T}$I386_CPP" >&6
+ { echo "$as_me:$LINENO: result: $I386_CPP" >&5
+echo "${ECHO_T}$I386_CPP" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$I386_CPP" = no; then
{ { echo "$as_me:$LINENO: error: $cpp not found" >&5
echo "$as_me: error: $cpp not found" >&2;}
@@ -3945,8 +4588,8 @@
fi
# Extract the first word of "$ld", so it can be a program name with args.
set dummy $ld; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_I386_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3959,26 +4602,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_I386_LD="$ld"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_I386_LD" && ac_cv_prog_I386_LD=""""
fi
fi
I386_LD=$ac_cv_prog_I386_LD
if test -n "$I386_LD"; then
- echo "$as_me:$LINENO: result: $I386_LD" >&5
-echo "${ECHO_T}$I386_LD" >&6
+ { echo "$as_me:$LINENO: result: $I386_LD" >&5
+echo "${ECHO_T}$I386_LD" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$I386_AS" = no; then
{ { echo "$as_me:$LINENO: error: $ld not found" >&5
echo "$as_me: error: $ld not found" >&2;}
@@ -3986,8 +4631,8 @@
fi
# Extract the first word of "$as", so it can be a program name with args.
set dummy $as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_I386_AS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4000,26 +4645,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_I386_AS="$as"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_I386_AS" && ac_cv_prog_I386_AS=""""
fi
fi
I386_AS=$ac_cv_prog_I386_AS
if test -n "$I386_AS"; then
- echo "$as_me:$LINENO: result: $I386_AS" >&5
-echo "${ECHO_T}$I386_AS" >&6
+ { echo "$as_me:$LINENO: result: $I386_AS" >&5
+echo "${ECHO_T}$I386_AS" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$I386_AS" = no; then
{ { echo "$as_me:$LINENO: error: $as not found" >&5
echo "$as_me: error: $as not found" >&2;}
@@ -4027,8 +4674,8 @@
fi
# Extract the first word of "$objcopy", so it can be a program name with args.
set dummy $objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_I386_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4041,26 +4688,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_I386_OBJCOPY="$objcopy"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_I386_OBJCOPY" && ac_cv_prog_I386_OBJCOPY=""""
fi
fi
I386_OBJCOPY=$ac_cv_prog_I386_OBJCOPY
if test -n "$I386_OBJCOPY"; then
- echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
-echo "${ECHO_T}$I386_OBJCOPY" >&6
+ { echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
+echo "${ECHO_T}$I386_OBJCOPY" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$I386_OBJCOPY" = no; then
{ { echo "$as_me:$LINENO: error: $objcopy not found" >&5
echo "$as_me: error: $objcopy not found" >&2;}
@@ -4083,8 +4732,8 @@
fi
# Extract the first word of "$cc", so it can be a program name with args.
set dummy $cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_IA64_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4097,26 +4746,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_IA64_CC="$cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_IA64_CC" && ac_cv_prog_IA64_CC=""""
fi
fi
IA64_CC=$ac_cv_prog_IA64_CC
if test -n "$IA64_CC"; then
- echo "$as_me:$LINENO: result: $IA64_CC" >&5
-echo "${ECHO_T}$IA64_CC" >&6
+ { echo "$as_me:$LINENO: result: $IA64_CC" >&5
+echo "${ECHO_T}$IA64_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$IA64_CC" = no; then
{ { echo "$as_me:$LINENO: error: $cc not found" >&5
@@ -4125,8 +4776,8 @@
fi
# Extract the first word of "$cpp", so it can be a program name with args.
set dummy $cpp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_IA64_CPP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4139,26 +4790,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_IA64_CPP="$cpp"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_IA64_CPP" && ac_cv_prog_IA64_CPP=""""
fi
fi
IA64_CPP=$ac_cv_prog_IA64_CPP
if test -n "$IA64_CPP"; then
- echo "$as_me:$LINENO: result: $IA64_CPP" >&5
-echo "${ECHO_T}$IA64_CPP" >&6
+ { echo "$as_me:$LINENO: result: $IA64_CPP" >&5
+echo "${ECHO_T}$IA64_CPP" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$IA64_CPP" = no; then
{ { echo "$as_me:$LINENO: error: $cpp not found" >&5
echo "$as_me: error: $cpp not found" >&2;}
@@ -4166,8 +4819,8 @@
fi
# Extract the first word of "$ld", so it can be a program name with args.
set dummy $ld; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_IA64_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4180,26 +4833,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_IA64_LD="$ld"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_IA64_LD" && ac_cv_prog_IA64_LD=""""
fi
fi
IA64_LD=$ac_cv_prog_IA64_LD
if test -n "$IA64_LD"; then
- echo "$as_me:$LINENO: result: $IA64_LD" >&5
-echo "${ECHO_T}$IA64_LD" >&6
+ { echo "$as_me:$LINENO: result: $IA64_LD" >&5
+echo "${ECHO_T}$IA64_LD" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$IA64_AS" = no; then
{ { echo "$as_me:$LINENO: error: $ld not found" >&5
echo "$as_me: error: $ld not found" >&2;}
@@ -4207,8 +4862,8 @@
fi
# Extract the first word of "$as", so it can be a program name with args.
set dummy $as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_IA64_AS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4221,26 +4876,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_IA64_AS="$as"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_IA64_AS" && ac_cv_prog_IA64_AS=""""
fi
fi
IA64_AS=$ac_cv_prog_IA64_AS
if test -n "$IA64_AS"; then
- echo "$as_me:$LINENO: result: $IA64_AS" >&5
-echo "${ECHO_T}$IA64_AS" >&6
+ { echo "$as_me:$LINENO: result: $IA64_AS" >&5
+echo "${ECHO_T}$IA64_AS" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$IA64_AS" = no; then
{ { echo "$as_me:$LINENO: error: $as not found" >&5
echo "$as_me: error: $as not found" >&2;}
@@ -4248,8 +4905,8 @@
fi
# Extract the first word of "$objcopy", so it can be a program name with args.
set dummy $objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_IA64_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4262,26 +4919,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_IA64_OBJCOPY="$objcopy"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
test -z "$ac_cv_prog_IA64_OBJCOPY" && ac_cv_prog_IA64_OBJCOPY=""""
fi
fi
IA64_OBJCOPY=$ac_cv_prog_IA64_OBJCOPY
if test -n "$IA64_OBJCOPY"; then
- echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
-echo "${ECHO_T}$IA64_OBJCOPY" >&6
+ { echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
+echo "${ECHO_T}$IA64_OBJCOPY" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test "$IA64_OBJCOPY" = no; then
{ { echo "$as_me:$LINENO: error: $objcopy not found" >&5
echo "$as_me: error: $objcopy not found" >&2;}
@@ -4292,13 +4951,13 @@
HOST_CC=$CC
-HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
-I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
I386_ASFLAGS=''
I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
-IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
IA64_ASFLAGS='-mconstant-gp -mauto-pic'
IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
@@ -4323,7 +4982,8 @@
- ac_config_files="$ac_config_files Makefile.conf"
+ac_config_files="$ac_config_files Makefile.conf"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
@@ -4342,39 +5002,58 @@
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
+ ;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-} |
+ esac |
+ sort
+) |
sed '
+ /^ac_cv_env_/b end
t clear
- : clear
+ :clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- echo "not updating unwritable cache $cache_file"
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -4383,63 +5062,48 @@
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
+# take arguments), then branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -4470,18 +5134,46 @@
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
fi
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -4490,8 +5182,43 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
@@ -4505,18 +5232,19 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -4524,159 +5252,120 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -4685,7 +5374,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -4694,31 +5404,14 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
exec 6>&1
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -4726,30 +5419,18 @@
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
+_ACEOF
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
cat >>$CONFIG_STATUS <<\_ACEOF
-
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
@@ -4757,7 +5438,7 @@
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
- -V, --version print version number, then exit
+ -V, --version print version number and configuration settings, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
@@ -4768,18 +5449,20 @@
$config_files
Report bugs to <bug-autoconf(a)gnu.org>."
+
_ACEOF
-
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -4790,60 +5473,42 @@
do
case $1 in
--*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
- -*)
+ *)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
- *) ac_config_targets="$ac_config_targets $1" ;;
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
esac
shift
@@ -4859,28 +5524,42 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
for ac_config_target in $ac_config_targets
do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile.conf" ) CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
+ case $ac_config_target in
+ "Makefile.conf") CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
+
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
+
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
@@ -4890,361 +5569,437 @@
fi
# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
-
# Create a (secure) tmp directory for tmp files.
{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
#
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@MKDIR@,$MKDIR,;t t
-s,@RM@,$RM,;t t
-s,@CP@,$CP,;t t
-s,@LN@,$LN,;t t
-s,@TAR@,$TAR,;t t
-s,@RPM@,$RPM,;t t
-s,@SED@,$SED,;t t
-s,@FIND@,$FIND,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LD@,$LD,;t t
-s,@ac_ct_LD@,$ac_ct_LD,;t t
-s,@AS@,$AS,;t t
-s,@ac_ct_AS@,$ac_ct_AS,;t t
-s,@OBJCOPY@,$OBJCOPY,;t t
-s,@ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t
-s,@I386_CC@,$I386_CC,;t t
-s,@I386_CPP@,$I386_CPP,;t t
-s,@I386_LD@,$I386_LD,;t t
-s,@I386_AS@,$I386_AS,;t t
-s,@I386_OBJCOPY@,$I386_OBJCOPY,;t t
-s,@IA64_CC@,$IA64_CC,;t t
-s,@IA64_CPP@,$IA64_CPP,;t t
-s,@IA64_LD@,$IA64_LD,;t t
-s,@IA64_AS@,$IA64_AS,;t t
-s,@IA64_OBJCOPY@,$IA64_OBJCOPY,;t t
-s,@HOST_CC@,$HOST_CC,;t t
-s,@HOST_CFLAGS@,$HOST_CFLAGS,;t t
-s,@I386_CFLAGS@,$I386_CFLAGS,;t t
-s,@I386_ASFLAGS@,$I386_ASFLAGS,;t t
-s,@I386_LDFLAGS@,$I386_LDFLAGS,;t t
-s,@IA64_CFLAGS@,$IA64_CFLAGS,;t t
-s,@IA64_ASFLAGS@,$IA64_ASFLAGS,;t t
-s,@IA64_LDFLAGS@,$IA64_LDFLAGS,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
+if test -n "$CONFIG_FILES"; then
_ACEOF
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+MKDIR!$MKDIR$ac_delim
+RM!$RM$ac_delim
+CP!$CP$ac_delim
+LN!$LN$ac_delim
+TAR!$TAR$ac_delim
+RPM!$RPM$ac_delim
+SED!$SED$ac_delim
+FIND!$FIND$ac_delim
+CPP!$CPP$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+LD!$LD$ac_delim
+AS!$AS$ac_delim
+OBJCOPY!$OBJCOPY$ac_delim
+I386_CC!$I386_CC$ac_delim
+I386_CPP!$I386_CPP$ac_delim
+I386_LD!$I386_LD$ac_delim
+I386_AS!$I386_AS$ac_delim
+I386_OBJCOPY!$I386_OBJCOPY$ac_delim
+IA64_CC!$IA64_CC$ac_delim
+IA64_CPP!$IA64_CPP$ac_delim
+IA64_LD!$IA64_LD$ac_delim
+IA64_AS!$IA64_AS$ac_delim
+IA64_OBJCOPY!$IA64_OBJCOPY$ac_delim
+HOST_CC!$HOST_CC$ac_delim
+HOST_CFLAGS!$HOST_CFLAGS$ac_delim
+I386_CFLAGS!$I386_CFLAGS$ac_delim
+I386_ASFLAGS!$I386_ASFLAGS$ac_delim
+I386_LDFLAGS!$I386_LDFLAGS$ac_delim
+IA64_CFLAGS!$IA64_CFLAGS$ac_delim
+IA64_ASFLAGS!$IA64_ASFLAGS$ac_delim
+IA64_LDFLAGS!$IA64_LDFLAGS$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 86; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
-fi # test -n "$CONFIG_FILES"
+done
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+_ACEOF
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-done
-_ACEOF
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
-cat >>$CONFIG_STATUS <<\_ACEOF
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+
+
+ esac
+
+done # for ac_tag
+
+
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
Modified: trunk/util/mkelfImage/configure.ac
===================================================================
--- trunk/util/mkelfImage/configure.ac 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/configure.ac 2008-08-06 20:37:38 UTC (rev 3473)
@@ -173,15 +173,15 @@
dnl ---Output variables...
HOST_CC=$CC
-HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
dnl TODO: figure out how to set these appropriately for compilers other than gcc
-I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
I386_ASFLAGS=''
I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
dnl TODO: figure out how to set these appropriately for compilers other than gcc
-IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
IA64_ASFLAGS='-mconstant-gp -mauto-pic'
IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
Modified: trunk/util/mkelfImage/linux-i386/convert.h
===================================================================
--- trunk/util/mkelfImage/linux-i386/convert.h 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/linux-i386/convert.h 2008-08-06 20:37:38 UTC (rev 3473)
@@ -3,6 +3,8 @@
#define CONVERTLOC 0x10000
#define REAL_MODE_DATA_LOC 0x20000
#define GDTLOC 0x21000
+#define GDT64LOC 0x22000
+#define PGTLOC 0x23000
#define DEFAULT_ROOT_DEV ((0x3<<8)| 0)
@@ -18,10 +20,13 @@
struct image_parameters {
uint32_t convert_magic; /* a signature to verify mkelfImage was built properly */
uint32_t gdt_size;
+ uint32_t gdt64_size;
+ uint32_t pgt_size;
uint32_t bss_size;
uint16_t ramdisk_flags;
uint16_t root_dev;
uint32_t entry;
+ uint32_t switch_64;
uint32_t initrd_start;
uint32_t initrd_size;
uint8_t cmdline[CMDLINE_MAX];
Modified: trunk/util/mkelfImage/linux-i386/convert.lds
===================================================================
--- trunk/util/mkelfImage/linux-i386/convert.lds 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/linux-i386/convert.lds 2008-08-06 20:37:38 UTC (rev 3473)
@@ -27,7 +27,7 @@
*(.bss)
}
_end = . ;
- bss_size = _end - _bss;
+ bss_sizex = _end - _bss;
/DISCARD/ : {
*(.comment)
Modified: trunk/util/mkelfImage/linux-i386/head.S
===================================================================
--- trunk/util/mkelfImage/linux-i386/head.S 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/linux-i386/head.S 2008-08-06 20:37:38 UTC (rev 3473)
@@ -59,7 +59,7 @@
movl $GDTLOC, %edi
movl $(gdt_end - gdt), %ecx
rep movsb
-
+
# Linux makes stupid assumptions about the segments
# that are already setup, so setup a new gdt & ldt
# and then reload the segment registers.
@@ -95,22 +95,113 @@
# Flag to indicate we are the bootstrap processor
xorl %ebx, %ebx
+ movl switch_64, %eax
+ cmp $1, %eax
+ jz switch_to_64
+
# Clear the unspecified registers for good measure
xorl %eax, %eax
xorl %ecx, %ecx
xorl %edx, %edx
xorl %edi, %edi
- xorl %esp, %esp
xorl %ebp, %ebp
+ # do not clear esp, we still need to use lret later
- # Jump to the linux kernel
- ljmp $ PROT_CODE_SEG , $ 0x100000
+ pushl $PROT_CODE_SEG
+ movl entry, %eax
+ pushl %eax
+ lret
- /* Routines to query the BIOS... */
+switch_to_64:
+ /* We need to switch to 64bit before use startup_64 entry go to kernel */
+ /*
+ * Prepare for entering 64 bit mode
+ */
+ # Move the gdt64 where Linux will not smash it during decompression
+ movl %esi, %eax # save the real mode pointer
+ movl $gdt64, %esi
+ movl $GDT64LOC, %edi
+ movl $(gdt64_end - gdt64), %ecx
+ rep movsb
+ movl %eax, %esi
+ /* Load new GDT with the 64bit segments using 32bit descriptor */
+ lgdt gdt64
+
+ /* Enable PAE mode */
+ xorl %eax, %eax
+ btsl $5, %eax
+ movl %eax, %cr4
+
+ /*
+ * Build early 4G boot pagetable
+ */
+ /* Initialize Page tables to 0*/
+ movl $PGTLOC, %edi
+ xorl %eax, %eax
+ movl $((4096*6)/4), %ecx
+ rep stosl
+
+ /* Build Level 4 */
+ movl $(PGTLOC + 0), %edi
+ leal 0x1007 (%edi), %eax
+ movl %eax, 0(%edi)
+
+ /* Build Level 3 */
+ movl $(PGTLOC + 0x1000), %edi
+ leal 0x1007(%edi), %eax
+ movl $4, %ecx
+1: movl %eax, 0x00(%edi)
+ addl $0x00001000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Build Level 2 */
+ movl $(PGTLOC + 0x2000), %edi
+ movl $0x00000183, %eax
+ movl $2048, %ecx
+1: movl %eax, 0(%edi)
+ addl $0x00200000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Enable the boot page tables */
+ movl $PGTLOC, %eax
+ movl %eax, %cr3
+
+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
+ movl $0xc0000080, %ecx
+ rdmsr
+ btsl $8, %eax
+ wrmsr
+
+ /* Preparing for 64bit jmp */
+ pushl $PROT_CODE_SEG
+ movl entry, %eax
+ pushl %eax
+
+ /* Enter paged protected Mode, activating Long Mode */
+ xorl %eax, %eax
+ btsl $31, %eax
+ btsl $0, %eax
+ movl %eax, %cr0
+
+ /*
+ * At this point we're in long mode but in 32bit compatibility mode
+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ */
+
+ lret
+
+
+ /* Routines to query the BIOS... */
/**************************************************************************
E820_MEMSIZE - Get a listing of memory regions
**************************************************************************/
@@ -409,6 +500,7 @@
.word 0x9200 # data read/write
.word 0x00CF # granularity = 4096, 386
# (+5th nibble of limit)
+
/*
* The layout of the per-CPU GDT under Linux:
*
@@ -446,7 +538,14 @@
*/
gdt_end:
-
+gdt64:
+ .word gdt64_end - gdt64
+ .long GDT64LOC
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+gdt64_end:
.section ".trailer", "a"
/* Constants set at build time, these are at the very end of my image */
@@ -458,14 +557,20 @@
.long CONVERT_MAGIC
gdt_size:
.long gdt_end - gdt
+gdt64_size:
+ .long gdt64_end - gdt64
+pgt_size:
+ .long 4096*6
bss_size:
- .long bss_size
+ .long bss_sizex
ramdisk_flags:
.word 0
root_dev:
.word DEFAULT_ROOT_DEV
entry:
.long 0
+switch_64:
+ .long 0
initrd_start:
.long 0
initrd_size:
Modified: trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c
===================================================================
--- trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c 2008-08-06 20:37:38 UTC (rev 3473)
@@ -19,13 +19,16 @@
static void (*parse_kernel_type)(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size);
+
char *vmlinux_i386_probe(char *kernel_buf, off_t kernel_size)
{
Elf32_Ehdr *ehdr;
Elf32_Phdr *phdr;
int i;
- int hdr1, hdr2;
+ int phdrs;
ehdr = (Elf32_Ehdr *)kernel_buf;
if (
(ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
@@ -35,7 +38,8 @@
return "No ELF signature found on kernel\n";
}
if (ehdr->e_ident[EI_CLASS] != ELFCLASS32) {
- return "Not a 32bit ELF kernel\n";
+ return vmlinux_x86_64_probe(kernel_buf, kernel_size);
+// return "Not a 32bit ELF kernel\n";
}
if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
return "Not a little endian ELF kernel\n";
@@ -54,27 +58,64 @@
return "Kernel uses bad program header size.\n";
}
phdr = (Elf32_Phdr *)(kernel_buf + le32_to_cpu(ehdr->e_phoff));
- hdr1 = hdr2 = -1;
- for(i = 0; i < le32_to_cpu(ehdr->e_phnum); i++) {
+ phdrs = 0;
+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
continue;
- if (((hdr1 != -1) &&
- ((le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff) != 0x100000)) ||
- (hdr2 != -1)) {
- return "Too many PT_LOAD segments to be a linux kernel\n";
- }
- if (hdr1 == -1) {
- hdr1 = i;
- } else {
- hdr2 = i;
- }
+ phdrs++;
}
- if (hdr1 == -1) {
+ if (phdrs == 0) {
return "No PT_LOAD segments!\n";
}
parse_kernel_type = parse_elf32_kernel;
return 0;
}
+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size)
+{
+ Elf64_Ehdr *ehdr;
+ Elf64_Phdr *phdr;
+ int i;
+ int phdrs = 0;
+ ehdr = (Elf64_Ehdr *)kernel_buf;
+ if (
+ (ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
+ (ehdr->e_ident[EI_MAG1] != ELFMAG1) ||
+ (ehdr->e_ident[EI_MAG2] != ELFMAG2) ||
+ (ehdr->e_ident[EI_MAG3] != ELFMAG3)) {
+ return "No ELF signature found on kernel\n";
+ }
+ if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) {
+ return "Not a 64bit ELF kernel\n";
+ }
+ if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
+ return "Not a little endian ELF kernel\n";
+ }
+ if (le16_to_cpu(ehdr->e_type) != ET_EXEC) {
+ return "Not an executable kernel\n";
+ }
+ if (le16_to_cpu(ehdr->e_machine) != EM_X86_64) {
+ return "Not an x86_64 kernel\n";
+ }
+ if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) ||
+ (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) {
+ return "Kernel not using ELF version 1.\n";
+ }
+ if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) {
+ return "Kernel uses bad program header size.\n";
+ }
+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
+ phdrs = 0;
+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
+ continue;
+ phdrs++;
+ }
+ if (phdrs == 0) {
+ return "No PT_LOAD segments!\n";
+ }
+ parse_kernel_type = parse_elf64_kernel;
+ return 0;
+}
char *bzImage_i386_probe(char *kernel_buf, off_t kernel_size)
{
@@ -118,17 +159,14 @@
struct kernel_info
{
- void *kernel;
- size_t filesz;
- size_t memsz;
- size_t paddr;
- size_t vaddr;
- void *kernel2;
- size_t filesz2;
- size_t memsz2;
- size_t paddr2;
- size_t vaddr2;
+ int phdrs;
+ void *kernel[4];
+ size_t filesz[4];
+ size_t memsz[4];
+ size_t paddr[4];
+ size_t vaddr[4];
size_t entry;
+ size_t switch_64;
char *version;
};
@@ -137,43 +175,68 @@
Elf32_Ehdr *ehdr;
Elf32_Phdr *phdr;
int i;
- int hdr1, hdr2;
+ int phdrs;
ehdr = (Elf32_Ehdr *)kernel_buf;
phdr = (Elf32_Phdr *)(kernel_buf + ehdr->e_phoff);
- hdr1 = hdr2 = -1;
+ phdrs = 0;
for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
continue;
- if (hdr2 != -1) {
- die("Too many PT_LOAD segments to be a linux kernel\n");
- }
- if (hdr1 == -1) {
- hdr1 = i;
- } else {
- hdr2 = i;
- }
+ info->kernel[phdrs] = kernel_buf + le32_to_cpu(phdr[i].p_offset);
+ info->filesz[phdrs] = le32_to_cpu(phdr[i].p_filesz);
+ info->memsz[phdrs] = le32_to_cpu(phdr[i].p_memsz);
+ info->paddr[phdrs] = le32_to_cpu(phdr[i].p_paddr) & 0xfffffff;
+ info->vaddr[phdrs] = le32_to_cpu(phdr[i].p_vaddr);
+ phdrs++;
}
- if (hdr1 == -1) {
- die("No PT_LOAD segments!\n");
+
+ if(!phdrs)
+ die("We need at least one phdr\n");
+
+ info->phdrs = phdrs;
+ info->entry = le32_to_cpu(ehdr->e_entry);
+ info->switch_64 = 0; //not convert from elf64
+ info->version = "unknown";
+}
+
+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
+{
+ Elf64_Ehdr *ehdr;
+ Elf64_Phdr *phdr;
+ int i;
+ int phdrs;
+ ehdr = (Elf64_Ehdr *)kernel_buf;
+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
+
+ phdrs = 0;
+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
+ continue;
+ info->kernel[phdrs] = kernel_buf + le64_to_cpu(phdr[i].p_offset);
+ info->filesz[phdrs] = le64_to_cpu(phdr[i].p_filesz);
+ info->memsz[phdrs] = le64_to_cpu(phdr[i].p_memsz);
+ info->paddr[phdrs] = le64_to_cpu(phdr[i].p_paddr) & 0xffffff;
+ info->vaddr[phdrs] = le64_to_cpu(phdr[i].p_vaddr);
+ phdrs++;
}
- info->kernel = kernel_buf + le32_to_cpu(phdr[hdr1].p_offset);
- info->filesz = le32_to_cpu(phdr[hdr1].p_filesz);
- info->memsz = le32_to_cpu(phdr[hdr1].p_memsz);
- info->paddr = le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff;
- info->vaddr = le32_to_cpu(phdr[hdr1].p_vaddr);
- if (hdr2 != -1) {
- info->kernel2 = kernel_buf + le32_to_cpu(phdr[hdr2].p_offset);
- info->filesz2 = le32_to_cpu(phdr[hdr2].p_filesz);
- info->memsz2 = le32_to_cpu(phdr[hdr2].p_memsz);
- info->paddr2 = le32_to_cpu(phdr[hdr2].p_paddr) & 0xfffffff;
- info->vaddr2 = le32_to_cpu(phdr[hdr2].p_vaddr);
- }
+ if(!phdrs)
+ die("We need at least one phdr\n");
- info->entry = 0x100000;
- info->version = "unknown";
+ info->phdrs = phdrs;
+ info->entry = le64_to_cpu(ehdr->e_entry);
+#if 0
+ if (info->entry != info->paddr[0]) {
+ info->entry = info->paddr[0]; // we still have startup_32 there
+ info->switch_64 = 0; //not convert from elf64
+ } else
+#endif
+ info->switch_64 = 1; //convert from elf64
+
+ info->version = "unknown";
}
+
static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
{
struct x86_linux_header *hdr;
@@ -186,12 +249,14 @@
}
offset = 512 + (512 *setup_sects);
- info->kernel = kernel_buf + offset;
- info->filesz = kernel_size - offset;
- info->memsz = 0x700000;
- info->paddr = 0x100000;
- info->vaddr = 0x100000;
- info->entry = info->paddr;
+ info->kernel[0] = kernel_buf + offset;
+ info->filesz[0] = kernel_size - offset;
+ info->memsz[0] = 0x700000;
+ info->paddr[0] = 0x100000;
+ info->vaddr[0] = 0x100000;
+ info->phdrs = 1;
+ info->entry = info->paddr[0];
+ info->switch_64 = 0; //not convert from elf64, even later bzImage become elf64, it still includes startup_32
info->version = kernel_buf + 512 + le16_to_cpu(hdr->kver_addr);
}
@@ -237,6 +302,7 @@
struct kernel_info kinfo;
struct image_parameters *params;
int index;
+ int i;
int opt;
static const struct option options[] = {
@@ -310,7 +376,7 @@
/* Add a program header for the note section */
index = 4;
- index += kinfo.kernel2 ? 1:0;
+ index += (kinfo.phdrs - 1);
index += ramdisk_size ? 1:0;
phdr = add_program_headers(ehdr, index);
@@ -328,23 +394,24 @@
phdr[2].p_paddr = REAL_MODE_DATA_LOC;
phdr[2].p_vaddr = REAL_MODE_DATA_LOC;
phdr[2].p_filesz = 0;
- phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
+ if(!kinfo.switch_64)
+ phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
+ else
+ phdr[2].p_memsz = (PGTLOC - REAL_MODE_DATA_LOC) + params->pgt_size;
phdr[2].p_data = 0;
- phdr[3].p_paddr = kinfo.paddr;
- phdr[3].p_vaddr = kinfo.vaddr;
- phdr[3].p_filesz = kinfo.filesz;
- phdr[3].p_memsz = kinfo.memsz;
- phdr[3].p_data = kinfo.kernel;
+ if( (phdr[1].p_paddr + phdr[1].p_memsz) > phdr[2].p_paddr) {
+ die("Internal error: need to increase REAL_MODE_DATA_LOC !\n");
+ }
- index = 4;
+ index = 3;
/* Put the second kernel frament if present */
- if (kinfo.kernel2) {
- phdr[index].p_paddr = kinfo.paddr2;
- phdr[index].p_vaddr = kinfo.vaddr2;
- phdr[index].p_filesz = kinfo.filesz2;
- phdr[index].p_memsz = kinfo.memsz2;
- phdr[index].p_data = kinfo.kernel2;
+ for(i=0;i<kinfo.phdrs;i++) {
+ phdr[index].p_paddr = kinfo.paddr[i];
+ phdr[index].p_vaddr = kinfo.vaddr[i];
+ phdr[index].p_filesz = kinfo.filesz[i];
+ phdr[index].p_memsz = kinfo.memsz[i];
+ phdr[index].p_data = kinfo.kernel[i];
index++;
}
@@ -352,6 +419,10 @@
*/
params->initrd_start = params->initrd_size = 0;
if (ramdisk_size) {
+ if( (phdr[index-1].p_paddr + phdr[index-1].p_memsz) > ramdisk_base) {
+ die("need to increase increase ramdisk_base !\n");
+ }
+
phdr[index].p_paddr = ramdisk_base;
phdr[index].p_vaddr = ramdisk_base;
phdr[index].p_filesz = ramdisk_size;
@@ -364,6 +435,7 @@
/* Set the start location */
params->entry = kinfo.entry;
+ params->switch_64 = kinfo.switch_64;
ehdr->e_entry = phdr[1].p_paddr;
/* Setup the elf notes */
Modified: trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c
===================================================================
--- trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c 2008-08-05 14:36:20 UTC (rev 3472)
+++ trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c 2008-08-06 20:37:38 UTC (rev 3473)
@@ -81,7 +81,7 @@
phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
phdrs = 0;
for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
- if (le16_to_cpu(phdr[i].p_type) != PT_LOAD)
+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
continue;
phdrs++;
}
1
0
Author: ward
Date: 2008-08-06 17:32:47 +0200 (Wed, 06 Aug 2008)
New Revision: 214
Modified:
buildrom-devel/packages/geodevsa/amdvsa.inc
Log:
Make sure that we create $(SOURCE_DIR) prior to downloading AMD's precompiled
VSA, in case it does not exist yet.
This is a trivial patch.
Signed-off-by: Ward Vandewege <ward(a)gnu.org>
Acked-by: Ward Vandewege <ward(a)gnu.org>
Modified: buildrom-devel/packages/geodevsa/amdvsa.inc
===================================================================
--- buildrom-devel/packages/geodevsa/amdvsa.inc 2008-08-02 22:14:30 UTC (rev 213)
+++ buildrom-devel/packages/geodevsa/amdvsa.inc 2008-08-06 15:32:47 UTC (rev 214)
@@ -11,6 +11,7 @@
# Jordan
$(SOURCE_DIR)/$(AMDVSA_BIN):
+ @ mkdir -p $(SOURCE_DIR)
@ echo "Fetching the AMD VSA binary..."
wget $(WGET_Q) -P $(SOURCE_DIR) $(AMDVSA_URL)/$(AMDVSA_BIN).gz -O $@.gz
@ if file $@.gz | grep -q "gzip"; then \
1
0
see patch
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info(a)coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
add missing pci functions and change to a simpler, more common interface
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Index: drivers/pci.c
===================================================================
--- drivers/pci.c (revision 372)
+++ drivers/pci.c (working copy)
@@ -2,6 +2,7 @@
* This file is part of the libpayload project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -30,32 +31,70 @@
#include <libpayload.h>
#include <pci.h>
+u8 pci_read_config8(pcidev_t device, u16 reg)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ return inb(0xCFC + (reg & 3));
+}
+
+u16 pci_read_config16(pcidev_t device, u16 reg)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ return inw(0xCFC + (reg & 3));
+}
+
+u32 pci_read_config32(pcidev_t device, u16 reg)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ return inl(0xCFC + (reg & 3));
+}
+
+void pci_write_config8(pcidev_t device, u16 reg, u8 val)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ outb(val, 0xCFC + (reg & 3));
+}
+
+void pci_write_config16(pcidev_t device, u16 reg, u16 val)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ outw(val, 0xCFC + (reg & 3));
+}
+
+void pci_write_config32(pcidev_t device, u16 reg, u32 val)
+{
+ outl(device | (reg & ~3), 0xCF8);
+ outl(val, 0xCFC + (reg & 3));
+}
+
static int find_on_bus(int bus, unsigned short vid, unsigned short did,
pcidev_t * dev)
{
int devfn;
- unsigned int val;
+ u32 val;
unsigned char hdr;
for (devfn = 0; devfn < 0x100; devfn++) {
- pci_read_dword(bus, devfn, REG_VENDOR_ID, &val);
+ val = pci_read_config32(PCI_DEV(bus, PCI_SLOT(devfn),
+ PCI_FUNC(devfn)), REG_VENDOR_ID);
if (val == 0xffffffff || val == 0x00000000 ||
val == 0x0000ffff || val == 0xffff0000)
continue;
if (val == ((did << 16) | vid)) {
- *dev = PCIDEV(bus, devfn);
+ *dev = PCI_DEV(bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
return 1;
}
- pci_read_byte(bus, devfn, REG_HEADER_TYPE, &hdr);
-
+ hdr = pci_read_config8(PCI_DEV(bus, PCI_SLOT(devfn),
+ PCI_FUNC(devfn)), REG_HEADER_TYPE);
hdr &= 0x7F;
if (hdr == HEADER_TYPE_BRIDGE || hdr == HEADER_TYPE_CARDBUS) {
unsigned int busses;
- pci_read_dword(bus, devfn, REG_PRIMARY_BUS, &busses);
+ busses = pci_read_config32(PCI_DEV(bus, PCI_SLOT(devfn),
+ PCI_FUNC(devfn)), REG_PRIMARY_BUS);
if (find_on_bus((busses >> 8) & 0xFF, vid, did, dev))
return 1;
}
@@ -64,29 +103,12 @@
return 0;
}
-void pci_read_dword(unsigned int bus, unsigned int devfn,
- unsigned int reg, unsigned int *val)
+int pci_find_device(u16 vid, u16 did, pcidev_t * dev)
{
- outl(PCI_ADDR(bus, devfn, reg), 0xCF8);
- *val = inl(0xCFC);
-}
-
-void pci_read_byte(unsigned int bus, unsigned int devfn,
- unsigned int reg, unsigned char *val)
-{
- outl(PCI_ADDR(bus, devfn, reg), 0xCF8);
- *val = inb(0xCFC + (reg & 3));
-}
-
-int pci_find_device(unsigned short vid, unsigned short did, pcidev_t * dev)
-{
return find_on_bus(0, vid, did, dev);
}
-unsigned int pci_read_resource(pcidev_t dev, int bar)
+u32 pci_read_resource(pcidev_t dev, int bar)
{
- unsigned int val;
- pci_read_dword(PCIDEV_BUS(dev), PCIDEV_DEVFN(dev), 0x10 + (bar * 4),
- &val);
- return val;
+ return pci_read_config32(dev, 0x10 + (bar * 4));
}
Index: include/pci.h
===================================================================
--- include/pci.h (revision 372)
+++ include/pci.h (working copy)
@@ -2,6 +2,7 @@
* This file is part of the libpayload project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -30,7 +31,7 @@
#ifndef _PCI_H
#define _PCI_H
-typedef unsigned short pcidev_t;
+typedef u32 pcidev_t;
#define REG_VENDOR_ID 0x00
#define REG_DEVICE_ID 0x04
@@ -41,21 +42,24 @@
#define HEADER_TYPE_BRIDGE 1
#define HEADER_TYPE_CARDBUS 2
-#define PCIDEV(_b, _d) ((((_b) & 0xFF) << 8) | ((_d) & 0xFF))
+#define PCI_ADDR(_bus, _dev, _fn, _reg) \
+(0x80000000 | (_bus << 16) | (_dev << 11) | (_fn << 8) | (_reg & ~3))
-#define PCIDEV_BUS(_d) (((_d) >> 8) & 0xFF)
-#define PCIDEV_DEVFN(_d) ((_d) & 0xFF)
+#define PCI_DEV(_bus, _dev, _fn) \
+(0x80000000 | (_bus << 16) | (_dev << 11) | (_fn << 8))
-#define PCI_ADDR(_bus, _dev, _reg) \
-(0x80000000 | (_bus << 16) | (_dev << 8) | (_reg & ~3))
+#define PCI_SLOT(_d) ((_d >> 11) & 0x1f)
+#define PCI_FUNC(_d) ((_d >> 8) & 0x7)
-void pci_read_dword(unsigned int bus, unsigned int devfn,
- unsigned int reg, unsigned int *val);
+u8 pci_read_config8(u32 device, u16 reg);
+u16 pci_read_config16(u32 device, u16 reg);
+u32 pci_read_config32(u32 device, u16 reg);
-void pci_read_byte(unsigned int bus, unsigned int devfn,
- unsigned int reg, unsigned char *val);
+void pci_write_config8(u32 device, u16 reg, u8 val);
+void pci_write_config16(u32 device, u16 reg, u16 val);
+void pci_write_config32(u32 device, u16 reg, u32 val);
-int pci_find_device(unsigned short vid, unsigned short did, pcidev_t *dev);
-unsigned int pci_read_resource(pcidev_t dev, int bar);
+int pci_find_device(u16 vid, u16 did, pcidev_t *dev);
+u32 pci_read_resource(pcidev_t dev, int bar);
#endif
3
4
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Index: util/kconfig/lxdialog/Makefile
===================================================================
--- util/kconfig/lxdialog/Makefile (revision 372)
+++ util/kconfig/lxdialog/Makefile (working copy)
@@ -25,7 +25,7 @@
util.o lxdialog.o msgbox.o
lxdialog: dochecklxdialog $(lxdialog-objs)
- $(CC) $(HOST_LOADLIBES) -o lxdialog $(lxdialog-objs)
+ $(Q)$(HOSTCC) $(HOST_LOADLIBES) -o lxdialog $(lxdialog-objs)
%.o: %.c
$(Q)$(HOSTCC) $(HOST_EXTRACFLAGS) $^ -c -o $@
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info(a)coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
2
1
Current state of tree. This all compiles with only errors for stuff
not yet defined.
Too many fixes in here to list them all :-)
but:
convert mcp55 over to new resource maps.
fix my misunderstanding of one aspect of resource map setup
Fix typo in config_{read,write} naming.
Fix random mistakes in include files.
YHLU: question: is REV F a proper superset of all K8? If we do REV F compatible
code, and test for REV A-E in our coded and take appropriate action,
will the code work properly? Can we have e.g.
the same mem_controller struct for all K8?
I'd like to avoid the files we had in v2 with stuff like xyz_f and
just have one common set of K8 files.
It's even ok if, e.g., there are struct members in the mem_controller
struct that are only used on rev f
or dual core, and unused otherwise. I'd like to simplify the tangle we
had in v2.
Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com>
3
10
05 Aug '08
05 Aug '08
#111: Add i18n support for translating strings e.g. for bayou / coreinfo
---------------------------------+------------------------------------------
Reporter: uwe | Owner: somebody
Type: enhancement | Status: new
Priority: major | Milestone:
Component: bayou | Version:
Keywords: | Dependencies:
Patchstatus: there is no patch |
---------------------------------+------------------------------------------
At some point we might want to translate bayou menu item strings, coreinfo
strings, etc. etc. into other languages, probably with totally different
character sets (think chinese).
For this we'll likely need lots of infrastructure, including a small UTF
lib, fonts, VESA support, and more.
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/111>
coreboot <http://www.coreboot.org/>
1
0