coreboot September 2007

coreboot@coreboot.org

81 participants
367 discussions

Re: [LinuxBIOS] r2805 - trunk/util/superiotool
by Uwe Hermann 24 Sep '07

24 Sep '07

On Tue, Sep 25, 2007 at 12:02:31AM +0200, svn(a)openbios.org wrote: > Fix compilation warning. > > Signed-off-by: Ward Vandewege <ward(a)gnu.org> > Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> I sort of acked this on IRC, but as we should only accept explicit, written Signed-off-by and Acked-by (per email), here goes: Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> > Modified: trunk/util/superiotool/superiotool.c > =================================================================== > --- trunk/util/superiotool/superiotool.c 2007-09-24 20:00:32 UTC (rev 2804) > +++ trunk/util/superiotool/superiotool.c 2007-09-24 22:02:31 UTC (rev 2805) > @@ -75,7 +75,8 @@ > static void dump_regs(const struct superio_registers reg_table[], > int i, int j, uint16_t port) > { > - int k, *idx; > + int k; > + const int *idx; > > if (reg_table[i].ldn[j].ldn != NOLDN) { > printf("LDN 0x%02x ", reg_table[i].ldn[j].ldn); Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

1 0

[LinuxBIOS] [PATCH] buildrom: add support for tyan s2891
by Ward Vandewege 24 Sep '07

24 Sep '07

This was tested on real hardware. -- Ward Vandewege <ward(a)fsf.org> Free Software Foundation - Senior System Administrator

2 3

[LinuxBIOS] r39 - in buildrom-devel: config/payloads config/platforms packages/filo/conf packages/kernel packages/kernel/conf packages/linuxbios packages/linuxbios/patches
by svn＠openbios.org 24 Sep '07

24 Sep '07

Author: ward Date: 2007-09-25 00:13:39 +0200 (Tue, 25 Sep 2007) New Revision: 39 Added: buildrom-devel/config/platforms/tyan-s2891.conf buildrom-devel/packages/filo/conf/tyan-s2891-Config buildrom-devel/packages/kernel/conf/defconfig-tyan-s2891 buildrom-devel/packages/kernel/tyan-s2891-kernel.mk buildrom-devel/packages/linuxbios/patches/tyan-s2891-filo-Config.lb.patch buildrom-devel/packages/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk Modified: buildrom-devel/config/payloads/Config.in buildrom-devel/config/platforms/Config.in buildrom-devel/config/platforms/platforms.conf Log: This patch adds Tyan s2891 support to buildrom. This makes booting from SATA easier, as the CK804 chipset on this board can not emulate SATA disks as IDE devices. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: buildrom-devel/config/payloads/Config.in =================================================================== --- buildrom-devel/config/payloads/Config.in 2007-09-24 22:12:17 UTC (rev 38) +++ buildrom-devel/config/payloads/Config.in 2007-09-24 22:13:39 UTC (rev 39) @@ -14,6 +14,8 @@ select PAYLOAD config PAYLOAD_ETHERBOOT + depends !PLATFORM_M57SLI + depends !PLATFORM_TYAN_S2891 bool "Etherboot" select PAYLOAD @@ -30,10 +32,14 @@ select PAYLOAD config PAYLOAD_OFW + depends !PLATFORM_M57SLI + depends !PLATFORM_TYAN_S2891 bool "OpenFirmware" select PAYLOAD config PAYLOAD_MEMTEST + depends !PLATFORM_M57SLI + depends !PLATFORM_TYAN_S2891 bool "Memtest86+" select PAYLOAD Modified: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel/config/platforms/Config.in 2007-09-24 22:12:17 UTC (rev 38) +++ buildrom-devel/config/platforms/Config.in 2007-09-24 22:13:39 UTC (rev 39) @@ -30,5 +30,9 @@ bool "Gigabyte M57SLI" select PLATFORM +config PLATFORM_TYAN_S2891 + bool "Tyan S2891" + select PLATFORM + endchoice endmenu Modified: buildrom-devel/config/platforms/platforms.conf =================================================================== --- buildrom-devel/config/platforms/platforms.conf 2007-09-24 22:12:17 UTC (rev 38) +++ buildrom-devel/config/platforms/platforms.conf 2007-09-24 22:13:39 UTC (rev 39) @@ -12,5 +12,6 @@ PLATFORM-$(CONFIG_PLATFORM_DB800) = db800.conf PLATFORM-$(CONFIG_PLATFORM_DBE61) = dbe61.conf PLATFORM-$(CONFIG_PLATFORM_M57SLI) = m57sli.conf +PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf include $(CONFIG_DIR)/platforms/$(PLATFORM-y) Added: buildrom-devel/config/platforms/tyan-s2891.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2891.conf (rev 0) +++ buildrom-devel/config/platforms/tyan-s2891.conf 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,38 @@ +# Support for the Tyan S2891 board + +#### Platform configuration + +CC=gcc +STRIP=strip +AS=as + +TARGET_ARCH=i686 +CFLAGS_platform = -m32 + +# Targets + +KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2891-kernel.mk +LINUXBIOS_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2891-linuxbios.mk + +# kernel configuration (for LAB) + +KERNEL_VERSION=2.6.22.2 +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/tyan-s2891-defconfig +UCLIBC_ARCH=i386 + +# Etherboot configuration +ETHERBOOT_ARCH=i386 + +# LinuxBIOS configuration + +LINUXBIOS_VENDOR=tyan +LINUXBIOS_BOARD=s2891 +LINUXBIOS_CONFIG=Config.lb +LINUXBIOS_TDIR=s2891 +LINUXBIOS_TAG=2792 +LINUXBIOS_ROM_NAME=linuxbios.rom + +# FILO configuration + +FILO_CONFIG=tyan-s2891-Config + Added: buildrom-devel/packages/filo/conf/tyan-s2891-Config =================================================================== --- buildrom-devel/packages/filo/conf/tyan-s2891-Config (rev 0) +++ buildrom-devel/packages/filo/conf/tyan-s2891-Config 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,50 @@ +# Use grub instead of autoboot? +USE_GRUB = 1 +# Grub menu.lst path +MENULST_FILE = "hda1:/boot/grub/menu.lst" +# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus +IDE_DISK = 1 +# Add a short delay when polling status registers +# (required on some broken SATA controllers) +IDE_DISK_POLL_DELAY = 1 +# Driver for USB Storage +USB_DISK = 1 +# VGA text console +VGA_CONSOLE = 1 +PC_KEYBOARD = 1 +# Enable the serial console +SERIAL_CONSOLE = 1 +# Serial console; real external serial port +SERIAL_IOBASE = 0x3f8 +SERIAL_SPEED = 115200 +# Filesystems +FSYS_EXT2FS = 1 +FSYS_ISO9660 = 1 +# Support for boot disk image in bootable CD-ROM (El Torito) +ELTORITO = 1 +# PCI support +SUPPORT_PCI = 1 +# Enable this to scan PCI busses above bus 0 +# AMD64 based boards do need this. +PCI_BRUTE_SCAN = 1 +# Loader for standard Linux kernel image, a.k.a. /vmlinuz +LINUX_LOADER = 1 + +# Debugging +DEBUG_ALL = 1 +#DEBUG_ELFBOOT = 1 +#DEBUG_ELFNOTE = 1 +#DEBUG_LINUXBIOS = 1 +#DEBUG_MALLOC = 1 +#DEBUG_MULTIBOOT = 1 +#DEBUG_SEGMENT = 1 +#DEBUG_SYS_INFO = 1 +#DEBUG_TIMER = 1 +#DEBUG_BLOCKDEV = 1 +#DEBUG_PCI = 1 +#DEBUG_VIA_SOUND = 1 +#DEBUG_LINUXLOAD = 1 +#DEBUG_IDE = 1 +#DEBUG_USB = 1 +#DEBUG_ELTORITO = 1 + Added: buildrom-devel/packages/kernel/conf/defconfig-tyan-s2891 =================================================================== --- buildrom-devel/packages/kernel/conf/defconfig-tyan-s2891 (rev 0) +++ buildrom-devel/packages/kernel/conf/defconfig-tyan-s2891 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,1193 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.2 +# Sun Sep 30 14:52:47 2007 +# +CONFIG_X86_32=y +CONFIG_GENERIC_TIME=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_X86=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="BuildROM L-A-B V1.0" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_SYSENTER is not set +# CONFIG_AIO is not set +# CONFIG_XATTR is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_ETHTOOL is not set +# CONFIG_INETPEER is not set +# CONFIG_NET_DEV_MULTICAST is not set +# CONFIG_MEASURE_INLINES is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK_FUNC=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +CONFIG_ELF_CORE=y +CONFIG_PANIC=y +CONFIG_FULL_PANIC=y +CONFIG_BASE_FULL=y +CONFIG_NET_SMALL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_CRC32_TABLES is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_CC_FUNIT_AT_A_TIME=y +CONFIG_LINUXTINY_DO_UNINLINE=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_MAX_SWAPFILES_SHIFT=0 +CONFIG_NR_LDISCS=2 +CONFIG_MAX_USER_RT_PRIO=5 +CONFIG_RT_MUTEXES=y +CONFIG_CRC32_CALC=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor type and features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_SMP is not set +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_PARAVIRT is not set +CONFIG_M386=y +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MCORE2 is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_F00F_BUG=y +CONFIG_X86_MINIMUM_CPU_MODEL=0 +CONFIG_HPET_TIMER=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +# CONFIG_X86_MCE is not set +# CONFIG_VM86 is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_NR_QUICK=1 +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_SECCOMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_COMPAT_VDSO=y + +# +# Power management options (ACPI, APM) +# +# CONFIG_PM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_IDEDISK is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_CMD640 is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +CONFIG_SATA_NV=y +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +# CONFIG_VIDEO_SELECT is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# +# CONFIG_EDAC is not set + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# +# CONFIG_KVM is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_EARLY_PRINTK=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_CAST5=y +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set + +# +# Hardware crypto devices +# +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_KTIME_SCALAR=y Added: buildrom-devel/packages/kernel/tyan-s2891-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/tyan-s2891-kernel.mk (rev 0) +++ buildrom-devel/packages/kernel/tyan-s2891-kernel.mk 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,25 @@ +# Build file for the Tyan S2891 LAB kernel + +KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ +KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2891 + +TINY_URL=http://elinux.org/images/0/0e/ +TINY_SOURCE=Tiny-quilt-2.6.22.1-1.tar.gz +TINY_DIR=$(KERNEL_DIR)/tiny/patches + +KERNEL_PATCHES += $(TINY_DIR) + +$(SOURCE_DIR)/$(KERNEL_SOURCE): + @ mkdir -p $(SOURCE_DIR) + @ wget -P $(SOURCE_DIR) $(KERNEL_URL)/$(KERNEL_SOURCE) + +$(SOURCE_DIR)/$(TINY_SOURCE): + @ mkdir -p $(SOURCE_DIR) + @ wget -P $(SOURCE_DIR) $(TINY_URL)/$(TINY_SOURCE) + +include $(PACKAGE_DIR)/kernel/kernel.inc + +kernel: generic-kernel +kernel-clean: generic-kernel-clean +kernel-distclean: generic-kernel-distclean Added: buildrom-devel/packages/linuxbios/patches/tyan-s2891-filo-Config.lb.patch =================================================================== --- buildrom-devel/packages/linuxbios/patches/tyan-s2891-filo-Config.lb.patch (rev 0) +++ buildrom-devel/packages/linuxbios/patches/tyan-s2891-filo-Config.lb.patch 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,66 @@ +Index: targets/tyan/s2891/Config.lb +=================================================================== +--- LinuxBIOSv2/targets/tyan/s2891/Config.lb (revision 2742) ++++ LinuxBIOSv2/targets/tyan/s2891/Config.lb (working copy) +@@ -7,55 +7,21 @@ + + # Tyan s2891 + romimage "normal" +-# 48K for ATI ROM in 1M +- option ROM_SIZE = 1024*1024-48*1024 +-# 48K for SCSI FW or ATI ROM +-# option ROM_SIZE = 512*1024-48*1024 +-# 48K for SCSI FW and 48K for ATI ROM +-# option ROM_SIZE = 512*1024-48*1024-48*1024 +-# 64K for Etherboot +-# option ROM_SIZE = 512*1024-64*1024 ++ # 36K for ATI ROM in 1M ++ option ROM_SIZE = 1024*1024-36*1024 + option USE_FALLBACK_IMAGE=0 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x13000 +-# option ROM_IMAGE_SIZE=0x16000 + option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option XIP_ROM_SIZE=0x20000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_com2.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_5_3.zelf +-# payload ../../../payloads/tg3--filo_btext_hda2.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + + romimage "fallback" + option USE_FALLBACK_IMAGE=1 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x13000 +-# option ROM_IMAGE_SIZE=0x16000 + option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option XIP_ROM_SIZE=0x20000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_com2.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_5_3.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--filo_btext_hda2.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + + buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" Added: buildrom-devel/packages/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch =================================================================== --- buildrom-devel/packages/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch (rev 0) +++ buildrom-devel/packages/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,70 @@ +--- LinuxBIOSv2/targets/tyan/s2891/Config.lb 2007-09-26 16:37:35.000000000 -0400 ++++ LinuxBIOSv2/targets/tyan/s2891/Config.lb 2007-09-26 18:09:54.000000000 -0400 +@@ -5,57 +5,19 @@ + target s2891 + mainboard tyan/s2891 + +-# Tyan s2891 +-romimage "normal" +-# 48K for ATI ROM in 1M +- option ROM_SIZE = 1024*1024-48*1024 +-# 48K for SCSI FW or ATI ROM +-# option ROM_SIZE = 512*1024-48*1024 +-# 48K for SCSI FW and 48K for ATI ROM +-# option ROM_SIZE = 512*1024-48*1024-48*1024 +-# 64K for Etherboot +-# option ROM_SIZE = 512*1024-64*1024 +- option USE_FALLBACK_IMAGE=0 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x13000 +-# option ROM_IMAGE_SIZE=0x16000 +- option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 +- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_com2.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_5_3.zelf +-# payload ../../../payloads/tg3--filo_btext_hda2.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf +-end ++option ROM_SIZE=0x100000 ++# 36K for ATI ROM in 1M ++option FALLBACK_SIZE=(ROM_SIZE-0x9000) + ++# Tyan s2891 + romimage "fallback" + option USE_FALLBACK_IMAGE=1 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x13000 +-# option ROM_IMAGE_SIZE=0x16000 +- option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option CONFIG_COMPRESSED_PAYLOAD_LZMA=1 ++ option CONFIG_PRECOMPRESSED_PAYLOAD=1 ++ option ROM_IMAGE_SIZE=0x17000 ++ option XIP_ROM_SIZE=0x40000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_com2.zelf +-# payload ../../../payloads/tg3--filo_hda2_vga_5_3.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--filo_btext_hda2.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + +-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" ++buildrom ./linuxbios.rom ROM_SIZE "fallback" Added: buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk (rev 0) +++ buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2007-09-24 22:13:39 UTC (rev 39) @@ -0,0 +1,44 @@ +# This is the Generic LinuxBIOS target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(LINUXBIOS_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +LINUXBIOS_PATCHES = + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-filo-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch +endif + + +LINUXBIOS_BASE_DIR=svn +LINUXBIOS_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 +LINUXBIOS_TARBALL=linuxbios-svn-$(LINUXBIOS_TAG).tar.gz +LINUXBIOS_PAYLOAD_TARGET=$(LINUXBIOS_BUILD_DIR)/payload.elf +TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom + +include $(PACKAGE_DIR)/linuxbios/linuxbios.inc + +$(SOURCE_DIR)/$(LINUXBIOS_TARBALL): + @ echo "Fetching the LinuxBIOS code..." + @ mkdir -p $(SOURCE_DIR)/linuxbios + @ $(BIN_DIR)/fetchsvn.sh $(LINUXBIOS_URL) $(SOURCE_DIR)/linuxbios \ + $(LINUXBIOS_TAG) $(SOURCE_DIR)/$(LINUXBIOS_TARBALL) \ + > $(LINUXBIOS_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(LINUXBIOS_OUTPUT) + @ cat $(LINUXBIOS_OUTPUT) > $@ + +linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) +linuxbios-clean: generic-linuxbios-clean +linuxbios-distclean: generic-linuxbios-distclean

1 0

[LinuxBIOS] r38 - buildrom-devel/skeleton/bin
by svn＠openbios.org 24 Sep '07

24 Sep '07

Author: ward Date: 2007-09-25 00:12:17 +0200 (Tue, 25 Sep 2007) New Revision: 38 Modified: buildrom-devel/skeleton/bin/boot.functions Log: This patch makes sure that specifying an initrd in the LAB config file is actually respected (that was a bug). It also moves the LAB config file to /lab.conf on the first partition. The kexec binary is now also expected to live in /kexec on the first partition. The reason for putting the LAB config file and kexec binary in / on partition 1 rather than /etc and /sbin respectively, is that often (at least in our setups) /boot is the first partition, and is a simple software raid-1 across however many disks there are in the system. The rest of the partitions can be software raid-5, LVM on sw raid, etc. We do things this way because GRUB does not understand software raid nor LVM. Not needing MD or LVM drivers in the kernel that lives in rom makes it smaller, which is desirable. Putting a static kexec in / on the first partition means that it will not be managed by a package manager, which could overwrite it with a dynamic version one day, which would break the next boot... Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: buildrom-devel/skeleton/bin/boot.functions =================================================================== --- buildrom-devel/skeleton/bin/boot.functions 2007-09-14 16:28:23 UTC (rev 37) +++ buildrom-devel/skeleton/bin/boot.functions 2007-09-24 22:12:17 UTC (rev 38) @@ -5,8 +5,8 @@ # The best solution is to use olpc-boot.sh CMDLINE="root=/dev/sda1 ro console=tty0 console=ttyS0,115200" -KERNEL="/boot/vmlinuz" -INITRD="/boot/initrd.img" +KERNEL="vmlinuz" +INITRD="initrd.img" VT="1" message() { @@ -20,14 +20,19 @@ # Switch to the mounted directory to make life easier for the script cd $DIR - # Any of the above can be over-ridden by /boot.conf + # Any of the above can be over-ridden by /lab.conf - if [ -f $DIR/etc/boot.conf ]; then - . $DIR/etc/boot.conf + if [ -f $DIR/lab.conf ]; then + . $DIR/lab.conf fi - $DIR/sbin/kexec -l $DIR/$KERNEL --command-line="$CMDLINE" - $DIR/sbin/kexec -e + if [ "$INITRD" = "" ]; then + $DIR/kexec -l $DIR/$KERNEL --command-line="$CMDLINE" + else + $DIR/kexec -l $DIR/$KERNEL --initrd=$DIR/$INITRD --command-line="$CMDLINE" + fi - message "ERROR: can't run kexec $DIR$KERNEL $CMDLINE $INITRD" + $DIR/kexec -e + + message "ERROR: can't run kexec $DIR/$KERNEL $CMDLINE $INITRD" }

1 0

[LinuxBIOS] r2805 - trunk/util/superiotool
by svn＠openbios.org 24 Sep '07

24 Sep '07

Author: ward Date: 2007-09-25 00:02:31 +0200 (Tue, 25 Sep 2007) New Revision: 2805 Modified: trunk/util/superiotool/superiotool.c Log: Fix compilation warning. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/superiotool.c =================================================================== --- trunk/util/superiotool/superiotool.c 2007-09-24 20:00:32 UTC (rev 2804) +++ trunk/util/superiotool/superiotool.c 2007-09-24 22:02:31 UTC (rev 2805) @@ -75,7 +75,8 @@ static void dump_regs(const struct superio_registers reg_table[], int i, int j, uint16_t port) { - int k, *idx; + int k; + const int *idx; if (reg_table[i].ldn[j].ldn != NOLDN) { printf("LDN 0x%02x ", reg_table[i].ldn[j].ldn);

1 0

[LinuxBIOS] r2804 build service
by LinuxBIOS information 24 Sep '07

24 Sep '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2804 to the LinuxBIOS source repository and caused the following changes: Change Log: Various cosmetic changes and coding style fixes (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2804&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2804 - trunk/LinuxBIOSv2/src/mainboard/asus/a8n_e
by svn＠openbios.org 24 Sep '07

24 Sep '07

Author: uwe Date: 2007-09-24 22:00:32 +0200 (Mon, 24 Sep 2007) New Revision: 2804 Modified: trunk/LinuxBIOSv2/src/mainboard/asus/a8n_e/Config.lb Log: Various cosmetic changes and coding style fixes (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/LinuxBIOSv2/src/mainboard/asus/a8n_e/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/a8n_e/Config.lb 2007-09-24 01:40:09 UTC (rev 2803) +++ trunk/LinuxBIOSv2/src/mainboard/asus/a8n_e/Config.lb 2007-09-24 20:00:32 UTC (rev 2804) @@ -1,7 +1,7 @@ ## ## This file is part of the LinuxBIOS project. ## -## Copyright (C) 2007 AMD +## Copyright (C) 2007 AMD ## (Written by Yinghai Lu <yinghailu(a)amd.com> for AMD) ## Copyright (C) 2007 Philipp Degler <pdegler(a)rumms.uni-mannheim.de> ## (Thanks to LSRA University of Mannheim for their support) @@ -26,47 +26,46 @@ ## (linuxBIOS plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE - default ROM_SECTION_SIZE = FAILOVER_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE) else - if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - default ROM_SECTION_OFFSET = 0 - end + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + default ROM_SECTION_OFFSET = 0 + end end ## -## Compute the start location and size size of -## The linuxBIOS bootloader. +## Compute the start location and size size of the LinuxBIOS bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = ( 0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1 ) +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of LinuxBIOS will start in the boot ROM. ## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can be cached to speed up LinuxBIOS ## execution speed. ## -## XIP_ROM_SIZE must be a power of 2. (here 64 Kbyte) +## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte) ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## -default XIP_ROM_SIZE = ( 64 * 1024 ) +default XIP_ROM_SIZE = (64 * 1024) if USE_FAILOVER_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE ) + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) else - if USE_FALLBACK_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE ) - else - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE ) - end + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end end arch i386 end @@ -107,51 +106,48 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit LinuxBIOS entry code. ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + ldscript /cpu/amd/car/cache_as_ram.lds + end end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (this is where LinuxBIOS is entered). ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end end if USE_DCACHE_RAM @@ -161,7 +157,7 @@ end ## -## Include an id string (For safe flashing) +## Include an ID string (for safe flashing). ## mainboardinit southbridge/nvidia/ck804/id.inc ldscript /southbridge/nvidia/ck804/id.lds @@ -190,22 +186,22 @@ ### -### This is the early phase of linuxBIOS startup +### This is the early phase of LinuxBIOS startup. ### Things are delicate and we test to see if we should ### failover to another image. ### if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover_failover.lds - end - end + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end else - if USE_FALLBACK_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds - end - end + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end end ### @@ -230,124 +226,123 @@ config chip.h end -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_939 - device apic 0 on end - end - end +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # Socket 939 CPU + device apic 0 on end # APIC + end + end - device pci_domain 0 on - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x03f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x03f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x02f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x0378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Environment Controller - io 0x60 = 0x0290 - io 0x62 = 0x0000 - irq 0x70 = 0x00 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x0060 - io 0x62 = 0x0064 - irq 0x70 = 0x01 - irq 0x71 = 0x02 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 0x0c - irq 0x71 = 0x02 - end - device pnp 2e.7 on # GPIO config - # Set GPIO 1 & 2 - io 0x25 = 0x0000 - # Set GPIO 3 & 4 - io 0x27 = 0x2540 - # GPIO Polarity for Set 3 - io 0xb2 = 0x2100 - # GPIO Pin Internal Pull up for Set 3 - io 0xba = 0x0100 - # Simple I/O register config - io 0xc0 = 0x0000 - io 0xc2 = 0x2540 - io 0xc8 = 0x0000 - io 0xca = 0x0500 - end - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic #dimm 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic #dimm 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic #dimm 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic #dimm 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic #dimm 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic #dimm 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic #dimm 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic #dimm 1-1-1 - # device i2c 57 on end - # end - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" -# register "mac_eeprom_smbus" = "3" -# register "mac_eeprom_addr" = "0x51" - end - - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # mc0 - end # pci_domain -end # root_complex + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 0x00 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x71 = 2 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + irq 0x71 = 2 + end + device pnp 2e.7 on # GPIO config + # Set GPIO 1 & 2 + io 0x25 = 0x0000 + # Set GPIO 3 & 4 + io 0x27 = 0x2540 + # GPIO Polarity for Set 3 + io 0xb2 = 0x2100 + # GPIO Pin Internal Pull up for Set 3 + io 0xba = 0x0100 + # Simple I/O register config + io 0xc0 = 0x0000 + io 0xc2 = 0x2540 + io 0xc8 = 0x0000 + io 0xca = 0x0500 + end + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic #dimm 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic #dimm 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic #dimm 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic #dimm 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic #dimm 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic #dimm 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic #dimm 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic #dimm 1-1-1 + # device i2c 57 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI) + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 on end # PCI E 3 + device pci c.0 on end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end

1 0

[LinuxBIOS] Two more CS5530 IRQ steering questions
by Jonathan Sturges 24 Sep '07

24 Sep '07

Two additional questions about CS5530 IRQ steering: 1) Comments from Uwe Hermann and Peter Stuge have indicated that it's really better for the kernel to setup the steering registers. Why is this? It sounds like the BIOS is a good place to set these. I assume that a knowledgeable OS could change them if necessary? At the very least, it does sound like we all agree that it's OK to have LB setup the steering until Linux is fixed. 2) Question about irq_tables.c. Many of the CS5536 systems have a write_pirq_routing_table() in irq_tables.c that sets the steering registers. I'd like to be able to set the steering registers in CS5530 systems too, but I'm not a software developer and I need some help. So in src/mainboard/artecgroup/dbe61/irq_tables.c, you have: /* Set up chipset IRQ steering. */ pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA); printk_debug("%s(%08X, %04X)\n", __FUNCTION__, pciAddr, chipset_irq_map); outl(pciAddr & ~3, 0xCF8); outl(chipset_irq_map, 0xCFC);My main question with this block of code is what the two outl() calls are for. It looks like pciAddr gets the address of the 0x5c steering register, and chipset_irq_map sets the right bits to set all 4 PIRQ lines. But I'd expect to see the chipset_irq_map written to pciAddr. As an alternative, Kenji Noguchi used this code block to set the registers in a CS5530 system he's working on (posted 5-May-2007): device_t pdev; //CS5530A pdev = dev_find_slot(0, (0x12 << 3) + 0); pci_write_config8(pdev, 0x5c, 0xab); pci_write_config8(pdev, 0x5d, 0x09); This block makes more sense to me. Obviously the register values could be set by #defines, but it looks simpler to me. Bottom line is, before I implement IRQ steering for my CS5530 system, I want to understand what the first code block is doing, and if (or why) it's preferable over the 2nd code block. Any guidance is appreciated. thanks, Jonathan ____________________________________________________________________________________ Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545469

2 1

[LinuxBIOS] r2803 build service
by LinuxBIOS information 23 Sep '07

23 Sep '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2803 to the LinuxBIOS source repository and caused the following changes: Change Log: Add detection support for quite a number of SMSC Super I/Os. Also, add dump support for the SMSC DME1737 and the ASUS A8000. Random minor fixes. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2803&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2803 - trunk/util/superiotool
by svn＠openbios.org 23 Sep '07

23 Sep '07

Author: uwe Date: 2007-09-24 03:40:09 +0200 (Mon, 24 Sep 2007) New Revision: 2803 Modified: trunk/util/superiotool/ite.c trunk/util/superiotool/smsc.c trunk/util/superiotool/superiotool.h Log: Add detection support for quite a number of SMSC Super I/Os. Also, add dump support for the SMSC DME1737 and the ASUS A8000. Random minor fixes. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/ite.c =================================================================== --- trunk/util/superiotool/ite.c 2007-09-23 13:17:29 UTC (rev 2802) +++ trunk/util/superiotool/ite.c 2007-09-24 01:40:09 UTC (rev 2803) @@ -239,10 +239,7 @@ }; /** - * Enable configuration sequence (ITE uses this for newer IT87[012]xF). - * - * IT871[01]F uses 0x87, 0x87 -> Fintek detection should handle it - * IT8708F uses 0x87, 0x87 -> Fintek detection should handle it + * IT871[01]F and IT8708F use 0x87, 0x87 * IT8761F uses 0x87, 0x61, 0x55, 0x55/0xaa * IT86xxF series uses different ports * IT8661F uses 0x86, 0x61, 0x55/0xaa, 0x55/0xaa and 32 more writes Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-09-23 13:17:29 UTC (rev 2802) +++ trunk/util/superiotool/smsc.c 2007-09-24 01:40:09 UTC (rev 2803) @@ -20,9 +20,12 @@ #include "superiotool.h" -#define DEVICE_ID_REG 0x0d -#define DEVICE_REV_REG 0x0e +#define DEVICE_ID_REG_OLD 0x0d +#define DEVICE_REV_REG_OLD 0x0e +#define DEVICE_ID_REG 0x20 +#define DEVICE_REV_REG 0x21 + const static struct superio_registers reg_table[] = { {0x28, "FDC37N769", { {NOLDN, NULL, @@ -37,6 +40,82 @@ 0x80,0x00,0x3c,RSVD,RSVD,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,RSVD,0x00,0x00,0x03,0x00,0x00,EOT}}, {EOT}}}, + {0x42, "FDC37B80x", { + {EOT}}}, + {0x44, "FDC37B78x", { + {EOT}}}, + {0x4c, "FDC37B72x", { + {EOT}}}, + {0x4d, "FDC37M81x", { + {EOT}}}, + {0x47, "FDC37M60x", { + {EOT}}}, + {0x51, "LPC47B27x", { + {EOT}}}, + {0x59, "LPC47M10x", { + {EOT}}}, + {0x60, "LPC47M15x", { + {EOT}}}, + {0x62, "LPC47S45x", { + {EOT}}}, + {0x6f, "LPC47B397", { + {EOT}}}, + {0x77, "A8000", { /* ASUS A8000, a rebranded DME1737(?) */ + {NOLDN, NULL, + {0x03,0x07,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x28, + 0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {RSVD,0x00,0x77,NANA,0x00,RSVD,0x44,MISC,MISC,RSVD, + NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4, + 0xf5,EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00, + 0x00,EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x02,0x03,EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0xa, "Runtime registers", + {0x30,0x60,0x61,0x62,0x63,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,0x00,0x00,NANA,RSVD,0x04,EOT}}, + {EOT}}}, + {0x78, "DME1737", { + {NOLDN, NULL, + {0x03,0x07,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x28, + 0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {RSVD,0x00,0x77,NANA,0x00,RSVD,0x44,MISC,MISC,RSVD, + NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4, + 0xf5,EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00, + 0x00,EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x02,0x03,EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0xa, "Runtime registers", + {0x30,0x60,0x61,0x62,0x63,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,0x00,0x00,NANA,RSVD,0x04,EOT}}, + {EOT}}}, + {0x81, "SCH5307", { + {EOT}}}, {EOT} }; @@ -56,6 +135,14 @@ enter_conf_mode_smsc(port); + /* Check for older SMSC Super I/Os. */ + id = regval(port, DEVICE_ID_REG_OLD); + rev = regval(port, DEVICE_REV_REG_OLD); + + if (superio_unknown(reg_table, id)) + no_superio_found(port); + + /* Check for newer SMSC Super I/Os. */ id = regval(port, DEVICE_ID_REG); rev = regval(port, DEVICE_REV_REG); @@ -65,10 +152,11 @@ return; } - printf("Found SMSC %s (id=0x%02x, rev=0x%02x) at port=0x%x\n", - get_superio_name(reg_table, id), id, rev, port); + printf("Found %s %s (id=0x%02x, rev=0x%02x) at port=0x%x\n", + (id == 0x77 ? "ASUS" : "SMSC"), get_superio_name(reg_table, id), + id, rev, port); - dump_superio("SMSC", reg_table, port, id); + dump_superio((id == 0x77 ? "ASUS" : "SMSC"), reg_table, port, id); dump_superio_readable(port); /* TODO */ exit_conf_mode_smsc(port); Modified: trunk/util/superiotool/superiotool.h =================================================================== --- trunk/util/superiotool/superiotool.h 2007-09-23 13:17:29 UTC (rev 2802) +++ trunk/util/superiotool/superiotool.h 2007-09-24 01:40:09 UTC (rev 2803) @@ -52,7 +52,7 @@ #define LDNSIZE (MAXLDN + 3) /* Biggest LDN + 0 + NOLDN + EOT */ #define MAXNUMIDX 70 /* Maximum number of indexes */ #define IDXSIZE (MAXNUMIDX + 1) -#define MAXNUMPORTS (2 + 1) /* Maximum number of Super I/O ports */ +#define MAXNUMPORTS (4 + 1) /* Maximum number of Super I/O ports */ /* Command line parameters. */ extern int dump, dump_readable, verbose; @@ -101,11 +101,11 @@ void (*probe_idregs) (uint16_t port); int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */ } superio_ports_table[] = { - {probe_idregs_simple, {0x2e, 0x4e, EOT}}, - {probe_idregs_fintek, {0x2e, 0x4e, EOT}}, - {probe_idregs_ite, {0x2e, 0x4e, EOT}}, - {probe_idregs_smsc, {0x3f0, 0x370, EOT}}, - {probe_idregs_winbond, {0x2e, 0x4e, EOT}}, + {probe_idregs_simple, {0x2e, 0x4e, EOT}}, + {probe_idregs_fintek, {0x2e, 0x4e, EOT}}, + {probe_idregs_ite, {0x2e, 0x4e, EOT}}, + {probe_idregs_smsc, {0x2e, 0x4e, 0x3f0, 0x370, EOT}}, + {probe_idregs_winbond, {0x2e, 0x4e, EOT}}, }; #endif

1 0

← Newer
1
...
9
10
11
12
13
14
15
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot September 2007