coreboot May 2007

coreboot@coreboot.org

98 participants
436 discussions

[LinuxBIOS] linuxbios on commel lv671 board with ICH4 chipset ?
by Dieter Bloms 17 May '07

17 May '07

Hi, I own a commell lv-671 board and want to install a linuxbios, because of supporting serial console. I successfully made a qemu bios and it works as aspected From the source I see, that the i82801db and i855pm is supported. Is the i855pm compatible to i855GME ? Or does anybody have successfully build a bios for the lv-671 board ? PS.: Here is a link to the board: http://www.commell.com.tw/Product/SBC/LV-671.HTM Thank you in advance -- Best reguards Dieter -- I do not get viruses because I do not use MS software. If you use Outlook then please do not put my email address in your address-book so that WHEN you get a virus it won't use my address in the From field.

3 4

Re: [LinuxBIOS] r2666 - trunk/LinuxBIOSv2/src/mainboard/iei/nova4899r
by Peter Stuge 17 May '07

17 May '07

On Tue, May 15, 2007 at 06:55:26AM +0000, svn(a)openbios.org wrote: > const struct irq_routing_table intel_irq_routing_table = { ^^^^^ ? //Peter

3 3

[LinuxBIOS] 440bx boards
by Sam Brightman 17 May '07

17 May '07

Hi guys, I've reached acceptance that I'm never gonna have time to play with this, and so have some spare hardware that I'm hoping may be of use. It consists of 2 Asus P2B 440BX boards (with 400/450MHz PIIs, removable BIOS) and a PII 266MHz with board unknown (it's in the depths of the cupboard right now). Let me know if anyone is interested... I'm in Oxford, UK (not sure what to do about pickup/delivery...) sam -- sam brightman

3 2

[LinuxBIOS] r2672 build service
by LinuxBIOS information 17 May '07

17 May '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2672 to the LinuxBIOS source repository and caused the following changes: Change Log: Whitespace fixes (trivial). Signed-off-by: Corey Osgood <corey_osgood(a)verizon.net> Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=hdama&vendor=… Compilation of artecgroup:dbe61 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=dbe61&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=e326&vendor=i… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2672&device=dk8x&vendor=i… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] [PATCH 1/2] Add copywrite notice
by Luis Correia 17 May '07

17 May '07

Add copywrite notice to Options.lb, this fully closes issue #53 Signed-off-by: Luis Correia <luis.f.correia(a)gmail.com> ---

2 1

[LinuxBIOS] [PATCH] SPD functions refactoring
by Uwe Hermann 17 May '07

17 May '07

First off: please do _not_ apply this patch. Thanks ;-) This moves all/most generic SPD-only functions (which are not chipset-specific) into an extra spd.c file. The second step would be to merge all near-identical functions into one generic version which all chipsets can use. This is _not_ a working patch, yet, it's merely here to illustrate what I'm working on. I repeat: - This should _not_ be committed in this form. - It probably doesn't compile and breaks a ton of boards - It's not yet abuild-tested - It's not tested on real hardware - It's incomplete Preliminary comments are welcome, though... Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

3 3

Re: [LinuxBIOS] r2670 - in trunk/LinuxBIOSv2/src/mainboard: asus/p2b bitworks/ims densitron/dpx114 via/epia via/epia-m
by Stefan Reinauer 17 May '07

17 May '07

> static inline int spd_read_byte(unsigned device, unsigned address) > { > - uint8_t c; > - c = smbus_read_byte(device, address); > - return c; > + return smbus_read_byte(device, address); > } Did you compare the assembler code produced by romcc, verifying that this has no bad impact? -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

4 7

[LinuxBIOS] r2672 - trunk/LinuxBIOSv2/src/mainboard/intel/xe7501devkit
by svn＠openbios.org 17 May '07

17 May '07

Author: uwe Date: 2007-05-17 13:20:18 +0200 (Thu, 17 May 2007) New Revision: 2672 Modified: trunk/LinuxBIOSv2/src/mainboard/intel/xe7501devkit/Config.lb Log: Whitespace fixes (trivial). Signed-off-by: Corey Osgood <corey_osgood(a)verizon.net> Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/LinuxBIOSv2/src/mainboard/intel/xe7501devkit/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/intel/xe7501devkit/Config.lb 2007-05-16 06:58:15 UTC (rev 2671) +++ trunk/LinuxBIOSv2/src/mainboard/intel/xe7501devkit/Config.lb 2007-05-17 11:20:18 UTC (rev 2672) @@ -149,76 +149,76 @@ # based on sample config for tyan/s2735 chip northbridge/intel/e7501 device pci_domain 0 on - device pci 0.0 on end # Chipset host controller - device pci 0.1 on end # Host RASUM controller - device pci 2.0 on # Hub interface B - chip southbridge/intel/i82870 # P64H2 - device pci 1c.0 on end # IOAPIC - bus B - device pci 1d.0 on end # Hub to PCI-B bridge - device pci 1e.0 on end # IOAPIC - bus A - device pci 1f.0 on end # Hub to PCI-A bridge - end + device pci 0.0 on end # Chipset host controller + device pci 0.1 on end # Host RASUM controller + device pci 2.0 on # Hub interface B + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end end - device pci 3.0 off end # Hub interface C (82808AA connector - disable for now) - device pci 4.0 on # Hub interface D - chip southbridge/intel/i82870 # P64H2 - device pci 1c.0 on end # IOAPIC - bus B - device pci 1d.0 on end # Hub to PCI-B bridge - device pci 1e.0 on end # IOAPIC - bus A - device pci 1f.0 on end # Hub to PCI-A bridge - end + device pci 3.0 off end # Hub interface C (82808AA connector - disable for now) + device pci 4.0 on # Hub interface D + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end end - device pci 6.0 on end # E7501 Power management registers? (undocumented) - chip southbridge/intel/i82801ca - device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at) - device pci 1d.1 off end # USB (not populated) - device pci 1d.2 off end # USB (not populated) - device pci 1e.0 on # Hub to PCI bridge - chip drivers/pci/onboard # VGA ROM - device pci 0.0 on end - register "rom_address" = "_vgarom_start" - end - end - device pci 1f.0 on # LPC bridge + device pci 6.0 on end # E7501 Power management registers? (undocumented) + chip southbridge/intel/i82801ca + device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at) + device pci 1d.1 off end # USB (not populated) + device pci 1d.2 off end # USB (not populated) + device pci 1e.0 on # Hub to PCI bridge + chip drivers/pci/onboard # VGA ROM + device pci 0.0 on end + register "rom_address" = "_vgarom_start" + end + end + device pci 1f.0 on # LPC bridge chip superio/smsc/lpc47b272 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.a off end # ACPI - end - end - device pci 1f.1 on end # IDE - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # AC97 Audio - device pci 1f.6 off end # AC97 Modem + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a off end # ACPI + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC97 Audio + device pci 1f.6 off end # AC97 Modem end # SB end # PCI_DOMAIN - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604_533Mhz - device apic 0 on end - end - chip cpu/intel/socket_mPGA604_533Mhz - device apic 6 on end - end - end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604_533Mhz + device apic 0 on end + end + chip cpu/intel/socket_mPGA604_533Mhz + device apic 6 on end + end + end end

1 0

Re: [LinuxBIOS] How do you usually install Fedora in LinuxBIOS
by yhlu 16 May '07

16 May '07

On 5/16/07, Vincente Tsou <vincentetsou(a)nexcom.com.tw> wrote: > Hi, > > I have a problem in LinuxBIOS when install Fedora, > First ,my platform is AMD SocketF + HT2100 + HT1000 and I have a bootable > LinuxBIOS already. > It can boot into SATA HD. > But i want to install fedora core 6 into SATA HD from PXE. > When i used PXE install, my system will hang and show some error massage. > Please see attached file. > Could you help me to vertify this question,or give me some suggest? > Thanks you very much for your kindly help. you may use the SMP enabled kernel for installation. YH

2 1

[LinuxBIOS] are SST49LF016C compatible with LPC *and* FWH?
by Jeremy Jackson 16 May '07

16 May '07

I thought it was when I ordered, and I just got it working as FWH, but I'm not having much luck using it with LPC (ie CK804). It looks like IDSEL needs to be inverted among other things. I think the CK804 had 4MB rom decoded, if the code in LinuxBIOSv2 does what it says, so I don't think that's a problem any more. Suggestions? Buy LPC for LPC boards and FWH for FWH boards? Cheers, Jeremy

2 2

← Newer
1
...
18
19
20
21
22
23
24
...
44
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot May 2007