coreboot May 2007

coreboot@coreboot.org

98 participants
436 discussions

[LinuxBIOS] r2686 - trunk/LinuxBIOSv2/util/flashrom
by svn＠openbios.org 21 May '07

21 May '07

Author: uwe Date: 2007-05-21 23:39:08 +0200 (Mon, 21 May 2007) New Revision: 2686 Modified: trunk/LinuxBIOSv2/util/flashrom/README trunk/LinuxBIOSv2/util/flashrom/flash.h trunk/LinuxBIOSv2/util/flashrom/flashchips.c Log: Add support for the Winbond W39V040FA chip. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/LinuxBIOSv2/util/flashrom/README =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/README 2007-05-21 21:36:03 UTC (rev 2685) +++ trunk/LinuxBIOSv2/util/flashrom/README 2007-05-21 21:39:08 UTC (rev 2686) @@ -140,6 +140,7 @@ Winbond W49F002U Winbond W49V002A Winbond W49V002FA +Winbond W39V040FA Winbond W39V040A Winbond W39V040B Winbond W39V080A Modified: trunk/LinuxBIOSv2/util/flashrom/flash.h =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/flash.h 2007-05-21 21:36:03 UTC (rev 2685) +++ trunk/LinuxBIOSv2/util/flashrom/flash.h 2007-05-21 21:39:08 UTC (rev 2686) @@ -99,6 +99,7 @@ #define WINBOND_ID 0xDA /* Winbond */ #define W_29C011 0xC1 #define W_29C020C 0x45 +#define W_39V040FA 0x34 #define W_39V040A 0x3D #define W_39V040B 0x54 #define W_39V080A 0xD0 Modified: trunk/LinuxBIOSv2/util/flashrom/flashchips.c =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/flashchips.c 2007-05-21 21:36:03 UTC (rev 2685) +++ trunk/LinuxBIOSv2/util/flashrom/flashchips.c 2007-05-21 21:39:08 UTC (rev 2686) @@ -105,6 +105,8 @@ probe_jedec, erase_chip_jedec, write_49f002, NULL}, {"W49V002FA", WINBOND_ID, W_49V002FA, NULL, 256, 128, probe_jedec, erase_chip_jedec, write_49f002, NULL}, + {"W39V040FA", WINBOND_ID, W_39V040FA, NULL, 512, 64*1024, + probe_jedec, erase_chip_jedec, write_39sf020, NULL}, {"W39V040A", WINBOND_ID, W_39V040A, NULL, 512, 64*1024, probe_jedec, erase_chip_jedec, write_39sf020, NULL}, {"W39V040B", WINBOND_ID, W_39V040B, NULL, 512, 64*1024,

1 0

[LinuxBIOS] r2685 - in trunk/LinuxBIOSv2/src: mainboard northbridge
by svn＠openbios.org 21 May '07

21 May '07

Author: uwe Date: 2007-05-21 23:36:03 +0200 (Mon, 21 May 2007) New Revision: 2685 Removed: trunk/LinuxBIOSv2/src/mainboard/densitron/ trunk/LinuxBIOSv2/src/northbridge/transmeta/ Log: Drop the (non-working, almost non-existant) support for - the Transmeta TM5800 northbridge - the Densitron DPX114 mainboard (the only one using the TM5800) Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de>

1 0

[LinuxBIOS] r2683 build service
by LinuxBIOS information 21 May '07

21 May '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "stuge" checked in revision 2683 to the LinuxBIOS source repository and caused the following changes: Change Log: The Gigabyte m57sli-s4 board supports Rev. F CPUs. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Peter Stuge <peter(a)stuge.se> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=hdama&vendor=… Compilation of artecgroup:dbe61 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=dbe61&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=e326&vendor=i… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2683&device=dk8x&vendor=i… If something broke during this checkin please be a pain in stuge's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] [PATCH] Drop romcc stuff from Norwich board
by Uwe Hermann 21 May '07

21 May '07

As the AMD Norwich board only uses CAR, we can drop all romcc related code, correct? Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

2 2

[LinuxBIOS] r2684 - trunk/LinuxBIOSv2/src/mainboard/amd/norwich
by svn＠openbios.org 21 May '07

21 May '07

Author: uwe Date: 2007-05-21 23:33:24 +0200 (Mon, 21 May 2007) New Revision: 2684 Modified: trunk/LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb trunk/LinuxBIOSv2/src/mainboard/amd/norwich/cache_as_ram_auto.c trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c Log: Drop romcc related stuff, as this board only uses CAR. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb 2007-05-21 20:50:48 UTC (rev 2683) +++ trunk/LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb 2007-05-21 21:33:24 UTC (rev 2684) @@ -49,8 +49,8 @@ if HAVE_PIRQ_TABLE object irq_tables.o end - #object reset.o +#object reset.o if USE_DCACHE_RAM #compile cache_as_ram.c to auto.inc @@ -63,30 +63,7 @@ end - ## -## Romcc output -## -#makerule ./failover.E -# depends "$(MAINBOARD)/failover.c ./romcc" -# action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -#end -# -#makerule ./failover.inc -# depends "$(MAINBOARD)/failover.c ./romcc" -# action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -#end -# -#makerule ./auto.E -# depends "$(MAINBOARD)/auto.c option_table.h ./romcc" -# action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -#end -#makerule ./auto.inc -# depends "$(MAINBOARD)/auto.c option_table.h ./romcc" -# action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -#end - -## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc @@ -183,6 +160,5 @@ device apic 0 on end end end - end Modified: trunk/LinuxBIOSv2/src/mainboard/amd/norwich/cache_as_ram_auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/norwich/cache_as_ram_auto.c 2007-05-21 20:50:48 UTC (rev 2683) +++ trunk/LinuxBIOSv2/src/mainboard/amd/norwich/cache_as_ram_auto.c 2007-05-21 21:33:24 UTC (rev 2684) @@ -24,7 +24,6 @@ #include <device/pci_def.h> #include <arch/io.h> #include <device/pnp_def.h> -#include <arch/romcc_io.h> #include <arch/hlt.h> #include "pc80/serial.c" #include "arch/i386/lib/console.c" @@ -109,11 +108,14 @@ cs5536_early_setup(); - /* Note: must do this AFTER the early_setup! It is counting on some early - * MSR setup for CS5536. + /* Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. */ - /* cs5536_disable_internal_uart disable them for now, set them up later... */ - cs5536_setup_onchipuart(); /* if debug. real setup done in chipset init via config.lb */ + /* cs5536_disable_internal_uart: disable them for now, set them + * up later... + */ + /* If debug. real setup done in chipset init via Config.lb. */ + cs5536_setup_onchipuart(); mb_gpio_init(); uart_init(); console_init(); Modified: trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c 2007-05-21 20:50:48 UTC (rev 2683) +++ trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c 2007-05-21 21:33:24 UTC (rev 2684) @@ -3,7 +3,6 @@ #include <device/pci_def.h> #include <device/pci_ids.h> #include <arch/io.h> -#include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" static unsigned long main(unsigned long bist)

1 0

[LinuxBIOS] r2683 - trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli
by svn＠openbios.org 21 May '07

21 May '07

Author: stuge Date: 2007-05-21 22:50:48 +0200 (Mon, 21 May 2007) New Revision: 2683 Modified: trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Options.lb Log: The Gigabyte m57sli-s4 board supports Rev. F CPUs. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Options.lb 2007-05-21 18:38:29 UTC (rev 2682) +++ trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Options.lb 2007-05-21 20:50:48 UTC (rev 2683) @@ -85,6 +85,7 @@ uses HW_MEM_HOLE_SIZEK uses HW_MEM_HOLE_SIZE_AUTO_INC uses K8_HT_FREQ_1G_SUPPORT +uses K8_REV_F_SUPPORT uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE @@ -209,6 +210,9 @@ #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 +#Opteron Rev F (DDR2) support +default K8_REV_F_SUPPORT=1 + #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1

1 0

[LinuxBIOS] r2682 build service
by LinuxBIOS information 21 May '07

21 May '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "stepan" checked in revision 2682 to the LinuxBIOS source repository and caused the following changes: Change Log: fix some typos, clarify comments and drop dead code (trivial) Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=hdama&vendor=… Compilation of artecgroup:dbe61 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=dbe61&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=e326&vendor=i… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2682&device=dk8x&vendor=i… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] patch for EPIA vt8231_early_serial.c
by Ben Hewson 21 May '07

21 May '07

The code was enabling interrupts for the serial port, possibly causing random hangs on boot. I have replaced the 8250 initialisation code with that in uart8250.c Signed-off-by: Ben Hewson <ben(a)hewson-venieri.com> ---------------------------------------------------------------------------------------------------------------------- This seems to work ok for me, but I can't say for sure if it has stopped the random boot hangs, as they were/are a bit random.

2 1

[LinuxBIOS] r2681 build service
by LinuxBIOS information 21 May '07

21 May '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "stepan" checked in revision 2681 to the LinuxBIOS source repository and caused the following changes: Change Log: This is the last remainder from Yinghai's mega patch. It fixes issues with devices conflicting with the northbridge devices on PCI bus 0. Signed-off-by: Yinghai Lu <yinghailu(a)gmail.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=hdama&vendor=… Compilation of artecgroup:dbe61 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=dbe61&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=e326&vendor=i… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2681&device=dk8x&vendor=i… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2682 - trunk/LinuxBIOSv2/src/northbridge/amd/amdk8
by svn＠openbios.org 21 May '07

21 May '07

Author: stepan Date: 2007-05-21 20:38:29 +0200 (Mon, 21 May 2007) New Revision: 2682 Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c Log: fix some typos, clarify comments and drop dead code (trivial) Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c 2007-05-21 18:11:17 UTC (rev 2681) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c 2007-05-21 18:38:29 UTC (rev 2682) @@ -614,10 +614,10 @@ static int is_opteron(const struct mem_controller *ctrl) { /* Test to see if I am an Opteron. - * FIXME Testing dual channel capability is correct for now - * but a beter test is probably required. + * FIXME Socket 939 based Athlon64 have dual channel capability, + * too, so we need a better test for Opterons */ -#warning "FIXME implement a better test for opterons" +#warning "FIXME: Implement a better test for Opterons" uint32_t nbcap; nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); return !!(nbcap & NBCAP_128Bit); @@ -1202,7 +1202,7 @@ die("Mixed buffered and registered dimms not supported"); } #if 1 - //By yhlu for debug Athlon64 939 can do dual channel, but it use unbuffer DIMM + // yhlu debug: Athlon64 939 can do dual channel, but it uses unbuffered DIMMs if (unbuffered && is_opteron(ctrl)) { die("Unbuffered Dimms not supported on Opteron"); } @@ -2264,7 +2264,10 @@ hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK; #if HW_MEM_HOLE_SIZE_AUTO_INC == 1 - //We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some + /* We need to double check if hole_startk is valid. + * If it is equal to the dram base address in K (base_k), + * we need to decrease it. + */ uint32_t basek_pri; for(i=0; i<controllers; i++) { uint32_t base; @@ -2275,14 +2278,17 @@ } base_k = (base & 0xffff0000) >> 2; if(base_k == hole_startk) { - hole_startk -= (base_k - basek_pri)>>1; // decrease mem hole startk to make sure it is on middle of privous node - break; //only one hole + /* decrease memory hole startk to make sure it is + * in the middle of the previous node + */ + hole_startk -= (base_k - basek_pri)>>1; + break; /* only one hole */ } basek_pri = base_k; } #endif - //find node index that need do set hole + /* Find node number that needs the memory hole configured */ for(i=0; i<controllers; i++) { uint32_t base, limit; unsigned base_k, limit_k; @@ -2298,7 +2304,7 @@ hoist_memory(controllers, ctrl, hole_startk, i); end_k = memory_end_k(ctrl, controllers); set_top_mem(end_k, hole_startk); - break; //only one hole + break; /* only one hole */ } } @@ -2343,14 +2349,6 @@ memreset(controllers, ctrl); /* We need to wait a mimmium of 20 MEMCLKS to enable the InitDram */ -#if 0 - print_debug("prepare to InitDram:"); - for(i=0; i<100; i++) { - print_debug_hex32(i); - print_debug("\b\b\b\b\b\b\b\b"); - } - print_debug("\r\n"); -#endif for(i = 0; i < controllers; i++) { uint32_t dcl, dch; @@ -2454,34 +2452,6 @@ #endif } -static int mem_inited(int controllers, const struct mem_controller *ctrl) -{ - int i; - - unsigned mask = 0; - unsigned mask_inited = 0; - - for(i = 0; i < controllers; i++) { - uint32_t dcl; - if (!controller_present(ctrl + i)) - continue; - - mask |= (1<<i); - dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); - - if (!is_cpu_pre_c0()) { // B3 - - if( (dcl & DCL_MemClrStatus) && (dcl & DCL_DramEnable) ) { - mask_inited |= (1<<i); - } - } - } - - if(mask == mask_inited) return 1; - - return 0; - -} #if USE_DCACHE_RAM == 1 static void set_sysinfo_in_ram(unsigned val) { Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c 2007-05-21 18:11:17 UTC (rev 2681) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c 2007-05-21 18:38:29 UTC (rev 2682) @@ -670,7 +670,7 @@ { /* Test to see if I am an Opteron. * FIXME Testing dual channel capability is correct for now - * but a beter test is probably required. + * but a better test is probably required. * m2 and s1g1 support dual channel too. but only support unbuffered dimm */ #warning "FIXME implement a better test for opterons"

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
44
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot May 2007