coreboot September 2006

coreboot@coreboot.org

52 participants
173 discussions

[LinuxBIOS] r2409 build service
by LinuxBIOS information 15 Sep '06

15 Sep '06

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "rminnich" checked in revision 2409 to the LinuxBIOS source repository and caused the following changes: Change Log: Add DCON support. Build Log: Compilation of olpc:rev_a has ben broken If something broke during this checkin please be a pain in rminnich's neck until the issue is fixed. If this issue is not fixed within 24h the revision will be backed out. Yours truely, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2413 build service
by LinuxBIOS information 15 Sep '06

15 Sep '06

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "rminnich" checked in revision 2413 to the LinuxBIOS source repository and caused the following changes: Change Log: additions and mods for lzma. Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: Ronald G. Minnich Build Log: Compilation of artecgroup:dbe61 is still broken Configuration of technologic:ts5300 has ben broken If something broke during this checkin please be a pain in rminnich's neck until the issue is fixed. If this issue is not fixed within 24h the revision will be backed out. Yours truely, LinuxBIOS automatic build system

1 0

[LinuxBIOS] LB GCC-4.1.1 FILO
by steve yannalfo 14 Sep '06

14 Sep '06

Thank you Stefan, Filo-0.5 r30 fixed the problem steve __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[LinuxBIOS] r2415 - trunk/LinuxBIOSv2/src/stream
by svn＠openbios.org 14 Sep '06

14 Sep '06

Author: rminnich Date: 2006-09-14 22:08:10 +0200 (Thu, 14 Sep 2006) New Revision: 2415 Modified: trunk/LinuxBIOSv2/src/stream/rom_stream.c Log: fix stupid missing " type Signed-off-by: Ronald G. Minnich Modified: trunk/LinuxBIOSv2/src/stream/rom_stream.c =================================================================== --- trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-09-14 16:31:14 UTC (rev 2414) +++ trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-09-14 20:08:10 UTC (rev 2415) @@ -6,7 +6,7 @@ /* if they set the precompressed rom stream, they better have set a type */ #if CONFIG_PRECOMPRESSED_ROM_STREAM && ((!CONFIG_COMPRESSED_ROM_STREAM) && (!CONFIG_COMPRESSED_ROM_STREAM_NRV2B) && (!CONFIG_COMPRESSED_ROM_STREAM_LZMA)) -#error "You set CONFIG_PRECOMPRESSED_ROM_STREAM but need to set CONFIG_COMPRESSED_ROM_STREAM (implies NRV2B, deprecated) or CONFIG_COMPRESSED_ROM_STREAM_NRV2B or CONFIG_COMPRESSED_ROM_STREAM_LZMA +#error "You set CONFIG_PRECOMPRESSED_ROM_STREAM but need to set CONFIG_COMPRESSED_ROM_STREAM (implies NRV2B, deprecated) or CONFIG_COMPRESSED_ROM_STREAM_NRV2B or CONFIG_COMPRESSED_ROM_STREAM_LZMA" #endif /* If they set ANY of these, then we're compressed */

1 0

[LinuxBIOS] LB GCC-4.1.1 & Filo
by steve yannalfo 14 Sep '06

14 Sep '06

After upgrading to gcc-4.1.1 from gcc-3.4.4: not a single LB image will boot. LB is the correct size. Filo Builds. LB detects all the hardware. LB finds the kernel. LB starts to load the kernel.... then SOFT RESET. I have not changed any of my configurations & have done comparisons between gcc-3.4.1 & 4.1.1: I think it may be a problem with Filo, but I am not sure. Any Ideas? LinuxBIOS-1.1.8_mb06048_Fallback Thu Sep 14 11:57:09 EDT 2006 starting... resourcemap.c is setting up resources (0,1) link=01 (1,0) link=02 02 nodes initialized. SBLink=02 NC node|link=00 busn=40 NC node|link=02 SMBus controller enabled Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Initializing memory: done Ram4 v_esp=000cfd8c testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to ram. src=fffe0000 dst=00004000 linxbios_ram.bin length = 000240fc Jumping to LinuxBIOS. LinuxBIOS-1.1.8_mb06048_Fallback Thu Sep 14 11:57:09 EDT 2006 booting... Enumerating buses... PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI: Scanning Bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 01:00.0 [1022/7458] enabled PCI: 01:01.0 [1022/7458] enabled next_unitid: 0003 PCI: Scanning Bus 1 PCI: 01:01.0 [1022/7458] enabled PCI: 01:01.1 [1022/7459] enabled PCI: 01:02.0 [1022/7458] enabled PCI: 01:02.1 [1022/7459] enabled PCI: Scanning Bus 2 PCI: Found 2 Sub Busses PCI: 02: 133MHz PCI-X sstatus=60c3 rev=11 PCI: Scanning Bus 3 PCI: 03:01.0 [1002/4c66] enabled PCI: Found 3 Sub Busses PCI: 03: Conventional PCI sstatus=6003 rev=11 PCI: Found 3 Sub Busses PCI: 04:00.0 [10de/005e] enabled PCI: 04:00.0 [10de/005e] enabled next_unitid: 000f PCI: 04:06.0 PCI: 04:09.0 PCI: 04:0a.0 PCI: 04:0b.0 PCI: 04:0c.0 PCI: 04:0d.0 PCI: 04:0e.0 HT: Left over static devices. Check your Config.lb PCI: Scanning Bus 4 PCI: 04:00.0 [10de/005e] enabled PCI: 04:01.0 [10de/0051] enabled PCI: 04:01.1 [10de/0052] enabled PCI: 04:02.0 [10de/005a] enabled PCI: 04:02.1 [10de/005b] enabled PCI: 04:04.0 [10de/0059] enabled PCI: 04:04.1 [10de/0058] enabled PCI: 04:06.0 [10de/0053] enabled PCI: 04:07.0 [10de/0054] enabled PCI: 04:08.0 [10de/0055] enabled PCI: 04:09.0 [10de/005c] enabled PCI: 04:0a.0 [10de/0057] enabled PCI: 04:0b.0 [10de/005d] enabled PCI: 04:0c.0 [10de/005d] enabled PCI: 04:0d.0 [10de/005d] enabled PCI: 04:0e.0 [10de/005d] enabled PNP: 002e.0 disabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 enabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled smbus: PCI: 04:01.1[0]->I2C: 01:50 enabled smbus: PCI: 04:01.1[0]->I2C: 01:51 enabled PCI: Scanning Bus 5 PCI: Found 5 Sub Busses PCI: Scanning Bus 6 PCI: 06:00.0 [11ab/4360] enabled PCI: Found 6 Sub Busses PCI: Scanning Bus 7 PCI: Found 7 Sub Busses PCI: Scanning Bus 8 PCI: 08:00.0 [11ab/4360] enabled PCI: Found 8 Sub Busses PCI: Scanning Bus 9 PCI: Found 9 Sub Busses PCI: Found 9 Sub Busses PCI: Found 9 Sub Busses PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: 00:19.3 siblings=1 CPU: APIC: 02 enabled CPU: APIC: 03 enabled done Allocating resources... Reading resources... PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem PCI: 01:01.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 2 mem PCI: 04:09.0 1c <- [0x000000f000 - 0x000000efff] bus 5 io PCI: 04:09.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 5 prefmem PCI: 04:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 5 mem PCI: 04:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 6 prefmem PCI: 04:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 7 io PCI: 04:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 7 prefmem PCI: 04:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 7 mem PCI: 04:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 8 prefmem PCI: 04:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 9 io PCI: 04:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 9 prefmem PCI: 04:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 9 mem Done reading resources. Allocating VGA resource PCI: 03:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:02.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1d8 <- [0x0000006000 - 0x0000006fff] io <node 0 link 0> PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] prefmem <node 0 link 0> PCI: 00:18.0 1b0 <- [0x00fc300000 - 0x00fc4fffff] mem <node 0 link 0> PCI: 00:18.0 1d2 <- [0x0000001000 - 0x0000005fff] io <node 0 link 2> PCI: 00:18.0 1aa <- [0x00fc500000 - 0x00fc4fffff] prefmem <node 0 link 2> PCI: 00:18.0 1a2 <- [0x00fc000000 - 0x00fc2fffff] mem <node 0 link 2> PCI: 01:01.1 10 <- [0x00fc400000 - 0x00fc400fff] mem64 PCI: 01:02.0 1c <- [0x0000006000 - 0x0000006fff] bus 3 io PCI: 01:02.0 24 <- [0x00f0000000 - 0x00f7ffffff] bus 3 prefmem PCI: 01:02.0 20 <- [0x00fc300000 - 0x00fc3fffff] bus 3 mem PCI: 03:01.0 10 <- [0x00f0000000 - 0x00f7ffffff] prefmem PCI: 03:01.0 14 <- [0x0000006000 - 0x00000060ff] io PCI: 03:01.0 18 <- [0x00fc300000 - 0x00fc30ffff] mem PCI: 03:01.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem PCI: 01:02.1 10 <- [0x00fc401000 - 0x00fc401fff] mem64 PCI: 04:01.0 10 <- [0x0000004800 - 0x000000487f] io PCI: 04:01.0 14 <- [0x00fc200000 - 0x00fc200fff] mem PCI: 04:01.0 60 <- [0x0000003000 - 0x00000030ff] io PCI: 04:01.0 64 <- [0x0000003400 - 0x00000034ff] io PCI: 04:01.0 68 <- [0x0000003800 - 0x00000038ff] io PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] io PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq PCI: 04:01.1 10 <- [0x0000004c80 - 0x0000004c9f] io PCI: 04:01.1 20 <- [0x0000004c00 - 0x0000004c3f] io PCI: 04:01.1 24 <- [0x0000004c40 - 0x0000004c7f] io PCI: 04:02.0 10 <- [0x00fc201000 - 0x00fc201fff] mem PCI: 04:02.1 10 <- [0x00fc207000 - 0x00fc2070ff] mem PCI: 04:04.0 10 <- [0x0000003c00 - 0x0000003cff] io PCI: 04:04.0 14 <- [0x0000004000 - 0x00000040ff] io PCI: 04:04.0 18 <- [0x00fc202000 - 0x00fc202fff] mem PCI: 04:04.1 10 <- [0x0000004400 - 0x00000044ff] io PCI: 04:04.1 14 <- [0x0000004880 - 0x00000048ff] io PCI: 04:04.1 18 <- [0x00fc203000 - 0x00fc203fff] mem PCI: 04:06.0 20 <- [0x0000004ca0 - 0x0000004caf] io PCI: 04:07.0 10 <- [0x0000004cd0 - 0x0000004cd7] io PCI: 04:07.0 14 <- [0x0000005010 - 0x0000005013] io PCI: 04:07.0 18 <- [0x0000004ce0 - 0x0000004ce7] io PCI: 04:07.0 1c <- [0x0000005020 - 0x0000005023] io PCI: 04:07.0 20 <- [0x0000004cb0 - 0x0000004cbf] io PCI: 04:07.0 24 <- [0x00fc204000 - 0x00fc204fff] mem PCI: 04:08.0 10 <- [0x0000004cf0 - 0x0000004cf7] io PCI: 04:08.0 14 <- [0x0000005030 - 0x0000005033] io PCI: 04:08.0 18 <- [0x0000004d00 - 0x0000004d07] io PCI: 04:08.0 1c <- [0x0000005040 - 0x0000005043] io PCI: 04:08.0 20 <- [0x0000004cc0 - 0x0000004ccf] io PCI: 04:08.0 24 <- [0x00fc205000 - 0x00fc205fff] mem PCI: 04:0a.0 10 <- [0x00fc206000 - 0x00fc206fff] mem PCI: 04:0a.0 14 <- [0x0000005000 - 0x0000005007] io PCI: 04:0b.0 1c <- [0x0000001000 - 0x0000001fff] bus 6 io PCI: 04:0b.0 20 <- [0x00fc000000 - 0x00fc0fffff] bus 6 mem PCI: 06:00.0 10 <- [0x00fc020000 - 0x00fc023fff] mem64 PCI: 06:00.0 18 <- [0x0000001000 - 0x00000010ff] io PCI: 06:00.0 30 <- [0x00fc000000 - 0x00fc01ffff] romem PCI: 04:0d.0 1c <- [0x0000002000 - 0x0000002fff] bus 8 io PCI: 04:0d.0 20 <- [0x00fc100000 - 0x00fc1fffff] bus 8 mem PCI: 08:00.0 10 <- [0x00fc120000 - 0x00fc123fff] mem64 PCI: 08:00.0 18 <- [0x0000002000 - 0x00000020ff] io PCI: 08:00.0 30 <- [0x00fc100000 - 0x00fc11ffff] romem PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 140 PCI: 01:01.1 subsystem <- 1111/1111 PCI: 01:01.1 cmd <- 146 PCI: 01:02.0 bridge ctrl <- 000b PCI: 01:02.0 cmd <- 147 PCI: 03:01.0 subsystem <- 1111/1111 PCI: 03:01.0 cmd <- 1c3 PCI: 01:02.1 subsystem <- 1111/1111 PCI: 01:02.1 cmd <- 146 PCI: 04:00.0 subsystem <- 1111/1111 PCI: 04:00.0 cmd <- 146 PCI: 04:01.0 subsystem <- 1111/1111 PCI: 04:01.0 cmd <- 14f ck804 lpc decode:PNP: 002e.2, base=0x000003f8, end=0x000003ff ck804 lpc decode:PNP: 002e.3, base=0x000002f8, end=0x000002ff ck804 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 ck804 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 ck804 lpc decode:PNP: 002e.b, base=0x00000290, end=0x00000297 PCI: 04:01.1 subsystem <- 1111/1111 PCI: 04:01.1 cmd <- 141 PCI: 04:02.0 subsystem <- 1111/1111 PCI: 04:02.0 cmd <- 142 PCI: 04:02.1 subsystem <- 1111/1111 PCI: 04:02.1 cmd <- 142 PCI: 04:04.0 subsystem <- 1111/1111 PCI: 04:04.0 cmd <- 143 PCI: 04:04.1 subsystem <- 1111/1111 PCI: 04:04.1 cmd <- 143 PCI: 04:06.0 subsystem <- 1111/1111 PCI: 04:06.0 cmd <- 141 PCI: 04:07.0 subsystem <- 1111/1111 PCI: 04:07.0 cmd <- 143 PCI: 04:08.0 subsystem <- 1111/1111 PCI: 04:08.0 cmd <- 143 PCI: 04:09.0 bridge ctrl <- 0003 PCI: 04:09.0 cmd <- 140 PCI: 04:0a.0 subsystem <- 1111/1111 PCI: 04:0a.0 cmd <- 143 PCI: 04:0b.0 bridge ctrl <- 0003 PCI: 04:0b.0 cmd <- 147 PCI: 06:00.0 cmd <- 143 PCI: 04:0c.0 bridge ctrl <- 0003 PCI: 04:0c.0 cmd <- 140 PCI: 04:0d.0 bridge ctrl <- 0003 PCI: 04:0d.0 cmd <- 147 PCI: 08:00.0 cmd <- 143 PCI: 04:0e.0 bridge ctrl <- 0003 PCI: 04:0e.0 cmd <- 140 PCI: 00:18.1 subsystem <- 1111/1111 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1111/1111 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 PCI: 00:19.0 cmd <- 140 PCI: 00:19.1 subsystem <- 1111/1111 PCI: 00:19.1 cmd <- 140 PCI: 00:19.2 subsystem <- 1111/1111 PCI: 00:19.2 cmd <- 140 PCI: 00:19.3 cmd <- 140 done. Initializing devices... Root Device init PCI: 00:18.0 init PCI: 01:01.0 init PCI: 01:01.1 init PCI: 01:02.0 init PCI: 03:01.0 init rom address for PCI: 03:01.0 = fff80000 copying VGA ROM Image from 0xfff80000 to 0xc0000, 0xf000 bytes entering emulator halt_sys: file /work/bios/linuxbios/src/devices/emulator/x86emu/ops.c, line 4387 PCI: 01:02.1 init PCI: 04:01.0 init set power on after power fail RTC Init Invalid CMOS LB checksum PNP: 002e.2 init PNP: 002e.3 init PNP: 002e.5 init PNP: 002e.b init PCI: 04:02.1 init PCI: 04:07.0 init SATA S SATA P PCI: 04:08.0 init SATA S SATA P PCI: 04:06.0 init IDE1 IDE0 PCI: 04:09.0 init dev_root mem base = 0x00f0000000 [0x50] <-- 0xf0000000 PCI: 04:0a.0 init PCI: 04:0b.0 init PCI: 04:0c.0 init PCI: 04:0d.0 init PCI: 04:0e.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.1 init PCI: 00:19.2 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 265 HE Setting up local apic... apic_id: 0 done. Clearing memory 2048K - 2097152K: ------------------------------- done CPU #0 Initialized Initializing CPU #1 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 265 HE Setting up local apic... apic_id: 1 done. CPU #1 Initialized Initializing CPU #2 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 265 HE Setting up local apic... apic_id: 2 done. Clearing memory 2097152K - 5242880K: ----------------++++++++++++++++ done CPU #2 Initialized Initializing CPU #3 Waiting for 1 CPUS to stop CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 265 HE Setting up local apic... apic_id: 3 done. CPU #3 Initialized All AP CPUs stopped PCI: 06:00.0 init rom address for PCI: 06:00.0 = fc000000 Incorrect Expansion ROM Header Signature ffff PCI: 08:00.0 init rom address for PCI: 08:00.0 = fc100000 Incorrect Expansion ROM Header Signature ffff Devices initialized Writing IRQ routing tables to 0xf0000...done. BUS: 0 is 0x9e BUS: 1 is 0xa6 BUS: 2 is 0xae BUS: 3 is 0xb6 BUS: 4 is 0xbe BUS: 5 is 0xc6 BUS: 6 is 0xce BUS: 7 is 0xd6 BUS: 8 is 0xde BUS: 9 is 0xe6 BUS: 10 is 0xee BUS: 1 is 0xf6 BUS: 2 is 0xfe BUS: 3 is 0x106 IOAPIC: 4 version 0x11 @ 0xfc200000 IOAPIC: 5 version 0x11 @ 0xfc400000 IOAPIC: 6 version 0x11 @ 0xfc401000 Mapping: 4:1.1 -> apic 4, irq 10 Mapping: 4:2.0 -> apic 4, irq 21 Mapping: 4:2.1 -> apic 4, irq 20 Mapping: 4:4.0 -> apic 4, irq 20 Mapping: 4:4.1 -> apic 4, irq 22 Mapping: 4:7.0 -> apic 4, irq 23 Mapping: 4:8.0 -> apic 4, irq 22 Mapping: 4:10.0 -> apic 4, irq 21 Mapping: 5:0.0 -> apic 4, irq 16 Mapping: 5:0.1 -> apic 4, irq 17 Mapping: 5:0.2 -> apic 4, irq 18 Mapping: 5:0.3 -> apic 4, irq 19 Mapping: 6:0.0 -> apic 4, irq 17 Mapping: 6:0.1 -> apic 4, irq 18 Mapping: 6:0.2 -> apic 4, irq 19 Mapping: 6:0.3 -> apic 4, irq 16 Mapping: 7:0.0 -> apic 4, irq 16 Mapping: 7:0.1 -> apic 4, irq 17 Mapping: 7:0.2 -> apic 4, irq 18 Mapping: 7:0.3 -> apic 4, irq 19 Mapping: 8:0.0 -> apic 4, irq 19 Mapping: 8:0.1 -> apic 4, irq 16 Mapping: 8:0.2 -> apic 4, irq 17 Mapping: 8:0.3 -> apic 4, irq 18 Mapping: 9:0.0 -> apic 4, irq 18 Mapping: 9:0.1 -> apic 4, irq 19 Mapping: 9:0.2 -> apic 4, irq 16 Mapping: 9:0.3 -> apic 4, irq 17 Mapping: 2:1.0 -> apic 5, irq 0 Mapping: 2:1.1 -> apic 5, irq 1 Mapping: 2:1.2 -> apic 5, irq 2 Mapping: 2:1.3 -> apic 5, irq 3 Mapping: 3:1.0 -> apic 6, irq 0 Mapping: 3:1.1 -> apic 6, irq 1 Mapping: 3:1.2 -> apic 6, irq 2 Mapping: 3:1.3 -> apic 6, irq 3 Mapping: 10:0.0 -> apic 4, irq 0 Mapping: 10:0.1 -> apic 4, irq 1 Mapping: 10:0.0 -> apic 4, irq 2 Mapping: 10:0.3 -> apic 4, irq 3 Mapping: 10:1.0 -> apic 4, irq 4 Mapping: 10:1.2 -> apic 4, irq 6 Mapping: 10:1.3 -> apic 4, irq 7 Mapping: 10:2.0 -> apic 4, irq 8 Mapping: 10:3.0 -> apic 4, irq 12 Mapping: 10:3.1 -> apic 4, irq 13 Mapping: 10:3.2 -> apic 4, irq 14 Mapping: 10:3.3 -> apic 4, irq 15 Mapping: 10:0.0 -> apic 255, irq 0 Mapping: 10:0.0 -> apic 255, irq 1 Wrote the mp table end at: 00000020 - 000002b4 Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 000009f8 checksum 42f7 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candiate at offset 0 New segment addr 0x100000 size 0x215c0 offset 0xe0 filesize 0x7608 (cleaned up) New segment addr 0x100000 size 0x215c0 offset 0xe0 filesize 0x7608 New segment addr 0x1215c0 size 0x48 offset 0x7700 filesize 0x48 (cleaned up) New segment addr 0x1215c0 size 0x48 offset 0x7700 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000000215c0 filesz: 0x0000000000007608 Clearing Segment: addr: 0x0000000000107608 memsz: 0x0000000000019fb8 Loading Segment: addr: 0x00000000001215c0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x10557c FILO version 0.5 (administrator@sky_bolt) Thu Sep 14 11:56:44 EDT 2006 Press <Enter> for default boot, or <Esc> for boot prompt... boot: hde3:/boot/vmlinuz initrd=hde3:/boot/initramfs-genkernel-x86_64-2.6.15-gentoo-r7 real_root=/dev/sda3 pci=nommconf ro console=tty0 cons0 find_ide_controller: found PCI IDE controller 10de:0054 prog_if=0x85 find_ide_controller: primary channel: native PCI mode find_ide_controller: cmd_base=0x4cd0 ctrl_base=0x5010 ide_software_reset: Waiting for ide2 to become ready for reset... ok init_drive: Testing for hde init_drive: Probing for hde init_drive: LBA mode, sectors=78140160 init_drive: LBA48 mode, sectors=78140160 init_drive: Init device params... ok hde: LBA48 40GB: FUJITSU MHT2040BH init_drive: Testing for hdf init_drive: Probing for hdf print_status: IDE: status=0x0, err=0x0 init_drive: Testing for hdf init_drive: Probing for hdf print_status: IDE: status=0x0, err=0x0 Mounted ext2fs Found Linux version 2.6.15-gentoo-r7 (root@localhost) #6 SMP PREEMPT Wed Jun 21 16:40:43 EDT 2006 bzImage. Loading kernel... ok Jumping to entry point... INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... LinuxBIOS-1.1.8_mb06048_Fallback Thu Sep 14 11:57:09 EDT 2006 starting... TIA steve --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

3 2

[LinuxBIOS] r2414 - trunk/LinuxBIOSv2/src/arch/i386
by svn＠openbios.org 14 Sep '06

14 Sep '06

Author: rminnich Date: 2006-09-14 18:31:14 +0200 (Thu, 14 Sep 2006) New Revision: 2414 Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb Log: fix some really yuck stuff. now things might work. Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-09-14 15:12:36 UTC (rev 2413) +++ trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-09-14 16:31:14 UTC (rev 2414) @@ -1,4 +1,5 @@ uses CONFIG_SMP +uses CONFIG_PRECOMPRESSED_ROM_STREAM uses CONFIG_USE_INIT init init/crt0.S.lb @@ -34,10 +35,24 @@ action "lzma e $(PAYLOAD) $@" end + +# this one example shows the mess that has occurred. People are now mixing +# conditional if in the make style with if in the config language style. +# The -1 is linux standard. +# I don't much like it but it is the mode nowadays. So linuxbios will change +# what a mess. -- RGM +# catch the case where there is no compression makedefine PAYLOAD-1:=payload + +# match the case where a compression type is specified. makedefine PAYLOAD-$(CONFIG_COMPRESSED_ROM_STREAM_NRV2B):=payload.nrv2b makedefine PAYLOAD-$(CONFIG_COMPRESSED_ROM_STREAM_LZMA):=payload.lzma +# catch the case where there is precompression. Yes, this bites. +if CONFIG_PRECOMPRESSED_ROM_STREAM + makedefine PAYLOAD-1:=payload +end + makerule linuxbios.rom depends "linuxbios.strip buildrom $(PAYLOAD-1)" action "./buildrom $< $@ $(PAYLOAD-1) $(ROM_IMAGE_SIZE) $(ROM_SECTION_SIZE)"

1 0

[LinuxBIOS] Is LinuxBIOS Linux-ready? ;-)
by Stefan Reinauer 14 Sep '06

14 Sep '06

Hi, intel provides a firmware developer kit that allows firmware developers to find out whether the firmware is Linux-ready: http://www.linuxfirmwarekit.org/ Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/

1 0

[LinuxBIOS] r2413 - in trunk/LinuxBIOSv2: src/arch/i386 src/config src/lib src/mainboard/amd/rumba src/mainboard/artecgroup/dbe61 src/mainboard/olpc/rev_a src/mainboard/technologic/ts5300 src/mainboard/via/epia-m src/stream targets/artecgroup/dbe61 targets/olpc/rev_a
by svn＠openbios.org 14 Sep '06

14 Sep '06

Author: rminnich Date: 2006-09-14 17:12:36 +0200 (Thu, 14 Sep 2006) New Revision: 2413 Added: trunk/LinuxBIOSv2/src/lib/lzma.c trunk/LinuxBIOSv2/src/lib/lzmadecode.c trunk/LinuxBIOSv2/src/lib/lzmadecode.h Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb trunk/LinuxBIOSv2/src/config/Options.lb trunk/LinuxBIOSv2/src/lib/nrv2b.c trunk/LinuxBIOSv2/src/mainboard/amd/rumba/Options.lb trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Options.lb trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb trunk/LinuxBIOSv2/src/mainboard/via/epia-m/Options.lb trunk/LinuxBIOSv2/src/stream/rom_stream.c trunk/LinuxBIOSv2/targets/artecgroup/dbe61/Config.lb trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.1M.lb trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.SPI.lb trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb Log: additions and mods for lzma. Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: Ronald G. Minnich Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -28,8 +28,15 @@ action "./nrv2b e $(PAYLOAD) $@" end +# unlike nrv2b, lzma is a huge build mess. If they want lzma, they have to have built it +makerule payload.lzma + depends "$(PAYLOAD) " + action "lzma e $(PAYLOAD) $@" +end + makedefine PAYLOAD-1:=payload -makedefine PAYLOAD-$(CONFIG_COMPRESSED_ROM_STREAM):=payload.nrv2b +makedefine PAYLOAD-$(CONFIG_COMPRESSED_ROM_STREAM_NRV2B):=payload.nrv2b +makedefine PAYLOAD-$(CONFIG_COMPRESSED_ROM_STREAM_LZMA):=payload.lzma makerule linuxbios.rom depends "linuxbios.strip buildrom $(PAYLOAD-1)" Modified: trunk/LinuxBIOSv2/src/config/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/config/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/config/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -572,8 +572,18 @@ define CONFIG_COMPRESSED_ROM_STREAM default 0 export always - comment "compressed boot image is located in ROM" + comment "compressed boot image is located in ROM and is assumed to be NRV2B (deprecated)" end +define CONFIG_COMPRESSED_ROM_STREAM_NRV2B + default 0 + export always + comment "NRV2B compressed boot image is located in ROM" +end +define CONFIG_COMPRESSED_ROM_STREAM_LZMA + default 0 + export always + comment "LZMA compressed boot image is located in ROM" +end define CONFIG_PRECOMPRESSED_ROM_STREAM default 0 export always Added: trunk/LinuxBIOSv2/src/lib/lzma.c =================================================================== --- trunk/LinuxBIOSv2/src/lib/lzma.c (rev 0) +++ trunk/LinuxBIOSv2/src/lib/lzma.c 2006-09-14 15:12:36 UTC (rev 2413) @@ -0,0 +1,39 @@ +/* + +LinuxBIOS interface to memory-saving variant of LZMA decoder +(C)opyright 2006 Carl-Daniel Hailfinger +Released under the GNU GPL + +*/ + +#include "lzmadecode.c" + + +static unsigned long ulzma(unsigned char * src, unsigned char * dst) +{ + unsigned char properties[LZMA_PROPERTIES_SIZE]; + UInt32 outSize; + SizeT inProcessed; + SizeT outProcessed; + int res; + CLzmaDecoderState state; + SizeT mallocneeds; + unsigned char scratchpad[15980]; + + memcpy(properties, src, LZMA_PROPERTIES_SIZE); + outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); + if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) { + printk_warning("Incorrect stream properties\n"); + } + mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); + if (mallocneeds > 15980) { + printk_warning("Decoder scratchpad too small!\n"); + } + state.Probs = (CProb *)scratchpad; + res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, (SizeT)0xffffffff, &inProcessed, + dst, outSize, &outProcessed); + if (res != 0) { + printk_warning("Decoding error = %d\n", res); + } + return outSize; +} Added: trunk/LinuxBIOSv2/src/lib/lzmadecode.c =================================================================== --- trunk/LinuxBIOSv2/src/lib/lzmadecode.c (rev 0) +++ trunk/LinuxBIOSv2/src/lib/lzmadecode.c 2006-09-14 15:12:36 UTC (rev 2413) @@ -0,0 +1,398 @@ +/* + LzmaDecode.c + LZMA Decoder (optimized for Speed version) + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this Code, expressly permits you to + statically or dynamically link your Code (or bind by name) to the + interfaces of this file without subjecting your linked Code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "lzmadecode.h" + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +#define RC_READ_BYTE (*Buffer++) + +#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ + { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} + + +#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } + +#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 + + +#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } + +#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) +#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; +#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; + +#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ + { UpdateBit0(p); mi <<= 1; A0; } else \ + { UpdateBit1(p); mi = (mi + mi) + 1; A1; } + +#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) + +#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ + { int i = numLevels; res = 1; \ + do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ + res -= (1 << numLevels); } + + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + + +#define kNumStates 12 +#define kNumLitStates 7 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) +{ + unsigned char prop0; + if (size < LZMA_PROPERTIES_SIZE) + return LZMA_RESULT_DATA_ERROR; + prop0 = propsData[0]; + if (prop0 >= (9 * 5 * 5)) + return LZMA_RESULT_DATA_ERROR; + { + for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); + for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); + propsRes->lc = prop0; + /* + unsigned char remainder = (unsigned char)(prop0 / 9); + propsRes->lc = prop0 % 9; + propsRes->pb = remainder / 5; + propsRes->lp = remainder % 5; + */ + } + + return LZMA_RESULT_OK; +} + +#define kLzmaStreamWasFinishedId (-1) + +int LzmaDecode(CLzmaDecoderState *vs, + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) +{ + CProb *p = vs->Probs; + SizeT nowPos = 0; + Byte previousByte = 0; + UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; + UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; + int lc = vs->Properties.lc; + + + int state = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + int len = 0; + const Byte *Buffer; + const Byte *BufferLim; + UInt32 Range; + UInt32 Code; + + *inSizeProcessed = 0; + *outSizeProcessed = 0; + + { + UInt32 i; + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + } + + RC_INIT(inStream, inSize); + + + while(nowPos < outSize) + { + CProb *prob; + UInt32 bound; + int posState = (int)( + (nowPos + ) + & posStateMask); + + prob = p + IsMatch + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + int symbol = 1; + UpdateBit0(prob) + prob = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state >= kNumLitStates) + { + int matchByte; + matchByte = outStream[nowPos - rep0]; + do + { + int bit; + CProb *probLit; + matchByte <<= 1; + bit = (matchByte & 0x100); + probLit = prob + 0x100 + bit + symbol; + RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) + } + while (symbol < 0x100); + } + while (symbol < 0x100) + { + CProb *probLit = prob + symbol; + RC_GET_BIT(probLit, symbol) + } + previousByte = (Byte)symbol; + + outStream[nowPos++] = previousByte; + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + } + else + { + UpdateBit1(prob); + prob = p + IsRep + state; + IfBit0(prob) + { + UpdateBit0(prob); + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < kNumLitStates ? 0 : 3; + prob = p + LenCoder; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG0 + state; + IfBit0(prob) + { + UpdateBit0(prob); + prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + UpdateBit0(prob); + + if (nowPos == 0) + return LZMA_RESULT_DATA_ERROR; + + state = state < kNumLitStates ? 9 : 11; + previousByte = outStream[nowPos - rep0]; + outStream[nowPos++] = previousByte; + + continue; + } + else + { + UpdateBit1(prob); + } + } + else + { + UInt32 distance; + UpdateBit1(prob); + prob = p + IsRepG1 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep1; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG2 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep2; + } + else + { + UpdateBit1(prob); + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state = state < kNumLitStates ? 8 : 11; + prob = p + RepLenCoder; + } + { + int numBits, offset; + CProb *probLen = prob + LenChoice; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + numBits = kLenNumLowBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenChoice2; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + numBits = kLenNumMidBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + numBits = kLenNumHighBits; + } + } + RangeDecoderBitTreeDecode(probLen, numBits, len); + len += offset; + } + + if (state < 4) + { + int posSlot; + state += kNumLitStates; + prob = p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits); + RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = (2 | ((UInt32)posSlot & 1)); + if (posSlot < kEndPosModelIndex) + { + rep0 <<= numDirectBits; + prob = p + SpecPos + rep0 - posSlot - 1; + } + else + { + numDirectBits -= kNumAlignBits; + do + { + RC_NORMALIZE + Range >>= 1; + rep0 <<= 1; + if (Code >= Range) + { + Code -= Range; + rep0 |= 1; + } + } + while (--numDirectBits != 0); + prob = p + Align; + rep0 <<= kNumAlignBits; + numDirectBits = kNumAlignBits; + } + { + int i = 1; + int mi = 1; + do + { + CProb *prob3 = prob + mi; + RC_GET_BIT2(prob3, mi, ; , rep0 |= i); + i <<= 1; + } + while(--numDirectBits != 0); + } + } + else + rep0 = posSlot; + if (++rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = kLzmaStreamWasFinishedId; + break; + } + } + + len += kMatchMinLen; + if (rep0 > nowPos) + return LZMA_RESULT_DATA_ERROR; + + + do + { + previousByte = outStream[nowPos - rep0]; + len--; + outStream[nowPos++] = previousByte; + } + while(len != 0 && nowPos < outSize); + } + } + RC_NORMALIZE; + + + *inSizeProcessed = (SizeT)(Buffer - inStream); + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} Added: trunk/LinuxBIOSv2/src/lib/lzmadecode.h =================================================================== --- trunk/LinuxBIOSv2/src/lib/lzmadecode.h (rev 0) +++ trunk/LinuxBIOSv2/src/lib/lzmadecode.h 2006-09-14 15:12:36 UTC (rev 2413) @@ -0,0 +1,67 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +typedef unsigned char Byte; +typedef unsigned short UInt16; +typedef unsigned int UInt32; +typedef UInt32 SizeT; + +#define CProb UInt16 + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 + + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LZMA_PROPERTIES_SIZE 5 + +typedef struct _CLzmaProperties +{ + int lc; + int lp; + int pb; +}CLzmaProperties; + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); + +#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) + +#define kLzmaNeedInitId (-2) + +typedef struct _CLzmaDecoderState +{ + CLzmaProperties Properties; + CProb *Probs; + + +} CLzmaDecoderState; + + +int LzmaDecode(CLzmaDecoderState *vs, + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); + +#endif Modified: trunk/LinuxBIOSv2/src/lib/nrv2b.c =================================================================== --- trunk/LinuxBIOSv2/src/lib/nrv2b.c 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/lib/nrv2b.c 2006-09-14 15:12:36 UTC (rev 2413) @@ -35,7 +35,7 @@ uint32_t bb = 0; unsigned bc = 0; const uint8_t *m_pos; - unsigned long file_len = *(unsigned long *) src; +// unsigned long file_len = *(unsigned long *) src; // we only have printk_debug in copy_and_run.c if CONFIG_USE_INIT is // not set, so comment it out. Modified: trunk/LinuxBIOSv2/src/mainboard/amd/rumba/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/rumba/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/mainboard/amd/rumba/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -21,7 +21,7 @@ uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_STREAM_START -uses CONFIG_COMPRESSED_ROM_STREAM +uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE Modified: trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -21,7 +21,7 @@ uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_STREAM_START -uses CONFIG_COMPRESSED_ROM_STREAM +uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE Modified: trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -21,7 +21,8 @@ uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_STREAM_START -uses CONFIG_COMPRESSED_ROM_STREAM +uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B +uses CONFIG_COMPRESSED_ROM_STREAM_LZMA uses CONFIG_PRECOMPRESSED_ROM_STREAM uses PAYLOAD_SIZE uses _ROMBASE Modified: trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/mainboard/technologic/ts5300/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -6,7 +6,7 @@ uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE uses CONFIG_COMPRESS -uses CONFIG_COMPRESSED_ROM_STREAM +uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B uses CONFIG_ROM_STREAM uses CONFIG_USE_INIT uses IRQ_SLOT_COUNT Modified: trunk/LinuxBIOSv2/src/mainboard/via/epia-m/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/via/epia-m/Options.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/mainboard/via/epia-m/Options.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -21,7 +21,7 @@ uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_STREAM_START -uses CONFIG_COMPRESSED_ROM_STREAM +uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE Modified: trunk/LinuxBIOSv2/src/stream/rom_stream.c =================================================================== --- trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-09-14 15:12:36 UTC (rev 2413) @@ -4,12 +4,32 @@ #include <stream/read_bytes.h> #include <string.h> -#if CONFIG_COMPRESSED_ROM_STREAM || CONFIG_PRECOMPRESSED_ROM_STREAM +/* if they set the precompressed rom stream, they better have set a type */ +#if CONFIG_PRECOMPRESSED_ROM_STREAM && ((!CONFIG_COMPRESSED_ROM_STREAM) && (!CONFIG_COMPRESSED_ROM_STREAM_NRV2B) && (!CONFIG_COMPRESSED_ROM_STREAM_LZMA)) +#error "You set CONFIG_PRECOMPRESSED_ROM_STREAM but need to set CONFIG_COMPRESSED_ROM_STREAM (implies NRV2B, deprecated) or CONFIG_COMPRESSED_ROM_STREAM_NRV2B or CONFIG_COMPRESSED_ROM_STREAM_LZMA +#endif + +/* If they set ANY of these, then we're compressed */ +#if ((CONFIG_COMPRESSED_ROM_STREAM) || (CONFIG_COMPRESSED_ROM_STREAM_NRV2B) || (CONFIG_COMPRESSED_ROM_STREAM_LZMA)) +#define UNCOMPRESSER 1 +extern unsigned char _heap, _eheap; +#endif + +#if (CONFIG_COMPRESSED_ROM_STREAM) || (CONFIG_COMPRESSED_ROM_STREAM_NRV2B) +#define HAVE_UNCOMPRESSER 1 // include generic nrv2b #include "../lib/nrv2b.c" -extern unsigned char _heap, _eheap; #endif +#if (CONFIG_COMPRESSED_ROM_STREAM_LZMA) +#if HAVE_UNCOMPRESSER +#error "You're defining more than one compression type, which is not allowed (of course)" +#endif +#define HAVE_UNCOMPRESSER 1 +// include generic nrv2b +#include "../lib/lzma.c" +#endif + #ifndef CONFIG_ROM_STREAM_START #define CONFIG_ROM_STREAM_START 0xffff0000UL #endif @@ -29,9 +49,21 @@ static const unsigned char *rom; +#if UNCOMPRESSER +unsigned long +uncompress(uint8_t * rom_start, uint8_t *dest ) +{ +#if (CONFIG_COMPRESSED_ROM_STREAM) || (CONFIG_COMPRESSED_ROM_STREAM_NRV2B) + return unrv2b(rom_start, dest); +#endif +#if (CONFIG_COMPRESSED_ROM_STREAM_LZMA) + return ulzma(rom_start, dest); +#endif +} +#endif int stream_init(void) { -#if CONFIG_COMPRESSED_ROM_STREAM || CONFIG_PRECOMPRESSED_ROM_STREAM +#if (UNCOMPRESSER) unsigned char *dest; unsigned long olen; #endif @@ -40,7 +72,7 @@ (unsigned long)rom_start, (unsigned long)rom_end); -#if CONFIG_COMPRESSED_ROM_STREAM || CONFIG_PRECOMPRESSED_ROM_STREAM +#if (UNCOMPRESSER) dest = &_eheap; /* need a good address on RAM */ @@ -56,8 +88,13 @@ } #endif + /* ALL of those settings are too smart and also unsafe. Set the dest to 16 MB: + * known to be safe for LB for now, and mostly safe for all elf images we have tried. + * long term, this has got to be fixed. + */ + dest = (unsigned char *) (16 * 1024 * 1024); printk_debug("Uncompressing to RAM 0x%08lx ", dest); - olen = unrv2b((uint8_t *) rom_start, (uint8_t *)dest ); + olen = uncompress((uint8_t *) rom_start, (uint8_t *)dest ); printk_debug(" olen = 0x%08lx done.\n", olen); rom_end = dest + olen - 1; rom = dest; Modified: trunk/LinuxBIOSv2/targets/artecgroup/dbe61/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/artecgroup/dbe61/Config.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/targets/artecgroup/dbe61/Config.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -3,7 +3,7 @@ target dbe61 mainboard artecgroup/dbe61 -option CONFIG_COMPRESSED_ROM_STREAM=0 +option CONFIG_COMPRESSED_ROM_STREAM_NRV2B=0 ## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use ## (normal AND fallback images and payloads). Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.1M.lb =================================================================== --- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.1M.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.1M.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -4,7 +4,7 @@ mainboard olpc/rev_a # Don't let LinuxBIOS compress the payload -# option CONFIG_COMPRESSED_ROM_STREAM=0 +# option CONFIG_COMPRESSED_ROM_STREAM_NRV2B=0 #option CONFIG_PRECOMPRESSED_ROM_STREAM=1 # leave 64k for vsa Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.SPI.lb =================================================================== --- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.SPI.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.SPI.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -4,8 +4,9 @@ mainboard olpc/rev_a # Don't let LinuxBIOS compress the payload -# option CONFIG_COMPRESSED_ROM_STREAM=0 -#option CONFIG_PRECOMPRESSED_ROM_STREAM=1 +#option CONFIG_COMPRESSED_ROM_STREAM_NRV2B=0 +#option CONFIG_COMPRESSED_ROM_STREAM_LZMA=1 +#option CONFIG_PRECOMPRESSED_ROM_STREAM=0 # leave 64k for vsa and 64k for EC code option ROM_SIZE=(1024*1024)-(64*1024)-(64*1024) Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb 2006-09-13 21:59:09 UTC (rev 2412) +++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb 2006-09-14 15:12:36 UTC (rev 2413) @@ -4,7 +4,7 @@ mainboard olpc/rev_a # leave 64k for vsa -option CONFIG_COMPRESSED_ROM_STREAM=0 +option CONFIG_COMPRESSED_ROM_STREAM_NRV2B=0 option ROM_SIZE=512*1024-64*1024 option FALLBACK_SIZE=ROM_SIZE

1 0

Re: [LinuxBIOS] (fwd) Re: USB bootloader
by yhlu 14 Sep '06

14 Sep '06

Are you using normal BIOS instead of LinuxBIOS? YH On 9/10/06, Al Boldi <a1426z(a)gawab.com> wrote: > yhlu wrote: > > http://www.linuxbios.org/index.php/Etherboot > > Success! Thanks a lot! > > This info should probably be in the README. > > The following flags in src/arch/i386/Config are critical for a normal bios: > CFLAGS+= -DPCBIOS > #CFLAGS+= -DLINUXBIOS > CFLAGS+= -DCONFIG_PCI_DIRECT > CFLAGS+= -DCONSOLE_DIRECT_VGA > #filo is for some reason dependent on serial; will hang otherwise > CFLAGS+= -DCONSOLE_SERIAL -DCOMCONSOLE=0x3f8 > #don't uncomment this one; will slow down display on fast machines (P4) > #CFLAGS+= -DCOMPRESERVE > > Confirmed boot for filo.zelf, filo.zlilo, filo.zrom on UHCI i440bx/zx, i810, > and VIA. > > There is one thing though, it only boots on a second try after detecting the > USB-device, like this: > > boot: uda1:/vmlinuz > LinuxLabs USB bootloader > New USB device, setting address 2 (repeats 1-forever times, until > usb-device pulled) > boot: uda1:/vmlinuz > LinuxLabs USB bootloader > (...now boots ok @ 100kb/s ...) > > Any easy way to fix this? > > > Thanks again! > > -- > Al > > > > > YH > > > > On 9/9/06, Al Boldi <a1426z(a)gawab.com> wrote: > > > yhlu wrote: > > > > you need to use filo.zelf > > > > > > same reboot with filo.zelf. > > > > > > See attached Config, compiled with gcc4.0.1 RHEL4 > > > > > > > > > Thanks! > > > > > > -- > > > Al > > > > > > > On 9/8/06, Al Boldi <a1426z(a)gawab.com> wrote: > > > > > yhlu wrote: > > > > > > did you try filo on Etherboot? > > > > > > > > > > > > I remember I first tried out on UHCI, and then added OHCI support. > > > > > > > > > > Yes, but filo.zlilo on etherboot5.4.2 just reboots on initial > > > > > loading. > > > > > > > > > > Filo 0.5 from openbios.org works fine with ide but not usb. > > > > > > > > > > Also, the i440bx board has a UHCI controller. > > > > > > > > > > > > > > > Thanks for looking into this! > > > > > > > > > > -- > > > > > Al > > > > > > > > > > > YH > > > > > > > > > > > > On 9/7/06, Stefan Reinauer <stepan(a)coresystems.de> wrote: > > > > > > > Hi, > > > > > > > > > > > > > > anyone has an idea on this one? > > > > > > > > > > > > > > ----- Forwarded message from Al Boldi ----- > > > > > > > > > > > > > > Date: Thu, 7 Sep 2006 13:52:28 +0300 > > > > > > > From: Al Boldi <a1426z(a)gawab.com> > > > > > > > To: Stefan Reinauer <stepan(a)coresystems.de> > > > > > > > Cc: openbios(a)lists.openbios.org, > > > > > > > etherboot-discuss(a)lists.sourceforge.net Subject: Re: USB > > > > > > > bootloader > > > > > > > > > > > > > > > > > > > > > Thanks for your response! > > > > > > > > > > > > > > Stefan Reinauer wrote: > > > > > > > > * Al Boldi <a1426z(a)gawab.com> [060904 20:58]: > > > > > > > > > FILO version 0.5 .... > > > > > > > > > Can't get memory map from firmware. Using hardcoded > > > > > > > > > default. Press ... > > > > > > > > > boot: uda1:/vmlinuz > > > > > > > > > LinuxLabs USB bootloader > > > > > > > > > New USB device, setting address 2 (repeats 1-4 times) > > > > > > > > > boot: uda1:/vmlinuz > > > > > > > > > LinuxLabs USB bootloader > > > > > > > > > Out of heap space > > > > > > > > > > > > > > > > Please try increasing the heap space in i386/ldscript by > > > > > > > > changing the following lines: > > > > > > > > /* 16KB heap and stack */ > > > > > > > > HEAP_SIZE = 16384; > > > > > > > > to > > > > > > > > /* 32KB heap and 16K stack */ > > > > > > > > HEAP_SIZE = 32768; > > > > > > > > > > > > > > > > > And, how can filo 0.5 be fixed to boot USB? > > > > > > > > > > > > > > > > If the message stays, try all the way up to 262144. > > > > > > > > > > > > > > Ok, the message is gone, but it still does not boot. > > > > > > > > > > > > > > Turning on debug repeats this: > > > > > > > > > > > > > > FILO version 0.5 (root@localhost) Thu Sep 7 13:40:13 AST 2006 > > > > > > > collect_sys_info: boot eax = 0x0 > > > > > > > collect_sys_info: boot ebx = 0x0 > > > > > > > collect_sys_info: boot arg = 0xfeee330 > > > > > > > collect_elfboot_info: Bootloader: Etherboot > > > > > > > collect_elfboot_info: Version: 5.4.1 > > > > > > > malloc_diag: alloc: 0 bytes (0 blocks), free: 262136 bytes (1 > > > > > > > blocks) malloc_diag: alloc: 16 bytes (1 blocks), free: 262120 > > > > > > > bytes (1 blocks) collect_elfboot_info: Image name: > > > > > > > /tftpboot/boot/pxelinux.0 malloc_diag: alloc: 32 bytes (2 > > > > > > > blocks), free: 262104 bytes (1 blocks) collect_linuxbios_info: > > > > > > > Searching for LinuxBIOS tables... > > > > > > > Can't get memory map from firmware. Using hardcoded default. > > > > > > > malloc_diag: alloc: 72 bytes (3 blocks), free: 262064 bytes (1 > > > > > > > blocks) collect_sys_info: 0000000000000000-00000000000a0000 > > > > > > > collect_sys_info: 0000000000100000-0000000002000000 > > > > > > > collect_sys_info: RAM 32 MB > > > > > > > relocate: Current location: 0x100000-0x16d827 > > > > > > > relocate: Relocating to 0x1f927d0-0x1fffff7... ok > > > > > > > setup_timers: CPU 413 MHz > > > > > > > pci_init: Scanning PCI: found 9 devices > > > > > > > malloc_diag: alloc: 192 bytes (4 blocks), free: 261944 bytes (1 > > > > > > > blocks) pci_init: 00:00.0 8086:7120 0600 00 > > > > > > > pci_init: 00:01.0 8086:7121 0300 00 > > > > > > > pci_init: 00:1e.0 8086:2418 0604 00 > > > > > > > pci_init: 01:04.0 1282:9102 0200 00 > > > > > > > pci_init: 01:05.0 10ec:8139 0200 00 > > > > > > > pci_init: 01:0a.0 1191:8040 0100 00 > > > > > > > pci_init: 00:1f.0 8086:2410 0601 00 > > > > > > > pci_init: 00:1f.1 8086:2411 0101 80 > > > > > > > pci_init: 00:1f.2 8086:2412 0c03 00 > > > > > > > > > > > > > > boot: uda1:/vmlinuz > > > > > > > malloc_diag: alloc: 216 bytes (5 blocks), free: 261920 bytes (1 > > > > > > > blocks) malloc_diag: alloc: 232 bytes (6 blocks), free: 261904 > > > > > > > bytes (1 blocks) file_open: dev=uda1, path=/vmlinuz > > > > > > > LinuxLabs USB bootloader > > > > > > > uhc_init: Found UHCI at ffffd000 > > > > > > > uhc_reset: Resetting UHCI > > > > > > > uhc_init: uhc_init setting framelist to: 01e927d0 > > > > > > > uhc_start: Starting UHCI > > > > > > > dump_uhci: HCI at ffffd000 > > > > > > > malloc_diag: alloc: 8432 bytes (7 blocks), free: 253704 bytes (1 > > > > > > > blocks) init_framelist: frame_list is at 12a000 > > > > > > > dump_link: frame_list_link: addr: 00125850 > > > > > > > dump_link: frame_list_link: raw addr: 1fb8020 > > > > > > > dump_link: frame_list_link: terminate: 0 > > > > > > > dump_link: frame_list_link: queue: 1 > > > > > > > dump_link: frame_list_link: depth: 0 > > > > > > > malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes > > > > > > > (1 blocks) poll_usb: poll_usb1 i=0 poll_u_root_hub1 v=00001083 > > > > > > > poll_u_root_hub2 v=00001083 poll_u_root_hub21 v=00001083 > > > > > > > Connection on port d010 New USB device, setting address 2 > > > > > > > uhci_control_msg: uhci_control_msg: request_type = 0 request = 5 > > > > > > > wLength=0 malloc_diag: alloc: 15616 bytes (9 blocks), free: > > > > > > > 246520 bytes (1 blocks) dump_uhci: HCI at ffffd000 > > > > > > > dump_td: failed_transaction: TD(0011d860): > > > > > > > dump_td: failed_transaction: type: SETUP > > > > > > > dump_td: failed_transaction: retries: 3 > > > > > > > dump_td: failed_transaction: IOC > > > > > > > dump_td: failed_transaction: active: 0001 > > > > > > > dump_td: failed_transaction: device_addr: 00 > > > > > > > dump_td: failed_transaction: endpoint: 0 > > > > > > > dump_td: failed_transaction: data_toggle: 0 > > > > > > > dump_td: failed_transaction: max_transfer: 7 > > > > > > > dump_td: failed_transaction: actual: 0 > > > > > > > dump_td: failed_transaction: link: > > > > > > > dump_link: failed_transaction: addr: 0011d880 > > > > > > > dump_link: failed_transaction: raw addr: 1fb0050 > > > > > > > dump_link: failed_transaction: terminate: 0 > > > > > > > dump_link: failed_transaction: queue: 0 > > > > > > > dump_link: failed_transaction: depth: 0 > > > > > > > dump_td: failed_transaction: TD(0011d880): > > > > > > > dump_td: failed_transaction: type: IN > > > > > > > dump_td: failed_transaction: retries: 0 > > > > > > > dump_td: failed_transaction: active: 0001 > > > > > > > dump_td: failed_transaction: device_addr: 00 > > > > > > > dump_td: failed_transaction: endpoint: 0 > > > > > > > dump_td: failed_transaction: data_toggle: 1 > > > > > > > dump_td: failed_transaction: max_transfer: 7ff > > > > > > > dump_td: failed_transaction: actual: 0 > > > > > > > dump_td: failed_transaction: link: > > > > > > > dump_link: failed_transaction: addr: fe16d830 > > > > > > > dump_link: failed_transaction: raw addr: 0000 > > > > > > > dump_link: failed_transaction: terminate: 1 > > > > > > > dump_link: failed_transaction: queue: 0 > > > > > > > dump_link: failed_transaction: depth: 0 > > > > > > > malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes > > > > > > > (1 blocks) configure_device: configure_device: set_address > > > > > > > failed! > > > > > > > > > > > > > > poll_u_root_hub: poll_u_root_hub1 v=00001080 poll_usb1 i=0 > > > > > > > poll_u_root_hub1 v=00001083 poll_u_root_hub2 v=00001083 > > > > > > > poll_u_root_hub21 v=00001083 Connection on port d010 > > > > > > > New USB device, setting address 2 > > > > > > > uhci_control_msg: uhci_control_msg: request_type = 0 request = 5 > > > > > > > wLength=0 malloc_diag: alloc: 15616 bytes (9 blocks), free: > > > > > > > 246520 bytes (1 blocks) dump_uhci: HCI at ffffd000 > > > > > > > dump_td: failed_transaction: TD(0011d860): > > > > > > > dump_td: failed_transaction: type: SETUP > > > > > > > dump_td: failed_transaction: retries: 3 > > > > > > > dump_td: failed_transaction: IOC > > > > > > > dump_td: failed_transaction: active: 0001 > > > > > > > dump_td: failed_transaction: device_addr: 00 > > > > > > > dump_td: failed_transaction: endpoint: 0 > > > > > > > dump_td: failed_transaction: data_toggle: 0 > > > > > > > dump_td: failed_transaction: max_transfer: 7 > > > > > > > dump_td: failed_transaction: actual: 0 > > > > > > > dump_td: failed_transaction: link: > > > > > > > dump_link: failed_transaction: addr: 0011d880 > > > > > > > dump_link: failed_transaction: raw addr: 1fb0050 > > > > > > > dump_link: failed_transaction: terminate: 0 > > > > > > > dump_link: failed_transaction: queue: 0 > > > > > > > dump_link: failed_transaction: depth: 0 > > > > > > > dump_td: failed_transaction: TD(0011d880): > > > > > > > dump_td: failed_transaction: type: IN > > > > > > > dump_td: failed_transaction: retries: 0 > > > > > > > dump_td: failed_transaction: active: 0001 > > > > > > > dump_td: failed_transaction: device_addr: 00 > > > > > > > dump_td: failed_transaction: endpoint: 0 > > > > > > > dump_td: failed_transaction: data_toggle: 1 > > > > > > > dump_td: failed_transaction: max_transfer: 7ff > > > > > > > dump_td: failed_transaction: actual: 0 > > > > > > > dump_td: failed_transaction: link: > > > > > > > dump_link: failed_transaction: addr: fe16d830 > > > > > > > dump_link: failed_transaction: raw addr: 0000 > > > > > > > dump_link: failed_transaction: terminate: 1 > > > > > > > dump_link: failed_transaction: queue: 0 > > > > > > > dump_link: failed_transaction: depth: 0 > > > > > > > malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes > > > > > > > (1 blocks) configure_device: configure_device: set_address > > > > > > > failed! > > > > > > > > > > > > > > (...repeats...) > > > > > > > > > > > > > > > > > > > > > Thanks again! > > > > > > > > > > > > > > -- > > > > > > > Al > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- End forwarded message ----- > > > > > > > > > > > > > > -- > > > > > > > coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. > > > > > > > Tel.: +49 761 7668825 • Fax: +49 761 7664613 > > > > > > > Email: info(a)coresystems.de • http://www.coresystems.de/ > > > > > > > > > > > > > > -- > > > > > > > linuxbios mailing list > > > > > > > linuxbios(a)linuxbios.org > > > > > > > http://www.openbios.org/mailman/listinfo/linuxbios > >

4 9

[LinuxBIOS] Two problems
by ROHIT VENKATACHALAM 14 Sep '06

14 Sep '06

Hi, I am having two problems with LinuxBIOS. 1. I have an ATI 3D Rage Pro onboard video rom. I have got the vgabios rom for it. I cat it with linuxbios.rom and produce the final linuxbios image. During execution, after entering the x86 emulator, there is a message saying - halt_sys:/home/rohit/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c line 2136 but the execution of LinuxBIOS continues and nothing is seen on the monitor. Whats the problem? 2. I am using FILO in Etherboot to boot linux already stored in a SATA disk. But I am getting the following message - No Drive detected on IDE Channel 2 What could be the problem? Please reply ASAP. Regards, Rohit.

3 2

← Newer
1
...
8
9
10
11
12
13
14
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot September 2006