coreboot December 2002

coreboot@coreboot.org

45 participants
68 discussions

RE: VGA and LinuxBios
by Steve M. Gehlbach 12 Dec '02

12 Dec '02

> I am working on getting the sis 530 working which on my Arbor PIA-671 > board has a 630 3D AGP card I would mainly like to use for my project. > So if you can send me the code to enable the VGA stuff that would be > great. I do have the datasheet for the board and its video controller > so I may be able to find the "special chip specific" stuff from looking > at your code. > > Thanks in advance, > -- > Nathanael Noblet I'll just tar up all the files that relate to what I was doing and email them to you. The code base is as of about August; I haven't updated lately. The motherboard I am using is a pcchips 787cl+. Also, one thing I was working on is a graphics splash or logo screen, that holds for a few seconds at startup. The linuxbios logo is great, is there a larger version of this, suitable for 640x480 display? -Steve

1 0

LinuxBIOS and Vxworks
by Felix Radensky 11 Dec '02

11 Dec '02

Hi, folks We have a custom board based on 440LX chipset and successfully use LinuxBIOS to boot linux kernel. In the near future we'll have VxWorks on the same hardware platform. It would be very nice to have LinuxBIOS booting this OS as well. Do you think this is possible ? Any hints or pointers would be very much appreciated. TIA. Felix.

8 16

Re: file system error (fwd)
by Ronald G. Minnich 11 Dec '02

11 Dec '02

any ideas? ron ---------- Forwarded message ---------- Date: Fri, 29 Nov 2002 15:35:52 +0900 From: Munjun Kang <malas(a)pinetron.com> To: Ronald G. Minnich <rminnich(a)lanl.gov> Subject: Re: file system error Thanks for your reply. I tried as your suggest. dd if=/dev/zero of=/dev/hda bs=1024 count=10000 ~ 100000 Segmentation fault's are occured in random by count. and then, turn off the UDMA feature by hdparm option. But, I can see same symptom. In this time, I tried to attach SCSI & IEEE1394 SBP-2 devices. case1. Adaptec 2930 SCSI adapter + 8GB Seagate SCSI HDD case2. IEEE1394 Interface card + external IEEE1394 HDD both cases show the same problem. Now, I think it's not a DMA problem. I'm in the maze. hmmmm...... Is there any clear hint? ----- Original Message ----- From: "Ronald G. Minnich" <rminnich(a)lanl.gov> To: "Munjun Kang" <malas(a)pinetron.com> Cc: <linuxbios(a)clustermatic.org> Sent: Thursday, November 28, 2002 12:55 AM Subject: Re: file system error > can you try a few things: > - do a raw dd command to the disk from /dev/zero and see if that works, > e.g. dd if=/dev/zero of=/dev/hda > > - turn off UDMA, in fact turn off ALL dma at first > - try to make it run totally PIO > > This is weird, but it does seem like some kind of DMA problem. > > Also, boot under the normal bios and do an lspci -xxx and then do an lspci > -xxx under linuxbios and see if you see any IDE setup differences. > > ron >

7 35

LinuxBIOS on my system.
by sivakumar 10 Dec '02

10 Dec '02

Hi, PLEASE IGNORE THE ATTACHMENT !! I trying to bring up my System with LinuxBIOS.My machine configuration is as follow: MainBoard: vc15. NorthBridge: Intel 845 MCH Southbridge: INtel 82801BA SuperIO: SMSC LPC47M192. I have modified the linuxBIOS to support these component as per their specification. I build the Image also. When started the system with the new image, I am getting following lines only through serial output: Welcome to minicom 2.00.0 OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n Compiled on Feb 26 2002, 09:38:06. Press CTRL-A Z for help on special keys LinuxBIOS-1.0.0 Sat Oct 26 14:32:26 IST 2002 starting... LinuxBIOS-1.0.0 Sat Oct 26 14:32:26 IST 2002 starting... After that nothing is happening. Can any one help me in proceeding further. Thanks, Siva.s -- sivakumar <sivakumar.subramani(a)wipro.com> wipro

3 4

[FAQ] The Open Source Stackable PC BIOS
by Adam Sulmicki 09 Dec '02

09 Dec '02

Hello, I have updated the FAQ with various comments from "Booting from floppy" thread. Comments on FAQ welcome. http://www.eax.com/ADLO-FAQ.html This FAQ does not intend to duplicate LinuxBIOS FAQ but rather give a bird view of the various BIOS projects and give someone new to the BIOS projects better idea what's it about and why someone would want to do this. In this release: new question * Q10: What is what? heavily updated * Q3: So is this accomplishment just art for art's sake? updated question * Q6: So when can I expect to see it in commerical motherboards? -- Adam Sulmicki http://www.eax.com The Supreme Headquarters of the 32 bit registers

1 0

Fast starts...
by Nathanael Noblet 09 Dec '02

09 Dec '02

Hello, I've been following the discussion on the "Booting from floppy" thread. Someone said that there are better ways to get fast starts, like the DoC and CF IDE and what not. I'm still thinking that you're going to be waiting for the typical BIOS to run its course. So what were they referring to? something like XIP type CF or what? -- Nathanael Noblet Gnat Solutions 4604 Monterey Ave NW Calgary, AB T3B 5K4 T/F 403.288.5360 C 403.809.5368 http://www.gnat.ca/

4 3

more fun with gcc 3.2
by Ronald G. Minnich 09 Dec '02

09 Dec '02

I just fixed ANOTHER PIRQ problem with gcc 3.2 Erik Hendriks has been pointing out to me that this usage of [] looks shaky, and my reaction was "Yeah, but I don't want to fix it" and also "Yeah, but it's in C99!". So I hoped not to have to fix it -- it's supposed to work. Well, now I've had to. Gcc was generating bad code for the PIRQ table for this one case. The symptom was that it failed to put in the first intializer for the slots. Then everything else went to pieces. So I have made the following changes to the pirq_routing.h file: If IRQ_SLOT_COUNT is defined, then slots are declared as follows: struct irq_info slots[IRQ_SLOT_COUNT]; otherwise it reverts to the original declaration for GCC 2.0: struct irq_info slots[0]; And for 3.0 you get the C99 version: struct irq_info slots[]; To use this, you set the IRQ_SLOT_COUNT. SO, for example, in the mainboard irq_tables.c for the supermicro p4dpr: #define IRQ_SLOT_COUNT 24 #include <arch.pirq_routing.h> Then, down below, have exactly that many struct initializations. Less magic, less bugs, more happy users :-) ron p.s. Erik and Greg, I don't want to hear it :-) Yeah, yeah, yeah, you're right :-)

1 0

pci_ids.h
by Ronald G. Minnich 09 Dec '02

09 Dec '02

I have merged in the latest 2.4.19 pci_ids.h with the linuxbios version. In the process I found they have changed and deleted some names. I have put the linuxbios-specific names at the end of the file bracketed by a comment pair to show they are linuxbios-specific. Your builds should be fine. If they break due to a problem with pci_ids.h please let me know. I needed to update for some newer chips that were not in the linuxbios pci_ids.h. thanks ron

1 0

problem in gunzip kernel!
by Terry B. Chen 09 Dec '02

09 Dec '02

I met problem in gunzip my linux kernel: The message in serial console is : January 2000, James Hendricks, Dale Webster, and Ron Minnich. Version 0.1 203:init_bytes() - zkernel_start:0xfff80000 zkernel_mask:0x0000ffff Searching for 16 byte tags 64:rom_read_bytes() - overflowed source buffer. max_block = 7 init_bytes found 0 tags Gunzip setup gunzip_setup output data is 0x00100000 Gunzipping boot code bad gzip magic numbers I think we may have error in zkernel_start address or there is a Tag in linux kernel we must do something? Best Regards Terry Chen

3 2

Build failure!
by Russell Gower 09 Dec '02

09 Dec '02

After cvs updating this afternoon, i'm now unable to build the winfast-flash.config it fails with the attached error. I suspect this could be todo with the modification made for gcc 3. or i might be completely wrong. I would appreciate some help with this one. Also is there an example of what i need to do to boot from IDE. Thanks Russell ICQ 4186920

3 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot December 2002