New patch to review for coreboot: d8b1d2b FrontRunner/Toucan-AF: lower SPI speed to 22 MHz

[Jens Rottmann]

Jens Rottmann ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2605

-gerrit

commit d8b1d2b09194cf5c48d08f76da91df9d36e58efa
Author: Jens Rottmann 
Date:   Thu Mar 7 19:02:15 2013 +0100

FrontRunner/Toucan-AF: lower SPI speed to 22 MHz

The Hudson-E1's default SPI speed for normal i.e. non-fast reads is 66 MHz,
    but the SST 25VF032B datasheet allows max. 25.  Lower the speed to 22 MHz,
    otherwise BIOS flashing fails.

Change-Id: I22e87d833a3ebd316b6e873595a2480831533ab1
    Signed-off-by: Jens Rottmann 
---
 src/mainboard/lippert/frontrunner-af/mainboard.c | 5 +++++
 src/mainboard/lippert/toucan-af/mainboard.c      | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c
index 83c90f3..72f2793 100644
--- a/src/mainboard/lippert/frontrunner-af/mainboard.c
+++ b/src/mainboard/lippert/frontrunner-af/mainboard.c
@@ -87,6 +87,7 @@ static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)

static void init(struct device *dev)
 {
+	volatile u8 *spi_base;	// base addr of Hudson's SPI host controller
    int i;
    printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);

@@ -123,6 +124,10 @@ static void init(struct device *dev)
    	outb((u8)val, SIO_RUNTIME_BASE + (val >> 8));
    }

+	/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
+	spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0);
+	spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
+
    /* Notify the SMC we're alive and kicking, or after a while it will
     * effect a power cycle and switch to the alternate BIOS chip.
     * Should be done as late as possible. */
diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c
index 27952fa..367397e 100644
--- a/src/mainboard/lippert/toucan-af/mainboard.c
+++ b/src/mainboard/lippert/toucan-af/mainboard.c
@@ -56,6 +56,7 @@ static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)

static void init(struct device *dev)
 {
+	volatile u8 *spi_base;	// base addr of Hudson's SPI host controller
    int i;
    printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);

@@ -90,6 +91,10 @@ static void init(struct device *dev)
    printk(BIOS_INFO, "Board revision ID: %u\n",
           fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));

+	/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
+	spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0);
+	spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
+
    /* Notify the SMC we're alive and kicking, or after a while it will
     * effect a power cycle and switch to the alternate BIOS chip.
     * Should be done as late as possible. */