Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/997
-gerrit
commit 8b5a0838ff0493f76a6c107dd332ca4112c1753c Author: Stefan Reinauer reinauer@chromium.org Date: Thu May 10 11:27:32 2012 -0700
Add SPI flash driver
This driver is taken from u-boot and adapted to match coreboot. It still contains some hacks and is ICH specific at places.
Change-Id: I97dd8096f7db3b62f8f4f4e4d08bdee10d88f689 Signed-off-by: Patrick Georgi patrick@georgi-clan.de --- src/Kconfig | 7 + src/drivers/Kconfig | 1 + src/drivers/Makefile.inc | 1 + src/drivers/spi/Kconfig | 81 ++++ src/drivers/spi/Makefile.inc | 12 + src/drivers/spi/eon.c | 161 +++++++ src/drivers/spi/macronix.c | 220 +++++++++ src/drivers/spi/spansion.c | 241 ++++++++++ src/drivers/spi/spi_flash.c | 309 ++++++++++++ src/drivers/spi/spi_flash_internal.h | 81 ++++ src/drivers/spi/sst.c | 268 +++++++++++ src/drivers/spi/stmicro.c | 250 ++++++++++ src/drivers/spi/winbond.c | 218 +++++++++ src/include/device/pci_ids.h | 4 + src/include/spi.h | 203 ++++++++ src/include/spi_flash.h | 91 ++++ src/southbridge/intel/bd82x6x/Kconfig | 2 + src/southbridge/intel/bd82x6x/Makefile.inc | 2 + src/southbridge/intel/bd82x6x/spi.c | 699 ++++++++++++++++++++++++++++ 19 files changed, 2851 insertions(+), 0 deletions(-)
diff --git a/src/Kconfig b/src/Kconfig index a6b09dc..a5a0f00 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -946,6 +946,13 @@ config DEBUG_TPM help This option enables additional TPM related debug messages.
+config DEBUG_SPI_FLASH + bool "Output verbose SPI flash debug messages" + default n + depends on SPI_FLASH + help + This option enables additional SPI flash related debug messages. + if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8 # Only visible with the right southbridge and loglevel. config DEBUG_INTEL_ME diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig index 259bc29..60e5b65 100644 --- a/src/drivers/Kconfig +++ b/src/drivers/Kconfig @@ -26,3 +26,4 @@ source src/drivers/oxford/Kconfig source src/drivers/sil/Kconfig source src/drivers/trident/Kconfig source src/drivers/ics/Kconfig +source src/drivers/spi/Kconfig diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc index 5f6dadf..851a4df 100644 --- a/src/drivers/Makefile.inc +++ b/src/drivers/Makefile.inc @@ -26,4 +26,5 @@ subdirs-y += oxford subdirs-y += sil subdirs-y += trident subdirs-y += ics +subdirs-y += spi subdirs-$(CONFIG_ARCH_X86) += pc80 diff --git a/src/drivers/spi/Kconfig b/src/drivers/spi/Kconfig new file mode 100644 index 0000000..ee7584c --- /dev/null +++ b/src/drivers/spi/Kconfig @@ -0,0 +1,81 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 The Chromium OS Authors. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SPI_FLASH + bool + default n + help + Select this option if your chipset driver needs to store certain + data in the SPI flash. + +config SPI_FLASH_EON + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by EON. + +config SPI_FLASH_MACRONIX + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by Macronix. + +config SPI_FLASH_SPANSION + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by Spansion. + +config SPI_FLASH_SST + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by SST. + +config SPI_FLASH_STMICRO + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by ST MICRO. + +config SPI_FLASH_WINBOND + bool + default y + depends on SPI_FLASH + help + Select this option if your chipset driver needs to store certain + data in the SPI flash and your SPI flash is made by Winbond. + +config SPI_FLASH_NO_FAST_READ + bool + default n + depends on SPI_FLASH + help + Select this option if your setup requires to avoid "fast read"s + from the SPI flash parts. diff --git a/src/drivers/spi/Makefile.inc b/src/drivers/spi/Makefile.inc new file mode 100644 index 0000000..1814e80 --- /dev/null +++ b/src/drivers/spi/Makefile.inc @@ -0,0 +1,12 @@ +# SPI flash driver interface +ramstage-$(CONFIG_SPI_FLASH) += spi_flash.c + +# drivers +ramstage-$(CONFIG_SPI_FLASH_EON) += eon.c +ramstage-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.c +ramstage-$(CONFIG_SPI_FLASH_SPANSION) += spansion.c +ramstage-$(CONFIG_SPI_FLASH_SST) += sst.c +ramstage-$(CONFIG_SPI_FLASH_STMICRO) += stmicro.c +ramstage-$(CONFIG_SPI_FLASH_WINBOND) += winbond.c +ramstage-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.c + diff --git a/src/drivers/spi/eon.c b/src/drivers/spi/eon.c new file mode 100644 index 0000000..4056953 --- /dev/null +++ b/src/drivers/spi/eon.c @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2010, ucRobotics Inc. + * Author: Chong Huang chuang@ucrobotics.com + * Licensed under the GPL-2 or later. + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +/* EN25Q128-specific commands */ +#define CMD_EN25Q128_WREN 0x06 /* Write Enable */ +#define CMD_EN25Q128_WRDI 0x04 /* Write Disable */ +#define CMD_EN25Q128_RDSR 0x05 /* Read Status Register */ +#define CMD_EN25Q128_WRSR 0x01 /* Write Status Register */ +#define CMD_EN25Q128_READ 0x03 /* Read Data Bytes */ +#define CMD_EN25Q128_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_EN25Q128_PP 0x02 /* Page Program */ +#define CMD_EN25Q128_SE 0x20 /* Sector Erase */ +#define CMD_EN25Q128_BE 0xd8 /* Block Erase */ +#define CMD_EN25Q128_DP 0xb9 /* Deep Power-down */ +#define CMD_EN25Q128_RES 0xab /* Release from DP, and Read Signature */ + +#define EON_ID_EN25Q128 0x18 + +struct eon_spi_flash_params { + u8 idcode1; + u16 page_size; + u16 pages_per_sector; + u16 sectors_per_block; + u16 nr_sectors; + const char *name; +}; + +/* spi_flash needs to be first so upper layers can free() it */ +struct eon_spi_flash { + struct spi_flash flash; + const struct eon_spi_flash_params *params; +}; + +static inline struct eon_spi_flash *to_eon_spi_flash(struct spi_flash *flash) +{ + return container_of(flash, struct eon_spi_flash, flash); +} + +static const struct eon_spi_flash_params eon_spi_flash_table[] = { + { + .idcode1 = EON_ID_EN25Q128, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_sectors = 4096, + .name = "EN25Q128", + }, +}; + +static int eon_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct eon_spi_flash *eon = to_eon_spi_flash(flash); + unsigned long page_addr; + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = eon->params->page_size; + page_addr = offset / page_size; + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_EN25Q128_PP; + cmd[1] = page_addr >> 8; + cmd[2] = page_addr; + cmd[3] = byte_addr; + + printk(BIOS_SPEW, + "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zd\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "SF: EON Page Program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + page_addr++; + byte_addr = 0; + } + + printk(BIOS_INFO, "SF: EON: Successfully programmed %zu bytes @ 0x%x\n", + len, offset); + + spi_release_bus(flash->spi); + return ret; +} + +static int eon_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_EN25Q128_BE, offset, len); +} + +struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) +{ + const struct eon_spi_flash_params *params; + struct eon_spi_flash *eon; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) { + params = &eon_spi_flash_table[i]; + if (params->idcode1 == idcode[2]) + break; + } + + if (i == ARRAY_SIZE(eon_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported EON ID %02x\n", idcode[1]); + return NULL; + } + + eon = malloc(sizeof(*eon)); + if (!eon) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + eon->params = params; + eon->flash.spi = spi; + eon->flash.name = params->name; + + eon->flash.write = eon_write; + eon->flash.erase = eon_erase; + eon->flash.read = spi_flash_cmd_read_fast; + eon->flash.sector_size = params->page_size * params->pages_per_sector + * params->sectors_per_block; + eon->flash.size = params->page_size * params->pages_per_sector + * params->nr_sectors; + + return &eon->flash; +} diff --git a/src/drivers/spi/macronix.c b/src/drivers/spi/macronix.c new file mode 100644 index 0000000..130e746 --- /dev/null +++ b/src/drivers/spi/macronix.c @@ -0,0 +1,220 @@ +/* + * Copyright 2009(C) Marvell International Ltd. and its affiliates + * Prafulla Wadaskar prafulla@marvell.com + * + * Based on drivers/mtd/spi/stmicro.c + * + * Copyright 2008, Network Appliance Inc. + * Jason McMullan mcmullan@netapp.com + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +/* MX25xx-specific commands */ +#define CMD_MX25XX_WREN 0x06 /* Write Enable */ +#define CMD_MX25XX_WRDI 0x04 /* Write Disable */ +#define CMD_MX25XX_RDSR 0x05 /* Read Status Register */ +#define CMD_MX25XX_WRSR 0x01 /* Write Status Register */ +#define CMD_MX25XX_READ 0x03 /* Read Data Bytes */ +#define CMD_MX25XX_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_MX25XX_PP 0x02 /* Page Program */ +#define CMD_MX25XX_SE 0x20 /* Sector Erase */ +#define CMD_MX25XX_BE 0xD8 /* Block Erase */ +#define CMD_MX25XX_CE 0xc7 /* Chip Erase */ +#define CMD_MX25XX_DP 0xb9 /* Deep Power-down */ +#define CMD_MX25XX_RES 0xab /* Release from DP, and Read Signature */ + +#define MACRONIX_SR_WIP (1 << 0) /* Write-in-Progress */ + +struct macronix_spi_flash_params { + u16 idcode; + u16 page_size; + u16 pages_per_sector; + u16 sectors_per_block; + u16 nr_blocks; + const char *name; +}; + +struct macronix_spi_flash { + struct spi_flash flash; + const struct macronix_spi_flash_params *params; +}; + +static inline struct macronix_spi_flash *to_macronix_spi_flash(struct spi_flash + *flash) +{ + return container_of(flash, struct macronix_spi_flash, flash); +} + +static const struct macronix_spi_flash_params macronix_spi_flash_table[] = { + { + .idcode = 0x2015, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 32, + .name = "MX25L1605D", + }, + { + .idcode = 0x2016, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 64, + .name = "MX25L3205D", + }, + { + .idcode = 0x2017, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 128, + .name = "MX25L6405D", + }, + { + .idcode = 0x2018, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 256, + .name = "MX25L12805D", + }, + { + .idcode = 0x2618, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 256, + .name = "MX25L12855E", + }, +}; + +static int macronix_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct macronix_spi_flash *mcx = to_macronix_spi_flash(flash); + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = min(mcx->params->page_size, CONTROLLER_PAGE_LIMIT); + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_MX25XX_PP; + cmd[1] = (offset >> 16) & 0xff; + cmd[2] = (offset >> 8) & 0xff; + cmd[3] = offset & 0xff; + + printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zd\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_MX25XX_WREN, NULL, 0); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Macronix Page Program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + offset += chunk_len; + byte_addr = 0; + } + + printk(BIOS_INFO, "SF: Macronix: Successfully programmed %zu bytes @ 0x%lx\n", + len, offset - len); + + spi_release_bus(flash->spi); + return ret; +} + +static int macronix_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_MX25XX_SE, offset, len); +} + +struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode) +{ + const struct macronix_spi_flash_params *params; + struct macronix_spi_flash *mcx; + unsigned int i; + u16 id = idcode[2] | idcode[1] << 8; + + for (i = 0; i < ARRAY_SIZE(macronix_spi_flash_table); i++) { + params = ¯onix_spi_flash_table[i]; + if (params->idcode == id) + break; + } + + if (i == ARRAY_SIZE(macronix_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported Macronix ID %04x\n", id); + return NULL; + } + + mcx = malloc(sizeof(*mcx)); + if (!mcx) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + mcx->params = params; + mcx->flash.spi = spi; + mcx->flash.name = params->name; + + mcx->flash.write = macronix_write; + mcx->flash.erase = macronix_erase; +#ifdef CONFIG_SPI_FLASH_NO_FAST_READ + mcx->flash.read = spi_flash_cmd_read_slow; +#else + mcx->flash.read = spi_flash_cmd_read_fast; +#endif + mcx->flash.sector_size = params->page_size * params->pages_per_sector; + mcx->flash.size = mcx->flash.sector_size * params->sectors_per_block * + params->nr_blocks; + + return &mcx->flash; +} diff --git a/src/drivers/spi/spansion.c b/src/drivers/spi/spansion.c new file mode 100644 index 0000000..a4f370a --- /dev/null +++ b/src/drivers/spi/spansion.c @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2009 Freescale Semiconductor, Inc. + * + * Author: Mingkai Hu (Mingkai.hu@freescale.com) + * Based on stmicro.c by Wolfgang Denk (wd@denx.de), + * TsiChung Liew (Tsi-Chung.Liew@freescale.com), + * and Jason McMullan (mcmullan@netapp.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +/* S25FLxx-specific commands */ +#define CMD_S25FLXX_READ 0x03 /* Read Data Bytes */ +#define CMD_S25FLXX_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_S25FLXX_READID 0x90 /* Read Manufacture ID and Device ID */ +#define CMD_S25FLXX_WREN 0x06 /* Write Enable */ +#define CMD_S25FLXX_WRDI 0x04 /* Write Disable */ +#define CMD_S25FLXX_RDSR 0x05 /* Read Status Register */ +#define CMD_S25FLXX_WRSR 0x01 /* Write Status Register */ +#define CMD_S25FLXX_PP 0x02 /* Page Program */ +#define CMD_S25FLXX_SE 0xd8 /* Sector Erase */ +#define CMD_S25FLXX_BE 0xc7 /* Bulk Erase */ +#define CMD_S25FLXX_DP 0xb9 /* Deep Power-down */ +#define CMD_S25FLXX_RES 0xab /* Release from DP, and Read Signature */ + +#define SPSN_ID_S25FL008A 0x0213 +#define SPSN_ID_S25FL016A 0x0214 +#define SPSN_ID_S25FL032A 0x0215 +#define SPSN_ID_S25FL064A 0x0216 +#define SPSN_ID_S25FL128P 0x2018 +#define SPSN_EXT_ID_S25FL128P_256KB 0x0300 +#define SPSN_EXT_ID_S25FL128P_64KB 0x0301 +#define SPSN_EXT_ID_S25FL032P 0x4d00 + +struct spansion_spi_flash_params { + u16 idcode1; + u16 idcode2; + u16 page_size; + u16 pages_per_sector; + u16 nr_sectors; + const char *name; +}; + +struct spansion_spi_flash { + struct spi_flash flash; + const struct spansion_spi_flash_params *params; +}; + +static inline struct spansion_spi_flash *to_spansion_spi_flash(struct spi_flash + *flash) +{ + return container_of(flash, struct spansion_spi_flash, flash); +} + +static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { + { + .idcode1 = SPSN_ID_S25FL008A, + .idcode2 = 0, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 16, + .name = "S25FL008A", + }, + { + .idcode1 = SPSN_ID_S25FL016A, + .idcode2 = 0, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 32, + .name = "S25FL016A", + }, + { + .idcode1 = SPSN_ID_S25FL032A, + .idcode2 = 0, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 64, + .name = "S25FL032A", + }, + { + .idcode1 = SPSN_ID_S25FL064A, + .idcode2 = 0, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 128, + .name = "S25FL064A", + }, + { + .idcode1 = SPSN_ID_S25FL128P, + .idcode2 = SPSN_EXT_ID_S25FL128P_64KB, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 256, + .name = "S25FL128P_64K", + }, + { + .idcode1 = SPSN_ID_S25FL128P, + .idcode2 = SPSN_EXT_ID_S25FL128P_256KB, + .page_size = 256, + .pages_per_sector = 1024, + .nr_sectors = 64, + .name = "S25FL128P_256K", + }, + { + .idcode1 = SPSN_ID_S25FL032A, + .idcode2 = SPSN_EXT_ID_S25FL032P, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 64, + .name = "S25FL032P", + }, +}; + +static int spansion_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct spansion_spi_flash *spsn = to_spansion_spi_flash(flash); + unsigned long page_addr; + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = spsn->params->page_size; + page_addr = offset / page_size; + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_S25FLXX_PP; + cmd[1] = page_addr >> 8; + cmd[2] = page_addr; + cmd[3] = byte_addr; + + printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zd\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_S25FLXX_WREN, NULL, 0); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "SF: SPANSION Page Program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + page_addr++; + byte_addr = 0; + } + + printk(BIOS_INFO, "SF: SPANSION: Successfully programmed %zu bytes @ 0x%x\n", + len, offset); + + spi_release_bus(flash->spi); + return ret; +} + +static int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_S25FLXX_SE, offset, len); +} + +struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) +{ + const struct spansion_spi_flash_params *params; + struct spansion_spi_flash *spsn; + unsigned int i; + unsigned short jedec, ext_jedec; + + jedec = idcode[1] << 8 | idcode[2]; + ext_jedec = idcode[3] << 8 | idcode[4]; + + for (i = 0; i < ARRAY_SIZE(spansion_spi_flash_table); i++) { + params = &spansion_spi_flash_table[i]; + if (params->idcode1 == jedec) { + if (params->idcode2 == ext_jedec) + break; + } + } + + if (i == ARRAY_SIZE(spansion_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported SPANSION ID %04x %04x\n", jedec, ext_jedec); + return NULL; + } + + spsn = malloc(sizeof(struct spansion_spi_flash)); + if (!spsn) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + spsn->params = params; + spsn->flash.spi = spi; + spsn->flash.name = params->name; + + spsn->flash.write = spansion_write; + spsn->flash.erase = spansion_erase; + spsn->flash.read = spi_flash_cmd_read_fast; + spsn->flash.sector_size = params->page_size * params->pages_per_sector; + spsn->flash.size = spsn->flash.sector_size * params->nr_sectors; + + return &spsn->flash; +} diff --git a/src/drivers/spi/spi_flash.c b/src/drivers/spi/spi_flash.c new file mode 100644 index 0000000..7384cbc --- /dev/null +++ b/src/drivers/spi/spi_flash.c @@ -0,0 +1,309 @@ +/* + * SPI flash interface + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * + * Licensed under the GPL-2 or later. + */ + +#include <stdlib.h> +#include <string.h> +#include <spi.h> +#include <spi_flash.h> +#include <delay.h> +#include "spi_flash_internal.h" + +static void spi_flash_addr(u32 addr, u8 *cmd) +{ + /* cmd[0] is actual command */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; +} + +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +{ + int ret = spi_xfer(spi, &cmd, 8, response, len * 8); + if (ret) + printk(BIOS_WARNING, "SF: Failed to send command %02x: %d\n", cmd, ret); + + return ret; +} + +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + int ret = spi_xfer(spi, cmd, cmd_len * 8, data, data_len * 8); + if (ret) { + printk(BIOS_WARNING, "SF: Failed to send read command (%zu bytes): %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len) +{ + int ret; + u8 buff[cmd_len + data_len]; + memcpy(buff, cmd, cmd_len); + memcpy(buff + cmd_len, data, data_len); + + ret = spi_xfer(spi, buff, (cmd_len + data_len) * 8, NULL, 0); + if (ret) { + printk(BIOS_WARNING, "SF: Failed to send write command (%zu bytes): %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + struct spi_slave *spi = flash->spi; + int ret; + + spi_claim_bus(spi); + ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); + spi_release_bus(spi); + + return ret; +} + +int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, + size_t len, void *data) +{ + struct spi_slave *spi = flash->spi; + u8 cmd[5]; + + cmd[0] = CMD_READ_ARRAY_FAST; + spi_flash_addr(offset, cmd); + cmd[4] = 0x00; + + return spi_flash_cmd_read(spi, cmd, sizeof(cmd), data, len); +} + +int spi_flash_cmd_read_slow(struct spi_flash *flash, u32 offset, + size_t len, void *data) +{ + struct spi_slave *spi = flash->spi; + u8 cmd[4]; + + cmd[0] = CMD_READ_ARRAY_SLOW; + spi_flash_addr(offset, cmd); + + return spi_flash_cmd_read(spi, cmd, sizeof(cmd), data, len); +} + +int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout, + u8 cmd, u8 poll_bit) +{ + struct spi_slave *spi = flash->spi; + unsigned long timebase; + int ret; + u8 status; + + timebase = timeout; + do { + ret = spi_flash_cmd_read(spi, &cmd, 1, &status, 1); + if (ret) + return -1; + + if ((status & poll_bit) == 0) + break; + + mdelay(1); + } while (timebase--); + + if ((status & poll_bit) == 0) + return 0; + + /* Timed out */ + printk(BIOS_DEBUG, "SF: time out!\n"); + return -1; +} + +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) +{ + return spi_flash_cmd_poll_bit(flash, timeout, + CMD_READ_STATUS, STATUS_WIP); +} + +int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd, + u32 offset, size_t len) +{ + u32 start, end, erase_size; + int ret; + u8 cmd[4]; + + erase_size = flash->sector_size; + if (offset % erase_size || len % erase_size) { + printk(BIOS_WARNING, "SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + cmd[0] = erase_cmd; + start = offset; + end = start + len; + + while (offset < end) { + spi_flash_addr(offset, cmd); + offset += erase_size; + + printk(BIOS_SPEW, "SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], offset); + + ret = spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); + if (ret) + goto out; + + ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0); + if (ret) + goto out; + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); + if (ret) + goto out; + } + + printk(BIOS_DEBUG, "SF: Successfully erased %zu bytes @ %#x\n", len, start); + + out: + spi_release_bus(flash->spi); + return ret; +} + +/* + * The following table holds all device probe functions + * + * shift: number of continuation bytes before the ID + * idcode: the expected IDCODE or 0xff for non JEDEC devices + * probe: the function to call + * + * Non JEDEC devices should be ordered in the table such that + * the probe functions with best detection algorithms come first. + * + * Several matching entries are permitted, they will be tried + * in sequence until a probe function returns non NULL. + * + * IDCODE_CONT_LEN may be redefined if a device needs to declare a + * larger "shift" value. IDCODE_PART_LEN generally shouldn't be + * changed. This is the max number of bytes probe functions may + * examine when looking up part-specific identification info. + * + * Probe functions will be given the idcode buffer starting at their + * manu id byte (the "idcode" in the table below). In other words, + * all of the continuation bytes will be skipped (the "shift" below). + */ +#define IDCODE_CONT_LEN 0 +#define IDCODE_PART_LEN 5 +static const struct { + const u8 shift; + const u8 idcode; + struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode); +} flashes[] = { + /* Keep it sorted by define name */ +#if CONFIG_SPI_FLASH_EON + { 0, 0x1c, spi_flash_probe_eon, }, +#endif +#if CONFIG_SPI_FLASH_MACRONIX + { 0, 0xc2, spi_flash_probe_macronix, }, +#endif +#if CONFIG_SPI_FLASH_SPANSION + { 0, 0x01, spi_flash_probe_spansion, }, +#endif +#if CONFIG_SPI_FLASH_SST + { 0, 0xbf, spi_flash_probe_sst, }, +#endif +#if CONFIG_SPI_FLASH_STMICRO + { 0, 0x20, spi_flash_probe_stmicro, }, +#endif +#if CONFIG_SPI_FLASH_WINBOND + { 0, 0xef, spi_flash_probe_winbond, }, +#endif + /* Keep it sorted by best detection */ +#if CONFIG_SPI_FLASH_STMICRO + { 0, 0xff, spi_flash_probe_stmicro, }, +#endif +}; +#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN) + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + struct spi_flash *flash = NULL; + int ret, i, shift; + u8 idcode[IDCODE_LEN], *idp; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + printk(BIOS_WARNING, "SF: Failed to set up slave\n"); + return NULL; + } + + ret = spi_claim_bus(spi); + if (ret) { + printk(BIOS_WARNING, "SF: Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + /* Read the ID codes */ + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) + goto err_read_id; + +#if CONFIG_DEBUG_SPI_FLASH + printk(BIOS_SPEW, "SF: Got idcodes\n"); + print_buffer(0, idcode, 1, sizeof(idcode), 0); +#endif + + /* count the number of continuation bytes */ + for (shift = 0, idp = idcode; + shift < IDCODE_CONT_LEN && *idp == 0x7f; + ++shift, ++idp) + continue; + + /* search the table for matches in shift and id */ + for (i = 0; i < ARRAY_SIZE(flashes); ++i) + if (flashes[i].shift == shift && flashes[i].idcode == *idp) { + /* we have a match, call probe */ + flash = flashes[i].probe(spi, idp); + if (flash) + break; + } + + if (!flash) { + printk(BIOS_WARNING, "SF: Unsupported manufacturer %02x\n", *idp); + goto err_manufacturer_probe; + } + + printk(BIOS_INFO, "SF: Detected %s with page size %x, total %x\n", + flash->name, flash->sector_size, flash->size); + + spi_release_bus(spi); + + return flash; + +err_manufacturer_probe: +err_read_id: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +void spi_flash_free(struct spi_flash *flash) +{ + spi_free_slave(flash->spi); + free(flash); +} diff --git a/src/drivers/spi/spi_flash_internal.h b/src/drivers/spi/spi_flash_internal.h new file mode 100644 index 0000000..b895e2b --- /dev/null +++ b/src/drivers/spi/spi_flash_internal.h @@ -0,0 +1,81 @@ +/* + * SPI flash internal definitions + * + * Copyright (C) 2008 Atmel Corporation + */ + +/* Common parameters -- kind of high, but they should only occur when there + * is a problem (and well your system already is broken), so err on the side + * of caution in case we're dealing with slower SPI buses and/or processors. + */ +#define CONFIG_SYS_HZ 100 +#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) +#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) +#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) + +/* Common commands */ +#define CMD_READ_ID 0x9f + +#define CMD_READ_ARRAY_SLOW 0x03 +#define CMD_READ_ARRAY_FAST 0x0b +#define CMD_READ_ARRAY_LEGACY 0xe8 + +#define CMD_READ_STATUS 0x05 +#define CMD_WRITE_ENABLE 0x06 + +/* Common status */ +#define STATUS_WIP 0x01 + +/* Send a single-byte command to the device and read the response */ +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); + +/* + * Send a multi-byte command to the device and read the response. Used + * for flash array reads, etc. + */ +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, + size_t len, void *data); + +int spi_flash_cmd_read_slow(struct spi_flash *flash, u32 offset, + size_t len, void *data); + +/* + * Send a multi-byte command to the device followed by (optional) + * data. Used for programming the flash array, etc. + */ +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len); + +/* + * Same as spi_flash_cmd_read() except it also claims/releases the SPI + * bus. Used as common part of the ->read() operation. + */ +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +/* Send a command to the device and wait for some bit to clear itself. */ +int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout, + u8 cmd, u8 poll_bit); + +/* + * Send the read status command to the device and wait for the wip + * (write-in-progress) bit to clear itself. + */ +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); + +/* Erase sectors. */ +int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd, + u32 offset, size_t len); + +/* Manufacturer-specific probe functions */ +struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode); diff --git a/src/drivers/spi/sst.c b/src/drivers/spi/sst.c new file mode 100644 index 0000000..56cc851 --- /dev/null +++ b/src/drivers/spi/sst.c @@ -0,0 +1,268 @@ +/* + * Driver for SST serial flashes + * + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Copyright 2008, Network Appliance Inc. + * Jason McMullan mcmullan@netapp.com + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * Copyright (c) 2008-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +#define CMD_SST_WREN 0x06 /* Write Enable */ +#define CMD_SST_WRDI 0x04 /* Write Disable */ +#define CMD_SST_RDSR 0x05 /* Read Status Register */ +#define CMD_SST_WRSR 0x01 /* Write Status Register */ +#define CMD_SST_READ 0x03 /* Read Data Bytes */ +#define CMD_SST_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_SST_BP 0x02 /* Byte Program */ +#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */ +#define CMD_SST_SE 0x20 /* Sector Erase */ + +#define SST_SR_WIP (1 << 0) /* Write-in-Progress */ +#define SST_SR_WEL (1 << 1) /* Write enable */ +#define SST_SR_BP0 (1 << 2) /* Block Protection 0 */ +#define SST_SR_BP1 (1 << 3) /* Block Protection 1 */ +#define SST_SR_BP2 (1 << 4) /* Block Protection 2 */ +#define SST_SR_AAI (1 << 6) /* Addressing mode */ +#define SST_SR_BPL (1 << 7) /* BP bits lock */ + +struct sst_spi_flash_params { + u8 idcode1; + u16 nr_sectors; + const char *name; +}; + +struct sst_spi_flash { + struct spi_flash flash; + const struct sst_spi_flash_params *params; +}; + +static inline struct sst_spi_flash *to_sst_spi_flash(struct spi_flash *flash) +{ + return container_of(flash, struct sst_spi_flash, flash); +} + +#define SST_SECTOR_SIZE (4 * 1024) +static const struct sst_spi_flash_params sst_spi_flash_table[] = { + { + .idcode1 = 0x8d, + .nr_sectors = 128, + .name = "SST25VF040B", + },{ + .idcode1 = 0x8e, + .nr_sectors = 256, + .name = "SST25VF080B", + },{ + .idcode1 = 0x41, + .nr_sectors = 512, + .name = "SST25VF016B", + },{ + .idcode1 = 0x4a, + .nr_sectors = 1024, + .name = "SST25VF032B", + },{ + .idcode1 = 0x4b, + .nr_sectors = 2048, + .name = "SST25VF064C", + },{ + .idcode1 = 0x01, + .nr_sectors = 16, + .name = "SST25WF512", + },{ + .idcode1 = 0x02, + .nr_sectors = 32, + .name = "SST25WF010", + },{ + .idcode1 = 0x03, + .nr_sectors = 64, + .name = "SST25WF020", + },{ + .idcode1 = 0x04, + .nr_sectors = 128, + .name = "SST25WF040", + }, +}; + +static int +sst_enable_writing(struct spi_flash *flash) +{ + int ret = spi_flash_cmd(flash->spi, CMD_SST_WREN, NULL, 0); + if (ret) + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + return ret; +} + +static int +sst_disable_writing(struct spi_flash *flash) +{ + int ret = spi_flash_cmd(flash->spi, CMD_SST_WRDI, NULL, 0); + if (ret) + printk(BIOS_WARNING, "SF: Disabling Write failed\n"); + return ret; +} + +static int +sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) +{ + int ret; + u8 cmd[4] = { + CMD_SST_BP, + offset >> 16, + offset >> 8, + offset, + }; + + printk(BIOS_SPEW, "BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_SST_RDSR), buf, cmd[0], offset); + + ret = sst_enable_writing(flash); + if (ret) + return ret; + + ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); + if (ret) + return ret; + + return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); +} + +static int +sst_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) +{ + size_t actual, cmd_len; + int ret; + u8 cmd[4]; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + /* If the data is not word aligned, write out leading single byte */ + actual = offset % 2; + if (actual) { + ret = sst_byte_write(flash, offset, buf); + if (ret) + goto done; + } + offset += actual; + + ret = sst_enable_writing(flash); + if (ret) + goto done; + + cmd_len = 4; + cmd[0] = CMD_SST_AAI_WP; + cmd[1] = offset >> 16; + cmd[2] = offset >> 8; + cmd[3] = offset; + + for (; actual < len - 1; actual += 2) { + printk(BIOS_SPEW, "WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_SST_RDSR), buf + actual, cmd[0], + offset); + + ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, + buf + actual, 2); + if (ret) { + printk(BIOS_WARNING, "SF: SST word program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + cmd_len = 1; + offset += 2; + } + + if (!ret) + ret = sst_disable_writing(flash); + + /* If there is a single trailing byte, write it out */ + if (!ret && actual != len) + ret = sst_byte_write(flash, offset, buf + actual); + + done: + printk(BIOS_INFO, "SF: SST: program %s %zu bytes @ 0x%lx\n", + ret ? "failure" : "success", len, offset - actual); + + spi_release_bus(flash->spi); + return ret; +} + +static int sst_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_SST_SE, offset, len); +} + +static int +sst_unlock(struct spi_flash *flash) +{ + int ret; + u8 cmd, status; + + ret = sst_enable_writing(flash); + if (ret) + return ret; + + cmd = CMD_SST_WRSR; + status = 0; + ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &status, 1); + if (ret) + printk(BIOS_WARNING, "SF: Unable to set status byte\n"); + + printk(BIOS_INFO, "SF: SST: status = %x\n", spi_w8r8(flash->spi, CMD_SST_RDSR)); + + return ret; +} + +struct spi_flash * +spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode) +{ + const struct sst_spi_flash_params *params; + struct sst_spi_flash *stm; + size_t i; + + for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) { + params = &sst_spi_flash_table[i]; + if (params->idcode1 == idcode[2]) + break; + } + + if (i == ARRAY_SIZE(sst_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported SST ID %02x\n", idcode[1]); + return NULL; + } + + stm = malloc(sizeof(*stm)); + if (!stm) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + stm->params = params; + stm->flash.spi = spi; + stm->flash.name = params->name; + + stm->flash.write = sst_write; + stm->flash.erase = sst_erase; + stm->flash.read = spi_flash_cmd_read_fast; + stm->flash.sector_size = SST_SECTOR_SIZE; + stm->flash.size = stm->flash.sector_size * params->nr_sectors; + + /* Flash powers up read-only, so clear BP# bits */ + sst_unlock(&stm->flash); + + return &stm->flash; +} diff --git a/src/drivers/spi/stmicro.c b/src/drivers/spi/stmicro.c new file mode 100644 index 0000000..8cbdad5 --- /dev/null +++ b/src/drivers/spi/stmicro.c @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright 2008, Network Appliance Inc. + * Jason McMullan mcmullan@netapp.com + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +/* M25Pxx-specific commands */ +#define CMD_M25PXX_WREN 0x06 /* Write Enable */ +#define CMD_M25PXX_WRDI 0x04 /* Write Disable */ +#define CMD_M25PXX_RDSR 0x05 /* Read Status Register */ +#define CMD_M25PXX_WRSR 0x01 /* Write Status Register */ +#define CMD_M25PXX_READ 0x03 /* Read Data Bytes */ +#define CMD_M25PXX_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_M25PXX_PP 0x02 /* Page Program */ +#define CMD_M25PXX_SE 0xd8 /* Sector Erase */ +#define CMD_M25PXX_BE 0xc7 /* Bulk Erase */ +#define CMD_M25PXX_DP 0xb9 /* Deep Power-down */ +#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ + +#define STM_ID_M25P10 0x11 +#define STM_ID_M25P16 0x15 +#define STM_ID_M25P20 0x12 +#define STM_ID_M25P32 0x16 +#define STM_ID_M25P40 0x13 +#define STM_ID_M25P64 0x17 +#define STM_ID_M25P80 0x14 +#define STM_ID_M25P128 0x18 + +struct stmicro_spi_flash_params { + u8 idcode1; + u16 page_size; + u16 pages_per_sector; + u16 nr_sectors; + const char *name; +}; + +/* spi_flash needs to be first so upper layers can free() it */ +struct stmicro_spi_flash { + struct spi_flash flash; + const struct stmicro_spi_flash_params *params; +}; + +static inline struct stmicro_spi_flash *to_stmicro_spi_flash(struct spi_flash + *flash) +{ + return container_of(flash, struct stmicro_spi_flash, flash); +} + +static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { + { + .idcode1 = STM_ID_M25P10, + .page_size = 256, + .pages_per_sector = 128, + .nr_sectors = 4, + .name = "M25P10", + }, + { + .idcode1 = STM_ID_M25P16, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 32, + .name = "M25P16", + }, + { + .idcode1 = STM_ID_M25P20, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 4, + .name = "M25P20", + }, + { + .idcode1 = STM_ID_M25P32, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 64, + .name = "M25P32", + }, + { + .idcode1 = STM_ID_M25P40, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 8, + .name = "M25P40", + }, + { + .idcode1 = STM_ID_M25P64, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 128, + .name = "M25P64", + }, + { + .idcode1 = STM_ID_M25P80, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 16, + .name = "M25P80", + }, + { + .idcode1 = STM_ID_M25P128, + .page_size = 256, + .pages_per_sector = 1024, + .nr_sectors = 64, + .name = "M25P128", + }, +}; + +static int stmicro_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); + unsigned long page_addr; + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = stm->params->page_size; + page_addr = offset / page_size; + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_M25PXX_PP; + cmd[1] = page_addr >> 8; + cmd[2] = page_addr; + cmd[3] = byte_addr; + + printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zd\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "SF: STMicro Page Program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + page_addr++; + byte_addr = 0; + } + + printk(BIOS_INFO, "SF: STMicro: Successfully programmed %zu bytes @ 0x%x\n", + len, offset); + + spi_release_bus(flash->spi); + return ret; +} + +static int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_M25PXX_SE, offset, len); +} + +struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) +{ + const struct stmicro_spi_flash_params *params; + struct stmicro_spi_flash *stm; + unsigned int i; + + if (idcode[0] == 0xff) { + i = spi_flash_cmd(spi, CMD_M25PXX_RES, + idcode, 4); + if (i) + return NULL; + if ((idcode[3] & 0xf0) == 0x10) { + idcode[0] = 0x20; + idcode[1] = 0x20; + idcode[2] = idcode[3] + 1; + } else + return NULL; + } + + for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) { + params = &stmicro_spi_flash_table[i]; + if (params->idcode1 == idcode[2]) { + break; + } + } + + if (i == ARRAY_SIZE(stmicro_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported STMicro ID %02x\n", idcode[1]); + return NULL; + } + + stm = malloc(sizeof(struct stmicro_spi_flash)); + if (!stm) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + stm->params = params; + stm->flash.spi = spi; + stm->flash.name = params->name; + + stm->flash.write = stmicro_write; + stm->flash.erase = stmicro_erase; + stm->flash.read = spi_flash_cmd_read_fast; + stm->flash.sector_size = params->page_size * params->pages_per_sector; + stm->flash.size = stm->flash.sector_size * params->nr_sectors; + + return &stm->flash; +} diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c new file mode 100644 index 0000000..65818d5 --- /dev/null +++ b/src/drivers/spi/winbond.c @@ -0,0 +1,218 @@ +/* + * Copyright 2008, Network Appliance Inc. + * Author: Jason McMullan <mcmullan <at> netapp.com> + * Licensed under the GPL-2 or later. + */ + +#include <stdlib.h> +#include <spi_flash.h> +#include "spi_flash_internal.h" + +/* M25Pxx-specific commands */ +#define CMD_W25_WREN 0x06 /* Write Enable */ +#define CMD_W25_WRDI 0x04 /* Write Disable */ +#define CMD_W25_RDSR 0x05 /* Read Status Register */ +#define CMD_W25_WRSR 0x01 /* Write Status Register */ +#define CMD_W25_READ 0x03 /* Read Data Bytes */ +#define CMD_W25_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_W25_PP 0x02 /* Page Program */ +#define CMD_W25_SE 0x20 /* Sector (4K) Erase */ +#define CMD_W25_BE 0xd8 /* Block (64K) Erase */ +#define CMD_W25_CE 0xc7 /* Chip Erase */ +#define CMD_W25_DP 0xb9 /* Deep Power-down */ +#define CMD_W25_RES 0xab /* Release from DP, and Read Signature */ + +struct winbond_spi_flash_params { + uint16_t id; + /* Log2 of page size in power-of-two mode */ + uint8_t l2_page_size; + uint16_t pages_per_sector; + uint16_t sectors_per_block; + uint16_t nr_blocks; + const char *name; +}; + +/* spi_flash needs to be first so upper layers can free() it */ +struct winbond_spi_flash { + struct spi_flash flash; + const struct winbond_spi_flash_params *params; +}; + +static inline struct winbond_spi_flash * +to_winbond_spi_flash(struct spi_flash *flash) +{ + return container_of(flash, struct winbond_spi_flash, flash); +} + +static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { + { + .id = 0x3015, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 32, + .name = "W25X16", + }, + { + .id = 0x3016, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 64, + .name = "W25X32", + }, + { + .id = 0x3017, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 128, + .name = "W25X64", + }, + { + .id = 0x4015, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 32, + .name = "W25Q16", + }, + { + .id = 0x4016, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 64, + .name = "W25Q32", + }, + { + .id = 0x4017, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 128, + .name = "W25Q64", + }, + { + .id = 0x4018, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 256, + .name = "W25Q128", + }, +}; + +static int winbond_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct winbond_spi_flash *stm = to_winbond_spi_flash(flash); + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = min(1 << stm->params->l2_page_size, CONTROLLER_PAGE_LIMIT); + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_WARNING, "SF: Unable to claim SPI bus\n"); + return ret; + } + + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_W25_PP; + cmd[1] = (offset >> 16) & 0xff; + cmd[2] = (offset >> 8) & 0xff; + cmd[3] = offset & 0xff; + printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %ld\n", + buf + actual, + cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_W25_WREN, NULL, 0); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + goto out; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Winbond Page Program failed\n"); + goto out; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + goto out; + + offset += chunk_len; + byte_addr = 0; + } + + printk(BIOS_INFO, "SF: Winbond: Successfully programmed %zu bytes @ 0x%lx\n", + len, offset - len); + ret = 0; + +out: + spi_release_bus(flash->spi); + return ret; +} + +static int winbond_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + return spi_flash_cmd_erase(flash, CMD_W25_SE, offset, len); +} + +struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) +{ + const struct winbond_spi_flash_params *params; + unsigned page_size; + struct winbond_spi_flash *stm; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(winbond_spi_flash_table); i++) { + params = &winbond_spi_flash_table[i]; + if (params->id == ((idcode[1] << 8) | idcode[2])) + break; + } + + if (i == ARRAY_SIZE(winbond_spi_flash_table)) { + printk(BIOS_WARNING, "SF: Unsupported Winbond ID %02x%02x\n", + idcode[1], idcode[2]); + return NULL; + } + + stm = malloc(sizeof(struct winbond_spi_flash)); + if (!stm) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + stm->params = params; + stm->flash.spi = spi; + stm->flash.name = params->name; + + /* Assuming power-of-two page size initially. */ + page_size = 1 << params->l2_page_size; + + stm->flash.write = winbond_write; + stm->flash.erase = winbond_erase; +#ifdef CONFIG_SPI_FLASH_NO_FAST_READ + stm->flash.read = spi_flash_cmd_read_slow; +#else + stm->flash.read = spi_flash_cmd_read_fast; +#endif + stm->flash.sector_size = (1 << stm->params->l2_page_size) * + stm->params->pages_per_sector; + stm->flash.size = page_size * params->pages_per_sector + * params->sectors_per_block + * params->nr_blocks; + + return &stm->flash; +} diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h index a2d6884..1765293 100644 --- a/src/include/device/pci_ids.h +++ b/src/include/device/pci_ids.h @@ -2502,6 +2502,10 @@ #define PCI_DEVICE_ID_INTEL_82801IO_LPC 0x2914 #define PCI_DEVICE_ID_INTEL_82801IH_LPC 0x2912
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f +#define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc + /* Intel 82801E (C-ICH) */ #define PCI_DEVICE_ID_INTEL_82801E_LPC 0x2450 #define PCI_DEVICE_ID_INTEL_82801E_USB 0x2452 diff --git a/src/include/spi.h b/src/include/spi.h new file mode 100644 index 0000000..bb84258 --- /dev/null +++ b/src/include/spi.h @@ -0,0 +1,203 @@ +/* + * (C) Copyright 2001 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SPI_H_ +#define _SPI_H_ + +#include <stdint.h> + +/* Controller-specific definitions: */ + +/* SPI mode flags */ +#define SPI_CPHA 0x01 /* clock phase */ +#define SPI_CPOL 0x02 /* clock polarity */ +#define SPI_MODE_0 (0|0) /* (original MicroWire) */ +#define SPI_MODE_1 (0|SPI_CPHA) +#define SPI_MODE_2 (SPI_CPOL|0) +#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_CS_HIGH 0x04 /* CS active high */ +#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ +#define SPI_3WIRE 0x10 /* SI/SO signals shared */ +#define SPI_LOOP 0x20 /* loopback mode */ + +/* SPI transfer flags */ +#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */ +#define SPI_XFER_END 0x02 /* Deassert CS after transfer */ + +/*----------------------------------------------------------------------- + * Representation of a SPI slave, i.e. what we're communicating with. + * + * Drivers are expected to extend this with controller-specific data. + * + * bus: ID of the bus that the slave is attached to. + * cs: ID of the chip select connected to the slave. + */ +struct spi_slave { + unsigned int bus; + unsigned int cs; +}; + +/*----------------------------------------------------------------------- + * Initialization, must be called once on start up. + * + * TODO: I don't think we really need this. + */ +void spi_init(void); + +/*----------------------------------------------------------------------- + * Set up communications parameters for a SPI slave. + * + * This must be called once for each slave. Note that this function + * usually doesn't touch any actual hardware, it only initializes the + * contents of spi_slave so that the hardware can be easily + * initialized later. + * + * bus: Bus ID of the slave chip. + * cs: Chip select ID of the slave chip on the specified bus. + * max_hz: Maximum SCK rate in Hz. + * mode: Clock polarity, clock phase and other parameters. + * + * Returns: A spi_slave reference that can be used in subsequent SPI + * calls, or NULL if one or more of the parameters are not supported. + */ +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode); + +/*----------------------------------------------------------------------- + * Free any memory associated with a SPI slave. + * + * slave: The SPI slave + */ +void spi_free_slave(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Claim the bus and prepare it for communication with a given slave. + * + * This must be called before doing any transfers with a SPI slave. It + * will enable and initialize any SPI hardware as necessary, and make + * sure that the SCK line is in the correct idle state. It is not + * allowed to claim the same bus for several slaves without releasing + * the bus in between. + * + * slave: The SPI slave + * + * Returns: 0 if the bus was claimed successfully, or a negative value + * if it wasn't. + */ +int spi_claim_bus(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Release the SPI bus + * + * This must be called once for every call to spi_claim_bus() after + * all transfers have finished. It may disable any SPI hardware as + * appropriate. + * + * slave: The SPI slave + */ +void spi_release_bus(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * SPI transfer + * + * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks + * "bitlen" bits in the SPI MISO port. That's just the way SPI works. + * + * The source of the outgoing bits is the "dout" parameter and the + * destination of the input bits is the "din" parameter. Note that "dout" + * and "din" can point to the same memory location, in which case the + * input data overwrites the output data (since both are buffered by + * temporary variables, this is OK). + * + * spi_xfer() interface: + * slave: The SPI slave which will be sending/receiving the data. + * dout: Pointer to a string of bits to send out. The bits are + * held in a byte array and are sent MSB first. + * bitsout: How many bits to write. + * din: Pointer to a string of bits that will be filled in. + * bitsin: How many bits to read. + * + * Returns: 0 on success, not 0 on failure + */ +int spi_xfer(struct spi_slave *slave, const void *dout, unsigned int bitsout, + void *din, unsigned int bitsin); + +/*----------------------------------------------------------------------- + * Determine if a SPI chipselect is valid. + * This function is provided by the board if the low-level SPI driver + * needs it to determine if a given chipselect is actually valid. + * + * Returns: 1 if bus:cs identifies a valid chip on this board, 0 + * otherwise. + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs); + +/*----------------------------------------------------------------------- + * Activate a SPI chipselect. + * This function is provided by the board code when using a driver + * that can't control its chipselects automatically (e.g. + * common/soft_spi.c). When called, it should activate the chip select + * to the device identified by "slave". + */ +void spi_cs_activate(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Deactivate a SPI chipselect. + * This function is provided by the board code when using a driver + * that can't control its chipselects automatically (e.g. + * common/soft_spi.c). When called, it should deactivate the chip + * select to the device identified by "slave". + */ +void spi_cs_deactivate(struct spi_slave *slave); + +/*----------------------------------------------------------------------- + * Set transfer speed. + * This sets a new speed to be applied for next spi_xfer(). + * slave: The SPI slave + * hz: The transfer speed + */ +void spi_set_speed(struct spi_slave *slave, uint32_t hz); + +/*----------------------------------------------------------------------- + * Write 8 bits, then read 8 bits. + * slave: The SPI slave we're communicating with + * byte: Byte to be written + * + * Returns: The value that was read, or a negative value on error. + * + * TODO: This function probably shouldn't be inlined. + */ +static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte) +{ + unsigned char dout[2]; + unsigned char din[2]; + int ret; + + dout[0] = byte; + dout[1] = 0; + + ret = spi_xfer(slave, dout, 16, din, 16); + return ret < 0 ? ret : din[1]; +} + +#endif /* _SPI_H_ */ diff --git a/src/include/spi_flash.h b/src/include/spi_flash.h new file mode 100644 index 0000000..2a1dcd4 --- /dev/null +++ b/src/include/spi_flash.h @@ -0,0 +1,91 @@ +/* + * Interface to SPI flash + * + * Copyright (C) 2008 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _SPI_FLASH_H_ +#define _SPI_FLASH_H_ + +#include <stdint.h> +#include <stddef.h> +#include <console/console.h> +#include <spi.h> + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +#define min(a, b) ((a)<(b)?(a):(b)) + +#define CONFIG_ICH_SPI +#ifdef CONFIG_ICH_SPI +#define CONTROLLER_PAGE_LIMIT 64 +#else +/* any number larger than 4K would do, actually */ +#define CONTROLLER_PAGE_LIMIT ((int)(~0U>>1)) +#endif + +struct spi_flash { + struct spi_slave *spi; + + const char *name; + + u32 size; + + u32 sector_size; + + int (*read)(struct spi_flash *flash, u32 offset, + size_t len, void *buf); + int (*write)(struct spi_flash *flash, u32 offset, + size_t len, const void *buf); + int (*erase)(struct spi_flash *flash, u32 offset, + size_t len); +}; + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode); +void spi_flash_free(struct spi_flash *flash); + +static inline int spi_flash_read(struct spi_flash *flash, u32 offset, + size_t len, void *buf) +{ + return flash->read(flash, offset, len, buf); +} + +static inline int spi_flash_write(struct spi_flash *flash, u32 offset, + size_t len, const void *buf) +{ + return flash->write(flash, offset, len, buf); +} + +static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, + size_t len) +{ + return flash->erase(flash, offset, len); +} + +#endif /* _SPI_FLASH_H_ */ diff --git a/src/southbridge/intel/bd82x6x/Kconfig b/src/southbridge/intel/bd82x6x/Kconfig index 3891be1..33dfe9d 100644 --- a/src/southbridge/intel/bd82x6x/Kconfig +++ b/src/southbridge/intel/bd82x6x/Kconfig @@ -33,6 +33,8 @@ config SOUTH_BRIDGE_OPTIONS # dummy select USE_WATCHDOG_ON_BOOT select PCIEXP_ASPM select PCIEXP_COMMON_CLOCK + select SPI_FLASH + select SPI_FLASH_NO_FAST_READ
config EHCI_BAR hex diff --git a/src/southbridge/intel/bd82x6x/Makefile.inc b/src/southbridge/intel/bd82x6x/Makefile.inc index 5732254..f086426 100644 --- a/src/southbridge/intel/bd82x6x/Makefile.inc +++ b/src/southbridge/intel/bd82x6x/Makefile.inc @@ -34,6 +34,8 @@ ramstage-y += me_status.c ramstage-y += reset.c ramstage-y += watchdog.c
+ramstage-y += spi.c + ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c $(me-src-y) finalize.c
diff --git a/src/southbridge/intel/bd82x6x/spi.c b/src/southbridge/intel/bd82x6x/spi.c new file mode 100644 index 0000000..2508a96 --- /dev/null +++ b/src/southbridge/intel/bd82x6x/spi.c @@ -0,0 +1,699 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This file is derived from the flashrom project. */ +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <delay.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include <spi.h> + +#define min(a, b) ((a)<(b)?(a):(b)) + +typedef device_t pci_dev_t; +#define pci_read_config_byte(dev, reg, targ) *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ) *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ) *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val) pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val) pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val) pci_write_config32(dev, reg, val) + +typedef struct spi_slave ich_spi_slave; + +static int ichspi_lock = 0; + +typedef struct ich7_spi_regs { + uint16_t spis; + uint16_t spic; + uint32_t spia; + uint64_t spid[8]; + uint64_t _pad; + uint32_t bbar; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; +} __attribute__((packed)) ich7_spi_regs; + +typedef struct ich9_spi_regs { + uint32_t bfpr; + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; + uint32_t frap; + uint32_t freg[5]; + uint32_t _reserved1[3]; + uint32_t pr[5]; + uint32_t _reserved2[2]; + uint8_t ssfs; + uint8_t ssfc[3]; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; + uint32_t bbar; + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __attribute__((packed)) ich9_spi_regs; + +typedef struct ich_spi_controller { + int locked; + + uint8_t *opmenu; + int menubytes; + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; +} ich_spi_controller; + +static ich_spi_controller cntlr; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000 +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 +}; + +#if CONFIG_DEBUG_SPI_FLASH + +static u8 readb_(const void *addr) +{ + u8 v = readb(addr); + printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u16 readw_(const void *addr) +{ + u16 v = readw(addr); + printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u32 readl_(const void *addr) +{ + u32 v = readl(addr); + printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static void writeb_(u8 b, const void *addr) +{ + writeb(b, addr); + printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writew_(u16 b, const void *addr) +{ + writew(b, addr); + printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writel_(u32 b, const void *addr) +{ + writel(b, addr); + printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ + +#define readb_(a) read8((uint32_t)a) +#define readw_(a) read16((uint32_t)a) +#define readl_(a) read32((uint32_t)a) +#define writeb_(val, addr) write8((uint32_t)addr, val) +#define writew_(val, addr) write16((uint32_t)addr, val) +#define writel_(val, addr) write32((uint32_t)addr, val) + +#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + const uint8_t *bvalue = value; + uint8_t *bdest = dest; + + while (size >= 4) { + writel_(*(const uint32_t *)bvalue, bdest); + bdest += 4; bvalue += 4; size -= 4; + } + while (size) { + writeb_(*bvalue, bdest); + bdest++; bvalue++; size--; + } +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + const uint8_t *bsrc = src; + uint8_t *bvalue = value; + + while (size >= 4) { + *(uint32_t *)bvalue = readl_(bsrc); + bsrc += 4; bvalue += 4; size -= 4; + } + while (size) { + *bvalue = readb_(bsrc); + bsrc++; bvalue++; size--; + } +} + +static void ich_set_bbar(uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + minaddr &= bbar_mask; + ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + writel_(ichspi_bbar, cntlr.bbar); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + printk(BIOS_DEBUG, "spi_cs_is_valid used but not implemented\n"); + return 0; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + ich_spi_slave *slave = malloc(sizeof(*slave)); + + if (!slave) { + printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); + return NULL; + } + + memset(slave, 0, sizeof(*slave)); + + slave->bus = bus; + slave->cs = cs; + return slave; +} + +void spi_free_slave(struct spi_slave *_slave) +{ + ich_spi_slave *slave = (ich_spi_slave *)_slave; + free(slave); +} + +static inline int spi_is_cougarpoint_lpc(uint16_t device_id) +{ + return device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX; +}; + +void spi_init(void) +{ + int ich_version = 0; + + uint8_t *rcrb; /* Root Complex Register Block */ + uint32_t rcba; /* Root Complex Base Address */ + uint8_t bios_cntl; + pci_dev_t dev; + uint32_t ids; + uint16_t vendor_id, device_id; + + dev = dev_find_slot(0, PCI_DEVFN(31, 0)); + pci_read_config_dword(dev, 0, &ids); + vendor_id = ids; + device_id = (ids >> 16); + + if (vendor_id != PCI_VENDOR_ID_INTEL) { + printk(BIOS_DEBUG, "ICH SPI: No ICH found.\n"); + return; + } + + if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC) { + ich_version = 7; + } else if (spi_is_cougarpoint_lpc(device_id)) { + ich_version = 9; + } else { + printk(BIOS_DEBUG, "ICH SPI: No known ICH found.\n"); + return; + } + + pci_read_config_dword(dev, 0xf0, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ + rcrb = (uint8_t *)(rcba & 0xffffc000); + switch (ich_version) { + case 7: + { + const uint16_t ich7_spibar_offset = 0x3020; + ich7_spi_regs *ich7_spi = + (ich7_spi_regs *)(rcrb + ich7_spibar_offset); + + ichspi_lock = readw_(&ich7_spi->spis) & SPIS_LOCK; + cntlr.opmenu = ich7_spi->opmenu; + cntlr.menubytes = sizeof(ich7_spi->opmenu); + cntlr.optype = &ich7_spi->optype; + cntlr.addr = &ich7_spi->spia; + cntlr.data = (uint8_t *)ich7_spi->spid; + cntlr.databytes = sizeof(ich7_spi->spid); + cntlr.status = (uint8_t *)&ich7_spi->spis; + cntlr.control = &ich7_spi->spic; + cntlr.bbar = &ich7_spi->bbar; + cntlr.preop = &ich7_spi->preop; + break; + } + case 9: + { + const uint16_t ich9_spibar_offset = 0x3800; + ich9_spi_regs *ich9_spi = + (ich9_spi_regs *)(rcrb + ich9_spibar_offset); + ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN; + cntlr.opmenu = ich9_spi->opmenu; + cntlr.menubytes = sizeof(ich9_spi->opmenu); + cntlr.optype = &ich9_spi->optype; + cntlr.addr = &ich9_spi->faddr; + cntlr.data = (uint8_t *)ich9_spi->fdata; + cntlr.databytes = sizeof(ich9_spi->fdata); + cntlr.status = &ich9_spi->ssfs; + cntlr.control = (uint16_t *)ich9_spi->ssfc; + cntlr.bbar = &ich9_spi->bbar; + cntlr.preop = &ich9_spi->preop; + break; + } + default: + printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version); + } + + ich_set_bbar(0); + + /* Disable the BIOS write protect so write commands are allowed. */ + pci_read_config_byte(dev, 0xdc, &bios_cntl); + switch (ich_version) { + case 9: + /* Deassert SMM BIOS Write Protect Disable. */ + bios_cntl &= ~(1 << 5); + break; + + default: + break; + } + pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +typedef struct spi_transaction { + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +} spi_transaction; + +static inline void spi_use_out(spi_transaction *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(spi_transaction *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(spi_transaction *trans) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout > 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + } +} + +static int spi_setup_opcode(spi_transaction *trans) +{ + uint16_t optypes; + uint8_t opmenu[cntlr.menubytes]; + + trans->opcode = trans->out[0]; + spi_use_out(trans, 1); + if (!ichspi_lock) { + /* The lock is off, so just use index 0. */ + writeb_(trans->opcode, cntlr.opmenu); + optypes = readw_(cntlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + writew_(optypes, cntlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < cntlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == cntlr.menubytes) { + printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = readw_(cntlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(spi_transaction *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 6000; /* This will result in 60 ms */ + u16 status = 0; + + while (timeout--) { + status = readw_(cntlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + writew_((status & bitmask), cntlr.status); + return status; + } + udelay(10); + } + + printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bitsout, void *din, unsigned int bitsin) +{ + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + + spi_transaction trans = { + dout, bitsout / 8, + din, bitsin / 8, + 0xff, 0xff, 0 + }; + + /* There has to always at least be an opcode. */ + if (!bitsout || !dout) { + printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); + return -1; + } + /* Make sure if we read something we have a place to put it. */ + if (bitsin != 0 && !din) { + printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); + return -1; + } + /* Right now we don't support writing partial bytes. */ + if (bitsout % 8 || bitsin % 8) { + printk(BIOS_DEBUG, "ICH SPI: Accessing partial bytes not supported\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); + + spi_setup_type(&trans); + if ((opcode_index = spi_setup_opcode(&trans)) < 0) + return -1; + if ((with_address = spi_setup_offset(&trans)) < 0) + return -1; + + if (!ichspi_lock && trans.opcode == 0x06) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + writew_(trans.opcode, cntlr.preop); + return 0; + } + + /* Preset control fields */ + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (readw_(cntlr.preop)) + control |= SPIC_ACS; + + if (!trans.bytesout && !trans.bytesin) { + /* + * This is a 'no data' command (like Write Enable), its + * bitesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + writew_(control, cntlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); + return -1; + } + + return 0; + } + + /* + * Check if this is a write command atempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans.bytesout > cntlr.databytes) { + printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" + " CONTROLLER_PAGE_LIMIT?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans.bytesout || trans.bytesin) { + uint32_t data_length; + + /* SPI addresses are 24 bit only */ + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + if (trans.bytesout) + data_length = min(trans.bytesout, cntlr.databytes); + else + data_length = min(trans.bytesin, cntlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans.bytesout) { + write_reg(trans.out, cntlr.data, data_length); + spi_use_out(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((cntlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + writew_(control, cntlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans.bytesin) { + read_reg(cntlr.data, trans.in, data_length); + spi_use_in(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + } + + /* Clear atomic preop now that xfer is done */ + writew_(0, cntlr.preop); + + return 0; +}
-
Stefan Reinauer