I am gonna undertake the task of writting support for the ati chipset :) If anyone else is interested in helping please contact me directly. To give everyone all the info i have, I have none I will be working from lspci output which included.
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] Subsystem: Hewlett-Packard Company Unknown device 3085
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0100c Data: 4149 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device 5950 Capabilities: [b8] HyperTransport: MSI Mapping Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 8400 [size=16] Region 1: Memory at b0003000 (32-bit, non-prefetchable) [size=1K] Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 8410 [size=16] Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=07, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: b0200000-b02fffff Prefetchable memory behind bridge: 30000000-33ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at b0003400 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at b0003800 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at b0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at b0120000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 1355 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: Memory at b0200000 (32-bit, non-prefetchable) [size=8K]
03:04.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at b0202000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 30000000-33fff000 (prefetchable) Memory window 1: 34000000-37fff000 I/O window 0: 0000a400-0000a4ff I/O window 1: 0000a800-0000a8ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company Unknown device 3085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at a000 [size=256] Region 1: Memory at b0203000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge 00: 02 10 50 59 06 00 20 22 00 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00: 02 10 3f 5a 07 00 30 02 00 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 91 91 20 02 20: 10 b0 10 b0 01 c0 f1 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 0c 00
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00: 02 10 36 5a 04 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00: 02 10 74 43 17 00 b0 02 00 10 03 0c 10 40 80 00 10: 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 74 43 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00: 02 10 75 43 17 00 b0 02 00 10 03 0c 10 40 00 00 10: 00 10 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 75 43 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00: 02 10 73 43 17 00 b0 02 00 20 03 0c 10 40 00 00 10: 00 20 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 73 43 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10) 00: 02 10 72 43 03 00 30 02 10 00 05 0c 00 00 80 00 10: 01 84 00 00 00 30 00 b0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00: 02 10 76 43 05 00 30 02 00 8a 01 01 00 00 00 00 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 20: 11 84 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 01 00 00
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00: 02 10 77 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00: 02 10 71 43 07 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 07 40 a1 a1 80 22 20: 20 b0 20 b0 00 30 f0 33 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01) 00: 02 10 70 43 17 00 30 04 01 00 01 04 08 40 80 00 10: 00 34 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 02 00
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 01) 00: 02 10 78 43 17 00 30 04 01 00 03 07 08 40 80 00 10: 00 38 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 02 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) 00: 02 10 55 59 07 02 b0 02 00 00 00 03 08 ff 00 00 10: 08 00 00 c0 01 90 00 00 00 00 10 b0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00
03:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 00: e4 14 18 43 06 00 00 00 02 00 80 02 00 40 00 00 10: 00 00 20 b0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 55 13 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
03:04.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 00: 4c 10 56 ac 07 00 10 02 00 00 07 06 10 a8 02 00 10: 00 20 20 b0 a0 00 00 02 03 04 07 b0 00 00 00 30 20: 00 f0 ff 33 00 00 00 34 00 f0 ff 37 00 a4 00 00 30: fc a4 00 00 00 a8 00 00 fc a8 00 00 0a 01 c0 05 40: 3c 10 85 30 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00: ec 10 39 81 07 00 90 02 10 00 00 02 00 80 00 00 10: 01 a0 00 00 00 30 20 b0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 85 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40
I have emailed hp about getting the specs they use for writting there bios, If I hear anything back from them I will be more then happy to share it ...
Thanks, -Jory
Jory A. Pratt wrote:
I am gonna undertake the task of writting support for the ati chipset :)
Good luck!
I have emailed hp about getting the specs they use for writting there bios, If I hear anything back from them I will be more then happy to share it ..
HP can't help you, at least not as far as the chipset goes. The motherboards in HP's laptops (I assume you have a laptop, seeing as there's a cardbus controller and wifi) are made by an outside company, can't remember the name right at the moment, but it's irrelevant, because they can't help you either. They had to sign an NDA (non-disclosure agreement, if you don't know) with ATI (now AMD) to access the docs that you/we need for this, and you will probably have to do the same, or else screw the docs and try to make something work from lspci -xxx. Oh, and if you do get the docs, you'd have to get their approval before releasing ANYTHING to the public, or else your ass could end up in jail. The final caveat in laptops is the microcontroller, which controls power management, among other things. You probably won't be able to get the docs on that, and I have no idea what you'd have to do to make it work (tbh, I don't even know how you'd find out the make/model on it, aside from ripping apart the laptop). Not to try and put you off or anything, just want you to know what you're getting into. I'd love to see this happen, especially if you could get the microcontroller working, because it's probably the same as mine ;)
-Corey
Hi,
On Mon, Jan 22, 2007 at 01:52:37AM -0500, Corey Osgood wrote:
Jory A. Pratt wrote:
I am gonna undertake the task of writting support for the ati chipset :)
Great to hear! Please keep us updated if you manage to get some documentation from ATI, or some working code from guesswork or reverse engineering or whatever...
Uwe.
-
Corey Osgood -
Jory A. Pratt -
Uwe Hermann