Mike Loptien (mike.loptien@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2592
-gerrit
commit 7f7a6fafb82060b439cdeee2eb099cd89524df23 Author: Mike Loptien mike.loptien@se-eng.com Date: Tue Mar 5 14:21:28 2013 -0700
Persimmon DSDT: Add secondary bus range to PCI0
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS'
By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses.
This change will apply to other AMD mainboards and will be in a different commit.
Change-Id: I44f22bc03a0dcbcd2594d4291508826cc2146860 Signed-off-by: Mike Loptien mike.loptien@se-eng.com --- src/mainboard/amd/persimmon/dsdt.asl | 38 +++++++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-)
diff --git a/src/mainboard/amd/persimmon/dsdt.asl b/src/mainboard/amd/persimmon/dsdt.asl index 582ab7f..e99152c 100644 --- a/src/mainboard/amd/persimmon/dsdt.asl +++ b/src/mainboard/amd/persimmon/dsdt.asl @@ -1157,6 +1157,15 @@ DefinitionBlock ( Device(PCI0) { External (TOM1) External (TOM2) + /* The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + Name (PSBB, 0x0000) /* Secondary bus base variable for PCI0 */ + Name (PSBL, 0x0100) /* Secondary bus length variable for PCI0 */ Name(_HID, EISAID("PNP0A03")) Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ Method(_BBN, 0) { /* Bus number = 0 */ @@ -1477,14 +1486,23 @@ DefinitionBlock ( } /* end Ac97modem */
Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x007F, /* range maximum */ + 0x0000, /* translation */ + 0x0080, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ )
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, @@ -1581,6 +1599,16 @@ DefinitionBlock ( Store(PBLN,EBML) } #endif + /* Set the secondary bus range for PCI0. */ + CreateWordField (CRES, ^PSB0._MIN, MIN0) + CreateWordField (CRES, ^PSB0._MAX, MAX0) + CreateWordField (CRES, ^PSB0._LEN, LEN0) + + Store (PSBB, MIN0) /* Put Secondary Bus Base value into MIN0 memory */ + Store (PSBL, LEN0) /* Put Secondary Bus Length value into LEN0 memory */ + Store (LEN0, Local0) /* Copy into Local0 for doing math */ + Add (MIN0, Decrement (Local0), MAX0) /* Add MIN0 to Local0 and put it into MAX0 memory */ + CreateDWordField(CRES, ^MMIO._BAS, MM1B) CreateDWordField(CRES, ^MMIO._LEN, MM1L) /*
-
Mike Loptien