Thanks for your information.
I still have same issue even tried to comment out the 1f.3 device in
./src/mainboard/intel/camelbackmountain_fsp/devicetree.cb then rebuild coreboot.
Could you let me know how to do that?
From: David Hendricks [mailto:email@example.com]
Sent: Friday, December 29, 2017 9:46 AM
To: Hilbert Tu(杜睿哲_Pegatron)
Subject: Re: [coreboot] BDX-DE PCI init fail
Have you had any luck? I have a board with a similar problem. Commenting out the entry for
device 1f.3 in devicetree.cb seemed to help (I copied
src/mainboard/intel/camelbackmountain_fsp for my project).
On Wed, Dec 27, 2017 at 2:17 AM, Hilbert Tu(杜睿哲_Pegatron)
I am porting coreboot on Intel BDX-DE platform and it gets stuck when init PCI 00:1f.3.
This device should be SMBus, serial management bus. But I don’t know why this happened.
Does anyone can give me some hint? Attached is my boot up log. Thanks in advance.
This e-mail and its attachment may contain information that is confidential or privileged,
and are solely for the use of the individual to whom this e-mail is addressed. If you are
not the intended recipient or have received it accidentally, please immediately notify the
sender by reply e-mail and destroy all copies of this email and its attachment. Please be
advised that any unauthorized use, disclosure, distribution or copying of this email or
its attachment is strictly prohibited.
coreboot mailing list: firstname.lastname@example.org<mailto:email@example.com>