[LinuxBIOS] Problem on Compilation

I have change my parameter in
LinuxBiosV2/targets/advantech/pcm-5823/Config.lb

target pcm-5823
mainboard advantech/pcm-5823

option DEFAULT_CONSOLE_LOGLEVEL=8
option MAXIMUM_CONSOLE_LOGLEVEL=8
option CONFIG_COMPRESSED_PAYLOAD_NRV2B=1

option ROM_SIZE=(256*1024)-(64*1024)-(32*1024)
#option FALLBACK_SIZE = ROM_SIZE

romimage "normal"
        option USE_FALLBACK_IMAGE=0
        option LINUXBIOS_EXTRA_VERSION=".0Normal"
        option ROM_IMAGE_SIZE=64*1024
        payload ../../../../etherboot-5.2.6/src/bin/rtl8139.elf
end

romimage "fallback"
        option USE_FALLBACK_IMAGE=1
        option LINUXBIOS_EXTRA_VERSION=".0Fallback"
        option ROM_IMAGE_SIZE=64*1024
        payload ../../../../etherboot-5.2.6/src/bin/rtl8139.elf
end

buildrom ./linuxbios.rom ROM_SIZE "fallback" "normal"

Adn I have the same error :

LOVER_IMAGE='0' -Os -nostdinc -nostdlib -fno-builtin  -Wall -o
rom_stream.o /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c
/home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:47:90: invalid suffix "x"
on integer constant
/home/ccases/LinuxBIOSv2/src/stream/rom_stream.c: In function `stream_init':
/home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:83: warning: comparison
between pointer and integer
/home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:83: warning: comparison
between pointer and integer
/home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:84: warning: assignment
makes pointer from integer without a cast
make[1]: *** [rom_stream.o] Error 1
make[1]: Leaving directory
`/home/ccases/LinuxBIOSv2/targets/advantech/pcm-5823/pcm-5823/normal'
make: *** [normal/linuxbios.rom] Error 1

I don't now why :(

If anyone has a solution, thank's by advance for your help

regards

CCASES

[LinuxBIOS] Problem on Compilation

[ron minnich]

Hi, I'm sorry, I have not been keeping track of what you are doing?

can you send me (privately) a patch file so i can see what might be going on?

ron

[LinuxBIOS] register dump - Can anybody see??

[sanjay tiwary]

Hi

I am not able to go beyound "Jumping to LinuxBIOS".Initially i thought it is a DRAM problem. But ram test passes. I am also able to read/write from/to RAM.So i guess my jump is not working. But i am not able to find out.
  So, Can anybody see the register dump which is taken before the jmp *%edi.

LinuxBIOS-"2.0.0"".fallback" "Fri Mar 23 18:28:27 IST 2007" starting...
Copying LinuxBIOS to RAM.
Printing eax=00003333
Printing ebx=ffffd14a
Printing ecx=00000000
Printing edx=ffff03f8
Printing esi=ffff7092
Printing edi=00004000
Printing cs=00000008
Printing ds=00000010
End of Register dump
--------------------------------------------

Thanks & regards
  Sanjay
ron minnich  wrote:
  Hi, I'm sorry, I have not been keeping track of what you are doing?

can you send me (privately) a patch file so i can see what might be going on?

ron

[LinuxBIOS] register dump - Can anybody see??

[Stefan Reinauer]

* sanjay tiwary  [070323 14:20]:
> Hi
>
> I am not able to go beyound "Jumping to LinuxBIOS".Initially i thought
> it is a DRAM problem. But ram test passes. I am also able to
> read/write from/to RAM.So i guess my jump is not working. But i am not
> able to find out.
> So, Can anybody see the register dump which is taken before the jmp
> *%edi.
>
> LinuxBIOS-"2.0.0"".fallback" "Fri Mar 23 18:28:27 IST 2007" starting...
> Copying LinuxBIOS to RAM.
> Printing eax=00003333
> Printing ebx=ffffd14a
> Printing ecx=00000000
> Printing edx=ffff03f8
> Printing esi=ffff7092
> Printing edi=00004000
> Printing cs=00000008
> Printing ds=00000010
> End of Register dump

Sorry, this log contains no information useful for debugging the
problem.
> From the log it seems no memory init is done at all?

Is this still the vt8601 northbridge board?
what southbridge? In one of your previous mails you wrote 82C686, 
in another one VT8231?

You don't post any code that would allow people to help you debug the
problem.

The memory test in auto.c is not qualifying. If that jmp does not work,
your memory does not work. It really is that simple. This can be
frustrating, don't despair.

Have you compared northbridge register dumps between linuxbios and the
legacy bios?

[LinuxBIOS] register dump - Can anybody see??

[sanjay tiwary]

Hi Stepen,

I would like to thank you for the movitation you given to me.

A. For the conveniance of clarity, i am again recapitulate the facts/figures about my board.
  1. Northbridge: VT8605  almost similar to VT8601 or VT8603
  2.Southbridge: VT 82C686 which has integrated super I/O controller
  3. CPU: 300Mhz Celeron Processor
  4. Memory: 512 MB SDRAM
  ---------------------------------------------------------
  if any other info, pls let me know

B. 
  --------
      1. In this mail, i am sending you data as much as possible for you 
           comments/suggestion   for improvment the porting process.
      2. Now i would like to ask couple of question. Since raminit does not complain any failure and ramcheck also passes ramtest.Next, code in crt0.S is able to copy the code from ROM to RAM. I am also able to read the code and print them in the serial output.So my question is, if i am able to read/write correct data to/from RAM, why is there doubt on incorrect DRAM initialisation?
  If i am not able to jump to a designated place (0x4000) in RAM simply due incorrect DRAM initialisation, then what are those things which i am not taking care of during DRAM initialization? Can u pls hightlight those area in RAMINIT so that i can re-walk those area.
   3. if really, the DRAM initialization is correct, then what are the factors that may stop/misdirect the control to jump to a correct location in RAM.
  I tried to print the contents from the RAM which is copied from the ROM to RAM in the start of crt0.S, they are byte by byte same as is for c_start.o

4. Are there any role of the register like AX,BX, CX and DX & other index register while control is try to jump at ram location. For reference, i am also printed the contents of the register before jumping i.e jmp *%edi
  5. In my config, i have set DCAHE_RAM =0

6. i have compared the register dump for linuxbios and legacy bios.They are not exactly same. Should i try to cpmpare the entire dump or the register dump of device 00.0 only?

B. I would also like to give you the register dump( for the Device 00.0) of legacy BIOS
       The ouput given below has been taken by lspci
       --------------------------------------------------------------------
  00: 06 11 05 06 06 00 10 22 00 00 00 06 00 00 00 00
  10: 08 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  50: fd db c8 fe 02 00 20 20 e0 00 10 20 20 20 20 20
  60: 3f 2a 00 a0 e6 00 00 00 41 7c 43 0f 08 21 00 00
  70: c4 80 cc 0c 0e a1 d2 00 01 b4 09 00 00 00 00 00
  80: 0f 40 00 00 c0 00 00 00 02 00 00 00 00 00 00 00
  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 27 12 00 00
  b0: c0 ff 10 00 00 00 00 00 00 00 00 00 00 00 00 00
  c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  e0: 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  f0: 00 00 00 00 00 00 04 00 32 42 00 b0 00 00 00 00

C. linuxbios log
  ------------------------------------------------------------------------
  LinuxBIOS-2.0.0.fallback Fri Mar 23 18:50:48 IST 2007 starting...
  01 is the comm register
  SMBus controller enabled
  vt8605  init starting
  00000000 is the north 1106 0605
  0120NOP
  PRECHARGE
  DUMMY READS
  CBR
  MRS
  NORMAL
  set ref. rate
  enable multi-page open
  Register Dump (from LinuxBIOS) for Device 00.0
  --------------------------------------------------
  00:06 11 05 06 06 00 10 22 00 00 00 06 00 00 00 00 
  10:08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 
  40:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  50:ac 08 80 03 00 00 20 20 e0 00 20 20 20 20 20 20 
  60:3f 00 00 30 e6 00 00 00 41 7c 43 01 08 21 00 00 
  70:00 00 00 00 00 00 00 00 01 f0 00 02 00 00 00 00 
  80:00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  a0:02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00 
  b0:80 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 
  d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  e0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  f0:00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00

---Register Dump End here--------------------------
  ---RAM CHECKING (from 0-640K & 1M-16M)-------------
  Testing DRAM : 00000000-000a0000
  DRAM fill: 00000000-000a0000
  00000000 00010000 00020000 00030000  00040000 00050000 
  00060000 00070000 00080000 00090000  000a0000
  DRAM filled
  DRAM verify: 00000000-000a0000
  00000000 00010000 00020000 00030000  00040000 00050000 
  00060000 00070000 00080000 00090000  000a0000
  DRAM range verified.
  Done.

Testing DRAM : 00100000-01000000
  DRAM fill: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 00170000 
  00180000 00190000 001a0000 001b0000 001c0000 001d0000 001e0000 001f0000 
  00200000 00210000 00220000 00230000 00240000 00250000 00260000 00270000 
  00280000 00290000 002a0000 002b0000 002c0000 002d0000 002e0000 002f0000 
  00300000 00310000 00320000 00330000 00340000 00350000 00360000 00370000 
  00380000 00390000 003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 
  00400000 00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 004f0000 
  00500000 00510000 00520000 00530000 00540000 00550000 00560000 00570000 
  00580000 00590000 005a0000 005b0000 005c0000 005d0000 005e0000 005f0000 
  00600000 00610000 00620000 00630000 00640000 00650000 00660000 00670000 
  00680000 00690000 006a0000 006b0000 006c0000 006d0000 006e0000 006f0000 
  00700000 00710000 00720000 00730000 00740000 00750000 00760000 00770000 
  00780000 00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 00870000 
  00880000 00890000 008a0000 008b0000 008c0000 008d0000 008e0000 008f0000 
  00900000 00910000 00920000 00930000 00940000 00950000 00960000 00970000 
  00980000 00990000 009a0000 009b0000 009c0000 009d0000 009e0000 009f0000 
  00a00000 00a10000 00a20000 00a30000 00a40000 00a50000 00a60000 00a70000 
  00a80000 00a90000 00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 
  00b00000 00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 00bf0000 
  00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 00c60000 00c70000 
  00c80000 00c90000 00ca0000 00cb0000 00cc0000 00cd0000 00ce0000 00cf0000 
  00d00000 00d10000 00d20000 00d30000 00d40000 00d50000 00d60000 00d70000 
  00d80000 00d90000 00da0000 00db0000 00dc0000 00dd0000 00de0000 00df0000 
  00e00000 00e10000 00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 
  00e80000 00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 00f70000 
  00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 00fe0000 00ff0000 
  01000000
  DRAM filled
  DRAM verify: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 00170000 
  00180000 00190000 001a0000 001b0000 001c0000 001d0000 001e0000 001f0000 
  00200000 00210000 00220000 00230000 00240000 00250000 00260000 00270000 
  00280000 00290000 002a0000 002b0000 002c0000 002d0000 002e0000 002f0000 
  00300000 00310000 00320000 00330000 00340000 00350000 00360000 00370000 
  00380000 00390000 003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 
  00400000 00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 004f0000 
  00500000 00510000 00520000 00530000 00540000 00550000 00560000 00570000 
  00580000 00590000 005a0000 005b0000 005c0000 005d0000 005e0000 005f0000 
  00600000 00610000 00620000 00630000 00640000 00650000 00660000 00670000 
  00680000 00690000 006a0000 006b0000 006c0000 006d0000 006e0000 006f0000 
  00700000 00710000 00720000 00730000 00740000 00750000 00760000 00770000 
  00780000 00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 00870000 
  00880000 00890000 008a0000 008b0000 008c0000 008d0000 008e0000 008f0000 
  00900000 00910000 00920000 00930000 00940000 00950000 00960000 00970000 
  00980000 00990000 009a0000 009b0000 009c0000 009d0000 009e0000 009f0000 
  00a00000 00a10000 00a20000 00a30000 00a40000 00a50000 00a60000 00a70000 
  00a80000 00a90000 00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 
  00b00000 00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 00bf0000 
  00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 00c60000 00c70000 
  00c80000 00c90000 00ca0000 00cb0000 00cc0000 00cd0000 00ce0000 00cf0000 
  00d00000 00d10000 00d20000 00d30000 00d40000 00d50000 00d60000 00d70000 
  00d80000 00d90000 00da0000 00db0000 00dc0000 00dd0000 00de0000 00df0000 
  00e00000 00e10000 00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 
  00e80000 00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 00f70000 
  00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 00fe0000 00ff0000 
  01000000
  DRAM range verified.
  Done.
  -------------END OF AUTO.C----------------------------------

vt8605 done

-----WE are in crt0.S-------
  Copying LinuxBIOS to RAM.
  --regsister dump when copying is done-----
  Printing eax=00003333
  Printing ebx=ffffd14a      
  Printing ecx=00000000
  Printing edx=ffff03f8
  Printing esi=ffff7094
  Printing edi=00004000
  Printing cs=00000008
  Printing ds=00000010
  End of Register dump

Memory dump (from RAM 0x4000 upto 7094byte)
  [I have intentionaly put some ee at the start of c_start.s for conveniance of identification. I have also deleted some of the last byte for saving space]
  -------------------------------------------
  ee2e0f011538410000ea104000001000b8180000008ed88ec08ed08ee08ee8b013
  e680fc8d3d00600100b90080010029f9c1e90231c0f3ab8d3d2c340100b9e85401
  0029f97407c1e90231c0f3abbc008001006a006a005589e58d3d10dc00008d1da1
  400000b8000010006689d889da66ba008e89470089570483c30683c70881ffb0dc
  000075e30f011d08dc0000b0fee68089ece8a21e0000b0eee680f4ebf96a006a00
  eb726a006a01eb6c6a006a02eb666a006a03eb606a006a04eb5a6a006a05eb546a
  006a06eb4e6a006a07eb486a08eb4490906a006a09eb3c6a0aeb3890906a0beb32
  90906a0ceb2c90906a0deb2690906a0eeb2090906a006a0feb186a006a10eb126a
  11eb0e90906a006a12eb066a006a13eb005756558d6c2420555352515054e8b51e
  00005858595a5b5d5d5e5f83c408cf2700e0db000090905589e56a036a0668f803
  0000e8bf33000083c40cc9c35589e50fb645085068f8030000e838340000585ac9
  c35589e568f8030000e8643400000fb6c0c9c35589e568f8030000e840340000c9
  c39090905589e556538b750868d4c000006a07e8bc0700006a6c56e8b305000083
  c8800fb6c0506a6c56e8330600006a7f6a4156e82906000083c4286a4056e88f05
  00000fb6c0506a4056e8120600006a4256e87b05000083c8f00fb6c0506a4256e8
  fb05000083c4286a4a56e86105000083c8080fb6c0506a4a56e8e10500006a4f56
  e84a05000083c8080fb6c0506a4f56e8ca05000083c4286a036a5856e8bd050000
  83c40c85f6741a6a5156e81f05000083c8180fb6c0506a5156e89f05000083c414
  6a5056e80505000088c30fb6c05068e4c000006a07e8f406000081e3f700000053
  6803c100006a07e8e106000083c420536a5056e8630500006a4c56e8cc04000088
  c389d883e00f50681cc100006a07e8b906000081e3f000000083cb0483c42053683
  6c100006a07e8a0060000536a4c56e8250500006a046a4656e81b05000083c4246a
  036a4756e80e05000068980000006a6e56e8010500006a546a4056e8f704000083c
  4246a00e8c24d00005668ecdc0000684fc100006a06e84d06000083c41485f6742a
  Jumping to LinuxBIOS.
    [After that, it simply hangs]
---------------------------------------------------------------------------
  if any other info is required to get out this problem, pls let me know.

Regards,
  Sanjay
Stefan Reinauer  wrote:

* sanjay tiwary [070323 14:20]:
> Hi
>
> I am not able to go beyound "Jumping to LinuxBIOS".Initially i thought
> it is a DRAM problem. But ram test passes. I am also able to
> read/write from/to RAM.So i guess my jump is not working. But i am not
> able to find out.
> So, Can anybody see the register dump which is taken before the jmp
> *%edi.
>
> LinuxBIOS-"2.0.0"".fallback" "Fri Mar 23 18:28:27 IST 2007" starting...
> Copying LinuxBIOS to RAM.
> Printing eax=00003333
> Printing ebx=ffffd14a
> Printing ecx=00000000
> Printing edx=ffff03f8
> Printing esi=ffff7092
> Printing edi=00004000
> Printing cs=00000008
> Printing ds=00000010
> End of Register dump

Sorry, this log contains no information useful for debugging the
problem.
> From the log it seems no memory init is done at all?

Is this still the vt8601 northbridge board?
what southbridge? In one of your previous mails you wrote 82C686, 
in another one VT8231?

You don't post any code that would allow people to help you debug the
problem.

The memory test in auto.c is not qualifying. If that jmp does not work,
your memory does not work. It really is that simple. This can be
frustrating, don't despair.

Have you compared northbridge register dumps between linuxbios and the
legacy bios?

[LinuxBIOS] register dump - Can anybody see??

[Peter Stuge]

Hi Sanjay,

On Sat, Mar 24, 2007 at 11:49:48AM -0700, sanjay tiwary wrote:
> Now i would like to ask couple of question. Since raminit does
>
> not complain any failure and ramcheck also passes ramtest.Next,
> code in crt0.S is able to copy the code from ROM to RAM. I am also
> able to read the code and print them in the serial output.So my
> question is, if i am able to read/write correct data to/from RAM,
> why is there doubt on incorrect DRAM initialisation?

As you may know, thoroughly testing RAM takes a long time. Much
longer than any BIOS should spend. (Many hours!) There is however a
separate program that does an excellent job at it, if you can, please
try booting memtest86 as a payload with LinuxBIOS.

Until that works and reports zero errors, RAM misconfiguration is
highly likely to cause the boot problems.
> If i am not able to jump to a designated place (0x4000) in RAM
> simply due incorrect DRAM initialisation, then what are those
> things which i am not taking care of during DRAM initialization?
> Can u pls hightlight those area in RAMINIT so that i can re-walk
> those area.

Someone else has to step up here I'm afraid, I don't know enough
details about SDRAM initialization. There was recent mention of an
Intel memory controller data sheet that outlined the steps needed
to bring up RAM on that hardware, it could be used as a guideline
also for your chipset, but ideally you should contact the hardware
vendor and ask them for instructions.
> if really, the DRAM initialization is correct, then what are the
>
> factors that may stop/misdirect the control to jump to a correct
> location in RAM.
> I tried to print the contents from the RAM which is copied from the
> ROM to RAM in the start of crt0.S, they are byte by byte same as is
> for c_start.o

How much contents?

I would suggest printing in hex several kilobyte (start with 10kb)
and then using diff to compare that with a hexdump you make on
another system using hexdump or xxd.
> Are there any role of the register like AX,BX, CX and DX & other
>
> index register while control is try to jump at ram location. For
> reference, i am also printed the contents of the register before
> jumping i.e jmp *%edi

They should not be used for anything.
> In my config, i have set DCAHE_RAM =0

Hm? What's this? Is this cache as ram?
> i have compared the register dump for linuxbios and legacy
>
> bios.They are not exactly same. Should i try to cpmpare the entire
> dump or the register dump of device 00.0 only?

Start with 00.0 and investigate each bit that differs, look it up in
the data sheet and/or contact your hardware vendor to find out what
the bit means.
> ---RAM CHECKING (from 0-640K & 1M-16M)-------------
>   Testing DRAM : 00000000-000a0000
>   DRAM fill: 00000000-000a0000
>   00000000 00010000 00020000 00030000  00040000 00050000 
>   00060000 00070000 00080000 00090000  000a0000
>   DRAM filled
>   DRAM verify: 00000000-000a0000
>   00000000 00010000 00020000 00030000  00040000 00050000 
>   00060000 00070000 00080000 00090000  000a0000
>   DRAM range verified.
>   Done.

Does this test only look at the printed addresses or also everything
between them? How long does the test take? Unless the code spends a
good amount of time in here (I doubt it) it cannot test RAM enough to
make sure it is reliable. Each address should be tested several times
with different types of data. Again, try running memtest86 on some
systems to get an idea of what is needed.
> Memory dump (from RAM 0x4000 upto 7094byte)
>   [I have intentionaly put some ee at the start of c_start.s for
> conveniance of identification. I have also deleted some of the last
> byte for saving space]

Make the same kind of dump for the data on another, running, system
and compare them with software. One bit of error is enough.

//Peter

[LinuxBIOS] VT8605 RAM controller init

[Stefan Reinauer]

* sanjay tiwary  [070324 19:49]:
> 2. Now i would like to ask couple of question. Since raminit does
>
> not complain any failure and ramcheck also passes ramtest.Next, code
> in crt0.S is able to copy the code from ROM to RAM. I am also able to
> read the code and print them in the serial output.So my question is,
> if i am able to read/write correct data to/from RAM, why is there
> doubt on incorrect DRAM initialisation?

because you can not jump to ram. And because of your register dump shows
it. You did at least not set the following registers correctly. (Lots
more, but these are DRAM controller specific)

* 0x50-55 (Phase Control, Defer Timer, Misc, Cacheable regions)
* bank0 dram row ending address is wrong (0x5a)
* dram arbitration control (0x6b)
* dram arbitration timer (0xf8, 0xf9)
> If i am not able to jump to a designated place (0x4000) in RAM simply
> due incorrect DRAM initialisation, then what are those things which i
> am not taking care of during DRAM initialization? Can u pls hightlight
> those area in RAMINIT so that i can re-walk those area.

No idea what is actually wrong in your code. Some wrong/missing bits can
be deduced from the pci config space dumps you sent. More details would
require looking at the code or using a crystal ball.  ;-)
> if really, the DRAM initialization is correct, then what are the
>
> factors that may stop/misdirect the control to jump to a correct
>  location in RAM.  I tried to print the contents from the RAM which is
>  copied from the ROM to RAM in the start of crt0.S, they are byte by
>  byte same as is for c_start.o

The same jump works on 50 other mainboards. It is highly unlikely that a
bug is revealed here. (sorry if I sound monotonous)
> i have compared the register dump for linuxbios and legacy bios.They are not
>
> exactly same. Should i try to cpmpare the entire dump or the register dump of
> device 00.0 only?

Only those of the DRAM controller. consult your VIA PM133 data sheet for
details on which devices need to be touched for DRAM init. Most likely
it is 0:0.0 though.

You're not that far off,... start with comparing 0:0.0  registers with
the data sheet and see how far it gets you

Stefan

[LinuxBIOS] VT8605 RAM controller init

[sanjay tiwary]

Hi Stepen ,
  Thanks !!!

I tried to use the same sequence of RAM initialisation as is in northbridge/via/vt8601/raminit.c but i have use the legacy bios value whenever i am try to program the register you pointed out.
  I have also programmed Reg 50-55 for CPU setup with the proper value from the legacy BIOS.Did proper setting for 0xf8 and 0xf9 at the end of DRAM initialisation.

Still it is not jumping. I guess i am missing somewhere in the sequence of initialisation .
  If u have any pointer , pls let me know.
  Some of the more facts , i would like to tell you
  1.I am enabling Shadow ram before starting the ram initialization. I dont know what impact it will make. Shadow ram register are 0x61, 0x62 and 0x63.
  2. After SDRAM normal operation setiing to the 0x6c register, i am setting 0x5A-0x5F and 0x56,0x57 , 0x58 with the correct value as per the legacy BIOS. (Will this impact??).
  3. I have also include the dump of northbridge device, pls have a look.

----------------------
  You were talking of Crystall Ball, can u tell me in details or any url to get this??
  -----------------------

This is the new log after setting the required register.
  -----------------------------------------------------------------------------------------------
  Enabling vt82c686a_serial ...Enabling UART...Initializing Console ...
  LinuxBIOS-2.0.0.SANJAY Mon Mar 26 03:18:17 IST 2007 starting...
  Enabling Mainboard Devices ...Enabling smbus ...01 is the comm register
  SMBus controller enabled
  Enabling shadow ram...
  Setting SDRAM Registervt8605 init starting
  00000000 is the north
  1106 0605
  01d4 is the computed timing
  Enabling SDRAMNOP
  PRECHARGE
  DUMMY READS
  CBR
  MRS
  NORMAL
  set ref. rate
  enable multi-page open
  Slot 00 is SDRAM 08000000 bytes x2
  0100 is the chip size
  000e is the MA type
  vt8605 done
  Testing DRAM : 00000000-000a0000
  DRAM fill: 00000000-000a0000
  00000000 00010000 00020000 00030000 00040000 00050000 00060000 
  00070000 00080000 00090000 000a0000
  DRAM filled
  DRAM verify: 00000000-000a0000
  00000000 00010000 00020000 00030000 00040000 00050000 00060000 
  00070000 00080000 00090000 000a0000
  DRAM range verified.
  Done.
  Testing DRAM : 00100000-01000000
  DRAM fill: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 
  00170000 00180000 00190000 001a0000 001b0000 001c0000 001d0000 
  001e0000 001f0000 00200000 00210000 00220000 00230000 00240000 
  00250000 00260000 00270000 00280000 00290000 002a0000 002b0000 
  002c0000 002d0000 002e0000 002f0000 00300000 00310000 00320000 
  00330000 00340000 00350000 00360000 00370000 00380000 00390000 
  003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 00400000 
  00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 
  004f0000 00500000 00510000 00520000 00530000 00540000 00550000 
  00560000 00570000 00580000 00590000 005a0000 005b0000 005c0000 
  005d0000 005e0000 005f0000 00600000 00610000 00620000 00630000 
  00640000 00650000 00660000 00670000 00680000 00690000 006a0000 
  006b0000 006c0000 006d0000 006e0000 006f0000 00700000 00710000 
  00720000 00730000 00740000 00750000 00760000 00770000 00780000 
  00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 
  00870000 00880000 00890000 008a0000 008b0000 008c0000 008d0000 
  008e0000 008f0000 00900000 00910000 00920000 00930000 00940000 
  00950000 00960000 00970000 00980000 00990000 009a0000 009b0000 
  009c0000 009d0000 009e0000 009f0000 00a00000 00a10000 00a20000 
  00a30000 00a40000 00a50000 00a60000 00a70000 00a80000 00a90000 
  00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 00b00000 
  00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 
  00bf0000 00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 
  00c60000 00c70000 00c80000 00c90000 00ca0000 00cb0000 00cc0000 
  00cd0000 00ce0000 00cf0000 00d00000 00d10000 00d20000 00d30000 
  00d40000 00d50000 00d60000 00d70000 00d80000 00d90000 00da0000 
  00db0000 00dc0000 00dd0000 00de0000 00df0000 00e00000 00e10000 
  00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 00e80000 
  00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 
  00f70000 00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 
  00fe0000 00ff0000 01000000
  DRAM filled
  DRAM verify: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 
  00170000 00180000 00190000 001a0000 001b0000 001c0000 001d0000 
  001e0000 001f0000 00200000 00210000 00220000 00230000 00240000 
  00250000 00260000 00270000 00280000 00290000 002a0000 002b0000 
  002c0000 002d0000 002e0000 002f0000 00300000 00310000 00320000 
  00330000 00340000 00350000 00360000 00370000 00380000 00390000 
  003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 00400000 
  00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 
  004f0000 00500000 00510000 00520000 00530000 00540000 00550000 
  00560000 00570000 00580000 00590000 005a0000 005b0000 005c0000 
  005d0000 005e0000 005f0000 00600000 00610000 00620000 00630000 
  00640000 00650000 00660000 00670000 00680000 00690000 006a0000 
  006b0000 006c0000 006d0000 006e0000 006f0000 00700000 00710000 
  00720000 00730000 00740000 00750000 00760000 00770000 00780000 
  00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 
  00870000 00880000 00890000 008a0000 008b0000 008c0000 008d0000 
  008e0000 008f0000 00900000 00910000 00920000 00930000 00940000 
  00950000 00960000 00970000 00980000 00990000 009a0000 009b0000 
  009c0000 009d0000 009e0000 009f0000 00a00000 00a10000 00a20000 
  00a30000 00a40000 00a50000 00a60000 00a70000 00a80000 00a90000 
  00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 00b00000 
  00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 
  00bf0000 00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 
  00c60000 00c70000 00c80000 00c90000 00ca0000 00cb0000 00cc0000 
  00cd0000 00ce0000 00cf0000 00d00000 00d10000 00d20000 00d30000 
  00d40000 00d50000 00d60000 00d70000 00d80000 00d90000 00da0000 
  00db0000 00dc0000 00dd0000 00de0000 00df0000 00e00000 00e10000 
  00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 00e80000 
  00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 
  00f70000 00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 
  00fe0000 00ff0000 01000000
  DRAM range verified.
  Done.
  DUMP NORTH
  00:06 11 05 06 06 00 10 22 00 00 00 06 00 00 00 00 
  10:08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 
  40:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  50:fd db c8 fe 02 00 20 20 e0 00 10 20 20 20 20 20 
  60:3f 2a 00 30 e6 00 00 00 41 7c 43 0f 08 21 00 00 
  70:00 00 00 00 00 00 00 00 01 f0 00 02 00 00 00 00 
  80:00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  a0:02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00 
  b0:80 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 
  d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  e0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  f0:00 00 00 00 00 00 04 00 32 42 00 00 00 00 00 00 
  *************End of AUTO.C************
  Copying LinuxBIOS to RAM.
  Jumping to LinuxBIOS.

sanjay tiwary  wrote:
    Hi Stepen,

I would like to thank you for the movitation you given to me.

A. For the conveniance of clarity, i am again recapitulate the facts/figures about my board.
  1. Northbridge: VT8605  almost similar to VT8601 or VT8603
  2.Southbridge: VT 82C686 which has integrated super I/O controller
  3. CPU: 300Mhz Celeron Processor
  4. Memory: 512 MB SDRAM
  ---------------------------------------------------------
  if any other info, pls let me know

B. 
  --------
      1. In this mail, i am sending you data as much as possible for you 
           comments/suggestion   for improvment the porting process.
      2. Now i would like to ask couple of question. Since raminit does not complain any failure and ramcheck also passes ramtest.Next, code in crt0.S is able to copy the code from ROM to RAM. I am also able to read the code and print them in the serial output.So my question is, if i am able to read/write correct data to/from RAM, why is there doubt on incorrect DRAM initialisation?
  If i am not able to jump to a designated place (0x4000) in RAM simply due incorrect DRAM initialisation, then what are those things which i am not taking care of during DRAM initialization? Can u pls hightlight those area in RAMINIT so that i can re-walk those area.
   3. if really, the DRAM initialization is correct, then what are the factors that may stop/misdirect the control to jump to a correct location in RAM.
  I tried to print the contents from the RAM which is copied from the ROM to RAM in the start of crt0.S, they are byte by byte same as is for c_start.o

4. Are there any role of the register like AX,BX, CX and DX & other index register while control is try to jump at ram location. For reference, i am also printed the contents of the register before jumping i.e jmp *%edi
  5. In my config, i have set DCAHE_RAM =0

6. i have compared the register dump for linuxbios and legacy bios.They are not exactly same. Should i try to cpmpare the entire dump or the register dump of device 00.0 only?

B. I would also like to give you the register dump( for the Device 00.0) of legacy BIOS
       The ouput given below has been taken by lspci
       --------------------------------------------------------------------
  00: 06 11 05 06 06 00 10 22 00 00 00 06 00 00 00 00
  10: 08 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  50: fd db c8 fe 02 00 20 20 e0 00 10 20 20 20 20 20
  60: 3f 2a 00 a0 e6 00 00 00 41 7c 43 0f 08 21 00 00
  70: c4 80 cc 0c 0e a1 d2 00 01 b4 09 00 00 00 00 00
  80: 0f 40 00 00 c0 00 00 00 02 00 00 00 00 00 00 00
  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 27 12 00 00
  b0: c0 ff 10 00 00 00 00 00 00 00 00 00 00 00 00 00
  c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  e0: 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  f0: 00 00 00 00 00 00 04 00 32 42 00 b0 00 00 00 00

C. linuxbios log
  ------------------------------------------------------------------------
  LinuxBIOS-2.0.0.fallback Fri Mar 23 18:50:48 IST 2007 starting...
  01 is the comm register
  SMBus controller enabled
  vt8605  init starting
  00000000 is the north 1106 0605
  0120NOP
  PRECHARGE
  DUMMY READS
  CBR
  MRS
  NORMAL
  set ref. rate
  enable multi-page open
  Register Dump (from LinuxBIOS) for Device 00.0
  --------------------------------------------------
  00:06 11 05 06 06 00 10 22 00 00 00 06 00 00 00 00 
  10:08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 
  40:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  50:ac 08 80 03 00 00 20 20 e0 00 20 20 20 20 20 20 
  60:3f 00 00 30 e6 00 00 00 41 7c 43 01 08 21 00 00 
  70:00 00 00 00 00 00 00 00 01 f0 00 02 00 00 00 00 
  80:00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  a0:02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00 
  b0:80 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 
  d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  e0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
  f0:00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00

---Register Dump End here--------------------------
  ---RAM CHECKING (from 0-640K & 1M-16M)-------------
  Testing DRAM : 00000000-000a0000
  DRAM fill: 00000000-000a0000
  00000000 00010000 00020000 00030000  00040000 00050000 
  00060000 00070000 00080000 00090000  000a0000
  DRAM filled
  DRAM verify: 00000000-000a0000
  00000000 00010000 00020000 00030000  00040000 00050000 
  00060000 00070000 00080000 00090000  000a0000
  DRAM range verified.
  Done.

Testing DRAM : 00100000-01000000
  DRAM fill: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 00170000 
  00180000 00190000 001a0000 001b0000 001c0000 001d0000 001e0000 001f0000 
  00200000 00210000 00220000 00230000 00240000 00250000 00260000 00270000 
  00280000 00290000 002a0000 002b0000 002c0000 002d0000 002e0000 002f0000 
  00300000 00310000 00320000 00330000 00340000 00350000 00360000 00370000 
  00380000 00390000 003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 
  00400000 00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 004f0000 
  00500000 00510000 00520000 00530000 00540000 00550000 00560000 00570000 
  00580000 00590000 005a0000 005b0000 005c0000 005d0000 005e0000 005f0000 
  00600000 00610000 00620000 00630000 00640000 00650000 00660000 00670000 
  00680000 00690000 006a0000 006b0000 006c0000 006d0000 006e0000 006f0000 
  00700000 00710000 00720000 00730000 00740000 00750000 00760000 00770000 
  00780000 00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 00870000 
  00880000 00890000 008a0000 008b0000 008c0000 008d0000 008e0000 008f0000 
  00900000 00910000 00920000 00930000 00940000 00950000 00960000 00970000 
  00980000 00990000 009a0000 009b0000 009c0000 009d0000 009e0000 009f0000 
  00a00000 00a10000 00a20000 00a30000 00a40000 00a50000 00a60000 00a70000 
  00a80000 00a90000 00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 
  00b00000 00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 00bf0000 
  00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 00c60000 00c70000 
  00c80000 00c90000 00ca0000 00cb0000 00cc0000 00cd0000 00ce0000 00cf0000 
  00d00000 00d10000 00d20000 00d30000 00d40000 00d50000 00d60000 00d70000 
  00d80000 00d90000 00da0000 00db0000 00dc0000 00dd0000 00de0000 00df0000 
  00e00000 00e10000 00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 
  00e80000 00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 00f70000 
  00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 00fe0000 00ff0000 
  01000000
  DRAM filled
  DRAM verify: 00100000-01000000
  00100000 00110000 00120000 00130000 00140000 00150000 00160000 00170000 
  00180000 00190000 001a0000 001b0000 001c0000 001d0000 001e0000 001f0000 
  00200000 00210000 00220000 00230000 00240000 00250000 00260000 00270000 
  00280000 00290000 002a0000 002b0000 002c0000 002d0000 002e0000 002f0000 
  00300000 00310000 00320000 00330000 00340000 00350000 00360000 00370000 
  00380000 00390000 003a0000 003b0000 003c0000 003d0000 003e0000 003f0000 
  00400000 00410000 00420000 00430000 00440000 00450000 00460000 00470000 
  00480000 00490000 004a0000 004b0000 004c0000 004d0000 004e0000 004f0000 
  00500000 00510000 00520000 00530000 00540000 00550000 00560000 00570000 
  00580000 00590000 005a0000 005b0000 005c0000 005d0000 005e0000 005f0000 
  00600000 00610000 00620000 00630000 00640000 00650000 00660000 00670000 
  00680000 00690000 006a0000 006b0000 006c0000 006d0000 006e0000 006f0000 
  00700000 00710000 00720000 00730000 00740000 00750000 00760000 00770000 
  00780000 00790000 007a0000 007b0000 007c0000 007d0000 007e0000 007f0000 
  00800000 00810000 00820000 00830000 00840000 00850000 00860000 00870000 
  00880000 00890000 008a0000 008b0000 008c0000 008d0000 008e0000 008f0000 
  00900000 00910000 00920000 00930000 00940000 00950000 00960000 00970000 
  00980000 00990000 009a0000 009b0000 009c0000 009d0000 009e0000 009f0000 
  00a00000 00a10000 00a20000 00a30000 00a40000 00a50000 00a60000 00a70000 
  00a80000 00a90000 00aa0000 00ab0000 00ac0000 00ad0000 00ae0000 00af0000 
  00b00000 00b10000 00b20000 00b30000 00b40000 00b50000 00b60000 00b70000 
  00b80000 00b90000 00ba0000 00bb0000 00bc0000 00bd0000 00be0000 00bf0000 
  00c00000 00c10000 00c20000 00c30000 00c40000 00c50000 00c60000 00c70000 
  00c80000 00c90000 00ca0000 00cb0000 00cc0000 00cd0000 00ce0000 00cf0000 
  00d00000 00d10000 00d20000 00d30000 00d40000 00d50000 00d60000 00d70000 
  00d80000 00d90000 00da0000 00db0000 00dc0000 00dd0000 00de0000 00df0000 
  00e00000 00e10000 00e20000 00e30000 00e40000 00e50000 00e60000 00e70000 
  00e80000 00e90000 00ea0000 00eb0000 00ec0000 00ed0000 00ee0000 00ef0000 
  00f00000 00f10000 00f20000 00f30000 00f40000 00f50000 00f60000 00f70000 
  00f80000 00f90000 00fa0000 00fb0000 00fc0000 00fd0000 00fe0000 00ff0000 
  01000000
  DRAM range verified.
  Done.
  -------------END OF AUTO.C----------------------------------

vt8605 done

-----WE are in crt0.S-------
  Copying LinuxBIOS to RAM.
  --regsister dump when copying is done-----
  Printing eax=00003333
  Printing ebx=ffffd14a      
  Printing ecx=00000000
  Printing edx=ffff03f8
  Printing esi=ffff7094
  Printing edi=00004000
  Printing cs=00000008
  Printing ds=00000010
  End of Register dump

Memory dump (from RAM 0x4000 upto 7094byte)
  [I have intentionaly put some ee at the start of c_start.s for conveniance of identification. I have also deleted some of the last byte for saving space]
  -------------------------------------------
  ee2e0f011538410000ea104000001000b8180000008ed88ec08ed08ee08ee8b013
  e680fc8d3d00600100b90080010029f9c1e90231c0f3ab8d3d2c340100b9e85401
  0029f97407c1e90231c0f3abbc008001006a006a005589e58d3d10dc00008d1da1
  400000b8000010006689d889da66ba008e89470089570483c30683c70881ffb0dc
  000075e30f011d08dc0000b0fee68089ece8a21e0000b0eee680f4ebf96a006a00
  eb726a006a01eb6c6a006a02eb666a006a03eb606a006a04eb5a6a006a05eb546a
  006a06eb4e6a006a07eb486a08eb4490906a006a09eb3c6a0aeb3890906a0beb32
  90906a0ceb2c90906a0deb2690906a0eeb2090906a006a0feb186a006a10eb126a
  11eb0e90906a006a12eb066a006a13eb005756558d6c2420555352515054e8b51e
  00005858595a5b5d5d5e5f83c408cf2700e0db000090905589e56a036a0668f803
  0000e8bf33000083c40cc9c35589e50fb645085068f8030000e838340000585ac9
  c35589e568f8030000e8643400000fb6c0c9c35589e568f8030000e840340000c9
  c39090905589e556538b750868d4c000006a07e8bc0700006a6c56e8b305000083
  c8800fb6c0506a6c56e8330600006a7f6a4156e82906000083c4286a4056e88f05
  00000fb6c0506a4056e8120600006a4256e87b05000083c8f00fb6c0506a4256e8
  fb05000083c4286a4a56e86105000083c8080fb6c0506a4a56e8e10500006a4f56
  e84a05000083c8080fb6c0506a4f56e8ca05000083c4286a036a5856e8bd050000
  83c40c85f6741a6a5156e81f05000083c8180fb6c0506a5156e89f05000083c414
  6a5056e80505000088c30fb6c05068e4c000006a07e8f406000081e3f700000053
  6803c100006a07e8e106000083c420536a5056e8630500006a4c56e8cc04000088
  c389d883e00f50681cc100006a07e8b906000081e3f000000083cb0483c42053683
  6c100006a07e8a0060000536a4c56e8250500006a046a4656e81b05000083c4246a
  036a4756e80e05000068980000006a6e56e8010500006a546a4056e8f704000083c
  4246a00e8c24d00005668ecdc0000684fc100006a06e84d06000083c41485f6742a
  Jumping to LinuxBIOS.
    [After that, it simply hangs]
---------------------------------------------------------------------------
  if any other info is required to get out this problem, pls let me know.

Regards,
  Sanjay
Stefan Reinauer  wrote:

* sanjay tiwary [070323 14:20]:
> Hi
>
> I am not able to go beyound "Jumping to LinuxBIOS".Initially i thought
> it is a DRAM problem. But ram test passes. I am also able to
> read/write from/to RAM.So i guess my jump is not working. But i am not
> able to find out.
> So, Can anybody see the register dump which is taken before the jmp
> *%edi.
>
> LinuxBIOS-"2.0.0"".fallback" "Fri Mar 23 18:28:27 IST 2007" starting...
> Copying LinuxBIOS to RAM.
> Printing eax=00003333
> Printing ebx=ffffd14a
> Printing ecx=00000000
> Printing edx=ffff03f8
> Printing esi=ffff7092
> Printing edi=00004000
> Printing cs=00000008
> Printing ds=00000010
> End of Register dump

Sorry, this log contains no information useful for debugging the
problem.
> From the log it seems no memory init is done at all?

Is this still the vt8601 northbridge board?
what southbridge? In one of your previous mails you wrote 82C686, 
in another one VT8231?

You don't post any code that would allow people to help you debug the
problem.

The memory test in auto.c is not qualifying. If that jmp does not work,
your memory does not work. It really is that simple. This can be
frustrating, don't despair.

Have you compared northbridge register dumps between linuxbios and the
legacy bios?