Alexandru Gagniuc (mr.nuke.me@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1257
-gerrit
commit df28e7ec541ab07bdf1814720c4302e7b2bab1ba Author: Alexandru Gagniuc mr.nuke.me@gmail.com Date: Tue Aug 7 19:38:32 2012 -0500
VIA Nano: Add support for VIA Nano CPUs
Add code to do the following for the VIA Nano CPUs - Update microcode - Set maximum frequency - Initialize power states - Set up cache
Attempting to change the voltage or frequency of the CPU without applying the microcode update will hang the CPU, so we only do transitions if we can verify the microcode has been updated.
The microcode is updated directly from CBFS. No microcode is included in ramstage. The microcode is not included in this commit.
To get the microcode, run bios_extract on the manufacturer supplied BIOS, and look for the file marked "P6 Microcode". Include this file in CBFS. You can have the build system include this file automatically by selecting Expert Mode, then look under 'Chipset' -> 'Include CPU microcode in CBFS' -> Include external microcode file (check) 'Path and filename of CPU microcode' should contain the location of the microcode file previously extracted.
Change-Id: I586aaca5715e047b42ef901d66772ace0e6b655e Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com --- src/cpu/via/Kconfig | 1 + src/cpu/via/Makefile.inc | 6 +- src/cpu/via/nano/Kconfig | 41 ++++++++ src/cpu/via/nano/Makefile.inc | 33 +++++++ src/cpu/via/nano/nano_init.c | 204 ++++++++++++++++++++++++++++++++++++++++ src/cpu/via/nano/update_ucode.c | 150 +++++++++++++++++++++++++++++ src/cpu/via/nano/update_ucode.h | 73 ++++++++++++++ 7 files changed, 505 insertions(+), 3 deletions(-)
diff --git a/src/cpu/via/Kconfig b/src/cpu/via/Kconfig index 570d408..5c38c91 100644 --- a/src/cpu/via/Kconfig +++ b/src/cpu/via/Kconfig @@ -1,2 +1,3 @@ source src/cpu/via/c3/Kconfig source src/cpu/via/c7/Kconfig +source src/cpu/via/nano/Kconfig diff --git a/src/cpu/via/Makefile.inc b/src/cpu/via/Makefile.inc index 2616111..f1e198d 100644 --- a/src/cpu/via/Makefile.inc +++ b/src/cpu/via/Makefile.inc @@ -1,3 +1,3 @@ -subdirs-$(CONFIG_CPU_VIA_C7) += c7 -subdirs-$(CONFIG_CPU_VIA_C3) += c3 - +subdirs-$(CONFIG_CPU_VIA_C7) += c7 +subdirs-$(CONFIG_CPU_VIA_C3) += c3 +subdirs-$(CONFIG_CPU_VIA_NANO) += nano diff --git a/src/cpu/via/nano/Kconfig b/src/cpu/via/nano/Kconfig new file mode 100644 index 0000000..3b1c213 --- /dev/null +++ b/src/cpu/via/nano/Kconfig @@ -0,0 +1,41 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Alexandru Gagniuc mr.nuke.me@gmail.com +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see http://www.gnu.org/licenses/. +## + +config CPU_VIA_NANO + bool + +if CPU_VIA_NANO + +config CPU_SPECIFIC_OPTIONS + def_bool y + select UDELAY_TSC + select MMX + select SSE2 + select CACHE_AS_RAM + select CPU_MICROCODE_IN_CBFS + +config DCACHE_RAM_BASE + hex + default 0xffe00000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +endif # CPU_VIA_NANO diff --git a/src/cpu/via/nano/Makefile.inc b/src/cpu/via/nano/Makefile.inc new file mode 100644 index 0000000..6b0c1e9 --- /dev/null +++ b/src/cpu/via/nano/Makefile.inc @@ -0,0 +1,33 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see http://www.gnu.org/licenses/. +## + +subdirs-y += ../../x86/tsc +subdirs-y += ../../x86/mtrr +subdirs-y += ../../x86/lapic +subdirs-y += ../../x86/cache +subdirs-y += ../../x86/smm + +driver-y += nano_init.c +ramstage-y += update_ucode.c + +# We need to hear from VIA to get permission to include this file in the +# official coreboot repository. Until then, we leave this commented out +# cpu-microcode-y += nano_ucode_blob.c + +cpu_incs += $(src)/cpu/via/car/cache_as_ram.inc diff --git a/src/cpu/via/nano/nano_init.c b/src/cpu/via/nano/nano_init.c new file mode 100644 index 0000000..417119f --- /dev/null +++ b/src/cpu/via/nano/nano_init.c @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +#include "update_ucode.h" +#include <console/console.h> +#include <device/device.h> +#include <cpu/cpu.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/cache.h> +#include <delay.h> + +#define MODEL_NANO 0x2 +#define MODEL_NANO_3000_B0 0x8 +#define MODEL_NANO_3000_B2 0xa + +#define MSR_IA32_PERF_STATUS 0x00000198 +#define MSR_IA32_PERF_CTL 0x00000199 +#define MSR_IA32_MISC_ENABLE 0x000001a0 +#define NANO_MYSTERIOUS_MSR 0x120e + +static void nano_finish_fid_vid_transition(void) +{ + + msr_t msr; + /* Wait until the power transition ends */ + int cnt = 0; + do { + udelay(16); + msr = rdmsr(MSR_IA32_PERF_STATUS); + cnt++; + if (cnt > 128) { + printk(BIOS_WARNING, + "Error while updating multiplier and voltage\n"); + break; + } + } while (msr.lo & ((1 << 16) | (1 << 17))); + + /* Print the new FID and Voltage */ + u8 cur_vid = (msr.lo >> 0) & 0xff; + u8 cur_fid = (msr.lo >> 8) & 0xff; + printk(BIOS_INFO, "New CPU multiplier: %dx\n", cur_fid); + printk(BIOS_INFO, "New Voltage ID : %dx\n", cur_vid); +} + +static void nano_set_max_fid_vid(void) +{ + msr_t msr; + /* Get voltage and frequency info */ + msr = rdmsr(MSR_IA32_PERF_STATUS); + u8 min_fid = (msr.hi >> 24); + u8 max_fid = (msr.hi >> 8) & 0xff; + u8 min_vid = (msr.hi >> 16) & 0xff; + u8 max_vid = (msr.hi >> 0) & 0xff; + u8 cur_vid = (msr.lo >> 0) & 0xff; + u8 cur_fid = (msr.lo >> 8) & 0xff; + + printk(BIOS_INFO, "CPU multiplier: %dx (min %dx; max %dx)\n", + cur_fid, min_fid, max_fid); + printk(BIOS_INFO, "Voltage ID : %dx (min %dx; max %dx)\n", + cur_vid, min_vid, max_vid); + + if( (cur_fid != max_fid) || (cur_vid != max_vid) ) { + /* Set highest frequency and VID */ + msr.lo = msr.hi; + msr.hi = 0; + wrmsr(MSR_IA32_PERF_CTL, msr); + /* Wait for the transition to complete, otherwise, the CPU + * might reset itself repeatedly */ + nano_finish_fid_vid_transition(); + } + /* As a side note, if we didn't update the microcode by this point, the + * second PLL will not lock correctly. The clock will still be provided + * by the first PLL, and execution will continue normally, ___until___ + * the CPU switches PLL. Once that happens we will no longer have a + * working clock source, and the CPU will hang + * Moral of the story: update the microcode, or don't change FID + * This check is handled before calling nano_power() */ +} + +static void nano_power(void) +{ + msr_t msr; + /* Enable Powersaver */ + msr = rdmsr(MSR_IA32_MISC_ENABLE); + msr.lo |= (1 << 16); + wrmsr(MSR_IA32_MISC_ENABLE, msr); + + /* Enable 6 bit or 7-bit VRM support + * This MSR is not documented by VIA docs, other than setting these + * bits */ + msr = rdmsr(NANO_MYSTERIOUS_MSR); + msr.lo |= ( (1<<7) | (1<<4) ); + /* FIXME: Do we have a 6-bit or 7-bit VRM? + * set bit [5] for 7-bit, or don't set it for 6 bit VRM + * This will probably require a Kconfig option + * My board has a 7-bit VRM, so I can't test the 6-bit VRM stuff */ + msr.lo |= (1<<5); + wrmsr(NANO_MYSTERIOUS_MSR, msr); + + /* Set the maximum frequency and voltage */ + nano_set_max_fid_vid(); + + /* Enable TM3 */ + msr = rdmsr(MSR_IA32_MISC_ENABLE); + msr.lo |= ( (1<<3) | (1<<13) ); + wrmsr(MSR_IA32_MISC_ENABLE, msr); + + u8 stepping = ( cpuid_eax(0x1) ) &0xf; + if(stepping >= MODEL_NANO_3000_B0) { + /* Hello Nano 3000. The Terminator needs a CPU upgrade */ + /* Enable C1e, C2e, C3e, and C4e states */ + msr = rdmsr(MSR_IA32_MISC_ENABLE); + msr.lo |= ( (1<<25) | (1<<26) | (1<<31)); /* C1e, C2e, C3e */ + msr.hi |= (1<<0); /* C4e */ + wrmsr(MSR_IA32_MISC_ENABLE, msr); + } + + /* Lock on Powersaver */ + msr = rdmsr(MSR_IA32_MISC_ENABLE); + msr.lo |= (1<<20); + wrmsr(MSR_IA32_MISC_ENABLE, msr); +} + +static void nano_init(device_t dev) +{ + struct cpuinfo_x86 c; + + get_fms(&c, dev->device); + + /* We didn't test this on the Nano 1000/2000 series, so warn the user */ + if(c.x86_mask < MODEL_NANO_3000_B0) { + printk(BIOS_EMERG, "WARNING: This CPU has not been tested. " + "Please report any issues encountered. \n"); + } + switch (c.x86_mask) { + case MODEL_NANO: + printk(BIOS_INFO, "VIA Nano"); + break; + case MODEL_NANO_3000_B0: + printk(BIOS_INFO, "VIA Nano 3000 rev B0"); + break; + case MODEL_NANO_3000_B2: + printk(BIOS_INFO, "VIA Nano 3000 rev B2"); + break; + default: + printk(BIOS_EMERG, "Stepping not recognized: %x\n", c.x86_mask); + } + printk(BIOS_INFO, "\n"); + + /* We only read microcode from CBFS. If we don't have any microcode in + * CBFS, we'll just get back with 0 updates. User choice FTW. */ + unsigned int n_updates = nano_update_ucode(); + + if(n_updates != 0){ + nano_power(); + } else { + /* Changing the frequency or voltage without first updating the + * microcode will hang the CPU, so just don't do it */ + printk(BIOS_EMERG, "WARNING: CPU Microcode not updated.\n" + " Will not change frequency, as this may hang the CPU.\n"); + } + + /* Turn on cache */ + x86_enable_cache(); + /* Set up Memory Type Range Registers */ + x86_setup_mtrrs(); + x86_mtrr_check(); + /* Enable the local cpu apics */ + setup_lapic(); +} + +static struct device_operations cpu_dev_ops = { + .init = nano_init, +}; + +static struct cpu_device_id cpu_table[] = { + {X86_VENDOR_CENTAUR, 0x06f2}, // VIA NANO 1000/2000 Series + {X86_VENDOR_CENTAUR, 0x06f8}, // VIA NANO 3000 rev B0 + {X86_VENDOR_CENTAUR, 0x06fa}, // VIA NANO 3000 rev B2 + {0, 0}, +}; + +static const struct cpu_driver driver __cpu_driver = { + .ops = &cpu_dev_ops, + .id_table = cpu_table, +}; diff --git a/src/cpu/via/nano/update_ucode.c b/src/cpu/via/nano/update_ucode.c new file mode 100644 index 0000000..8f7ee22 --- /dev/null +++ b/src/cpu/via/nano/update_ucode.c @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +#include "update_ucode.h" +#include <cpu/x86/msr.h> +#include <console/console.h> +#include <stddef.h> +#include <cpu/cpu.h> +#include <arch/cpu.h> +#include <cbfs.h> + +static ucode_update_status nano_apply_ucode(const nano_ucode_header *ucode) +{ + printk(BIOS_SPEW, "Attempting to apply microcode update\n"); + + msr_t msr; + /* Address of ucode block goes in msr.lo for 32-bit mode + * Now remember, we need to pass the address of the actual microcode, + * not the header. The header is just there to help us. */ + msr.lo = (unsigned int)(&(ucode->ucode_start)); + msr.hi = 0; + wrmsr(MSR_IA32_BIOS_UPDT_TRIG, msr); + + /* Let's see if we updated succesfully */ + msr = rdmsr(MSR_UCODE_UPDATE_STATUS); + + return msr.lo & 0x07; +} + +static void nano_print_ucode_info(const nano_ucode_header *ucode) +{ + printk(BIOS_SPEW, "Microcode update information:\n"); + printk(BIOS_SPEW, "Name: %8s\n", ucode->name ); + printk(BIOS_SPEW, "Date: %u/%u/%u\n", ucode->month, + ucode->day, ucode->year ); +} + +static ucode_validity nano_ucode_is_valid(const nano_ucode_header *ucode) +{ + /* We must have a valid signature */ + if(ucode->signature != NANO_UCODE_SIGNATURE) + return NANO_UCODE_SIGNATURE_ERROR; + /* The size of the head must be exactly 12 double words */ + if( (ucode->total_size - ucode->payload_size) != NANO_UCODE_HEADER_SIZE) + return NANO_UCODE_WRONG_SIZE; + + /* How about a checksum ? Checksum must be 0 + * Two's complement done over the entire file, including the header */ + int i; + u32 check = 0; + u32 *raw = (void*) ucode; + for(i = 0 ; i < ((ucode->total_size) >> 2); i++) { + check += raw[i]; + } + if(check != 0) + return NANO_UCODE_CHECKSUM_FAIL; + /* Made it here huh? Then it looks valid to us. + * If there's anything else wrong, the CPU will reject the update */ + return NANO_UCODE_VALID; +} + +static void nano_print_ucode_status(ucode_update_status stat) +{ + switch(stat) + { + case UCODE_UPDATE_SUCCESS: + printk(BIOS_INFO, "Microcode update succesful.\n"); + break; + case UCODE_UPDATE_FAIL: + printk(BIOS_ALERT, "Microcode update failed, bad environment." + "Update was not applied.\n"); + break; + case UCODE_UPDATE_WRONG_CPU: + printk(BIOS_ALERT, "Update not applicable to this CPU.\n"); + break; + case UCODE_INVALID_UPDATE_BLOCK: + printk(BIOS_ALERT, "Microcode block invalid." + "Update was not applied.\n"); + break; + default: + printk(BIOS_ALERT, "Unknown status. No update applied.\n"); + } +} + +unsigned int nano_update_ucode(void) +{ + size_t i; + unsigned int n_updates = 0; + const struct cbfs_file *cbfs_ucode; + u32 fms = cpuid_eax(0x1); + + cbfs_ucode = cbfs_find("cpu_microcode_blob.bin"); + /* Oops, did you forget to include the microcode ? */ + if(cbfs_ucode == NULL) { + printk(BIOS_ALERT, "WARNING: No microcode file found in CBFS. " + "Aborting microcode updates\n"); + return 0; + } + + /* Considering we are running with eXecute-In-Place (XIP), there's no + * need to worry that accessing data from ROM will slow us down. + * Microcode data should be aligned to a 4-byte boundary, but CBFS + * already does that for us (Do you, CBFS?) */ + const u32 *ucode_data = CBFS_SUBHEADER(cbfs_ucode); + const u32 ucode_len = ntohl(cbfs_ucode->len); + + /* We might do a lot of loops searching for the microcode updates, but + * keep in mind, nano_ucode_is_valid searches for the signature before + * doing anything else. */ + for( i = 0; i < (ucode_len >> 2); /* don't increment i here */ ) + { + ucode_update_status stat; + const nano_ucode_header * ucode = (void *)(&ucode_data[i]); + if(nano_ucode_is_valid(ucode) != NANO_UCODE_VALID) { + i++; + continue; + } + /* Since we have a valid microcode, there's no need to search + * in this region, so we restart our search at the end of this + * microcode */ + i += (ucode->total_size >> 2); + /* Is the microcode compatible with our CPU? */ + if(ucode->applicable_fms != fms) continue; + /* For our most curious users */ + nano_print_ucode_info(ucode); + /* The meat of the pie */ + stat = nano_apply_ucode(ucode); + /* The user might want to know how the update went */ + nano_print_ucode_status(stat); + if(stat == UCODE_UPDATE_SUCCESS) n_updates++; + } + + return n_updates; +} diff --git a/src/cpu/via/nano/update_ucode.h b/src/cpu/via/nano/update_ucode.h new file mode 100644 index 0000000..6a22d18 --- /dev/null +++ b/src/cpu/via/nano/update_ucode.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ +#ifndef __UPDATE_UCODE_H +#define __UPDATE_UCODE_H + +#include <console/console.h> +#include <cpu/cpu.h> + +#define MSR_IA32_BIOS_UPDT_TRIG 0x00000079 +#define MSR_IA32_BIOS_SIGN_ID 0x0000008b +#define MSR_UCODE_UPDATE_STATUS 0x00001205 + +#define NANO_UCODE_SIGNATURE 0x53415252 +#define NANO_UCODE_HEADER_SIZE 0x30 + +/* These are values returned by the CPU after we attempt microcode updates. + * We care what these values are exactly, so we define them to be sure */ +typedef enum { + UCODE_UPDATE_NOT_ATTEMPTED = 0x0, + UCODE_UPDATE_SUCCESS = 0x1, + UCODE_UPDATE_FAIL = 0x2, + UCODE_UPDATE_WRONG_CPU = 0x3, + UCODE_INVALID_UPDATE_BLOCK = 0x4, +} ucode_update_status; + + +typedef enum { + NANO_UCODE_VALID = 0, /* We only care that valid == 0 */ + NANO_UCODE_SIGNATURE_ERROR, + NANO_UCODE_WRONG_SIZE, + NANO_UCODE_CHECKSUM_FAIL, +} ucode_validity; + +typedef struct { + u32 signature; /* NANO_UCODE_SIGNATURE */ + u32 update_revision; /* Revision of the update header */ + u16 year; /* Year of patch release */ + u8 day; /* Day of patch release */ + u8 month; /* Month of patch release */ + u32 applicable_fms; /* Fam/model/stepping to which ucode applies */ + u32 checksum; /* Two's complement checksum of ucode+header */ + u32 loader_revision; /* Revision of hardware ucode update loader*/ + u32 rfu_1; /* Reservod for future use */ + u32 payload_size; /* Size of the ucode payload only */ + u32 total_size; /* Size of the ucode, including header */ + char name[8]; /* ASCII string of ucode filename */ + u32 rfu_2; /* Reservod for future use */ + /* First double-word of the ucode payload + * Its address represents the beginning of the ucode update we need to + * send to the CPU */ + u32 ucode_start; + +} nano_ucode_header; + +unsigned int nano_update_ucode(void); + +#endif /* __UPDATE_UCODE_H */
-
Alexandru Gagniuc