[commit] r6013 - trunk/src/southbridge/via/k8t890

[repository service]

Author: ruik
Date: Tue Nov  2 22:24:29 2010
New Revision: 6013
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6013

Log:
Need to clear downstream read cycle retry bit, or the bus scan will
hang.  Also need to set lane config to 0x00 for autonegotiation.

Signed-off-by: Tobias Diedrich 
Acked-by: Rudolf Marek

Modified:
   trunk/src/southbridge/via/k8t890/k8t890_pcie.c

Modified: trunk/src/southbridge/via/k8t890/k8t890_pcie.c
==============================================================================
--- trunk/src/southbridge/via/k8t890/k8t890_pcie.c	Tue Nov  2 21:54:37 2010	(r6012)
+++ trunk/src/southbridge/via/k8t890/k8t890_pcie.c	Tue Nov  2 22:24:29 2010	(r6013)
@@ -35,7 +35,23 @@
    reg = pci_read_config8(dev, 0x50);
    pci_write_config8(dev, 0x50, reg | 0x10);

-	/* Award has 0xb, VIA recomends 0x4. */
+	/* Disable downstream read cycle retry,
+	 * otherwise the bus scan will hang if no device is plugged in. */
+	reg = pci_read_config8(dev, 0xa3);
+	pci_write_config8(dev, 0xa3, reg & ~0x01);
+
+	/* Use PHY negotiation for lane config */
+	reg = pci_read_config8(dev, 0xc1);
+	pci_write_config8(dev, 0xc1, reg & ~0x1f);
+
+	/* Award has 0xb, VIA recommends 0xd, default 0x8.
+	 * bit4: receive polarity change control
+	 * bits3:2: squelch window select 64~175mv
+	 * bit1: Number of non-idle bits detected before exiting idle state
+	 *       0: 10 bits, 1: 2 bits
+	 * bit0: Number of idle bits detected before entering idle state
+	 *       0: 10 bits, 1: 2 bits
+	 */
    pci_write_config8(dev, 0xe1, 0xb);

/*
@@ -75,8 +91,25 @@
    reg = pci_read_config8(dev, 0x50);
    pci_write_config8(dev, 0x50, reg | 0x10);

-	/* Award has 0xb, VIA recommends 0x4. */
+	/* Disable downstream read cycle retry,
+	 * otherwise the bus scan will hang if no device is plugged in. */
+	reg = pci_read_config8(dev, 0xa3);
+	pci_write_config8(dev, 0xa3, reg & ~0x01);
+
+	/* Use PHY negotiation for lane config */
+	reg = pci_read_config8(dev, 0xc1);
+	pci_write_config8(dev, 0xc1, reg & ~0x1f);
+
+	/* Award has 0xb, VIA recommends 0xd, default 0x8.
+	 * bit4: receive polarity change control
+	 * bits3:2: squelch window select 64~175mv
+	 * bit1: Number of non-idle bits detected before exiting idle state
+	 *       0: 10 bits, 1: 2 bits
+	 * bit0: Number of idle bits detected before entering idle state
+	 *       0: 10 bits, 1: 2 bits
+	 */
    pci_write_config8(dev, 0xe1, 0xb);
+
    /* Set replay timer limit. */
    pci_write_config8(dev, 0xb1, 0xf0);