On Thursday 28 September 2006 21:51, ollie wrote:
On Thu, 2006-09-28 at 21:09 +0200, Philipp Degler wrote:
Am Donnerstag, 28. September 2006 19:49 schrieb ollie:
On Thu, 2006-09-28 at 18:03 +0200, Philipp Degler wrote:
Am Mittwoch, 27. September 2006 22:20 schrieb ollie:
On Wed, 2006-09-27 at 21:13 +0200, Philipp Degler wrote:
Right now we have all on-board devices working. Even xorg shows up. Only exception is native vga-bios. It gets loaded but just a few lines of LB-boot are printed. Anyway at least our HTX adaptor card is working :)
Any serial console log when it is initializing VGA?
I attached you the capture file of my console log if i boot with option CONFIG_CONSOLE_VGA = 1 option CONFIG_PCI_ROM_RUN = 1 option CONFIG_CONSOLE_BTEXT = 0
instead of option CONFIG_CONSOLE_VGA = 0 option CONFIG_PCI_ROM_RUN = 0 option CONFIG_CONSOLE_BTEXT = 1
to mention. I can already see something on the screen.
The log looks alright. What is the problem exactly?
The last line of the log is also the last line on the screen. After this last line "for IRQ, reg 0x00000017 value 0x00010000 0x00000000" the system hangs completely.
Does this happen when VGA is disabled?
no, and if we use "dir /drivers/ati/ragexl" we even have xorg running. Switching on CONFIG_PCI_ROM_RUN and CONFIG_CONSOLE_VGA leads to this behavior.
We prepared rom image as described in the online vga howto.
Where does these lines come from? Your modification to LB?
Ollie
-
Philipp Degler