Re: [coreboot] coreboot solidpc

[Piotr Król]

On Wed, Dec 14, 2016 at 10:24:10AM +0100, sebastien basset wrote:
> Hello,

Hi Sebastien,
> i ve began porting coreboot to solidpc. Have you coreboot working for solidPC,
> today ?

I would be glad to help you with that. I have SolidPC 1.2. Unfortunately
had problem with setting up with DediProg SF100 and flashrom. What is
you flashing method ?
> For now, i am stuck in the init of the ram, in call FspMemoryInit:
>  
> coreboot-4.5-4-gca220c0-dirty Wed Nov 30 13:43:19 UTC 2016 romstage starting...
> FSP TempRamInit successful bist: 0x00000000 tsc: 0x0000000000031628 POST: 0x30
> CBFS: 'Master Header Locator' located CBFS at [700100:7fffc0) CBFS: Locating
> 'cpu_microcode_blob.bin' CBFS: Found @ offset 4be80 size 10c00 microcode: sig=
> 0x406c4 pf=0x1 revision=0x403 CONFIG_MMCONF_BASE_ADDRESS: 0xe0000000 Using FSP
> 1.1 FSP_INFO_HEADER: fff6e094 FSP Signature: $BSWFSP$ FSP Header Version: 2 FSP
> Revision: 1.1.2.0 pm1_sts: 8900 pm1_en: 0000 pm1_cnt: 00000000 gpe0_sts:
> 00000000 gpe0_en: 00000000 tco_sts: 00000000 prsts: 00330910 gen_pmcon1:
> 00245209 gen_pmcon2: 00000000 prev_sleep_state 5 CBFS: 'Master Header Locator'
> located CBFS at [700100:7fffc0) CBFS: Locating 'spd.bin' CBFS: Found @ offset
> 1e0c0 size 400 ram_id=10, total_spds: 4 POST: 0x32 POST: 0x33 FMAP: Found
> "FLASH" version 1.1 at 700000. FMAP: base = ff800000 size = 800000 #areas = 3
> No MRC cache found. POST: 0x34 VPD Data: 0xfff9839c UPD Data: 0xfff983b0
> Updating UPD values for MemoryInit POST: 0x36 Calling FspMemoryInit: 0xfffb580f
> 0x00000000: NvsBufferPtr 0xfef03e2c: RtBufferPtr 0xfef03dd4: HobListPtr POST:
> 0x92

Can I assume this is recent master ?

Best Regards,

coreboot solidpc

[sebastien basset]

Hi,

For flashing board solidpc,
1/  plug power supply (without pressing the power button)
2/ connect dediprog on j8 connector( with good cable)
3/ ./flashrom -p dediprog:voltage=1.8V -w solidrun.rom

i'am working on tag 4.5 coreboot.

Sébastien

Le 14 déc. 2016 12:39, "Piotr Król"  a écrit :
> On Wed, Dec 14, 2016 at 10:24:10AM +0100, sebastien basset wrote:
> > Hello,
>
> Hi Sebastien,
> > i ve began porting coreboot to solidpc. Have you coreboot working for
>
> solidPC,
> > today ?
>
> I would be glad to help you with that. I have SolidPC 1.2. Unfortunately
> had problem with setting up with DediProg SF100 and flashrom. What is
> you flashing method ?
> > For now, i am stuck in the init of the ram, in call FspMemoryInit:
> >
> > coreboot-4.5-4-gca220c0-dirty Wed Nov 30 13:43:19 UTC 2016 romstage
>
> starting...
> > FSP TempRamInit successful bist: 0x00000000 tsc: 0x0000000000031628
>
> POST: 0x30
> > CBFS: 'Master Header Locator' located CBFS at [700100:7fffc0) CBFS:
>
> Locating
> > 'cpu_microcode_blob.bin' CBFS: Found @ offset 4be80 size 10c00
>
> microcode: sig=
> > 0x406c4 pf=0x1 revision=0x403 CONFIG_MMCONF_BASE_ADDRESS: 0xe0000000
>
> Using FSP
> > 1.1 FSP_INFO_HEADER: fff6e094 FSP Signature: $BSWFSP$ FSP Header
>
> Version: 2 FSP
> > Revision: 1.1.2.0 pm1_sts: 8900 pm1_en: 0000 pm1_cnt: 00000000 gpe0_sts:
> > 00000000 gpe0_en: 00000000 tco_sts: 00000000 prsts: 00330910 gen_pmcon1:
> > 00245209 gen_pmcon2: 00000000 prev_sleep_state 5 CBFS: 'Master Header
>
> Locator'
> > located CBFS at [700100:7fffc0) CBFS: Locating 'spd.bin' CBFS: Found @
>
> offset
> > 1e0c0 size 400 ram_id=10, total_spds: 4 POST: 0x32 POST: 0x33 FMAP: Found
> > "FLASH" version 1.1 at 700000. FMAP: base = ff800000 size = 800000
>
> #areas = 3
> > No MRC cache found. POST: 0x34 VPD Data: 0xfff9839c UPD Data: 0xfff983b0
> > Updating UPD values for MemoryInit POST: 0x36 Calling FspMemoryInit:
>
> 0xfffb580f
> > 0x00000000: NvsBufferPtr 0xfef03e2c: RtBufferPtr 0xfef03dd4: HobListPtr
>
> POST:
> > 0x92
>
> Can I assume this is recent master ?
> Best Regards,
>
> Piotr Król
> Embedded Systems Consultant
> http://3mdeb.com | @3mdeb_com