compiling error with fsp_baytrail's asl code

Hi all,
        There is something wrong with fsp_baytrail's asl code, as shown below:
          "dsdt.ramstage.asl 24: Store (0, TRP0) 
Error 4064 - Object does not exist ^ (TRP0)

dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, ) 
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, ) 
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, ) 
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) 
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) 
Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)

dsdt.ramstage.asl 1073: Return (^RBUF) 
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, ) 
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) 
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) 
Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)

dsdt.ramstage.asl 1121: Return (^RBUF) 
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1148: Device } 
Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end 
"

Thanks,
Tank

[Mike Hibbett]

When did that error appear Tank? And what version of the iasl compiler are you using?

Mike

Sent with AquaMail for Android
http://www.aqua-mail.com

On 4 June 2014 03:27:35 [e-mail] wrote:

Hi all,
        There is something wrong with fsp_baytrail's asl code, as shown below:
          "dsdt.ramstage.asl 24: Store (0, TRP0)
Error 4064 - Object does not exist ^ (TRP0)

dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, )
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, )
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, )
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)

dsdt.ramstage.asl 1073: Return (^RBUF)
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, )
Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG

dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)

dsdt.ramstage.asl 1121: Return (^RBUF)
Error 4065 - ^ Object not found or not accessible from scope (^RBUF)

dsdt.ramstage.asl 1148: Device }
Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end
"

________________________________
Thanks,
Tank

[Paul Menzel]

Dear Tank,

Am Mittwoch, den 04.06.2014, 09:55 +0800 schrieb [e-mail]:
>     There is something wrong with fsp_baytrail's asl code, as shown below:
>       "dsdt.ramstage.asl 24: Store (0, TRP0)
>
> Error 4064 - Object does not exist ^ (TRP0)
>
> dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
>
> dsdt.ramstage.asl 1073: Return (^RBUF)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
>
> dsdt.ramstage.asl 1121: Return (^RBUF)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1148: Device }
> Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end

Which version of the ASL compiler iasl do you use?

Probably it is the same problem, I had, that it is too old [1].

Please build coreboot’s reference toolchain with `make crossgcc`, which
will take some time. To avoid building the toolchain for ARM, you can do
the following.

$ cd util/crossgcc
        $ make build-i386

Thanks,

Paul

PS: Please just send plain text messages to mailing lists and no HTML.

[1] http://review.coreboot.org/5792/
    Comment from May 26 11:01 PM

[Martin Roth]

Hi Tank,
   Paul noted this in one of his reviews, but it looks like it's due to 
using an old version of IASL.  Could you try updating to a newer version 
and see if that solves the issue?

https://acpica.org/downloads

Martin

On 06/03/2014 07:55 PM, [e-mail] wrote:
> Hi all,
>     There is something wrong with fsp_baytrail's asl code, as shown below:
>   "dsdt.ramstage.asl 24: Store (0, TRP0)
> Error 4064 - Object does not exist ^ (TRP0)
>
> dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
>
> dsdt.ramstage.asl 1073: Return (^RBUF)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, )
> Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
>
> dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
>
> dsdt.ramstage.asl 1121: Return (^RBUF)
> Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
>
> dsdt.ramstage.asl 1148: Device }
> Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end
> "
>
> Thanks,
> Tank

[Patrick Georgi]

Hi Martin, Paul et al,

Am 04.06.2014 18:47, schrieb Martin Roth:
> Paul noted this in one of his reviews, but it looks like it's due to
> using an old version of IASL.

If you know what triggers these issues, maybe we could add a test case
to the xcompile script, so things fail early?

If you provide a test case, I'll gladly do the integration.

Patrick

[WANG FEI]

I'm using IASL 20140214-32, it does report a lot warning, but no errors, it
does not cause compiling failed.

On Wed, Jun 4, 2014 at 7:31 AM, Mike Hibbett  wrote:
> When did that error appear Tank? And what version of the iasl compiler
> are you using?
>
> Mike
>
> Sent with AquaMail for Android
> http://www.aqua-mail.com
>
> On 4 June 2014 03:27:35 [e-mail] wrote:
> > Hi all,
> >         There is something wrong with fsp_baytrail's asl code, as shown
> > below:
> >           "dsdt.ramstage.asl 24: Store (0, TRP0)
> > Error 4064 - Object does not exist ^ (TRP0)
> >
> > dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, )
> > Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
> >
> > dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, )
> > Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
> >
> > dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, )
> > Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
> >
> > dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> > Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
> >
> > dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> > Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
> >
> > dsdt.ramstage.asl 1073: Return (^RBUF)
> > Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
> >
> > dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, )
> > Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG
> >
> > dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> > Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
> >
> > dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
> > Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS)
> >
> > dsdt.ramstage.asl 1121: Return (^RBUF)
> > Error 4065 - ^ Object not found or not accessible from scope (^RBUF)
> >
> > dsdt.ramstage.asl 1148: Device }
> > Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end
> > "
> >
> > Thanks,
> > Tank