ok - i have just tried to be friendly and let you ask information needed
must apologize if tones of my messages are wrong as i'm not native english and it may affect nuances of my writing or how it sounds to you
- the basic issue is that after following your pages, coreboot won't boot
- i have not yet tried to get output w serial console but try to follow previous hint to do 'make crossgcc'
- as i try to do 'make crossgcc' the system appears to go to loop = now it has been trying for an hour with only output on attached make_crossgcc_out / make_crossgcc_err
- there is nothing in syslog
- distribution is CRUX 2.8 ( ftp://ftp.spline.inf.fu-berlin.de/pub/crux/crux-2.8/iso/ ) but only bare minimum of stuff installed ( installed_stuff ) and after coreboot running i get rid of even some of them to begin building my kind of things
- attached linux_config_mc for kernel 3.5.4 - and note that udev is not running
Thanks to all of you
/mc
On 6/8/13, Paul Menzel paulepanter@users.sourceforge.net wrote:
Dear Matti,
Am Samstag, den 08.06.2013, 13:38 +0300 schrieb matti christensen:
ok
trying 'make crossgcc' - it says 'Welcome to the coreboot cross toolchain...etc.' after several tens of minutes and one bash is taking ~100% and hd is in standby ....
Please paste what is written on the console. (Including log files is always recommended.) As all the tools get compiled from source it is to be expected that the CPU is used a lot.
Furthermore, what distribution do you use?
Thanks,
Paul
PS: Please adhere to the netiquette [1] and use interleaved quoting style.
-
matti christensen