[commit] r5831 - in trunk/src: mainboard/hp mainboard/hp/dl165_g6_fam10 superio/serverengines/pilot

[repository service]

Author: oxygene
Date: Fri Sep 24 19:35:32 2010
New Revision: 5831
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5831

Log:
Add support for HP DL165-G6 with Fam10 CPU.

Original patch was
Signed-off-by: Arne Georg Gleditsch

Updates to accomodate changes in coreboot are
Signed-off-by: Patrick Georgi

Acked-by: Marc Jones

Added:
   trunk/src/mainboard/hp/dl165_g6_fam10/
   trunk/src/mainboard/hp/dl165_g6_fam10/Kconfig
   trunk/src/mainboard/hp/dl165_g6_fam10/bootblock.c
   trunk/src/mainboard/hp/dl165_g6_fam10/chip.h
   trunk/src/mainboard/hp/dl165_g6_fam10/cmos.layout
   trunk/src/mainboard/hp/dl165_g6_fam10/devicetree.cb
   trunk/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c
   trunk/src/mainboard/hp/dl165_g6_fam10/irq_tables.c
   trunk/src/mainboard/hp/dl165_g6_fam10/mainboard.c
   trunk/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h
   trunk/src/mainboard/hp/dl165_g6_fam10/mptable.c
   trunk/src/mainboard/hp/dl165_g6_fam10/romstage.c
   trunk/src/mainboard/hp/dl165_g6_fam10/spd_addr.h
Modified:
   trunk/src/mainboard/hp/Kconfig
   trunk/src/superio/serverengines/pilot/pilot_early_init.c

Modified: trunk/src/mainboard/hp/Kconfig
==============================================================================
--- trunk/src/mainboard/hp/Kconfig	Thu Sep 23 20:48:27 2010	(r5830)
+++ trunk/src/mainboard/hp/Kconfig	Fri Sep 24 19:35:32 2010	(r5831)
@@ -7,6 +7,8 @@
    bool "ProLiant DL145 G1"
 config BOARD_HP_DL145_G3
    bool "ProLiant DL145 G3"
+config BOARD_HP_DL165_G6_FAM10
+	bool "ProLiant DL165 G6 Fam10"
 config BOARD_HP_E_VECTRA_P2706T
    bool "e-Vectra P2706T"

@@ -14,6 +16,7 @@

source "src/mainboard/hp/dl145_g1/Kconfig"
 source "src/mainboard/hp/dl145_g3/Kconfig"
+source "src/mainboard/hp/dl165_g6_fam10/Kconfig"
 source "src/mainboard/hp/e_vectra_p2706t/Kconfig"

config MAINBOARD_VENDOR

Added: trunk/src/mainboard/hp/dl165_g6_fam10/Kconfig
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/Kconfig	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,104 @@
+if BOARD_HP_DL165_G6_FAM10
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+        def_bool y
+	select ARCH_X86
+	select CPU_AMD_SOCKET_F_1207
+	select NORTHBRIDGE_AMD_AMDFAM10
+	select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX
+	select SOUTHBRIDGE_BROADCOM_BCM21000
+	select SOUTHBRIDGE_BROADCOM_BCM5785
+	select SUPERIO_NSC_PC87417
+	select HAVE_OPTION_TABLE
+	select HAVE_BUS_CONFIG
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select CACHE_AS_RAM
+	select HAVE_HARD_RESET
+	select LIFT_BSP_APIC_ID
+	select BOARD_ROMSIZE_KB_1024
+	select ENABLE_APIC_EXT_ID
+	select AMDMCT
+	select TINY_BOOTBLOCK
+
+config MAINBOARD_DIR
+	string
+	default hp/dl165_g6_fam10
+
+config DCACHE_RAM_BASE
+	hex
+	default 0xc4000
+
+config DCACHE_RAM_SIZE
+	hex
+	default 0x0c000
+
+config DCACHE_RAM_GLOBAL_VAR_SIZE
+	hex
+	default 0x04000
+
+config APIC_ID_OFFSET
+	hex
+	default 0
+
+config SB_HT_CHAIN_ON_BUS0
+	int
+	default 2
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "ProLiant DL165 G6 (Fam10)"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x100000
+
+config MAX_CPUS
+	int
+	default 12
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 2
+
+config HT_CHAIN_END_UNITID_BASE
+	hex
+	default 0x1
+
+config HT_CHAIN_UNITID_BASE
+	hex
+	default 0x6
+
+config SB_HT_CHAIN_ON_BUS0
+	int
+	default 2
+
+config IRQ_SLOT_COUNT
+	int
+	default 15
+
+config AMD_UCODE_PATCH_FILE
+	string
+	default "mc_patch_01000095.h"
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config BOOTBLOCK_SOUTHBRIDGE_INIT
+	string
+	default "mainboard/hp/dl165_g6_fam10/bootblock.c"
+
+config MMCONF_SUPPORT_DEFAULT
+	bool
+	default y
+
+endif # BOARD_HP_DL165_G6_FAM10

Added: trunk/src/mainboard/hp/dl165_g6_fam10/bootblock.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/bootblock.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,48 @@
+#include <device/pnp_def.h>
+
+#define SCH4307_CONFIG_PORT     0x162e
+static inline void shc4307_enter_ext_func_mode(device_t dev)
+{
+	unsigned port = dev >> 8;
+	outb(0x55, port);
+}
+
+static inline void shc4307_exit_ext_func_mode(device_t dev)
+{
+	unsigned port = dev >> 8;
+	outb(0xaa, port);
+}
+
+#define CMOS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x6)
+#define KBD_DEV  PNP_DEV(SCH4307_CONFIG_PORT, 0x7)
+#define DBG_DEV  PNP_DEV(SCH4307_CONFIG_PORT, 0x3)
+#define REGS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0xa)
+
+void shc4307_init(void)
+{
+	shc4307_enter_ext_func_mode(CMOS_DEV);
+	pnp_set_logical_device(CMOS_DEV); /* CMOS/RTC */
+	pnp_set_iobase(CMOS_DEV, PNP_IDX_IO0, 0x70);
+	pnp_set_iobase(CMOS_DEV, PNP_IDX_IO1, 0x72);
+	pnp_set_irq(CMOS_DEV, PNP_IDX_IRQ0, 8);
+	/* pnp_set_enable(CMOS_DEV, 3); */
+	pnp_write_config(CMOS_DEV, 0x30, 3);
+
+	pnp_set_logical_device(KBD_DEV); /* Keyboard */
+	pnp_set_irq(KBD_DEV, PNP_IDX_IRQ0, 1);
+	pnp_set_enable(KBD_DEV, 1);
+
+	pnp_set_logical_device(DBG_DEV); /* Debug */
+	pnp_set_iobase(DBG_DEV, PNP_IDX_IO0, 0x80);
+	pnp_set_enable(DBG_DEV, 1);
+
+	pnp_set_logical_device(REGS_DEV);
+	pnp_set_iobase(REGS_DEV, PNP_IDX_IO0, 0x600);
+	pnp_set_enable(REGS_DEV, 1);
+
+	shc4307_exit_ext_func_mode(CMOS_DEV);
+}
+
+static void bootblock_southbridge_init(void) {
+	shc4307_init();
+}

Added: trunk/src/mainboard/hp/dl165_g6_fam10/chip.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/chip.h	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 University of Mannheim
+ * Written by Philipp Degler  for University of Mannheim.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {
+};
+

Added: trunk/src/mainboard/hp/dl165_g6_fam10/cmos.layout
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/cmos.layout	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399         1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432         8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+

Added: trunk/src/mainboard/hp/dl165_g6_fam10/devicetree.cb
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/devicetree.cb	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,90 @@
+chip northbridge/amd/amdfam10/root_complex
+	device lapic_cluster 0 on
+		chip cpu/amd/socket_F_1207
+			device lapic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		chip northbridge/amd/amdfam10  # northbridge
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.0 on  # devices on link 2
+				chip southbridge/broadcom/bcm21000 # HT2100
+					device pci 0.0 on
+					end   # bridge to slot PCI-E 4x ??
+					device pci 1.0 on
+					end
+					device pci 2.0 on
+					end  # unused
+					device pci 3.0 on  	# bridge to slot PCI-E 16x ??
+					end
+					device pci 4.0 on
+					end  # unused
+					device pci 5.0 on
+						device pci 4.0 on end # BCM5715 NIC
+						device pci 4.1 on end # BCM5715 NIC
+					end
+				end
+				chip southbridge/broadcom/bcm5785 # HT1000
+					device pci 0.0 on  # HT PXB  0x0036
+						device pci d.0 on end # PCI/PCI-X bridge 0x0104
+						device pci e.0 on end # SATA 0x024a
+					end
+					device pci 1.0 on end # Legacy  pci main  0x0205
+					device pci 1.1 on end # IDE	0x0214
+					device pci 1.2 on     # LPC	0x0234
+						chip superio/nsc/pc87417
+							device  pnp 4e.0 off  # Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 4e.1 off  # Parallel Port
+									io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 4e.2 off # Com 2
+									io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 4e.3 off  # Com 1
+									io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 4e.4 off end # SWC
+							device pnp 4e.5 off end # Mouse
+							device pnp 4e.6 off  # Keyboard
+									io 0x60 = 0x60
+									io 0x62 = 0x64
+								irq 0x70 = 1
+							end
+							device pnp 4e.7 off end # GPIO
+							device pnp 4e.f off end # XBUS
+							device pnp 4e.10 on #RTC
+								io 0x60 = 0x70
+								io 0x62 = 0x72
+							end
+						end # end superio
+					end # end pci 1.2
+					device pci 1.3 off end # WDTimer    0x0238
+					device pci 1.4 on end # XIOAPIC0   0x0235
+					device pci 1.5 on end # XIOAPIC1
+					device pci 1.6 on end # XIOAPIC2
+					device pci 2.0 on end # USB	0x0223
+					device pci 2.1 on end # USB
+					device pci 2.2 on end # USB
+					device pci 3.0 on end # VGA
+				end
+			end
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+      end # amdfam10
+
+   end #pci_domain
+end
+
+

Added: trunk/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu  for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/multicore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include <stdlib.h>
+#include "mb_sysconf.h"
+
+// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
+struct mb_sysconf_t mb_sysconf;
+
+/* Here you only need to set value in pci1234 for HT-IO that could be
+   installed or not You may need to preset pci1234 for HTIO board, please
+   refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */
+static u32 pci1234x[] = {
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc,
+};
+
+
+/* HT Chain device num, actually it is unit id base of every ht device
+   in chain, assume every chain only have 4 ht device at most */
+
+static unsigned hcdnx[] = {
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020,
+};
+
+extern void get_pci1234(void);
+
+static unsigned get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+
+	unsigned apicid_base;
+
+	device_t dev;
+	int i;
+	struct mb_sysconf_t *m;
+
+	if(get_bus_conf_done==1) return; //do it only once
+
+	get_bus_conf_done = 1;
+
+	sysconf.mb = &mb_sysconf;
+
+	m = sysconf.mb;
+	memset(m, 0, sizeof(struct mb_sysconf_t));
+
+	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+
+	for(i=0;i<sysconf.hc_possible_num; i++) {
+		sysconf.pci1234[i] = pci1234x[i];
+		sysconf.hcdn[i] = hcdnx[i];
+	}
+
+	get_pci1234();
+
+	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+	m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780
+
+	m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 12) & 0xff;
+	m->bus_bcm5780[0] = m->bus_bcm5785_0;
+
+		/* bcm5785 */
+	printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0);
+	dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0));
+	if (dev) {
+		printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev));
+		m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+		printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1);
+		dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0));
+		printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev));
+		if(dev) {
+			m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE
+			m->bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			m->bus_isa++;
+			printk(BIOS_DEBUG, "bus_isa 1=%d\n",m->bus_isa);
+#endif
+		}
+	}
+	else {
+		printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn);
+	}
+
+		/* bcm5780 */
+	for(i = 1; i < 6; i++) {
+		dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0));
+		if(dev) {
+			m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE
+			m->bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			m->bus_isa++;
+			printk(BIOS_DEBUG, "bus_isa 2=%d\n",m->bus_isa);
+#endif
+
+		}
+		else {
+			printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1);
+		}
+	}
+
+/*I/O APICs:	APIC ID	Version	State		Address*/
+	apicid_base = 0x10;
+	for(i=0;i<3;i++)
+		m->apicid_bcm5785[i] = apicid_base+i;
+}

Added: trunk/src/mainboard/hp/dl165_g6_fam10/irq_tables.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/irq_tables.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,51 @@
+/* This file was generated by getpir.c, do not modify!
+ * (but if you do, please run checkpir on it to verify)
+ *
+ * Contains the IRQ Routing Table dumped directly from your
+ * memory, which BIOS sets up.
+ *
+ * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx
+ */
+
+#ifdef GETPIR
+#include "pirq_routing.h"
+#else
+#include <arch/pirq_routing.h>
+#endif
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,		/* u32 signature */
+	PIRQ_VERSION,		/* u16 version */
+	32 + 16 * 11,		/* Max. number of devices on the bus */
+	0x00,			/* Interrupt router bus */
+	(0x02 << 3) | 0x0,	/* Interrupt router dev */
+	0,			/* IRQs devoted exclusively to PCI usage */
+	0x1166,			/* Vendor */
+	0x36,			/* Device */
+	0,			/* Miniport */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0xe9,			/* Checksum (has to be set to some value that
+				 * would give 0 after the sum of all bytes
+				 * for this structure (including checksum).
+				 */
+	{
+		/* bus,        dev | fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+		{0x01, (0x0e << 3) | 0x0, {{0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}}, 0x0, 0x0}, /* 1166:024a */
+		{0x00, (0x03 << 3) | 0x0, {{0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}}, 0x0, 0x0}, /* 1166:0223 */
+		{0x00, (0x06 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x0, 0x0}, /* 1166:0140 */
+		{0x00, (0x07 << 3) | 0x0, {{0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */
+		{0x00, (0x08 << 3) | 0x0, {{0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */
+		{0x00, (0x09 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */
+		{0x00, (0x0a << 3) | 0x0, {{0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */
+		{0x02, (0x02 << 3) | 0x0, {{0x28, 0xdac0}, {0x27, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 14e4:1648 */
+		{0x06, (0x00 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x2, 0x0},
+		{0x03, (0x00 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x2, 0x0},
+		{0x07, (0x00 << 3) | 0x0, {{0x2a, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 102b:0522 */
+	}
+};
+
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}

Added: trunk/src/mainboard/hp/dl165_g6_fam10/mainboard.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/mainboard.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 University of Mannheim
+ * Written by Philipp Degler  for Uni of Mannheim.
+ *
+ * Copyright (C) 2009 University of Heidelberg
+ * Written by Mondrian Nuessle  for University of Heidelberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME("HP DL165 G6 Mainboard (Family 10)")
+};

Added: trunk/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu  for AMD.
+ *
+ * Copyright (C) 2007 University of Mannheim
+ * Written by Philipp Degler  for Uni of Mannheim
+ *
+ * Copyright (C) 2009 University of Heidelberg
+ * Written by Mondrian Nuessle  for Uni of Heidelberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+	unsigned char bus_isa;
+	unsigned char bus_bcm5780[7];
+	unsigned char bus_bcm5785_0;
+	unsigned char bus_bcm5785_1;
+	unsigned char bus_bcm5785_1_1;
+	unsigned apicid_bcm5785[3];
+
+	unsigned sbdn2;
+	unsigned bus_type[256]; 
+};
+
+#endif
+

Added: trunk/src/mainboard/hp/dl165_g6_fam10/mptable.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/mptable.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,192 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2001 Eric W.Biederman
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu  for AMD.
+ *
+ * Copyright (C) 2007 University of Mannheim
+ * Written by Philipp Degler  for Uni of Mannheim
+ *
+ * Copyright (C) 2009 University of Heidelberg
+ * Written by Mondrian Nuessle  for Uni of Heidelberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/multicore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+static void *smp_write_config_table(void *v)
+{
+	static const char sig[4] = "PCMP";
+	static const char oem[8] = "COREBOOT";
+	static const char productid[12] = "HP DL165 G6 ";
+	struct mp_config_table *mc;
+	int isa_bus;
+
+	struct mb_sysconf_t *m;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	memset(mc, 0, sizeof(*mc));
+
+	memcpy(mc->mpc_signature, sig, sizeof(sig));
+	mc->mpc_length = sizeof(*mc); /* initially just the header */
+	mc->mpc_spec = 0x04;
+	mc->mpc_checksum = 0; /* not yet computed */
+	memcpy(mc->mpc_oem, oem, sizeof(oem));
+	memcpy(mc->mpc_productid, productid, sizeof(productid));
+	mc->mpc_oemptr = 0;
+	mc->mpc_oemsize = 0;
+	mc->mpc_entry_count = 0; /* No entries yet... */
+	mc->mpc_lapic = LAPIC_ADDR;
+	mc->mpe_length = 0;
+	mc->mpe_checksum = 0;
+	mc->reserved = 0;
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+	m = sysconf.mb;
+
+	mptable_write_buses(mc, NULL, &isa_bus);
+	printk(BIOS_DEBUG, "writing %d as ISA to mptable (%d for real)...\n", isa_bus, m->bus_isa);
+
+	/*I/O APICs:   APIC ID Version State           Address*/
+	{
+		device_t dev = 0;
+		int i;
+		struct resource *res;
+		for(i=0; i<3; i++) {
+			dev = dev_find_device(0x1166, 0x0235, dev);
+			if (dev) {
+				res = find_resource(dev, PCI_BASE_ADDRESS_0);
+				if (res) {
+					printk(BIOS_DEBUG, "APIC %d base address: %x\n",m->apicid_bcm5785[i], (int)res->base);
+					smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base);
+				}
+			}
+		}
+
+	}
+
+	/* IRQ routing as factory BIOS */
+	outb(0x00, 0xc00); outb(0x09, 0xc01);
+	outb(0x01, 0xc00); outb(0x0a, 0xc01);
+	outb(0x02, 0xc00); outb(0x0e, 0xc01);
+	outb(0x03, 0xc00); outb(0x07, 0xc01);
+	outb(0x07, 0xc00); outb(0x05, 0xc01);
+
+	// 8259 registers...
+	outb(0xa0, 0x4d0);
+	outb(0x0e, 0x4d1);
+
+	{
+		device_t dev;
+		dev = dev_find_device(0x1166, 0x0205, 0);
+		if(dev) {
+			uint32_t dword;
+			dword = pci_read_config32(dev, 0x64);
+			dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7
+			pci_write_config32(dev, 0x64, dword);
+		}
+		// set GEVENT pins to NO OP
+		/* outb(0x33, 0xcd6); outb(0x00, 0xcd7);
+		outb(0x34, 0xcd6); outb(0x00, 0xcd7);
+		outb(0x35, 0xcd6); outb(0x00, 0xcd7); */
+	}
+
+	// hide XIOAPIC PCI configuration space
+	{
+		device_t dev;
+		dev = dev_find_device(0x1166, 0x205, 0);
+		if (dev) {
+			uint32_t dword;
+			dword = pci_read_config32(dev, 0x64);
+			dword |= (1<<26);
+			pci_write_config32(dev, 0x64, dword);
+		}
+	}
+
+	mptable_add_isa_interrupts(mc, isa_bus, m->apicid_bcm5785[0], 0);
+
+	/* I/O Ints:		Type	Polarity/Trigger			Bus ID		IRQ	APIC ID		PIN#  */
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0xe<<2)|0,	m->apicid_bcm5785[0], 0x5);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x3<<2)|0,	m->apicid_bcm5785[0], 0xa);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0,	m->apicid_bcm5785[2], 0x4);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0,	m->apicid_bcm5785[2], 0x3);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0,	m->apicid_bcm5785[2], 0x2);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0,	m->apicid_bcm5785[2], 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0,	m->apicid_bcm5785[2], 0x0);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|0,	m->apicid_bcm5785[2], 0x8);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|1,	m->apicid_bcm5785[2], 0x7);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0x0<<2)|0,	m->apicid_bcm5785[2], 0xa);
+
+	/* enable int */
+	/* why here? must get the BAR and PCI command bit 1 set before enable it ....*/
+	{
+		device_t dev;
+		dev = dev_find_device(0x1166, 0x0205, 0);
+		if(dev) {
+			uint32_t dword;
+			dword = pci_read_config32(dev, 0x6c);
+			dword |= (1<<4); // enable interrupts
+			printk(BIOS_DEBUG, "6ch: %x\n",dword);
+			pci_write_config32(dev, 0x6c, dword);
+		}
+	}
+
+	/* Local Ints:		Type	Polarity/Trigger				Bus ID		IRQ	APIC ID		PIN#  */
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus,	0x0,	MP_APIC_ALL,	0x0);
+	smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus,		0x0,	MP_APIC_ALL,	0x1);
+
+	//extended table entries
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001);
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80);
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100);
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0);
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f);
+	smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006);
+	smp_write_bus_hierarchy(mc, 8, 0x01, 0);
+	smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0);
+	smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1);
+
+
+	/* Compute the checksums */
+	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+	printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
+		mc, smp_next_mpe_entry(mc));
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}

Added: trunk/src/mainboard/hp/dl165_g6_fam10/romstage.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/romstage.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,242 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2006 Tyan
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu  for Tyan and AMD.
+ *
+ * Copyright (C) 2007 University of Mannheim
+ * Written by Philipp Degler  for University of Mannheim
+ * Copyright (C) 2009 University of Heidelberg
+ * Written by Mondrian Nuessle  for University of Heidelberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define RAMINIT_SYSINFO 1
+
+#define FAM10_SCAN_PCI_BUS 0
+#define FAM10_ALLOCATE_IO_RANGE 1
+
+#define QRANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+#define SET_FIDVID 1
+#define SET_FIDVID_CORE_RANGE 0
+
+#define DBGP_DEFAULT 7
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include <console/console.h>
+#include "lib/ramtest.c"
+#include <cpu/amd/model_10xxx_rev.h>
+#include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+
+#include "cpu/amd/model_10xxx/apic_timer.c"
+#include "lib/delay.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+
+#include "superio/serverengines/pilot/pilot_early_serial.c"
+#include "superio/serverengines/pilot/pilot_early_init.c"
+#include "superio/nsc/pc87417/pc87417_early_serial.c"
+
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdfam10/debug.c"
+
+#include "cpu/x86/mtrr/earlymtrr.c"
+
+//#include "northbridge/amd/amdfam10/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1)
+#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC)
+
+#include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+	u8 val;
+	outb(0x3d, 0x0cd6);
+	outb(0x87, 0x0cd7);
+
+	outb(0x44, 0xcd6);
+	val = inb(0xcd7);
+	outb((val & ~3) | ctrl->spd_switch_addr, 0xcd7);
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdfam10/amdfam10.h"
+
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+
+#include "cpu/amd/quadcore/quadcore.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/microcode/microcode.c"
+#include "cpu/amd/model_10xxx/update_microcode.c"
+#include "cpu/amd/model_10xxx/init_cpus.c"
+
+#include "northbridge/amd/amdfam10/early_ht.c"
+
+#include "spd_addr.h"
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	struct sys_info *sysinfo =  (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+
+	u32 bsp_apicid = 0;
+	u32 val;
+	msr_t msr;
+ 
+	if (!cpu_init_detectedx && boot_cpu()) {
+	    /* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		/* mov bsp to bus 0xff when > 8 nodes */
+		set_bsp_node_CHtExtNodeCfgEn();
+		enumerate_ht_chain();
+
+		/* Setup the rom access for 4M */
+		bcm5785_enable_rom();
+		bcm5785_enable_lpc();
+		//enable RTC
+		pc87417_enable_dev(RTC_DEV);
+	}
+
+	post_code(0x30);
+
+	if (bist == 0) {
+		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+	}
+
+	pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
+	uart_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+	console_init();
+	pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV
+
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+	printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
+	printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
+
+	/* Setup sysinfo defaults */
+	set_sysinfo_in_ram(0);
+
+	update_microcode(val);
+	post_code(0x33);
+
+	cpuSetAMDMSR();
+	post_code(0x34);
+
+	amd_ht_init(sysinfo);
+	post_code(0x35);
+
+	/* Setup nodes PCI space and start core 0 AP init. */
+	finalize_node_setup(sysinfo);
+
+	post_code(0x36);
+
+	/* wait for all the APs core0 started by finalize_node_setup. */
+	/* FIXME: A bunch of cores are going to start output to serial at once.
+	 * It would be nice to fixup prink spinlocks for ROM XIP mode.
+	 * I think it could be done by putting the spinlock flag in the cache
+	 * of the BSP located right after sysinfo.
+	 */
+
+	wait_all_core0_started();
+
+#if CONFIG_LOGICAL_CPUS==1
+	/* Core0 on each node is configured. Now setup any additional cores. */
+	printk(BIOS_DEBUG, "start_other_cores()\n");
+	start_other_cores();
+	post_code(0x37);
+	wait_all_other_cores_started(bsp_apicid);
+#endif
+
+#if SET_FIDVID == 1
+	msr = rdmsr(0xc0010071);
+	printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+
+	/* FIXME: The sb fid change may survive the warm reset and only
+	 * need to be done once.*/
+
+	enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+	post_code(0x39);
+
+	if (!warm_reset_detect(0)) {                    // BSP is node 0
+		init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
+	} else {
+		init_fidvid_stage2(bsp_apicid, 0);      // BSP is node 0
+	}
+
+	post_code(0x3A);
+
+	/* show final fid and vid */
+	msr=rdmsr(0xc0010071);
+	printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+#endif
+
+	init_timer();
+
+	/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+	if (!warm_reset_detect(0)) {
+		print_info("...WARM RESET...\n\n\n");
+		soft_reset();
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	/* It's the time to set ctrl in sysinfo now; */
+	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+	enable_smbus();
+
+	//do we need apci timer, tsc...., only debug need it for better output
+	/* all ap stopped? */
+//	init_timer(); // Need to use TMICT to synconize FID/VID
+
+	printk(BIOS_DEBUG, "raminit_amdmct()\n");
+	raminit_amdmct(sysinfo);
+	post_code(0x41);
+
+	bcm5785_early_setup();
+
+	post_cache_as_ram();
+}

Added: trunk/src/mainboard/hp/dl165_g6_fam10/spd_addr.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/src/mainboard/hp/dl165_g6_fam10/spd_addr.h	Fri Sep 24 19:35:32 2010	(r5831)
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * This file defines the SPD addresses for the mainboard. Must be included in
+ * romstage.c
+ */
+
+#define RC00 0
+#define RC01 1
+#define RC02 2
+#define RC03 3
+#define RC04 4
+#define RC05 5
+#define RC06 6
+#define RC07 7
+#define RC08 8
+#define RC09 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+#define RC16 16
+#define RC17 17
+#define RC18 18
+#define RC19 19
+#define RC20 20
+#define RC21 21
+#define RC22 22
+#define RC23 23
+#define RC24 24
+#define RC25 25
+#define RC26 26
+#define RC27 27
+#define RC28 28
+#define RC29 29
+#define RC30 30
+#define RC31 31
+
+#define RC32 32
+#define RC33 33
+#define RC34 34
+#define RC35 35
+#define RC36 36
+#define RC37 37
+#define RC38 38
+#define RC39 39
+#define RC40 40
+#define RC41 41
+#define RC42 42
+#define RC43 43
+#define RC44 44
+#define RC45 45
+#define RC46 46
+#define RC47 47
+#define RC48 48
+#define RC49 49
+#define RC50 50
+#define RC51 51
+#define RC52 52
+#define RC53 53
+#define RC54 54
+#define RC55 55
+#define RC56 56
+#define RC57 57
+#define RC58 58
+#define RC59 59
+#define RC60 60
+#define RC61 61
+#define RC62 62
+#define RC63 63
+
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+#define DIMM4 0x54
+#define DIMM5 0x55
+#define DIMM6 0x56
+#define DIMM7 0x57
+
+
+static const u8 spd_addr[] = {
+	// switch addr, 1A addr, 2A addr, 3A addr, 4A addr, 1B addr, 2B addr, 3B addr 4B addr
+	//first node
+	RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+	//second node
+	RC01, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+};
+

Modified: trunk/src/superio/serverengines/pilot/pilot_early_init.c
==============================================================================
--- trunk/src/superio/serverengines/pilot/pilot_early_init.c	Thu Sep 23 20:48:27 2010	(r5830)
+++ trunk/src/superio/serverengines/pilot/pilot_early_init.c	Fri Sep 24 19:35:32 2010	(r5831)
@@ -37,6 +37,16 @@
    pilot_disable_serial(PNP_DEV(port, 0x1));
    print_debug("disable serial 1\n");

+	pnp_enter_ext_func_mode(dev);
+	pnp_set_logical_device(PNP_DEV(port, 0x3));
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, 0x60, 0x0b00);
+	pnp_set_iobase(dev, 0x62, 0x0b80);
+	pnp_set_iobase(dev, 0x64, 0x0b84);
+	pnp_set_iobase(dev, 0x66, 0x0b86);
+	pnp_set_enable(dev, 1);
+	pnp_exit_ext_func_mode(dev);
+
 /*
    pnp_enter_ext_func_mode(dev);
    pnp_set_logical_device(PNP_DEV(port, 0x3));
@@ -58,14 +68,27 @@
    pnp_enter_ext_func_mode(dev);
    pnp_set_enable(PNP_DEV(port, 0x5), 0);
    pnp_exit_ext_func_mode(dev);
-/*
+
    pnp_enter_ext_func_mode(dev);
    pnp_set_logical_device(PNP_DEV(port, 0x6));
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x60);
+	pnp_set_iobase(dev, PNP_IDX_IO1, 0x64);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 1);
+	pnp_set_drq(dev, 0x71, 3);
+	pnp_set_enable(dev, 0);
    pnp_exit_ext_func_mode(dev);
+
    pnp_enter_ext_func_mode(dev);
-	pnp_set_enable( PNP_DEV(port, 0x6), 0);
+	pnp_set_logical_device(PNP_DEV(port, 0xe));
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x70);
+	pnp_set_iobase(dev, PNP_IDX_IO1, 0x72);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 8);
+	pnp_set_drq(dev, 0x71, 3);
+	pnp_set_enable(dev, 0);
    pnp_exit_ext_func_mode(dev);
-*/
+
    pnp_enter_ext_func_mode(dev);
    pnp_set_logical_device(PNP_DEV(port, 0x7));
    pnp_exit_ext_func_mode(dev);