Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "uwe" checked in revision 5833 to the coreboot repository. This caused the following changes:
Change Log: Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future.
Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Stefan Reinauer stepan@coresystems.de
Build Log: Compilation of hp:dl165_g6_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=5833&device=dl165_g6_fa...
If something broke during this checkin please be a pain in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, coreboot automatic build system