Hi Hilbert, Have you had any luck? I have a board with a similar problem. Commenting out the entry for device 1f.3 in devicetree.cb seemed to help (I copied src/mainboard/intel/camelbackmountain_fsp for my project).
On Wed, Dec 27, 2017 at 2:17 AM, Hilbert Tu(杜睿哲_Pegatron) < Hilbert_Tu@pegatroncorp.com> wrote:
I am porting coreboot on Intel BDX-DE platform and it gets stuck when init PCI 00:1f.3. This device should be SMBus, serial management bus. But I don’t know why this happened. Does anyone can give me some hint? Attached is my boot up log. Thanks in advance.
-Hilbert This e-mail and its attachment may contain information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited. 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子 郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。
-- coreboot mailing list: firstname.lastname@example.org https://mail.coreboot.org/mailman/listinfo/coreboot