Re: [coreboot] coreboot support for Minnowboard Turbot E3845

[Michael Graichen]

Hey Zoran,

thanks for your help!

Is there some place to look up the connection between CPUID and microcode?

I tested M0130679905.inc but still with the same effect.

So I flashed the original Image and booted Linux.
/proc/cpuinfo tells me that the original image is using microcode: 0x906

but where can I find it?

Best Regards

Michael

Am 14.12.2017 um 20:25 schrieb Zoran Stojsavljevic:
> for a E3845 Family: 0x06 Model:0x37 Stepping: 0x09...

This is CPUID 0x30679, which uses MCU M0130679901.h (ONLY this one).

You can also try the following MCU: M0130679905.inc (attached). You need to convert it to .h

Zoran
_______

On Thu, Dec 14, 2017 at 6:15 PM, Michael Graichen <[e-mail]> wrote:
Hey Piotr,

I'm glad to read that somebody else is working on the Atoms as well.
I'm not sure about my ucode config. At the moment I'm using 5 include files:

M0130673322.h
M0130678806.h
M0130678817.h
M0130679901.h and
M0230672228.h

for a E3845 Family: 0x06 Model:0x37 Stepping: 0x09.
I copied the includes from various FSP's and the FSP_GOLD packages.

I tried other combinations before but then i had no output on the serial
line so I ended up using these five.

What is your Familly/Model/Stepping and what are you using for ucode?

Best Regards

Michael

Am 14.12.2017 um 00:04 schrieb Piotr Król:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA512
>
> On 12/13/2017 07:29 PM, Michael Graichen wrote:
> > Hey,
>
> Hi Michael,
> > I've bought a Minnowboard Turbot (quad core / E3845) to start
> > developing on the Atom's.
> >
> > I was hopping that it has support like the Minnowboard Max but it
> > get stuck right after FspInitApi(&FspInitParams); in
> > coreboot/src/drivers/intel/fsp1_0/fsp_util.c. The last output i can
> > see is "POST: 0x92" which comes from
> > post_code(POST_FSP_MEMORY_INIT); right before
> > FspInitApi(&FspInitParams);
>
> I'm not expert in MinnowBoard Turbot, but I play recently with E3826
> and saw similar behavior when incorrect microcode was used (or no
> microcode). What are your ucode configuration ?
>
> Best Regards,
>
> Piotr Król
> Embedded Systems Consultant
> https://3mdeb.com | @3mdeb_com
> -----BEGIN PGP SIGNATURE-----
>
> iQIzBAEBCgAdFiEE4DCbLYWmfoRjKeNLsu5x6WeqnkwFAloxsggACgkQsu5x6Weq
> nkzfPg/+PM8fk80pbmexWQw5IO4LbDOX4vw5LYkrkeTxh/3T6hAAjBt7KJ6OA4Ft
> vW8d/Ll37/r7zutrOXemXZRtxulHy4FL/7aGcDdu8JPxnO4ysLGM0fOZxkZtuyNA
> WYI7nS5mYcVdA69driI3rW0cSuGVAy7LiOBIzzV5Z8iWjQXop56cMJiP6In7zayr
> 7B5XZ6Ix934AzYihK6hZ5Rz5jZyouKb0NJRQLnRB+MljuL4sLa18bnX5NUBqgDxu
> cbw54UYgkgd6CsrbGw3XIGB63k7jYYOUayZwBaqg4QYIxPs798pX5MTe7VMJneFc
> kmg+t8HHZxQkaF9YjoVwyS5y4/24FgwQ5bROo/ztNqZMz2q0nK6jd7vQjobFKTVb
> Hc7w0jQIY37z3ZConHj9hHeVQ4AILFgpUl+NJj04hekcs4aAwJhbMun7YEAmchkp
> cCsv+WvXmOUZwTZR+CoH1xTYSMIX6JkMDZlmlhR/UGlAdpIkxMKQ6MezJXgyihvn
> rBBAMDKGvNxeZ00Cf35d+tI9OwDWw/YxYDMV3nx5MzeIkvho4Umg6ey824QlqxBF
> D+3wYuiB4ZO/uEViYkW62jFOMHxeTZ9lBNdigPsnuclDiXhvAoA1uImsaLHjNHpQ
> xndtfh+FPE3kB6c4koorgXxa3OZacd+4pGDmyjOy7Vl+TZk5hkA=
> =r1Ls
> -----END PGP SIGNATURE-----