Author: uwe Date: 2006-12-14 15:26:46 +0100 (Thu, 14 Dec 2006) New Revision: 2525
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/Config.lb trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/chip.h trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x.h trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/superio.c Log: Add support for the SMSC FDC37M60x Super I/O (tested on FDC37M602).
Serial output on serial port 1 is tested and works, the rest probably not yet.
Closes #59.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Stefan Reinauer stepan@coresystems.de
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/Config.lb 2006-12-14 14:26:46 UTC (rev 2525) @@ -0,0 +1,23 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config chip.h +object superio.o +
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/chip.h 2006-12-14 14:26:46 UTC (rev 2525) @@ -0,0 +1,36 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SUPERIO_SMSC_FDC37M60X +#define _SUPERIO_SMSC_FDC37M60X + +#include <device/device.h> +#include <pc80/keyboard.h> +#include <uart8250.h> + +extern struct chip_operations superio_smsc_fdc37m60x_ops; + +struct superio_smsc_fdc37m60x_config { + struct uart8250 com1, com2; + struct pc_keyboard keyboard; +}; + +#endif /* _SUPERIO_SMSC_FDC37M60X */ +
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x.h =================================================================== --- trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x.h (rev 0) +++ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x.h 2006-12-14 14:26:46 UTC (rev 2525) @@ -0,0 +1,39 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Datasheet: + * - Name: FDC37M60x Enhanced Super I/O Controller with Infrared Support. + * - URL: http://www.smsc.com/main/discfdc.html + * - PDF: http://www.smsc.com/main/tools/discontinued/37m602.pdf + * - Revision: 6/6/97 + */ + +/* Status: Serial port 1 is tested and works (tested on FDC37M602). */ + +/* Note: Logical devices 1, 2, 6, and 9 are reserved. */ + +#define FDC37M60X_FDC 0x00 /* Floppy */ +#define FDC37M60X_PP 0x03 /* Parallel port */ +#define FDC37M60X_SP1 0x04 /* Com1 */ +#define FDC37M60X_SP2 0x05 /* Com2 */ +#define FDC37M60X_KBCK 0x07 /* Keyboard */ +#define FDC37M60X_AUX 0x08 /* Auxiliary I/O */ +
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c =================================================================== --- trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c (rev 0) +++ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c 2006-12-14 14:26:46 UTC (rev 2525) @@ -0,0 +1,78 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/romcc_io.h> +#include "fdc37m60x.h" + +/* The base address is 0x3f0 or 0x370, depending on the SYSOPT pin. */ +#define SIO_BASE 0x3f0 +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global configuration registers. */ +#define FDC37M60X_CONFIG_REG_CC 0x02 /* Configure Control. */ +#define FDC37M60X_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define FDC37M60X_CONFIG_POWER_CONTROL 0x22 /* Power Control. */ +#define FDC37M60X_CONFIG_POWER_MGMT 0x23 /* Intelligent Power Mgmt. */ +#define FDC37M60X_CONFIG_OSC 0x24 /* OSC. */ + +#define FDC37M60X_CONFIGURATION_PORT 0x3f0 /* Write-only. */ + +/* The content of FDC37M60X_CONFIG_REG_LDN (index 0x07) must be set to the + LDN the register belongs to, before you can access the register. */ +static void fdc37m60x_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(FDC37M60X_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +/* Enable the peripheral devices on the FDC37M60X Super I/O chip. */ +static void fdc37m60x_enable_serial(device_t dev, unsigned iobase) +{ + /* (1) Enter the configuration state. */ + outb(0x55, FDC37M60X_CONFIGURATION_PORT); + + /* (2) Modify the data of configuration registers. */ + + /* Power on all devices by setting the respective bit. + Bits: 0 (FDC), 3 (PP), 4 (Com1), 5 (Com2). The rest is reserved. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_CONTROL, 0x39); + + /* Disable intelligent power management. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_MGMT, 0x00); + + /* Turn on OSC, turn on BRG clock. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_OSC, 0x04); + + /* Configure serial port 1. */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x60, 0x03); + fdc37m60x_sio_write(FDC37M60X_SP1, 0x61, 0xf8); /* I/O 0x3f8 */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x70, 0x04); /* IRQ 4 */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0xf0, 0x00); /* Normal */ + + /* Enable serial port 1. */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x30, 0x01); + + /* (3) Exit the configuration state. */ + outb(0xaa, FDC37M60X_CONFIGURATION_PORT); +} +
Added: trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/superio.c =================================================================== --- trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/superio.c (rev 0) +++ trunk/LinuxBIOSv2/src/superio/smsc/fdc37m60x/superio.c 2006-12-14 14:26:46 UTC (rev 2525) @@ -0,0 +1,87 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pnp.h> +#include <uart8250.h> +#include <pc80/keyboard.h> +#include "chip.h" +#include "fdc37m60x.h" + +static void init(device_t dev) +{ + struct superio_smsc_fdc37m60x_config *conf; + struct resource *res0, *res1; + + if (!dev->enabled) { + return; + } + + conf = dev->chip_info; + + switch (dev->path.u.pnp.device) { + case FDC37M60X_FDC: /* TODO. */ + break; + case FDC37M60X_PP: /* TODO. */ + break; + case FDC37M60X_SP1: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com1); + break; + case FDC37M60X_SP2: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com2); + break; + case FDC37M60X_KBCK: + res0 = find_resource(dev, PNP_IDX_IO0); + res1 = find_resource(dev, PNP_IDX_IO1); + init_pc_keyboard(res0->base, res1->base, &conf->keyboard); + break; + case FDC37M60X_AUX: /* TODO. */ + break; + } +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = pnp_set_resources, + .enable_resources = pnp_enable_resources, + .enable = pnp_enable, + .init = init, +}; + +/* TODO: FDC, PP, AUX. */ +static struct pnp_info pnp_dev_info[] = { + { &ops, FDC37M60X_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, FDC37M60X_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, }, + { &ops, FDC37M60X_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, }, +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &pnp_ops, + sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); +} + +struct chip_operations superio_smsc_fdc37m60x_ops = { + CHIP_NAME("SMSC FDC37M60X Super I/O") + .enable_dev = enable_dev, +}; +
-
svn＠openbios.org