[commit] r6394 - trunk/src/cpu/amd/model_10xxx

[repository service]

Author: mjones
Date: Mon Feb 28 01:00:51 2011
New Revision: 6394
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6394

Log:
Prepare for next patches (Improving BKDG implementation of P-states,
CPU and northbridge frequency and voltage
handling for Fam 10 in SVI mode).

No change of behaviour intended.

Refactor FAM10 fidvid . Factor out the decision whether
to update northbridge frequency and voltage because there
was the same code in 3 places and so we can later modify it
in one place.

Signed-off-by: Xavi Drudis Ferran 
Acked-by: Marc Jones

Modified:
   trunk/src/cpu/amd/model_10xxx/fidvid.c

Modified: trunk/src/cpu/amd/model_10xxx/fidvid.c
==============================================================================
--- trunk/src/cpu/amd/model_10xxx/fidvid.c	Mon Feb 28 00:58:34 2011	(r6393)
+++ trunk/src/cpu/amd/model_10xxx/fidvid.c	Mon Feb 28 01:00:51 2011	(r6394)
@@ -280,7 +280,6 @@
    pci_write_config32(dev, 0x84, dword);
    dword = 0xE600A681;
    pci_write_config32(dev, 0x80, dword);
-
 }

static void prep_fid_change(void)
@@ -522,24 +521,19 @@
    return nb_cof_vid_update;
 }

-static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid)
+static u32 init_fidvid_core(u32 nodeid, u32 coreid)
 {
    device_t dev;
    u32 vid_max;
-	u32 fid_max;
+	u32 fid_max=0;
    u8 nb_cof_vid_update = needs_NB_COF_VID_update();
    u8 pvimode;
    u32 reg1fc;
-	u32 send;
-
-	printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid);

/* Steps 1-6 of BIOS NB COF and VID Configuration
     * for SVI and Single-Plane PVI Systems.
     */

-
-
    dev = NODE_PCI(nodeid, 3);
    pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1;
    reg1fc = pci_read_config32(dev, 0x1FC);
@@ -565,7 +559,17 @@
    		UpdateSinglePlaneNbVid();
    }

-	send = (nb_cof_vid_update << 16) | (fid_max << 8);
+	return ((nb_cof_vid_update << 16) | (fid_max << 8));
+
+}
+
+static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid)
+{
+	u32 send;
+
+	printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid);
+
+        send = init_fidvid_core(nodeid,coreid); 
    send |= (apicid << 24);	// ap apicid

// Send signal to BSP about this AP max fid
@@ -783,48 +787,15 @@
    u32 i;
 #endif
    struct fidvid_st fv;
-	device_t dev;
-	u32 vid_max;
-	u32 fid_max=0;
-	u8 nb_cof_vid_update = needs_NB_COF_VID_update();
-	u32 reg1fc;
-	u8 pvimode;

printk(BIOS_DEBUG, "FIDVID on BSP, APIC_id: %02x\n", bsp_apicid);
-	/* FIXME: The first half of this function is nearly the same as
-	 * init_fidvid_bsp() and the code could be combined.
-	 */

/* Steps 1-6 of BIOS NB COF and VID Configuration
     * for SVI and Single-Plane PVI Systems.
     */

-	dev = NODE_PCI(0, 3);
-	pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1;
-	reg1fc = pci_read_config32(dev, 0x1FC);
-
-	if (nb_cof_vid_update) {
-		if (pvimode) {
-			vid_max = (reg1fc >> 7) & 0x7F;
-			fid_max = (reg1fc >> 2) & 0x1F;
-
-			/* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */
-			fixPsNbVidBeforeWR(vid_max, 0);
-		} else {	/* SVI */
-			vid_max = ((reg1fc >> 7) & 0x7F) - ((reg1fc >> 17) & 0x1F);
-			fid_max = ((reg1fc >> 2) & 0x1F) + ((reg1fc >> 14) & 0x7);
-			transitionVid(vid_max, dev, IS_NB);
-		}
-
-		/*  fid setup is handled by the BSP at the end. */
-
-	} else {		/* ! nb_cof_vid_update */
-		/* Use max values */
-		if (pvimode)
-			UpdateSinglePlaneNbVid();
-	}
+	fv.common_fid = init_fidvid_core(0,0);

-	fv.common_fid = (nb_cof_vid_update << 16) | (fid_max << 8);
    print_debug_fv("BSP fid = ", fv.common_fid);

#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST && !CONFIG_SET_FIDVID_CORE0_ONLY