There is no space in MB, the HW engineer didn't connect the second sata out.
YH
-----Original Message----- From: Ronald G. Minnich [mailto:rminnich@lanl.gov] Sent: Thursday, June 09, 2005 7:53 PM To: Stephen.Kimball@bench.com Cc: linuxbios@openbios.org Subject: RE: [LinuxBIOS] Tyan S2895 Mptable
On Thu, 9 Jun 2005 Stephen.Kimball@bench.com wrote:
That's what I said ... it's disabled in the MB Config.lb, but the hardware is still there. It's only two lines in the mptable.c. Do you expect s2895 users to not need the extra 4 SATA ports?
Why not fix it?
I'm sure you know how to fix it.
I'm a little mixed up here, are the connectors and everything there?
If I see something that could be improved in the CK804 code, what should I do? So far all my suggestions have been dismissed.
Just hang in there, sorry this is frustrating for you, I don't have this mobo so can only go on what people say.
Yh Lu, why is second one disabled?
ron
LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios
On Thu, 9 Jun 2005, YhLu wrote:
There is no space in MB, the HW engineer didn't connect the second sata out.
ok, then, I guess Stephen's request for a comment in the config file would be helpful for other users too, Yh Lu, can you add a comment about that?
ron
So we have been playing with the EPIA-M/MII code. Getting very close. Joathan has been able to get us to filo, but at this point I am lost. Filo is called, but it does not look like my kernel is getting called. Here is what I see. Any ideas? Adam
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
23:stream_init() - rom_stream: 0xfffe0000 - 0xfffeffff Found ELF candiate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 000164f0 malloc 0x000164f0 New segment addr 0x100000 size 0x210a0 offset 0xe0 filesize 0x70c8 (cleaned up) New segment addr 0x100000 size 0x210a0 offset 0xe0 filesize 0x70c8 lb: [0x0000000000004000, 0x000000000001a000) malloc Enter, size 32, free_mem_ptr 00016510 malloc 0x00016510 New segment addr 0x1210a0 size 0x48 offset 0x71c0 filesize 0x48 (cleaned up) New segment addr 0x1210a0 size 0x48 offset 0x71c0 filesize 0x48 lb: [0x0000000000004000, 0x000000000001a000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000000210a0 filesz: 0x00000000000070c8 [ 0x0000000000100000, 00000000001070c8, 0x00000000001210a0) <- 00000000000000e0 Clearing Segment: addr: 0x00000000001070c8 memsz: 0x0000000000019fd8 Loading Segment: addr: 0x00000000001210a0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 [ 0x00000000001210a0, 00000000001210e8, 0x00000000001210e8) <- 00000000000071c0 Loaded segments verified segments closed down stream Jumping to boot code at 0x104ec8 entry = 0x00104ec8 lb_start = 0x00004000 lb_size = 0x00016000 adjust = 0xfcfe6000 buffer = 0xfcfd4000 elf_boot_notes = 0x000112e0 adjusted_boot_notes = 0xfcff72e0
-
Adam Talbot -
Ronald G. Minnich -
YhLu