[LinuxBIOS] r2508 build service

[LinuxBIOS information]

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2508 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
Add support for the IEI NOVA-4899R 5.25 SBC mainboard (patch submitted by
Luis Correia ). The code is loosely based on
the Eaglelion 5bcm mainboard.

Warning: this is work in progress!

As of now, it does boot with serial console only (no vga), and two ethernet
cards work sometimes. This has to do with the IRQ assignments, which are a
complete mess. USB is now apparently working, but I can't make any device
to be recognized.

The PCI slot is still unusable due to the IRQ thing.

Audio, other serial ports, irda, floppy and paralell port support is
unknown aka untested yet.

(closes #32)

Signed-off-by: Luis Correia 
Acked-by: Acked-by: Stefan Reinauer 
Acked-by: Uwe Hermann

Build Log:
Compilation of iwill:dk8_htx is still broken
Compilation of msi:ms9185 is still broken

If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision will 
be backed out.

Yours truely,
     LinuxBIOS automatic build system

[Segher Boessenkool]

> Change Log:
> Add support for the IEI NOVA-4899R 5.25 SBC mainboard (patch submitted 
> by
> Luis Correia ). The code is loosely based on
> the Eaglelion 5bcm mainboard.
> Build Log:
> Compilation of iwill:dk8_htx is still broken
> Compilation of msi:ms9185 is still broken

Did the new board get tested too already in this run?
If so (and/or whenever a new board gets added to the
testing), can the build service tell us about that, too?

Segher