[commit] r5179 - in trunk/src: . northbridge/amd/amdht

[repository service]

Author: oxygene
Date: Mon Mar  1 11:30:08 2010
New Revision: 5179
URL: http://tracker.coreboot.org/trac/coreboot/changeset/5179

Log:
Allow per-board setting of HT clock and width so
less than optimal PCB designs can still work reliably
with reduced clock.

Signed-off-by: Timothy Pearson <[e-mail]>
Acked-by: Patrick Georgi <[e-mail]>

Modified:
   trunk/src/Kconfig
   trunk/src/northbridge/amd/amdht/h3finit.c

Modified: trunk/src/Kconfig
==============================================================================
--- trunk/src/Kconfig	Mon Mar  1 10:09:33 2010	(r5178)
+++ trunk/src/Kconfig	Mon Mar  1 11:30:08 2010	(r5179)
@@ -56,6 +56,78 @@
 comment "CPU"
 source src/cpu/Kconfig
 comment "Northbridge"
+
+menu "HyperTransport Setup"
+	depends on (NORTHBRIDGE_AMD_AMDK8 || NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
+
+choice
+	prompt "HyperTransport Frequency"
+	default LIMIT_HT_SPEED_AUTO
+	help
+	  This option sets the maximum permissible HyperTransport link frequency.
+	  Use of this option will only limit the autodetected HT frequency; it will not (and cannot) increase the frequency beyond the autodetected limits.
+	  This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_SPEED_200
+	bool "Limit HT frequency to 200MHz"
+config LIMIT_HT_SPEED_400
+	bool "Limit HT frequency to 400MHz"
+config LIMIT_HT_SPEED_600
+	bool "Limit HT frequency to 600MHz"
+config LIMIT_HT_SPEED_800
+	bool "Limit HT frequency to 800MHz"
+config LIMIT_HT_SPEED_1000
+	bool "Limit HT frequency to 1.0GHz"
+config LIMIT_HT_SPEED_1200
+	bool "Limit HT frequency to 1.2GHz"
+config LIMIT_HT_SPEED_1400
+	bool "Limit HT frequency to 1.4GHz"
+config LIMIT_HT_SPEED_1600
+	bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_1800
+        bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_2000
+        bool "Limit HT frequency to 2.0GHz"
+config LIMIT_HT_SPEED_2200
+        bool "Limit HT frequency to 2.2GHz"
+config LIMIT_HT_SPEED_2400
+        bool "Limit HT frequency to 2.4GHz"
+config LIMIT_HT_SPEED_2600
+        bool "Limit HT frequency to 2.6GHz"
+config LIMIT_HT_SPEED_AUTO
+	bool "Autodetect HT frequency"
+endchoice
+
+choice
+	prompt "HyperTransport Downlink Width"
+	default LIMIT_HT_DOWN_WIDTH_16
+	help
+	  This option sets the maximum permissible HyperTransport link width.
+	  Use of this option will only limit the autodetected HT width; it will not (and cannot) increase the width beyond the autodetected limits.
+	  This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_DOWN_WIDTH_8
+	bool "8 bits"
+config LIMIT_HT_DOWN_WIDTH_16
+	bool "16 bits"
+endchoice
+
+choice
+	prompt "HyperTransport Uplink Width"
+	default LIMIT_HT_UP_WIDTH_16
+	help
+	  This option sets the maximum permissible HyperTransport link width.
+	  Use of this option will only limit the autodetected HT width; it will not (and cannot) increase the width beyond the autodetected limits.
+	  This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_UP_WIDTH_8
+	bool "8 bits"
+config LIMIT_HT_UP_WIDTH_16
+	bool "16 bits"
+endchoice
+
+endmenu
+
 source src/northbridge/Kconfig
 comment "Southbridge"
 source src/southbridge/Kconfig

Modified: trunk/src/northbridge/amd/amdht/h3finit.c
==============================================================================
--- trunk/src/northbridge/amd/amdht/h3finit.c	Mon Mar  1 10:09:33 2010	(r5178)
+++ trunk/src/northbridge/amd/amdht/h3finit.c	Mon Mar  1 11:30:08 2010	(r5179)
@@ -1327,9 +1327,51 @@
 
 	for (i = 0; i < pDat->TotalLinks*2; i += 2)
 	{
-		cbPCBFreqLimit = 0xFFFF;
+#if CONFIG_LIMIT_HT_SPEED_200
+		cbPCBFreqLimit = 0x0001;
+#elif CONFIG_LIMIT_HT_SPEED_300
+		cbPCBFreqLimit = 0x0003;
+#elif CONFIG_LIMIT_HT_SPEED_400
+		cbPCBFreqLimit = 0x0007;
+#elif CONFIG_LIMIT_HT_SPEED_500
+		cbPCBFreqLimit = 0x000F;
+#elif CONFIG_LIMIT_HT_SPEED_600
+		cbPCBFreqLimit = 0x001F;
+#elif CONFIG_LIMIT_HT_SPEED_800
+		cbPCBFreqLimit = 0x003F;
+#elif CONFIG_LIMIT_HT_SPEED_1000
+		cbPCBFreqLimit = 0x007F;
+#elif CONFIG_LIMIT_HT_SPEED_1200
+		cbPCBFreqLimit = 0x00FF;
+#elif CONFIG_LIMIT_HT_SPEED_1400
+		cbPCBFreqLimit = 0x01FF;
+#elif CONFIG_LIMIT_HT_SPEED_1600
+		cbPCBFreqLimit = 0x03FF;
+#elif CONFIG_LIMIT_HT_SPEED_1800
+		cbPCBFreqLimit = 0x07FF;
+#elif CONFIG_LIMIT_HT_SPEED_2000
+		cbPCBFreqLimit = 0x0FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2200
+		cbPCBFreqLimit = 0x1FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2400
+		cbPCBFreqLimit = 0x3FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2600
+		cbPCBFreqLimit = 0x7FFF;
+#else
+		cbPCBFreqLimit = 0xFFFF;		// Maximum allowed by autoconfiguration
+#endif
+
+#if CONFIG_LIMIT_HT_DOWN_WIDTH_8
+		cbPCBABDownstreamWidth = 8;
+#else
 		cbPCBABDownstreamWidth = 16;
+#endif
+
+#if CONFIG_LIMIT_HT_UP_WIDTH_8
+		cbPCBBAUpstreamWidth = 8;
+#else
 		cbPCBBAUpstreamWidth = 16;
+#endif
 
 		if ( (pDat->PortList[i].Type == PORTLIST_TYPE_CPU) && (pDat->PortList[i+1].Type == PORTLIST_TYPE_CPU))
 		{