[v2] r4184 - in trunk/coreboot-v2: src/mainboard src/mainboard/hp src/mainboard/hp/dl145_g3 targets targets/hp targets/hp/dl145_g3
Author: myles Date: 2009-04-22 22:34:05 +0200 (Wed, 22 Apr 2009) New Revision: 4184
Added: trunk/coreboot-v2/src/mainboard/hp/ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Config.lb trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Options.lb trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c trunk/coreboot-v2/src/mainboard/hp/dl145_g3/chip.h trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cmos.layout trunk/coreboot-v2/src/mainboard/hp/dl145_g3/get_bus_conf.c trunk/coreboot-v2/src/mainboard/hp/dl145_g3/irq_tables.c trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mainboard.c trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mb_sysconf.h trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mptable.c trunk/coreboot-v2/targets/hp/ trunk/coreboot-v2/targets/hp/dl145_g3/ trunk/coreboot-v2/targets/hp/dl145_g3/Config.lb Log: This patch adds the target hp/dl145_g3 together with the appropriate mainboard sources.
Signed-off-by: Mondrian nuessle nuessle@uni-hd.de Acked-by: Samuel Verstraete samuel.verstraete@gmail.com
I updated some whitespace and the Config files. - Myles
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Config.lb =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Config.lb (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Config.lb 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,224 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 AMD +## Written by Yinghai Lu yinghailu@gmail.com for AMD. +## +## Copyright (C) 2007 University of Mannheim +## Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim +## +## Copyright (C) 2009 University of Heidelberg +## Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +include /config/nofailovercalculation.lb + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end + +if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + end +else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end +end + +## +## Build our 16 bit and 32 bit coreboot entry code +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds +end + +mainboardinit cpu/x86/32bit/entry32.inc + + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end + +## +## Build our reset vector (This is where coreboot is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc + +### +### This is the early phase of coreboot startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + + +# config for hp/dl145_g3 +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 # northbridge + device pci 18.0 on # devices on link 0 + chip southbridge/broadcom/bcm21000 # HT2100 + device pci 0.0 on + end # bridge to slot PCI-E 4x ?? + device pci 1.0 on + end + device pci 2.0 on + end # unused + device pci 3.0 on # bridge to slot PCI-E 16x ?? + end + device pci 4.0 on + end # unused + device pci 5.0 on + device pci 4.0 on end # BCM5715 NIC + device pci 4.1 on end # BCM5715 NIC + end + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PCI/PCI-X bridge 0x0104 + device pci e.0 on end # SATA 0x024a + end + device pci 1.0 on end # Legacy pci main 0x0205 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.3 off # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.4 off end # SWC + device pnp 4e.5 off end # Mouse + device pnp 4e.6 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.7 off end # GPIO + device pnp 4e.f off end # XBUS + device pnp 4e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end # end superio + end # end pci 1.2 + device pci 1.3 off end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + chip drivers/pci/onboard + # it is in bcm5785_0 bus, but the device id can + # not be changed even unitid is changed, fake one + # to get the rom_address + # if HT_CHAIN_END_UNITID_BASE=0, it is 4, + # if HT_CHAIN_END_UNITID_BASE=1, it is 3 + device pci 4.0 on end + register "rom_address" = "0xfff00000" + end + #bx_a013+ start + #chip drivers/pci/onboard #SATA2 + # device pci 5.0 on end + # device pci 5.1 on end + # device pci 5.2 on end + # device pci 5.3 on end + #end + #bx_a013+ end + end + end + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # amdk8 + + end #pci_domain +end + +
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Options.lb =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Options.lb (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/Options.lb 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,333 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 AMD +## Written by Yinghai Lu yinghailu@gmail.com for AMD. +## +## Copyright (C) 2007 University of Mannheim +## Written by Philipp Degler pdegler@rumms.uni-mannheim.de for Uni Mannheim +## Copyright (C) 2009 University of Heidelberg +## Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_ACPI_TABLES +uses ACPI_SSDTX_NUM +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC +uses K8_HT_FREQ_1G_SUPPORT +uses CONFIG_CBFS + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses SERIAL_CPU_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses CONFIG_LB_MEM_TOPK + +uses CONFIG_USE_PRINTK_IN_CAR + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 + +#more 1M for pgtbl +default CONFIG_LB_MEM_TOPK=2048 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=15 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default coreboot cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 +default CONFIG_LOGICAL_CPUS=1 + +default SERIAL_CPU_INIT=0 + +default ENABLE_APIC_EXT_ID=0 +default APIC_ID_OFFSET=0x8 +default LIFT_BSP_APIC_ID=1 + +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +#default HW_MEM_HOLE_SIZEK=0x200000 +#1G +default HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +#HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0x06 + +#real SB Unit ID, default is 0x20, mean dont touch it at last +default HT_CHAIN_END_UNITID_BASE=0x01 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=2 + +#only offset for SB chain?, default is yes(1) +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcc000 +default DCACHE_RAM_SIZE=0x04000 +default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_INIT=0 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="DL145 G3" +default MAINBOARD_VENDOR="HP" +#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 +#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 + +### +### coreboot layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 32K heap +## +default HEAP_SIZE=0x8000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## Coreboot C code runs at this location in RAM +## +default _RAMBASE=0x00100000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +#enabel printk in CAR by default +default CONFIG_USE_PRINTK_IN_CAR=1 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,379 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Tyan + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 + +#define K8_ALLOCATE_IO_RANGE 1 +//#define K8_SCAN_PCI_BUS 1 + +#define QRANK_DIMM_SUPPORT 1 + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 0 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#define DBGP_DEFAULT 7 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + + +#if USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include <cpu/amd/model_fxx_rev.h> + +#include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#include "superio/serverengines/pilot/pilot_early_serial.c" +#include "superio/serverengines/pilot/pilot_early_init.c" +#include "superio/nsc/pc87417/pc87417_early_serial.c" + + +#if USE_FAILOVER_IMAGE==0 + +#include "cpu/x86/bist.h" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif + +#include "northbridge/amd/amdk8/debug.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) +#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) + +#include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c" + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_SWITCH1 0x70 +#define SMBUS_SWITCH2 0x72 + unsigned device = (ctrl->channel0[0]) >> 8; + smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit_f.c" + +#include "sdram/generic_sdram.c" + +//#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +//first node +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +//second node +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" + +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" + +#endif + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) + +#include "northbridge/amd/amdk8/early_ht.c" + +#if 0 +#include "ipmi.c" + +static void setup_early_ipmi_serial() +{ + unsigned char result; + char channel_access[]={0x06<<2,0x40,0x04,0x80,0x05}; + char serialmodem_conf[]={0x0c<<2,0x10,0x04,0x08,0x00,0x0f}; + char serial_mux1[]={0x0c<<2,0x12,0x04,0x06}; + char serial_mux2[]={0x0c<<2,0x12,0x04,0x03}; + char serial_mux3[]={0x0c<<2,0x12,0x04,0x07}; + +// earlydbg(0x0d); + //set channel access system only + ipmi_request(5,channel_access); +// earlydbg(result); +/* + //Set serial/modem config + result=ipmi_request(6,serialmodem_conf); + earlydbg(result); + + //Set serial mux 1 + result=ipmi_request(4,serial_mux1); + earlydbg(result); + + //Set serial mux 2 + result=ipmi_request(4,serial_mux2); + earlydbg(result); + + //Set serial mux 3 + result=ipmi_request(4,serial_mux3); + earlydbg(result); +*/ +// earlydbg(0x0e); + +} +#endif + + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + /* Is this a cpu only reset? Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal()) { // RTC already inited + goto normal_image; //normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + bcm5785_enable_rom(); + bcm5785_enable_lpc(); + //enable RTC + pc87417_enable_dev(RTC_DEV); + + /* Is this a deliberate reset by the bios */ + + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; + +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if HAVE_FAILOVER_BOOT==1 + #if USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, +#endif + + }; + + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; + unsigned bsp_apicid = 0; + + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + pilot_enable_serial(SERIAL_DEV, TTYS0_BASE); + + //setup_mp_resource_map(); + + uart_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + + console_init(); +// setup_early_ipmi_serial(); + pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + bcm5785_early_setup(); + +#if K8_SET_FIDVID == 1 + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + } +#endif + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + + memreset_setup(); + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); + +} + +#endif
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/chip.h =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/chip.h (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/chip.h 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +}; +
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cmos.layout =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cmos.layout (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/cmos.layout 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + +
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/get_bus_conf.c =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/get_bus_conf.c (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/get_bus_conf.c 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +static unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + + m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_bcm5780[0] = m->bus_bcm5785_0; + + /* bcm5785 */ + printk_debug("search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); + dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + printk_debug("found dev %s...\n",dev_path(dev)); + m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + printk_debug("secondary is %d...\n",m->bus_bcm5785_1); + dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); + printk_debug("now found %s...\n",dev_path(dev)); + if(dev) { + m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + printk_debug("bus_isa 1=%d\n",m->bus_isa); +#endif + } + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); + } + + /* bcm5780 */ + for(i = 1; i < 6; i++) { + dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); + if(dev) { + m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + printk_debug("bus_isa 2=%d\n",m->bus_isa); +#endif + + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); + } + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + for(i=0;i<3;i++) + m->apicid_bcm5785[i] = apicid_base+i; +}
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/irq_tables.c =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/irq_tables.c (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/irq_tables.c 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,59 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * + * Contains the IRQ Routing Table dumped directly from your + * memory, which BIOS sets up. + * + * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx + */ + +#ifdef GETPIR +#include "pirq_routing.h" +#else +#include <arch/pirq_routing.h> +#endif + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*15, /* There can be total 19 devices on the bus */ + 0x0, /* Where the interrupt router lies (bus) */ + (0x2<<3)|0x4, + 0, /* IRQs devoted exclusively to PCI usage */ + 0, /* Vendor */ + 0, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x2a, /* u8 checksum. This has to be set to some + value that would give 0 after the sum of all + bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + {0x00,(0x02<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge + {0x00,(0x03<<3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb + {0x00,(0x04<<3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr + {0x00,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge + {0x01,(0x0e<<3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA + {0x01,(0x0d<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge + //{0x02,(0x01<<3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x06<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x03,(0x00<<3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0}, + {0x00,(0x07<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x08<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x09<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x06,(0x00<<3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x07,(0x00<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, + {0x08,(0x04<<3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + //{0x10,(0x01<<3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0}, + {0x40,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} +
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mainboard.c =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mainboard.c (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mainboard.c 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,34 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for Uni of Mannheim. + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("HP DL145 G3 Mainboard") +};
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mb_sysconf.h =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mb_sysconf.h (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mb_sysconf.h 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_bcm5780[7]; + unsigned char bus_bcm5785_0; + unsigned char bus_bcm5785_1; + unsigned char bus_bcm5785_1_1; + unsigned apicid_bcm5785[3]; + + unsigned sbdn2; +}; + +#endif +
Added: trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mptable.c =================================================================== --- trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mptable.c (rev 0) +++ trunk/coreboot-v2/src/mainboard/hp/dl145_g3/mptable.c 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/io.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "HP "; + static const char productid[12] = "TREX "; + struct mp_config_table *mc; + + unsigned char bus_num; + int i; + struct mb_sysconf_t *m; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + m = sysconf.mb; + + /*Bus: Bus ID Type*/ + /* define bus and isa numbers */ +/* for(bus_num = 0; bus_num < m->bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + printk_debug("writing bus %d as PCI...\n",bus_num); + } + */ + smp_write_bus(mc, 0, "PCI "); + smp_write_bus(mc, 1, "PCI "); + smp_write_bus(mc, 7, "PCI "); + smp_write_bus(mc, 8, "PCI "); + + smp_write_bus(mc,m->bus_isa, "ISA "); + printk_debug("writing %d as ISA...\n",m->bus_isa); + + /*I/O APICs: APIC ID Version State Address*/ + { + device_t dev = 0; + int i; + struct resource *res; + for(i=0; i<3; i++) { + dev = dev_find_device(0x1166, 0x0235, dev); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + printk_debug("APIC %d base address: %x\n",m->apicid_bcm5785[i], res->base); + smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); + } + } + } + + } + + /* IRQ routing as factory BIOS */ + outb(0x01, 0xc00); outb(0x0A, 0xc01); + outb(0x17, 0xc00); outb(0x05, 0xc01); +/* outb(0x2E, 0xc00); outb(0x0B, 0xc01); */ +/* outb(0x07, 0xc00); outb(0x07, 0xc01); */ + outb(0x07, 0xc00); outb(0x0b, 0xc01); + + outb(0x24, 0xc00); outb(0x05, 0xc01); + //outb(0x00, 0xc00); outb(0x09, 0xc01); + outb(0x02, 0xc00); outb(0x0E, 0xc01); + + // 8259 registers... + outb(0xa0, 0x4d0); + outb(0x0e, 0x4d1); + + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7 + pci_write_config32(dev, 0x64, dword); + } + // set GEVENT pins to NO OP + outb(0x33, 0xcd6); outb(0x00, 0xcd7); + outb(0x34, 0xcd6); outb(0x00, 0xcd7); + outb(0x35, 0xcd6); outb(0x00, 0xcd7); + } + + // hide XIOAPIC PCI configuration space + { + device_t dev; + dev = dev_find_device(0x1166, 0x205, 0); + if (dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<26); + pci_write_config32(dev, 0x64, dword); + } + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_bcm5785[0], 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_bcm5785[0], 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_bcm5785[0], 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_bcm5785[0], 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_bcm5785[0], 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_bcm5785[0], 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_bcm5785[0], 0x6); + //SATA +/* printk_debug("MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ +/* smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ + printk_debug("MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_bcm5785[0], 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_bcm5785[0], 0x9); + //USB + printk_debug("sysconf.sbdn: %d on bus: %x \n",sysconf.sbdn, m->bus_bcm5785_0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x03<<2)|0, m->apicid_bcm5785[0], 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xb, m->apicid_bcm5785[0], 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_bcm5785[0], 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_bcm5785[0], 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_bcm5785[0], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_bcm5785[0], 0xf); + + //VGA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x4<<2)|0, m->apicid_bcm5785[1], 0x7); + + //PCIE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0, m->apicid_bcm5785[2], 0xe); + + //IDE +// outb(0x02, 0xc00); outb(0x0e, 0xc01); +// printk_debug("MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); +// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, (0x02<<2)|1, m->apicid_bcm5785[0], 0xe); + + //onboard Broadcom GbE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|0, m->apicid_bcm5785[2], 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|1, m->apicid_bcm5785[2], 0x4); + + + + /* enable int */ + /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x6c); + dword |= (1<<4); // enable interrupts + printk_debug("6ch: %x\n",dword); + pci_write_config32(dev, 0x6c, dword); + } + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + printk_debug("m->bus_isa is: %x\n",m->bus_isa); + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa , 0x0, MP_APIC_ALL, 0x1); + + //extended table entries + smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); + smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); + smp_write_bus_hierarchy(mc, 9, 0x01, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); + + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +}
Added: trunk/coreboot-v2/targets/hp/dl145_g3/Config.lb =================================================================== --- trunk/coreboot-v2/targets/hp/dl145_g3/Config.lb (rev 0) +++ trunk/coreboot-v2/targets/hp/dl145_g3/Config.lb 2009-04-22 20:34:05 UTC (rev 4184) @@ -0,0 +1,46 @@ +## +## This file is part of the Coreboot project. +## +## Copyright (C) 2007 University of Mannheim +## Written by Philipp Degler pdegler@rumms.uni-mannheim.de +## Copyright (C) 2009 University of Heidelberg +## Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target dl145_g3 +mainboard hp/dl145_g3 + +# Leave 32K for VGA ROM +option ROM_SIZE= 1024*1024 - 32*1024 + +romimage "normal" + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=0x20000 + option XIP_ROM_SIZE=0x20000 + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" + payload ../payload.elf +end + +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=0x20000 + option XIP_ROM_SIZE=0x20000 + option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" + payload ../payload.elf +end + +buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
-
svn＠coreboot.org