Re: [LinuxBIOS] DK8-HTX Early Hang with HTX Card Intsalled

[Mondrian Nuessle]

> I have to cart it to the rack to actually try the IB, and since I'm
> having to hot-swap from the Iwill bios every time I flash (any clue
> why flashrom -w when booting under LB fails immediately with "ERASE
> FAILED" and trashes the image in flash?)

Try to add the following io statements to your 
src/mainboard/iwill/dk8_htx/Config.lb at the point where the logical 
device 8 of the superio is intialized:

device pnp 2e.8 on  #  GPIO2
       io 0x07 = 0x08ff
       io 0x30 = 0x01ff
       io 0x2b = 0xd0ff
       io 0xf0 = 0xef16
end

I hope this does the flash trick :-)

Regards,
Mondrian

[LinuxBIOS] DK8-HTX Early Hang with HTX Card Intsalled

> Try to add the following io statements to your 
> src/mainboard/iwill/dk8_htx/Config.lb at the point where the logical 
> device 8 of the superio is intialized:
>
> device pnp 2e.8 on  #  GPIO2
>        io 0x07 = 0x08ff
>        io 0x30 = 0x01ff
>        io 0x2b = 0xd0ff
>        io 0xf0 = 0xef16
> end
>
> I hope this does the flash trick :-)

Yep, that fixed it!  That makes life _way_ less screwdriver/paperclip-
intensive.

Many thanks,

-mcq