Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2815
-gerrit
commit bdd0fdbd77629b93bd939c55566692148d8ad363 Author: Duncan Laurie dlaurie@chromium.org Date: Fri Mar 8 16:34:33 2013 -0800
lynxpoint: Fix GPIO and PM base reservations
The kernel ACPI was not happy with the Add inside a ResourceTemplate (or perhaps within the IO declaration)
Instead make a buffer of IO reservations and turn _CRS into a method that updates the buffer depending on the chipset type.
This adds an \ISLP() method that checks the chipset LPC device ID to see if it is -LP or -H.
It also increases the PM base reservation to 256 bytes and moves both GPIO and PM base to above 0x1000 on -LP chipsets.
Change-Id: I747b658588a4d8ed15a0134009a7c0d74b3916ba Signed-off-by: Duncan Laurie dlaurie@chromium.org --- src/southbridge/intel/lynxpoint/acpi/lpc.asl | 102 +++++++++++++++++++-------- src/southbridge/intel/lynxpoint/acpi/pch.asl | 12 +++- src/southbridge/intel/lynxpoint/lpc.c | 4 +- src/southbridge/intel/lynxpoint/pch.h | 5 +- 4 files changed, 90 insertions(+), 33 deletions(-)
diff --git a/src/southbridge/intel/lynxpoint/acpi/lpc.asl b/src/southbridge/intel/lynxpoint/acpi/lpc.asl index 03d61eb..f9bf578 100644 --- a/src/southbridge/intel/lynxpoint/acpi/lpc.asl +++ b/src/southbridge/intel/lynxpoint/acpi/lpc.asl @@ -28,6 +28,8 @@ Device (LPCB) OperationRegion(LPC0, PCI_Config, 0x00, 0x100) Field (LPC0, AnyAcc, NoLock, Preserve) { + Offset (0x3), + DIDH, 8, // Device ID High Byte Offset (0x40), PMBS, 16, // PMBASE Offset (0x60), // Interrupt Routing Registers @@ -181,36 +183,80 @@ Device (LPCB) { Name (_HID, EISAID("PNP0C02")) Name (_UID, 2) - Name (_CRS, ResourceTemplate() + + Name (RBUF, ResourceTemplate() { - IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO - IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO - IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status - IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post - IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI - //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap - IO (Decode16, DEFAULT_PMBASE, DEFAULT_PMBASE, 0x1, 0x80) // ICH7-M ACPI - -#if CONFIG_INTEL_LYNXPOINT_LP - // LynxPoint LP GPIO is 1KB - IO (Decode16, DEFAULT_GPIOBASE, - DEFAULT_GPIOBASE, 0x1, 0xff) - IO (Decode16, Add(DEFAULT_GPIOBASE, 0x100), - Add(DEFAULT_GPIOBASE, 0x100), 0x1, 0xff) - IO (Decode16, Add(DEFAULT_GPIOBASE, 0x200), - Add(DEFAULT_GPIOBASE, 0x200), 0x1, 0xff) - IO (Decode16, Add(DEFAULT_GPIOBASE, 0x300), - Add(DEFAULT_GPIOBASE, 0x300), 0x1, 0xff) -#else - // LynxPoint GPIO is 128 bytes - IO (Decode16, DEFAULT_GPIOBASE, - DEFAULT_GPIOBASE, 0x1, DEFAULT_GPIOSIZE) -#endif + IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO + IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO + IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status + IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post + IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI + IO (Decode16, DEFAULT_PMBASE, DEFAULT_PMBASE, + 0x1, 0xff) + + // GPIO region may be 128 bytes or 4096 bytes + IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, + 0x1, 0x00, GPR1) + IO (Decode16, 0x0000, 0x0000, 0x1, 0x00, GPR2) + IO (Decode16, 0x0000, 0x0000, 0x1, 0x00, GPR3) + IO (Decode16, 0x0000, 0x0000, 0x1, 0x00, GPR4) }) + + Method (_CRS, 0, NotSerialized) + { + CreateByteField (^RBUF, ^GPR1._LEN, R1LN) + CreateByteField (^RBUF, ^GPR2._LEN, R2LN) + CreateByteField (^RBUF, ^GPR3._LEN, R3LN) + CreateByteField (^RBUF, ^GPR4._LEN, R4LN) + + CreateWordField (^RBUF, ^GPR1._MIN, R1MN) + CreateWordField (^RBUF, ^GPR2._MIN, R2MN) + CreateWordField (^RBUF, ^GPR3._MIN, R3MN) + CreateWordField (^RBUF, ^GPR4._MIN, R4MN) + + CreateWordField (^RBUF, ^GPR1._MAX, R1MX) + CreateWordField (^RBUF, ^GPR2._MAX, R2MX) + CreateWordField (^RBUF, ^GPR3._MAX, R3MX) + CreateWordField (^RBUF, ^GPR4._MAX, R4MX) + + // Update GPIO region for LynxPoint-LP + If (\ISLP ()) { + // LynxPoint-LP + Store (R1MN, Local0) + + // Update GPIO bank 1 + Store (Local0, R1MN) + Store (Local0, R1MX) + Store (0xff, R1LN) + + // Update GPIO bank 2 + Add (Local0, 0x100, Local0) + Store (Local0, R2MN) + Store (Local0, R2MX) + Store (0xff, R2LN) + + // Update GPIO bank 3 + Add (Local0, 0x100, Local0) + Store (Local0, R3MN) + Store (Local0, R3MN) + Store (0xff, R3LN) + + // Update GPIO bank 4 + Add (Local0, 0x100, Local0) + Store (Local0, R4MN) + Store (Local0, R4MN) + Store (0xff, R4LN) + } Else { + // LynxPoint-H + // Update GPIO region length + Store (DEFAULT_GPIOSIZE, R1LN) + } + Return (RBUF) + } }
Device (RTC) // Real Time Clock diff --git a/src/southbridge/intel/lynxpoint/acpi/pch.asl b/src/southbridge/intel/lynxpoint/acpi/pch.asl index 8632ad8..ce8f0e0 100644 --- a/src/southbridge/intel/lynxpoint/acpi/pch.asl +++ b/src/southbridge/intel/lynxpoint/acpi/pch.asl @@ -23,6 +23,16 @@
Scope() { + // Return TRUE if chipset is LynxPoint-LP + Method (ISLP, 0, NotSerialized) + { + If (LEqual (_SB.PCI0.LPCB.DIDH, 0x9c)) { + Return (1) + } else { + Return (0) + } + } + // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
OperationRegion(IO_T, SystemIO, 0x800, 0x10) @@ -33,7 +43,7 @@ Scope() }
// PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) - OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0x80) + OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0xff) Field(PMIO, ByteAcc, NoLock, Preserve) { Offset(0x20), // GPE0_STS diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 89cf9e7..89d7350 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -630,11 +630,11 @@ static void pch_lpc_add_io_resources(device_t dev) res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
/* GPIOBASE */ - pch_lpc_add_io_resource(dev, DEFAULT_GPIOBASE, DEFAULT_GPIOSIZE, + pch_lpc_add_io_resource(dev, get_gpiobase(), DEFAULT_GPIOSIZE, GPIO_BASE);
/* PMBASE */ - pch_lpc_add_io_resource(dev, DEFAULT_PMBASE, 128, PMBASE); + pch_lpc_add_io_resource(dev, get_pmbase(), 256, PMBASE);
/* LPC Generic IO Decode range. */ pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index f2953d2..ee2efd5 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -65,12 +65,13 @@ */ #define SMBUS_IO_BASE 0x0400 #define SMBUS_SLAVE_ADDR 0x24 -#define DEFAULT_PMBASE 0x0500
#if CONFIG_INTEL_LYNXPOINT_LP -#define DEFAULT_GPIOBASE 0x1000 +#define DEFAULT_PMBASE 0x1000 +#define DEFAULT_GPIOBASE 0x1400 #define DEFAULT_GPIOSIZE 0x400 #else +#define DEFAULT_PMBASE 0x500 #define DEFAULT_GPIOBASE 0x480 #define DEFAULT_GPIOSIZE 0x80 #endif
-
Stefan Reinauer