Re: epia-m (600mhz) -- /dev/ttyS1

[Dave Ashley]

> perfect!!!

Can you verify something: On my epia-m ttyS0 is 1/2 the baud rate it should
be, so I can't get 115,200 baud, only 57,600. Can you verify if you can
get 115,200 on both serial ports?

-Dave

epia-m (600mhz) -- /dev/ttyS1

[Niki Waibel]

def sure 57600 is (currently) the max on /dev/ttyS0.
(but my setup is 115200).
i dont care much, but of course it should be fixed.

/dev/ttyS0 was at 115200 when i changed from the regular
bios to linuxbios. a soft reset was ok -- still 115200.
but after pressing the power switch the port was at
57600 max.

i have to check ttyS1...
(i am working with devfs so i might refer to tts/1 in furure...)

niki

On 18-Nov-2003 Dave Ashley wrote:
> > perfect!!!
>
> Can you verify something: On my epia-m ttyS0 is 1/2 the baud rate it should
> be, so I can't get 115,200 baud, only 57,600. Can you verify if you can
> get 115,200 on both serial ports?
>
> -Dave
> _______________________________________________
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios

epia-m (600mhz) -- /dev/ttyS1

[Andrew Ip]

Hi,

I think there is a clock has to be set.  I have seen similar problem with
USB on a custom board.  After setting the clock gen which connected to USB,
USB works.

-Andrew

On Tue, Nov 18, 2003 at 10:42:52AM +0100, Niki Waibel wrote:
> def sure 57600 is (currently) the max on /dev/ttyS0.
> (but my setup is 115200).
> i dont care much, but of course it should be fixed.
>
> /dev/ttyS0 was at 115200 when i changed from the regular
> bios to linuxbios. a soft reset was ok -- still 115200.
> but after pressing the power switch the port was at
> 57600 max.
>
> i have to check ttyS1...
> (i am working with devfs so i might refer to tts/1 in furure...)
>
> niki
>
> On 18-Nov-2003 Dave Ashley wrote:
> > > perfect!!!
> >
> > Can you verify something: On my epia-m ttyS0 is 1/2 the baud rate it should
> > be, so I can't get 115,200 baud, only 57,600. Can you verify if you can
> > get 115,200 on both serial ports?
> >
> > -Dave
> > _______________________________________________
> > Linuxbios mailing list
> > [e-mail]
> > http://www.clustermatic.org/mailman/listinfo/linuxbios