Re: [coreboot] new problem with KGPE-d16

[Nico Huber]

IIRC, https://review.coreboot.org/#/c/17910/ fixed something similar.
It's merged yet, do you have it applied?

Nico

On 09.01.2017 23:27, David Hendricks via coreboot wrote:
> Iru had a similar problem very recently:
> https://www.coreboot.org/pipermail/coreboot/2017-January/082806.html
>
> Iru - Were you able to resolve the issue you saw?
>
> On Mon, Jan 9, 2017 at 2:13 PM, ron minnich  wrote:
> > what's weird is coreboot is unchanged, just the payload.
> >
> > I am wondering if anyone recognizes this
> >
> > IMD small region:
> >   IMD ROOT    0. bfffec00 00000400
> >   ROMSTAGE    1. bfffebe0 00000004
> >   GDT         2. bfffe9e0 00000200
> > Writing AMD DCT configuration to Flash
> > CBFS: 'Master Header Locator' located CBFS at [100:ffffc0)
> > CBFS: Locating 's3nv'
> > CBFS: Found @ offset 2fec0 size 10000
> > Manufacturer: ef
> > SF: Detected W25Q128 with sector size 0x1000, total 0x1000000
> > FCH SPI: Too much to write. Does your SPI chip driver use spi_crop_chunk()?
> > SF: Failed to send command 06: 1
> > FCH SPI: Too much to write. Does your SPI chip driver use spi_crop_chunk()?
> > SF: Failed to send command 06: 1
> >
> > Also ... "Too much to write" ... I'll submit a CL but, folks, "Too much to
> > write"? How about some numbers on this kind of message :-)

new problem with KGPE-d16

[ron minnich]

yes I do. I'm working from ToT. Bisecting now

On Mon, Jan 9, 2017 at 2:37 PM Nico Huber  wrote:
> IIRC, https://review.coreboot.org/#/c/17910/ fixed something similar.
> It's merged yet, do you have it applied?
>
> Nico
>
> On 09.01.2017 23:27, David Hendricks via coreboot wrote:
> > Iru had a similar problem very recently:
> > https://www.coreboot.org/pipermail/coreboot/2017-January/082806.html
> >
> > Iru - Were you able to resolve the issue you saw?
> >
> > On Mon, Jan 9, 2017 at 2:13 PM, ron minnich  wrote:
> > > what's weird is coreboot is unchanged, just the payload.
> > >
> > > I am wondering if anyone recognizes this
> > >
> > > IMD small region:
> > >   IMD ROOT    0. bfffec00 00000400
> > >   ROMSTAGE    1. bfffebe0 00000004
> > >   GDT         2. bfffe9e0 00000200
> > > Writing AMD DCT configuration to Flash
> > > CBFS: 'Master Header Locator' located CBFS at [100:ffffc0)
> > > CBFS: Locating 's3nv'
> > > CBFS: Found @ offset 2fec0 size 10000
> > > Manufacturer: ef
> > > SF: Detected W25Q128 with sector size 0x1000, total 0x1000000
> > > FCH SPI: Too much to write. Does your SPI chip driver use
>
> spi_crop_chunk()?
> > > SF: Failed to send command 06: 1
> > > FCH SPI: Too much to write. Does your SPI chip driver use
>
> spi_crop_chunk()?
> > > SF: Failed to send command 06: 1
> > >
> > > Also ... "Too much to write" ... I'll submit a CL but, folks, "Too much
>
> to
> > > write"? How about some numbers on this kind of message :-)