[LinuxBIOS] Porting Linux BIOS to MSI ms7250 (k9n platinum) motherboard

[George V. Adamov]

Porting LinuxBios on MSI ms7250 motherbord
I have a problem - after memory initialization, it goes to soft reset...
So far have no idea why...


LinuxBIOS-2.0.0_Fallback Thu Jun 28 12:26:54 UTC 2007 starting...
core0 started:
SBLink=00
NC node|link=00
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
333Mhz
Interleaved
RAM: 0x00100000 KB
Ram3
Initializing memory:  done
Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=aeDQS 
Training:tsc[00]=000000000ee58519
DQS Training:tsc[01]=000ceea800001000
DQS Training:tsc[02]=000ceea48000c298
DQS Training:tsc[03]=000ceeb0ffff03da
DQS Training:tsc[04]=000000001065ffaf
Ram4
v_esp=000cefe4
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region:


INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...

[yhlu]

it mean your mem is not initilized properly.

socket AM2 or Socket F? you need to specify that in MB Config.lb

YH