[PATCH] More kconfig fixes

[Uwe Hermann]

See patch.

Uwe.

[Myles Watson]

> Set CONFIG_PIRQ_ROUTE=1 for boards which have an irq_tables.c but
>  for some reason had CONFIG_PIRQ_ROUTE=0.
>  For EPIA-M700 I'm not sure it should be used at all, as this board has
>  ACPI tables (?)

I don't think we should do this, unless it's been boot tested.  If the
default was not to use it with newconfig, it could be broken.  Right now
we're trying to match newconfig.

The other parts:
Acked-by: Myles Watson

Thanks,
Myles

[Uwe Hermann]

On Thu, Oct 08, 2009 at 09:07:40AM -0600, Myles Watson wrote:
> > Set CONFIG_PIRQ_ROUTE=1 for boards which have an irq_tables.c but
> >  for some reason had CONFIG_PIRQ_ROUTE=0.
> >  For EPIA-M700 I'm not sure it should be used at all, as this board has
> >  ACPI tables (?)
>
> I don't think we should do this, unless it's been boot tested.  If the
> default was not to use it with newconfig, it could be broken.  Right now
> we're trying to match newconfig.

Yep, converted to TODO comments for now (Except for one board which
actually set the variable first to 0, then to 1 in the same file, where
I assume the second overrides the first).
> Acked-by: Myles Watson

Thanks, r4749.

Uwe.