Re: [coreboot] Query regarding coreboot for new intel customized board

[Mayuri Tendulkar]

Thanks. I will check on this option.

I am trying putty only to check serial o/p.

From: Zoran Stojsavljevic [mailto:[e-mail]]
Sent: 26 May 2016 12:13
To: Mayuri Tendulkar <mayuri.tendulkar(a)aricent.com>
Cc: Wim Vervoorn <wvervoorn(a)eltan.com>om>; coreboot <coreboot(a)coreboot.org>
Subject: Re: [coreboot] Query regarding coreboot for new intel customized board

Hello Mayuri,

You need to play (maybe, just a kludge) a bit with Coreboot "make menuconfig",
and there with console setup:

[Inline image 1]

You also might want to install on your Linux distro PuTTY console (given UBUNTU apt-get
and Fedora dnf commands), to set your Rx terminal correctly (at least, I know PuTTY well,
always worked for me):

sudo apt-get/dnf install putty

Zoran

On Thu, May 26, 2016 at 6:33 AM, Mayuri Tendulkar
<[e-mail]<mailto:[e-mail]>> wrote:
Thanks Vim.

Currently I am not able to get any serial prints out on my reference board.

My board is based on Intel ISX board based on Baytrail-I soc E3825 given below.

https://www-ssl.intel.com/content/www/us/en/embedded/design-tools/evaluatio…

I have built coreboot for this, but unable to get serial prints.

How I should debug this further.

Regards
Mayuri

From: Wim Vervoorn [mailto:[e-mail]<mailto:[e-mail]>]
Sent: 24 May 2016 13:26
To: Mayuri Tendulkar
<[e-mail]<mailto:[e-mail]>>
Subject: Re: Query regarding coreboot for new intel customized board

Hello Mayuri,

If your rom image is the same it could be due to the lack of support for the flash device
you are using. The MRC cache is preserved in flash so you need to be able to write it.

For the others the numbers etc you mention are informational for the OS. They are not
strictly required but the OS builds a registry of the items it retrieves from the SMBIOS.
If you don’t require this you could also disable the functionality.


Best Regards,
Wim Vervoorn

Eltan B.V.
Ambachtstraat 23
5481 SM Schijndel
The Netherlands

T : [phone]
E : [e-mail]<mailto:[e-mail]>
W : http://www.eltan.com
"THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED
RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE
RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE
[phone]<tel:%2B31-%280%2973-5944664> OR REPLY EMAIL, AND IMMEDIATELY
DELETE THIS MESSAGE AND ALL COPIES."





From: coreboot [mailto:[e-mail]] On Behalf Of Mayuri Tendulkar
Sent: Tuesday, May 24, 2016 7:26 AM
To: coreboot <[e-mail]<mailto:[e-mail]>>
Subject: [coreboot] Query regarding coreboot for new intel customized board

Hi team

I am working on building coreboot for one of our customized board. This is based on Intel
ISX board reference design, reference can be taken as Minnowboard or BayleyBay CRB.

As per documentation given under coreboot, I created folder with my board name under
src/intel/mainboard/xxx and did changes required.

If I tried the coreboot with these changes on minnowboard, it got stuck at FSP MRC Cache
not found.

But if the same code changes I copied under  src/intel/mainboard/minnowmax and built, it
booted fine.

I would like to know what is the importance of these board names, SMBIOS table name,
serial no which are defined for Minnowmax.

Is there some master registry where all these are stored, and if any new entry comes, how
we should add it.

Regards
Mayuri


"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the
use of the individual to whom it is addressed. It may contain privileged or confidential
information and should not be circulated or used for any purpose other than for what it is
intended. If you have received this message in error, please notify the originator
immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message.
Aricent accepts no responsibility for loss or damage arising from the use of the
information transmitted by this email including damage from virus."
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the
use of the individual to whom it is addressed. It may contain privileged or confidential
information and should not be circulated or used for any purpose other than for what it is
intended. If you have received this message in error, please notify the originator
immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message.
Aricent accepts no responsibility for loss or damage arising from the use of the
information transmitted by this email including damage from virus."

--
coreboot mailing list: [e-mail]<mailto:[e-mail]>
https://www.coreboot.org/mailman/listinfo/coreboot

"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the
use of the individual to whom it is addressed. It may contain privileged or confidential
information and should not be circulated or used for any purpose other than for what it is
intended. If you have received this message in error, please notify the originator
immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message.
Aricent accepts no responsibility for loss or damage arising from the use of the
information transmitted by this email including damage from virus."